I've been trying to install Android via NAND and it goes really bad for me.
Starting doing it step by step and then suddenly...
When installing MAGLDR111 got white screen with HTC logo and nothing else happened, can't reach MAGLDR boot load screen.
Can somebody help getting back to life my phone?
btw: radio WAS 2.15.50... and had a HSPL which was needed for MAGLDR.
I'm really desperate, so any help will be great.
Thanks
batov said:
I've been trying to install Android via NAND and it goes really bad for me.
Starting doing it step by step and then suddenly...
When installing MAGLDR111 got white screen with HTC logo and nothing else happened, can't reach MAGLDR boot load screen.
Can somebody help getting back to life my phone?
btw: radio WAS 2.15.50... and had a HSPL which was needed for MAGLDR.
I'm really desperate, so any help will be great.
Thanks
Click to expand...
Click to collapse
1. Remove the battery
2. Put the battery back in
3. While pressing the power button (red - end call button), keep pressing the volume down button. Do that simultaneously and it shall take you into bootloader.
4. Run Task 29
5. Install MAGDLR
6. Install NAND as stated in tutorial
Ok, i've just did what you told, but what is a task 29?
Sorry for all those questions, but I really want my toy back...
nicedude_abad - tanks man!!!
I've just bring it back to life, but not without your help!
Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
Hello, I am in need of some help. My htc hd2 got stuck on the MAGDLR loader and everytime I try to load android it goes through all steps, tells me it completes, Phone restarts, and then goes back to the MAGDLR loader. If somebody could get me out that would be great
[email protected] said:
Hello, I am in need of some help. My htc hd2 got stuck on the MAGDLR loader and everytime I try to load android it goes through all steps, tells me it completes, Phone restarts, and then goes back to the MAGDLR loader. If somebody could get me out that would be great
Click to expand...
Click to collapse
It would help someone help you if you gave more info on the problem... like what exactly are you trying to load? Android from SD or nand? What build? What steps does it go through and complete?
first take the SD card out and back up your data i.e. sounds, photos, etc
1. go into bootloader (the screen with the red background, you can do this by holding the power on button down and the volume down button both together at the same time)
2. install task29 you can do this from the bootloader screen
3. reinstall magldr
4. reinstall a nand ROM
How to finish with that stcuking thing !
Hi,
I hope the following may help you :
The most important thing to notice is to flash a Radio ROM that supports 576RAM (don't ask me... :-D ).
The Good news are that the HTC Leo Radio 2.15.50.14 will.
So you can flash that radio right after running HSPL3.
MAGDL1.13 should work for as it did for me.
Good luck.
The post above mine seems to be the best route good luck.
After flashing MAGLDR113 to install an NAND build my htc get freezed in the startingscreen. I can´t get into the bootloader and i also can´t do an hardreset.
What else can i do to get my hd2 working? I hope you can help me.
maybe usefull:
radio rom 2.15.50.14
Goatrip stock rom
greets schueffi
phone completely off
press power to turn on, but keep it pressed, dont let go.
phone will vibrate as it starts, then you see the first boot screen, (keeping power pressed still) then the screen jumps black with yellow at teh top, keep pressing power until teh menu items apear.
thanks but i´ve tryed that for many times but nothing happend...
is it possible to flash an rom without getting into the bootloader?
have anyone an other idea what i can do?
Not sure if this will help you, but I was being a noob and trying to use the touchscreen with magldr to select a menu item, but you're meant to use the volume up and down keys and the call button to select an item. To flash, select usb flasher. Hopefully that was of help
Hi, is there a solution for this? I have the same problem.
I wanted to install NAND Android on my HTC HD2 device actually running WM and Android on an SD card. I followed all the steps carefully:
I flashed HARDSPL with HSPL4
I updated the Radio version to 2.15.50.14
I installed MAGLDR113 and the installation gave me no problems, but when rebooting, the phone gets stuck in the initial screen and it doesn't either boot or let me go to the boot menu no matter for how long I press the power or the down volume button.
Anybody can help?
Thanks
EDIT: I have a guess about the cause of all these issues. It looks as if the phone behaves like the "call" button is being in a pressed state all the time. If the result of the below listed steps is the same when doing them, but with the "call" button pressed, that would confirm it. Can someone please do it?
EDIT2:
Success! Well, kind of. I downloaded Copes CyanogenMod 7 v 02/04/11 [Kernel: AmeriCanAndroid HK853+] SD MAGLDR ROM. I went through all the steps, and then realised there is a rel_path set in startup.txt. I removed it, since I'm doing everything in the sd root directory (as I can't select anything in the MAGLDR menu), and tried to boot. It got past the GO!GO!GO!, and booted Android. Unfortunately, as I feared, the digitizer is not working and I can't select the setup wizard in the dialog that is presented on first boot. I now took the battery out and back in, and it seems the boot process is stuck on htc splash screen, which is shown *after* the GO!GO!GO!. I guess it's all down to hardware now.
--
I got this HD2 the other day in an unbootable state. When I turn it on, first I get the HTC splash screen, MAGLDR menu appears briefly and then MAGLDR 1.13 tries to boot Android form the SD card. However, there is no kernel on the SD CARD, the error about it is shown on the screen and then MAGLDR menu is briefly shown again and the same thing repeats over and over. What I tried is the following:
1) holding down the power button while booting to get the MAGLDR menu, but the same thing happens
2) pressing some buttons -> while holding down the windows button, MAGLDR menu is presented. If I press the volume down button, the loop continues, if I press the volume up button, it tries to boot Windows Phone 7, but it can't find any. If I just let go the windows button, the loop continues
3) putting android on an SD Card - I chose the BoxmaX ROM - I took all the files from BoxmaX.KS.v8.6.KH8.5.1.rar\Android folder and put them to the root of the SD Card - now MAGLDR finds the kernel, boots it, but is then stuck on the GO!GO!GO! line
4) holding the volume key down and pressing end-call button, in order to get to the boot screen and see the radio version and try to flash the WinMo ROM - I can't get to the bootloader, it never shows. Instead I get the splash screen and the MAGLDR as usual
5) come to XDA and ask for help - so, what are my options now? Is there any way to get it to work?
The thing about the phone is that it could have been partially disassembled, so maybe some buttons don't work because of it (I suspect the volume down button, but it reacts while holding the win key). The digitizer too, is probably not responding, but I can't get to any screen where I could be able to test it.
P.S. I'm a HD2 newbie, never had it before, so please forgive any beginners mistakes.
Just a question.. you prefer booting from SD or the phone?
Right now I don't care. I just want to make it do something. In general, I prefer booting from NAND.
Have you try reinstalling magloader?
I'm not at home right now, but for sure we will get this to run... I will give you one big instruction rather asking you single questions... we will start from scratch... 3 steps
Brb 4hrs unless you found your answer
Booting from nand
1. Reinstall hspl... make sure its the right one for your phone. Get in bootloader to do this.
2. Reinstall magloader... 1.13... I believe that's the one...
3. Install a DAF version of rom... then we will get clock work on there since that's the preferred way of flashing rom IMO.
Hope this help you get started... ill keep checking back on you.
Thanx for your help. See my second edit in the first post.
Unfortunately I still can't enter the bootloader, so I can't flash either HSPL, or a WinMo 6.5 ROM.
Notice you say call button seems to be in pressed mode... if that's the cause try to get that fix... to get to it you have to remove digitizer... getting that fix that will help a lot.
I never mess with SD boot so I would not know how to help you in that but if its a nand boot... I know
you might have got the wrong daf configurations or defective hspl or magldr
Have you checked your battery pins to see if one is bent slightly. one of the battery pins being bent has been know to cause boot loops. Worth a good look at the battery pins for sure....
Thank you all for the advice. I disassembled the phone today, disconnected the keypad flex cable, tried powering it on with the volume button pressed and, lo and behold, bootloader screen appeared. So, I'll order a new keypad flex cable, and try it then.
alh84001 said:
Thank you all for the advice. I disassembled the phone today, disconnected the keypad flex cable, tried powering it on with the volume button pressed and, lo and behold, bootloader screen appeared. So, I'll order a new keypad flex cable, and try it then.
Click to expand...
Click to collapse
Ciao!
I have same problem...
But my volume button right works with normal multimedia or phone calls...
Do you think I need too a new cable?
:-?
(excuse me for my english!)
help urgent
can someone help me i got an htc t8585 bouygue telecome french but when i install magldr phone restart successfull and hang on htc logo
how to do? excuse for my english
amsizi said:
can someone help me i got an htc t8585 bouygue telecome french but when i install magldr phone restart successfull and hang on htc logo
how to do? excuse for my english
Click to expand...
Click to collapse
Welcome to the forum. What radio do you have? Switch on while holding volume down and tell us exactly what is on the bootloader screen. I think that is right.
For more info
my bootloader show PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0*05
CotullaHSPL 0*50
I still think it is your radio, see https://forum.xda-developers.com/showthread.php?t=1021837 and https://forum.xda-developers.com/showthread.php?t=611787
First things first.....first post!
Ok so I have the HD2 512 version and have put hspl 2.08 on it with no problems but when I have tried loading magldr1.13 the install seems to go ok on the phone but when it reboots magldr doesnt launch it simply stays on the default white htc launch screen.
My own fault for following a youtube video I guess.
The handset lets me reflash magldr which I did a couple of times and I tried an older version of magldr and also used the nand toolkit to try and install magldr but still the same white screen on launch.
Any ideas whats going on anyone? help appreciated with thanks
PeteLeMeat said:
First things first.....first post!
Ok so I have the HD2 512 version and have put hspl 2.08 on it with no problems but when I have tried loading magldr1.13 the install seems to go ok on the phone but when it reboots magldr doesnt launch it simply stays on the default white htc launch screen.
My own fault for following a youtube video I guess.
The handset lets me reflash magldr which I did a couple of times and I tried an older version of magldr and also used the nand toolkit to try and install magldr but still the same white screen on launch.
Any ideas whats going on anyone? help appreciated with thanks
Click to expand...
Click to collapse
Are you sure you installed HSPL correct? Hold down the volume button and press the power button, till the rainbow screen, does it say something about cotulla hspl? If yes, connect the phone to the computer(still in the rainbow screen of course) and wipe the device(task29). After that your device will be totally clean and the correct radio is installed. So you will have to press the volume down button again to enter the rainbow screen and then install magldr.
Yes it does say cotulla.
So I tried what you said I connected in rainbow screen and pressed wipe(task 29) in the nand toolkit (wipe from the toolkit right?) but in the rainbow screen it says cotulla still,
tried magldr again, same white screen
when you saying "launching Mgldr", are you pressing the power button(end key) when the phone boots? this way only you enter Mgldr and loads the menu
Yes I have tried holding the power button on powering on the device and tried it without holding, still the same white htc screen and no movement from there.
When I wipe the handset it still has SPL-2.08.HSPL on it and still says CollutaHSPL.
I'm guessing I should try and restart from scratch??
you havent flashed a compatible radio yet, , magldr wont start without it.
enter bootloader
usb
flash radio 2.15.50
reboot
magldr.
Ok I will try that now. Is radio 2.15.50.14 ok?
Wahey! I'm in!
Thanks very much you guys are legends!
Right next step haha. Don't worry I'll read up on it don't want to hassle anyone.
Any suggestions what are the best roms for WP7 or ICS??
(and if you have time point me in the right direction of them)
Any other step I am missing?
Again thanks for your help
Different people, different needs
Check some threads (also Search, will not hurt you )
http://forum.xda-developers.com/showthread.php?t=1656171
http://forum.xda-developers.com/showthread.php?t=1430276
http://forum.xda-developers.com/showthread.php?t=955268
http://forum.xda-developers.com/showthread.php?t=1678153
http://forum.xda-developers.com/showthread.php?t=1670456
Flashing guides - in my signature