[Q] Google apps issues - Droid Eris Android Development

So i'm trying to install KaosGingerbread and cannot get Google apps installed.
I've tried the 12/18 one and it causes a boot loop. Then I tried the 12/28 ones and it flashes, loads, but the google apps dont show up. not even the setup wizard runs. anyone got any suggestions?
I've tried an older version of KGB, i've tried formatting my sdcard, deleted the /sdcard/android-secure folder. but to NO avail. i've looked at the celb thread because i saw a few posts about that a week ago but none of the solutions there worked.
the latest Gapps 12/28 doesnt even flash over celb but the 12/18 one does. anyone have an idea why this is happening?
EDIT: at the advice of someone from the CELB thread i installed clockwork via rom manager booted to recovery from the end button it boots to amon-ra, went into rom manager it boots to clockwork, rebooted because i accidentally went from wipe(because of the damned 9 no's before a yes) and double clicked to reboot and just battery pulled and it booted to ra again.....so i somehow have 2 recovery's installed.....
EDIT 2: okay when i clicked boot to recovery from rom manager again it went into ra, unpacked clockwork and then booted into clockwork.....(after saying it replaced the stock recovery)
EDIT 3: still didnt work going to try to find a different version of the 12/28 package and compare md5's

FWIW, what you are experiencing with Clockwork is the way it is supposed to work: you launch it from within ROM Manager. If you cold-boot the recovery partition, you will get Amon_RA. It didn't work that way in the distant past, but that's the way it works now.
Part of the confusion results from the fact that the program which manages the on-screen menus is /sbin/recovery - when Rom Manager says "replace the recovery", it means that program, not the entire recovery partition. That's why you see the Amon_RA menu appear briefly - and then it disappears and gets replaced by the ClockworkMod (/sbin/recovery) menu.
All of this happens in the booted ramdisk - so the the recovery partition is untouched, and ClockworkMod only lasts for that boot.

Try doing this :
1. flash KGB and before rebooting flash the gapps pack from recovery
2. reboot
3. enjoy kaos goodness (i also recommend having setcpu clocked to 710 to get the lag down)

jrozga said:
Try doing this :
1. flash KGB and before rebooting flash the gapps pack from recovery
2. reboot
3. enjoy kaos goodness (i also recommend having setcpu clocked to 710 to get the lag down)
Click to expand...
Click to collapse
flashing gapps before reboot causes a bootloop

Related

Clockwork Mod recovery mode ??????

I am having a problem accessing clockwork mod recovery mode, no matter what process i try it consistently takes me to android recovery instead.
info:
samsung fascinate
rooted
Did odin flash back to stock
Did factory reset back to stock
Did software ota update to the following specs:
HV i500.04
M# sc i500
Firmware 2.1 update 1
Baseband S: 1500.04VD101
Kernel 2.6.29
Build SCH i500 DH101
Installed CWm Recovery from market
Installed Asto file manager from market
Installed Titanium backup from market
Opened CWM application
Went through root permissions dialogue
Flashed CWM recovery to 2.5.1.0
Next i clicked on BACK UP ROM which reboots me into Android Recovery Mode and gives me the standard 4 options for the fascinate:, plus it says installation was aborted:
1.After failing to find update package
2. open update package
3. verify update package
At this point i click on the home button and reboot system now.
Next i try flashing a different CWM Recovery version to 2.5.1.1 , 2.5.1.3 , 2.5.1.4 , all resulting in and error message, so i am still using 2.5.1.0
Next i try toclick on manage and restore backups but there are no backups listed even thouigh i did back up Rom earlier.
next i try to install the Geeknik ROM( Stupidfast v1.23(D101) from the Download ROM section.
I click OK to dialogue box that ask do i want to Down Load Rom
The Stupidfast ROM download starts and finishes
Notification bar says download is complete so i click on notification bar and this takes me to dialogue box which asks do i want to back up existing rom and wipe data and cache . i say yes to both and click OK.
Next dialogue box asks do i want tot reboot. i click Ok
i am then taken back to Android System recovery.
No matter what i do in Clockwork Recovery i always end up back at Anroid System Recovery. i have tried all different scenarios -debugging checked.debugging unchecked,clear cache, dont clear cache, back up rom,dont back up rom, usb connected, usb unconnected, Titanium in,titanium out. watched all different you tube videos on subject.
sorry this was so long. i didnt want to miss any answers to any question any of you might have if at this point you want to offer any help. thanks in advance.
You have to flash CWM with Odin before you can use it. Can't just install from the market or ROM Manager
Kevin, Thanks for your response to my question.
i thought i already flashed CWMRecovery from within ROM Manager. it is the first option at the top of CWMRecovery, also it states under that first choice that my latest recovery id Clockwork Mod 2.5.1.0.
If i scroll down to the bottom of CWMRecovery the last choice shows all of the CWM Recoveries. Recovery 2.5.1.0 is listed at the bottom and is the only one i can flash/install.
In both instances it says that i have flashed this version(2.5.1.0) of CWM Recovery.
I will try whhat you are suggesting and thanks again for the help, it is appreciated
Kevin , I followed your instructions and flashed the CWMrecovery.tar file with Odin3_1.3 and everything is as it should be. The funny thing is (at least to me) that the CWMrecovery version that is listed when i am in recovery mode now is CWM version 2.5.1.0, which is the same version that i flashed within rom manager. Kind of confusing but at least i am where i want to be. Thanks again for the help.
Yeah, it's just one of the quirks with the Fascinate. Unlike most devices, just flashing Clockwork with ROM Manager only puts the update.zip on your SD card. Using Odin to flash the .tar file installs the recovery, so both parts are needed.
where i need to put CWMrecovery.tar in ODIN in which section PDA/PHONE/CSC? 1nx
You only flash things in PDA section, doing otherwise will screw up your phone
Sent from my Fascinate - DJ05/SuperClean/Adryn's 12/30
?
Im kinda new to all this stuff and just wanted to get some step by step stuff if you dont mind. I rooted my Fascinate tried clockwork mod wouldnt work when i tried to backup after downloading the recovery thing and when i read this you guys said something about Odin so I went to appbrain and downloaded tuxility but now im lost on what to do. Maybe something step-by-step would be good. Really appreciate it! (ps: I know im kinda slow but if you wouldnt mind...)
The stock recovery does not allow us to run unsigned zips. Thus, we must flash the CWMrecovery.tar to patch recovery to allow us to run these unsigned zips. Then you can flash CWM from within Rom Manager.
Follow these instructions from fallingup's thread:
http://forum.xda-developers.com/showthread.php?t=788099
THANKS
Thanks ALOT this looks really simple the only thing that idk about is how it said to put it in download mode. Idk what that means. Debugging? and do I mount it? Thats all i think. THANKS agian.
Download mode: power off, pull out battery, with Odin open and USB connected to PC hold volume down and plug in USB.

ROM flashing problems with my EVO :(

Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
guribe94 said:
Ok so I originally rooted my phone and put Fresh ROM on it, there was a little hiccup in the install but I didnt really think much of it, recently when I tried to flash a new ROM (I tried multiple ones just to be sure it wasn't the rom) but whenever I try to flash the ROM (using clockworkmod from recovery mode) it will say the install was successful but when I reboot it will do one of two things: stay on the "HTC EVO 4G" startup screen or continue to turn off and on like its in a bootloop. Does anyone have any ideas whats happening and what I should do? I have tried clearing/wiping all of the options that are available in clockworkmod and even tried using a new SD Card but it still does the same thing
Click to expand...
Click to collapse
Hi there. First off, I need a little more info, like which rom you are trying to flash right now. Also, what radio's and pri do you currently have?(menu>settings>about phone>software info, radio is baseband) If you have the older radio and PRI, (same as the ones in my sig), and you are flashing to a 3.70 software ROM, which most likely you are, you will need to either flash a custom kernel, while in recovery, just after flashing the rom (before you boot). Or upgrade your radios. If you have already updated your radios, and you're still experiencing this, I would first and foremost, switch to Amon Ra recovery (which version of clockwork are you on, btw?). The easiest way to switch to Amon Ra, is to get Rom Manager from the market. Use rom manager to "flash clockworkmod reocovery" (even though you already have clockwork, do this) Then scroll down, and you'll see "flash alternate recovery". Select that, and let it flash Amon Ra for you. Shut the phone down, and manually boot into recovery (vol down+power). Use amon's recovery to do a full wipe, (data, cache, davlik cache x3) Then flash calkulin's format all.zip. That will ensure a good wipe. Then follow my above mentioned instructions, and try again. That should work. If it doesn't, report what the exact errors are here. Good luck
Maybe this is a stupid question, but are you able to nand restore to a rom where your phone will actually boot up?
Calkulin format all zip is your best bet. It will wipe your system data, data, cache and dalvik cache. A full purge.
Just have a good zip like chris sprint lovers rom. And better yet a PC36100.zip from chris all in one update thread.
Sent by my eVo running Vin255764 Plutonium...yup
Here's a few suggestion:
Change your radio version - Some kernels don't work right with the newest, and some don't work right with older ones.
Change your kernel - This is always the best suggestion IMO. For a sense based ROM run one of netarchy's latest kernels. Often a bootloop is because of a kernel/radio issue.
Plus with netarchy and setcpu you'll get some wicked battery life.
Try wiping everything, and then try again. Also try flashing a different rom
having issues flashing myn rom
have 3.7 evo rooted unrevoked3/kernel 15
when i try to flash from clockwork mod it just blinks right quick but doesn't do anything.. all the things are up to date .. can anyone help?
when i flashed amon ra and flashed rom.. it says E: can't find update script..
i dl rom manager and did the alt recovery to amon ra. it still won't flash the rom.. but now i have another problem.. my sd card clockwork back up is not there... and now i can't restore to previous state. i can't get to the regular phone interface. what can i do to restore?

ClockworkMOD now works with 3E recovery?

EDIT: This is not a result of ROM Manager, this is a result of installing Overstock 1.4.3 which also installs CWM recovery.
Not trying to be rude or anything, but I don't remember this ever not working.
I am having issues with 3e. No matter how carefully I follow the instructions (flash->reboot->reinstall packages always fails) when flashing recovery from current Rom Manager and Premium License, it does not work. Additionally, the premium license is persistent in my applications list and no premium ROMs ever show up in my download list. Even when I select Vibrant MTB and either 2.x or 3.x, all I get is a message that states current recovery will be used. I'm still going thru posts for a possible solution.
Try putting this in the root of your internal SD, reboot to recovery and reinstall packages twice.
Yeah, I was misinformed. This is not a result of ROM Manager, this is a result of installing Overstock 1.4.3 which also installs CWM recovery.
If anyone want to do this it is really simple with the SGS kernel flasher app. Download your overstock kernel of choice from here or your choice of kernel that includes CWM from the dev bible, unzip it, move the zimage to the internal phone memory and then choose that file as your kernel with the SGS Flasher.
Note: I have not been successful with going back to stock kernel when I tried to but that may have been because I didn't disable the lag fix.
jneal9 said:
Try putting this in the root of your internal SD, reboot to recovery and reinstall packages twice.
Click to expand...
Click to collapse
I'm 100% stock on 2.2Froyo except for root/unlock and am puzzled by this. I know it's not ROM Manager because it worked on my first SGS4G which died and totally bricked after a week (TMO exchanged it happily cause it wouldn't even go into download mode or charge).
What's in this update you linked? Cause I'm smart, but not as smart as most of the posters here and I recognize only a couple things in the file.
It installs CWM.
Are you using a Vibrant or SGS4G?
SGS 4G for TMobile.
BTW... I totally appreciate the help here. I don't know the ins-n-outs of the android phones like I do IOs, not that I'm all that up to date on that either.
Update... Still does not work. I get the failed signatures error and the update is aborted. I tried doing a factory reset and re-rooting the phone in case something didn't work correctly and get the same error. At this point, it's all gravy since the only thing I really needed was the unlock but now I'm in a "I just want to know how this works" mode.
Thanks for the help.
Ok yeah that my be the problem since that zip is for the Vibrant. So just to be straight, you are unable to get CWM on your SGS4G?
That's correct. I can't apply any update.zip nor does flashing CWM recovery work. It says it's flashing but then when I do the 3 button reboot to get to recovery, it's the 3e version still and when I go to reinstall packages, it starts but then fails as it tries to verify signatures.

Solved:I guess I'm stuck in boot loop....now what?

Ok guys..... newbie here .... literally I'm new to Boot unlocking, root, Flashing etc.
Anyway I have followed this forum for so long that I decided to take plunge yesterday and get my hands dirty.
Here is what I did:
Unlock bootloader, root and install recovery on my Atrix 4G. Atrix was @ 2.3.4 and 4.5.91 during unlocking & root.
Rebooted the phone and everything seems to be in place. Atrix loaded like the way I bought it 7 months back. No problem until now.
Also created a restore folder on my external SD. Worked fine and was successful in creating backup with time stamp
Now here are my steps and subsequent issues that I'm facing:
1. Downloaded CM9 zip file from this thread(http://forum.xda-developers.com/showthread.php?t=1500535) along with Gapps to my external SD
2.Entered recovery mode during bootup and tried to flash CM9 and Gapps. Flashing seem to have gone well and completed (note I did not do clear data, clear cache or clear dalvik cache under advanced options being a newbie)
3. Reboot the phone and can only see red Moto logo and unlocked on top. Left for about 5 minutes and nothing happened.
4.Did a battery pull and entered recovery mode. wiped data, cache & cleared dalvik cache
5.Went to Install zip from sdcard option and tried to reflash CM9. Flashing seems to have gone well and completed
6. Reboot phone and again can only see Moto Red logo with unlock on top and nothing more.
7.Battery pull followed by recovery. But This time I tried to restore from my external SD. also wiped data, cache & dalvik cache
8.Restore took about 3 minutes and completed.
9.Reboot the phone. Now the phone boots and goes to Rethink possible screen and get sstuck.
10. Left it for 1 hr....nothing.
11.tried steps 7-9 again and still stuck in "Rethink possible" screen during boot.
What did I do wrong? Did I soft brick the phone? I can still enter recovery mode and read my internal and external SD and can see all files. i hope I didn't brick my phone doing this. If I did, I would regret!
Here are my options:
1.Try a stable ROM like CM7 and see what happens. I didn't want to do too much damage so haven't tried this option yet.
2.I know there is a way to hide 'unlock' during boot up (if someone can point to it obviously). Hide the 'unlock' and return the phone to ATT and tell them that phone would not boot after 2.3.6 update and get a refurbished one
Please let me know what your thoughts are. I'm currently crapping on my pants
Edit: I just tried Newtrino rom and stuck @ Moto screen which says unlock.
Edit 3/4/2012: Please go to the last post for the solution. Tenfar's CWM is old and cannot deal with latest ROMs. Use ROMRACERS latest CWM or touch based Koush's CWM for future ROM flashing.
Old CWMs will give you sleepless nights!
Ok tried restore again after wiping data, cache & dalvik cache.
Now after reboot, My Moto Logo screen says unlock and just starts flashing.
I can still get into recovery......
can someone please help me......
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
vsg005 said:
What you can do is: install a "stable" ROM of Gingerbread:
--Go in recovery, put a .zip of the ROM on your sdcard (with your computer), and after wiping data, install it .zip.
--Or you install a new ROM with fastboot
Anyway, be careful with your battery, because if it is empty, with no ROM on your phone, it'll be crap!
Click to expand...
Click to collapse
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Masterguy said:
thank you for your response. However I tried that already Nutrino GB ROM. Again, I would go to 'M' screen which says unlocked and its stuck there for ever.
I used tenfar's CWM. Not sure if I need to use any other CWM. Also since my phone doesn't boot, I'm not sure how I can install any other CWM
Click to expand...
Click to collapse
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
littleemp said:
Don't worry, soft bricks are easy to recover on the Atrix thanks to us being able to access fastboot.
For flashing a new recovery:
While your phone is off, press Volume Up + Power to power up, then release when a menu appears on your screen and navigate with volume down until you see Fastboot, select it with the volume up key.
Get the necessary files for fastboot, place them all in a folder called "moto" in your C: drive, and type in the following in a cmd window (assuming you're using windows and that the recovery image is called recovery.img):
C:/Moto> fastboot flash recovery recovery.img
C:/Moto> fastboot -w
C:/Moto> fastboot reboot
Now access your recovery wipe dalvik cache, cache, factory reset and then flash a new ROM. It SHOULD boot without issues. I personally use Koush's Clockworkmod Touch, also remember that Neutrino tends to get "stuck" sometimes after the first attempt to boot and requires a battery pull and then you try to boot again. (It takes a while)
Click to expand...
Click to collapse
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
flash the latest recovery and wipe everything in recovery and flash neutrino again. It should work after that. try neutrino 2.2 though. 2.5 still has it's kinks.
1st off, relax. It's difficult to brick your phone from this point Just don't get any bright ideas with .sbfs lol.
As others have said, make sure you're on latest recovery.
Question: are you installing from internal or external SD? Internal is recommended for flashing most ROMs.
Sent from my MB860 using xda premium
Masterguy said:
Many people also seem to have suggested RACEROM CWM. Which one would you suggest? I'm so nervous about all this now. Just have this butterfly in my stomach
Click to expand...
Click to collapse
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Solved:boot loop issue
littleemp said:
As someone else said, the ONLY thing you should NEVER do is flash an .sbf or go through an OTA update, that's a surefire way to hard brick your phone. From this point on it's VERY DIFFICULT to completely brick your phone using software only.
RomRacer's CWM is based I think on v5.0.2.7? Koush's latest recovery is v5.8.1.5. I honestly couldn't name any tangible differences other than the touch interface, which is the reason I use it in the first place. (I hate mashing volume keys like a madman) It really doesn't matter which CWM you use, but when I soft bricked my phone I recovered with CWM Touch.
I would recharge your battery to 100% before trying to recover it, as that is one less headache to worry about, but if your phone starts saying 'Battery is too low to flash', do not panic, you only need a USB cable you don't mind sacrificing (doesn't have to be new). I will go into detail in case you actually need to do this.
Just make sure you use the fastboot -w command and wipe EVERYTHING through CWM before trying to flash anything else.
Click to expand...
Click to collapse
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Masterguy said:
Thanks I was able to fix my boot up issue using ROMRACERS CWM. I didn't use any command prompt or anything. I just downloaded zip file from this thread, entered recovery mode -->Install Zip from SD card --> Chose ROMRACERS zip --> it automatically flashed the recovery and I then rebooted recovery under advanced options.
After that Wiped data,cache & Dalvik Cache and proceeded to install CM9 and it booted up up flawlessly.
I'm kind of surprised that tenfar didn't add a not to use his CWM as the latest ROMs use latest ext format.
That seems to be issue. However, I'm pleased with your guidance and final output. Thanks a lot dude.
Click to expand...
Click to collapse
Thank you sooo much. I was having this exact problem. I did what you suggested and my phone works. Thanks!

[INFO/DISCUSSION] ClockWorkMod Recovery 5.5.0.4 Tf101

PLEASE USE THE CWM UPDATE BY KOUSH ONLY.. ALSO, PLEASE BE ADVISED THAT CWM VERSION 5.5.0.4 has been reported to have some freeze issues, contact Koush and forward a logcat or provide information so he can resolve. Until then, use an earlier version until all the bugs are gone..... thank you--- oka1 moderator
​
Today I noticed That Koush Has released CWM 5.5.04 for Our device. So simply You can Download Rom manager from Market and then just install the CWM.
AllCredits go to KOUSH.
Here IS the .img file.
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.5.0.4-tf101.img
Installed fine. Reboot to recovery still doesn't work for me. Still works fine when using the app from the market though. Thanks for the heads up.
Reboot to recovery messed up my tab, so it would only boot into recovery (booting to Android was done manually).
works either manually or via market app reboot to recovery, via ClockworkMod restart the system, is not in recovery
"reboot system now" does not work, reboot into recovery again.
Same to me on my tab. Don't install it yet.
Unable to install either through rom manager
or
Terminal method
Rom manger says it installed it but when I reboot to revocery (via another app)
it's still the old one
Terminal emulator says image not found no matter where I store it or what directory I point to
Seems like I'm missing something.
The linked .img file is a blob file with the SOS partition. It can be flashed through the staging partition. If you extract it or strip out the header, it will be a regular .img file that can be flashed through cwm (with a little work).
I haven't flashed it yet.
Same here, unable to boot android again (recovery loop), is there any way to flash the old one from adb?
Thanks
bug
since i have instal it i can't go out of the recovery when i do restart and it reboot in recovery again
go out by pressing power button + volume down , wait a moment and you can select recovery or boot android os
If you go into advanced there's no option to return.
Wasn't there a bug about installing recovery with Rom Manager that causes constant boots into recovery?
let me look...
EDIT: This may or may not apply, but ...
http://forum.xda-developers.com/showthread.php?t=151963
Official, yes, see here the 5.5.0.4 for tf101, the .img and .zip:
http://download.clockworkmod.com/recoveries/
I should have read more of this thread before flashing. Because now mine does what everyone else is doing. Goes back into the recovery in a loop..
If You have problems return to the older:
http://forum.xda-developers.com/showthread.php?t=1346180
=================
mine flashed fine from rom manager pro on Eos-tf101-5 All menu's seem to work fine, but there is no external SD access only internal. Still can't access recovery from rom manager but that's the same standard issue with the rom.
it support tf101g or not ?
Cant flash a new recovery either.
Tried reflashing rogue and still boot loops into cwm.
Downloaded current cwm from web link above and flashed. Still boot loops into recovery.
Sent from my Transformer TF101 using Tapatalk
I would love to go back to the older one...But my Tab doesnt show the sdcard at all. Only internal memory...weird
Flashing the IMG via NVFLASH broke recovery for me. Installing it through ROM Managers works fine.

Categories

Resources