Database Users

[Q] Phone wont boot after attempting Voodoo Lag Fix

and I am not a happy camper right now. My phone is not bricked but I have tried everything imaginable to get it to boot up but no dice.
After I flashed the fix I couldnt boot past recovery and I couldnt but up into clockwork because I hate replace the update.zip with the the lag fix. So I used Odin to try to reflash back to stock without removing the lag fix (there was no way for me to).When Odin rebooted my phone and tried to wipe my data I realized it failed for some reason and then rebooted again. But it only got past the swirly S animation screen but the screen goes black after that. Cant get farther then that no matter what I do... Tried Odin multiple times but its the same result. Tried wiping data and cache manually through recovery but still not working.
Any suggestions?? Some quick facts that could help...
-I can get into recovery
-I can get into download mode
-I can use Odin
-Vibrant drivers are installed on my computer
-I have ADB installed

Ok I see theres a repartition option in Odin if I do that Im pretty sure ill be set if I check that since it will remove the lag fix but Ill end up losing all of my data. Is there any way for me to to copy the files in my internal sd card to my computer in the current state my phone is in??
Ok... tried mount USB storage but my computer isnt recognizing is it.

Nope, sorry. We don't really have a way to communicate with the file system unless the OS is booted and the proper drivers are loaded.
I guess if anything good comes of this it's that you know to back up often now though! You have to flash the "Eugene's Froyo that doesn't brick" rom, then flash back to stock JFD or JI6, but you sound pretty informed so you probably already knew that.

I see thats to bad, the Amon's recovery for the G1 allowed you to view files in it. But no I never knew that you should flash Eugene before going back to stock. I've flashed back to stock from Axura before with no problems before. Still this gives me some hope because Im sure the problem is the lagfix I tried and maybe it will play nicely with Eugene's ROM.
EDIT: And it worked!! Thanks bud just goes to show any little bit of info could make a difference Lost all my files though but oh well, lesson learned.

help(resolved)

Hey I just seriously screwed my self over bassicly I tried to get miui to boot from the samsung fascinate however when I installed it in cmr it spassed out then powered of then went to the bootloader and I get a red error message saying can't mount data or something so then I tried to reinstall Eco 3 Odin using Odin and it worked it booted but it says I have zero data on my phone and I can't install anything. I also tried the oneclick soft unbricker but it fails saying adb divers are not installed when they are. I'm doing this on my phones browser witch is the only thing that seems to be working right now I also tried a band restore but I got the same data error message.

Have you tried restoring to DL17 and then re-upgrading to 2.2?

And how about a good old odin flash?
In worst case, I would ask imnuts for the full odin package, or use a fascinate full odin package to get you off your feet, then reflash the modem, and recovery, then wipe In recovery cyan cwm... Then flash ec03
Sent from my SCH-I400 using XDA Premium App

wait wait, is this on a Continuum or Fascinate?

Nuckin said:
wait wait, is this on a Continuum or Fascinate?
Click to expand...
Click to collapse
He is on a Continuum, but you can use a fascinate Odin package to reformat partitions if they get messed up, then just reflash recovery and start fresh if you can get in then... That wasn't a really good thing though to suggest to a newcomer necessarily, so thank you for pointing that out

okay heres what happened firts i wanted to see if i could get the miui rom for the samsung fascinate to boot on the continuum there pretty much the same phone minus the ticker and screen size so i went into clockwork mod and wiped everything then went to install zip from sd card and clicked on the miui rom witch was the process we always used on the hero. then after i clicked on it, it started to install then my screen started shacking and my phone turned off. when i turned it back on it when to the bootloader and a red error message poped up saying
e:cant mount /dev/blockstill(invalid argument
and when i go to recovery it says the same thing when i try to wipe/restore nand it says the same thing. so at that point i powered off and went to download mode and reinstalled eco3 odin using pda mode on odin and it worked then it rebooted and i got to the set up screen and i got 2 force closes daily brefeing and something else i went ahead and skipped all that stuff and it loaded fine after that. however now for some reason it says i have zero system memory so i cant install any apps or save data however it does recognize my sd card but i cant install to sd card. so bassicly the phone functions just no internal memory. at this point i honestly dont know what to do everything on the hero was simple and straight forward and we never ran into these kind of problems. ive also tried to restore my nands and reinstall clockwork mod but still no dice. what i need to do now i guess is get the necessary files to go completely stock and see if that helps. and if someone could point me in the direction to those files i would really aprechiate it. oh and i tried the one click unbricker it sayed success but didnt really do anything.
oh and i know trying to install miui was stupid but i was just wanting to see if it would boot lol.

Download the PIT file in the Development forum, as well as the DL17 Odin package from the FAQ of the EC03 post I made. Flash the DL17 in PDA, with the PIT, and re-partition selected. After that, you should be back on DL17, and can do whatever you want from there.

huzzza!!!
thank god that worked thank yall so much i still cant believe that just happened but restoring the stock odin image worked and all is well. so i guess tommorow i can reroot and restore my nand.
once again thank yall for the help.

Cant get Vibrant to start help plz!

Ok i was on ICS passion then all of a sudden my phone said something about encryption an that it had failed an only option was to reset phone so i hit reset then it went to recovery mode an green android came up with chest open then error message happened an so i booted in to recovery then i try to go in sd an it would not allow me to so i then tried to odin an flashed then i powered on it gies to vibrant screen then it just shuts off so i then flashed Eugene froyo that does not brick then it takes me to stock recovery an says an i cant click on anything in recovery can only move -- movi_checking done!...
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
Here are instructions i have followed an no luck http://forum.xda-developers.com/showthread.php?t=1043892
Ok I think you got some extra cache or some other piece of data that did not get wiped. either way, do this in this sequence and you should be ok
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
doing this method will get everything back to normal and the phone will work just like it did right out of the box
It is #7 that is important when it reboots into recovery after froyo that does not brick then pull the battery and go back into download mode and flash the JFD, This will clear everything out and put you back into stock
Good luck

Got it started
I got it booted though a very hard process an now i cant get my sd card to mount it says when i go into anything media related it says "Your phone does not have a SD card inserted" an Externel dont mount either

Which sd card isnt working... internal sd, or external sd?

kf7strng said:
Which sd card isnt working... internal sd, or external sd?
Click to expand...
Click to collapse
Both of them aren't working

Jasonhunterx said:
Both of them aren't working
Click to expand...
Click to collapse
Don't use eugene's rom, since you were using an ICS rom follow these steps
flash froyo bootloaders
flash regular jfd and TICK REPARTITION ( ICS/CM7/CM9 change the partition layout and you need to flash correct partition table for stock rom to work )
back in bussiness.
http://forum.xda-developers.com/showthread.php?t=848737

jrafael said:
Don't use eugene's rom, since you were using an ICS rom follow these steps
flash froyo bootloaders
flash regular jfd and TICK REPARTITION ( ICS/CM7/CM9 change the partition layout and you need to flash correct partition table for stock rom to work )
back in bussiness.
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
it never booted on Eugene rom it just went to recovery an gave me an error the one time i got it booted was on 2.1 Stock all the phone does is go to vibrant screen then shut down an no boot loop just off it has done this before an i fixed but Sd was not working an first time apps worked but then 2nd time no apps worked besides browser messenger

Jasonhunterx said:
it never booted on Eugene rom it just went to recovery an gave me an error the one time i got it booted was on 2.1 Stock all the phone does is go to vibrant screen then shut down an no boot loop just off it has done this before an i fixed but Sd was not working an first time apps worked but then 2nd time no apps worked besides browser messenger
Click to expand...
Click to collapse
Hey Jason. I'm in the exact situation you're in. Loaded Passion for about 1 week, got the encryption screen and was forced to reset. Now my SD cards (internal and external) won't load. Have you found a work around for it yet? Cheers Mate.

nope nothing

either of you find a solution? Im having same issue

In the same boat
I am in the same boat. I was using the Euphoria ROM. Yesterday things slowed down on the phone. I rebooted a few times and it crashed. The last couple of times it told me about the encrypted data. That was when I tried to take it back to stock and it won't do anything now other than boot to the vibrant logo and shutdown. Searching for a way to odin a ROM/Kernel that has a CWM recovery so I can go in and manually format the SDcard.

Do what I did, sell it to someone as a wifi hotspot and buy yourself a hercules. You'll never look back
Sent from my SAMSUNG-SGH-T989 using XDA

BUMP
BUMP!
I have had a paper weight for three weeks now because of this partition issue.
there has to be a way to fix this.

webstas said:
BUMP!
I have had a paper weight for three weeks now because of this partition issue.
there has to be a way to fix this.
Click to expand...
Click to collapse
Try this one.
http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my Vibrant using Tapatalk 2

Webstas- Just out of curiousity, were you trying to mount your phone to your computer while on ICs when this happened? I have a theory that I believe I know why this is happening. Just need you to see if you remember a few weeks ago and if you had any problems mounting to your PC and then your next reboot you got the Ecnryption Error.

Woodrube said:
Webstas- Just out of curiousity, were you trying to mount your phone to your computer while on ICs when this happened? I have a theory that I believe I know why this is happening. Just need you to see if you remember a few weeks ago and if you had any problems mounting to your PC and then your next reboot you got the Ecnryption Error.
Click to expand...
Click to collapse
no i got up an took a shower then came back it gave me an encryption error then i odin back an more trouble odined a couple more times an now it boot loop an also wont start with eugenes froyo

I know it has been awhile but think back. Were you mounted to your PC at anytime between your last reboot and the Encryption Error? Doesn't have to be right before, the error gets throw on your "next" reboot. And as you know, reboots can happen manually or for something as simple as wrong UV settings.
Looking back in this thread, I saw that you got it to boot up. See if you can do that again and then mount your External via ADB and you should to push the proper commands then. Pretty much your internal is hosed, but me and a few others are working on that too.

Can't get it to boot it makes it to Vibrant screen an shut off an on Eugene"s froyo it gives me a couple of errors an I just can't get it to start anymore it there anyone who has encountered this an got it fixed like I really need this fix I am using a blackberry please save me

YAY
I got it fixed but now im on step 13 of that guide where you have to use ADB an i cant get the phone to show up on my PC what drivers do i need i already have Vibrant drivers but still nothing an the usb works its a samsung USB so can anyone help me with ADB

I am having a similar problem. Was running ICS 4.0.3 w/Euphoria without issue until this morning. Got a couple of errors after a normal recharge. Pulled battery and rebooted, but is stuck in boot loop. Cannot access either recovery or fastboot screen. Vibrant logo flashes and release buttons, but never enters mode. Then cycles to Android screen and would likely stay there until battery died. This is primary phone and need to put back into service quickly. Any assistance will be greatly appreciated. Thanks.
JIM in FLA

Go back to stock 2.1
Sent from my SGH-T959 using XDA

Phone won't boot :(

My galaxy 3 (apollo) came with 2.1, so I thought I would update to 2.2. I downloaded JPU from hotfile, the one that uses sampro.pl as password. Had odin set up with .ops, one package, nothing else checked. It flashes it and restarts a few times, then gets to the samsung logo which flashes, then it just freezes.
I have tried wiping the cache and factory reset. I tried JPS too (which I knew worked on my other phone - but that I upgraded from 2.2 to 2.2) but nothing seems to work.
Have I done something wrong?

I would suggest to flash your mobile once again
by following the instructions in the below link.
http://forum.xda-developewjrs.com/showthread.php?t=1372414
I hope it helps.

Somehow I got it working, I flashed Cyanogenmod and it worked, then wiped all including dalvik cache with cwm, still didn't work when I flashed froyo. So I removed sbl.bin and boot.bin from the .tar, tried and still nothing, then wiped data and cache one last time and on reboot it started up!
I had wiped the data and cache tens of times before and after flashing before, so it was either removing the bootloader or wiping the dalvik cache that made a difference. Only took all day to update my phone!

Try to get some different source for froyo....

I'm Glad you got it working again! next time you need stock firmware, use the one available in this forum by searching "stock jpu" the dev has removed the bootloaders and therefore it is much safer, and yeh as you've discovered, when it doubt, wipe the dalvik!

Hi
Yeah I did come across a thread where someone had removed the bootloaders, but all the files were either removed because they were on megaupload, or linked to JPI. I could have used that, infact I did connect it to kies at the start of the day and it said it could upgrade me to JPU. I wanted to do it by odin though! Then 12 hours later and trying countless other firmwares it worked. I just opened the .tar with 7zip and deleted boot.bin and sbl.bin, I had no idea if that would work or not!
It wasn't stuck in a boot loop so the bootloader couldn't have been corrupt? Perhaps it was the dalvik cache needed to be wiped from 2.1 to 2.2? I couldn't see anyway to wipe it with the stock samsung recovery.
Is CWM available for this phone? (without having to flash Cyanogen!)

mike_1983 said:
Hi
Yeah I did come across a thread where someone had removed the bootloaders, but all the files were either removed because they were on megaupload, or linked to JPI. I could have used that, infact I did connect it to kies at the start of the day and it said it could upgrade me to JPU. I wanted to do it by odin though! Then 12 hours later and trying countless other firmwares it worked. I just opened the .tar with 7zip and deleted boot.bin and sbl.bin, I had no idea if that would work or not!
It wasn't stuck in a boot loop so the bootloader couldn't have been corrupt? Perhaps it was the dalvik cache needed to be wiped from 2.1 to 2.2? I couldn't see anyway to wipe it with the stock samsung recovery.
Is CWM available for this phone? (without having to flash Cyanogen!)
Click to expand...
Click to collapse
CM7 is a aftermarket firmware, so it wont be available in the updates....and also, samsung wont give us this kind of good looking ROM anyways, flashing a ROM is a whole lot faster than updating through Kies or others...

J.Purungrit said:
CM7 is a aftermarket firmware, so it wont be available in the updates....and also, samsung wont give us this kind of good looking ROM anyways, flashing a ROM is a whole lot faster than updating through Kies or others...
Click to expand...
Click to collapse
Hi
I just meant is ClockworkMod available for the Galaxy 3. I noticed it was on my phone when I flashed Cyanogen Mod.
I have a Galaxy 5, the CM7 for that seems more complete, I noticed the camera doesn't work on the Galaxy 3 CM7. I thought they would both be about the same functionality.
In my case flashing a rom was slower as it gave me a bunch of problems, but yeah flashing is usually faster

mike_1983 said:
Hi
I just meant is ClockworkMod available for the Galaxy 3. I noticed it was on my phone when I flashed Cyanogen Mod.
I have a Galaxy 5, the CM7 for that seems more complete, I noticed the camera doesn't work on the Galaxy 3 CM7. I thought they would both be about the same functionality.
In my case flashing a rom was slower as it gave me a bunch of problems, but yeah flashing is usually faster
Click to expand...
Click to collapse
Camera has been mostly fixed in CM7 and Galaxy 5 has been out for longer so devs have had more time. Anyway, all custom ROM's come with CWM Recovery.

I think you can install cwm for stock Roms..I have seen similar question in some thread posted here..which says your phone should be initially rooted to do this..
I am not sure abt the process..but as far as I know..you have to follow these steps :
download an app called as z4root..search in Google..its not available in market..
root your phone..it will ask two options to either root permanently or temporarily..go permanently..(you can unroot it I think so don't worry)
and finally you can try several custom kernals.. head over to development thread for that.I prefer fugumod kernal..take the tar file and flash it via Odin (safer side wipe dalvik as well as cache and reboot)
since its a stock rom ..you will not be having dedicated option to go for recovery, use volume keys,power button and the center button together..
bit of headache..
try at your own risk..or if I am wrong, please advice

Smonic said:
Camera has been mostly fixed in CM7 and Galaxy 5 has been out for longer so devs have had more time. Anyway, all custom ROM's come with CWM Recovery.
Click to expand...
Click to collapse
Ah I didnt know the Galaxy 5 had been out longer. The camera didn't work when I used the latest CM7 for the Galaxy 3, when it took a picture it looked like a commodore loading screen But I didn't check gallery thinking about it, perhaps they came out alright

prabhuthelegend said:
I think you can install cwm for stock Roms..I have seen similar question in some thread posted here..which says your phone should be initially rooted to do this..
I am not sure abt the process..but as far as I know..you have to follow these steps :
download an app called as z4root..search in Google..its not available in market..
root your phone..it will ask two options to either root permanently or temporarily..go permanently..(you can unroot it I think so don't worry)
and finally you can try several custom kernals.. head over to development thread for that.I prefer fugumod kernal..take the tar file and flash it via Odin (safer side wipe dalvik as well as cache and reboot)
since its a stock rom ..you will not be having dedicated option to go for recovery, use volume keys,power button and the center button together..
bit of headache..
try at your own risk..or if I am wrong, please advice
Click to expand...
Click to collapse
I rooted the phone with SuperOneClick, I think it worked! Anyway I gave the phone to my brother now and hes just interested in a working phone, not messing about with roms! I may get the phone again when it comes down in price again (you can get them refurbished in brand new condition here in UK)
Thanks!

Galaxy Tab 2 10.1 Recovery Post Mortem

A story you might find some useful morsels in . If you are impatient, yes, a happy ending.
Monday night I opened the case on my tablet and it was booting. I figured that was strange and after a few minutes realized it was just stuck booting. So I rebooted it. Came up... and then suddenly during the everything loading up phase, rebooted. This repeated several more times.
Uh oh. Working quickly between boots I unset the default on Apex launcher (since it updates frequently) and turned off the live wallpaper. I also shut off Wifi. No effect.
Next stop recovery. Cleared caches, etc. Nope. I had a fairly recent backup but took another one and it worked (whew). Decided that I would do a data wipe from recovery. Uh oh. Any attempt to format /data causes a crash.
I go to Odin to see if I can repartition flash. I can't find a PIT file for the P5113 but did find one for a 16K 7 inch model. Odin repartitioned it but still no joy. Wiping data causes a reboot. So does trying to restore a backup to /data.
Next stop Kies. You can tell it to reload firmware but you need your serial number which is written on the back of your tab (yes it is, it is about the height of a carbon atom). However, it asks you to enter "recovery" mode by pressing buttons that aren't on the tablet. I tried Odin mode but it couldn't connect. Using CWM recovery didn't work either.
So I decided I needed stock recovery. I could not find a P5113 stock recovery that wasn't bundled with an entire update package. So I unpacked an update package to get recovery.img. Flash_image didn't work (seems like it never works on this tablet, and now that I think about it, I think I wrote a thread on how to do it with dd that I forgot about last night! Duh: http://forum.xda-developers.com/showpost.php?p=31293383&postcount=32). Instead, I repacked just recovery.img with tar. Odin was able to flash this and I was back in the ugly stock recovery.
I never did try Kies though because I asked the stock recovery to reformat /data and it worked! Back to Odin to reflash CWM and then the backup I made Monday night rolled back on and I was back in business.
Restore my screen saver, redefault (is that a word?) Apex, and turn Wifi back on. Oh yeah, and run Triangle Away
So I'm not sure what to make of all this. Open questions:
1) Did I need to repartition? What's the right PIT file to use? I sure wish Odin could dump a clean image, but if it can, I don't know how.
2) What mode does Kies want? This could have been a VirtualBox problem but I got it to work before I got Kies installed on my wife's real Windows box (man Kies is slow!).
3) Why could stock recovery reformat /data but CWM could not?
4) Would it have been sufficient to just reflash the stock recovery, do the data wipe? I suspect so, but don't know.
Anyway.... things are back to normal. Love the tab, but sure wish these big companies wouldn't assume we don't know how to fix our own stuff and muck things up with "simplified" tools. By the way, this is the "touch" CWM that seemed to fail to fix /data. I did not try the normal one.

wd5gnr said:
A story you might find some useful morsels in . If you are impatient, yes, a happy ending.
Monday night I opened the case on my tablet and it was booting. I figured that was strange and after a few minutes realized it was just stuck booting. So I rebooted it. Came up... and then suddenly during the everything loading up phase, rebooted. This repeated several more times.
Click to expand...
Click to collapse
Here we go again. Same problem but I'm not even getting into the boot. Does anyone know how to actually reformat and rescan flash for bad blocks? I have a feeling I have a bad flash block that is doing something evil.
Sigh.

Tried a different approach this time.
Booted to recovery and did an fsck on /data since it seemed to have the problem.
It did a lot of clean up and now I'm back up. Not sure what got damaged if anything though. Time will tell.

Good to hear that it is a happy ending, bro!
Sent from my AT1S0 using xda app-developers app