All right I was wondering if anyone could give me any inside info im having with my HD2, from T-Mobile ok.
Well I notice that sometimes the screen will go into idle and go off, but I will press any of the keys, like the end call or green call button or home or back and the backlight of those keys will come on but my screen will stay dead. The only fix I have found so far is just taking off back cover and removing battery and starting phone back up or by doing a soft reset but then eventually it will happen again. I searched for this but to no luck. Any help or suggestions?
Also will do it on a Stock ROM or a WM Custom ROM
Related
For some unknown reason after I press the power button to bring the phone back out of standby the screen is defaulting to the power save setting for the backlight (which means no backlight/dark screen) I have to goto the brightness setting under backlight and slide the bar back to the middle in order to light the screen. It never did this before and I did not change anything. It would just come back on tho the normal backlight setting (in the middle of the bar). If anyone knows why this would happen or if there is a setting in the reg I can do. Please help as I really do not want to do a hard reset and reload everything. I did do a soft reset, but it did not do anything.
Wish I could help. I have had that happen several times. Sometimes it clears itself up, last time I had to hard reset. I never did figure out what caused it...
Try searching, I know others have had the issue, too.
I just got a xv6800 titan. I noticed that the phone would go IDLE and not come back on while the Green light flashes on the top indicating its on. Even after pressing the power button to bring back the screen, its doesnt come back.
Only way to remedy the problem is by doing a battery pull. Is there anything im doing wrong??
k3lvin said:
I just got a xv6800 titan. I noticed that the phone would go IDLE and not come back on while the Green light flashes on the top indicating its on. Even after pressing the power button to bring back the screen, its doesnt come back.
Only way to remedy the problem is by doing a battery pull. Is there anything im doing wrong??
Click to expand...
Click to collapse
are you using the device lock/unlock today plugin? I thought there were some settings about allowing or not allowing the power button to work or maybe it was the other buttons. You might check there. Might be a registry setting that is off as well but it sure sounds like maybe a hardware issue.
The only lock im using is the s2u2 lock
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
pdiaz said:
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
Click to expand...
Click to collapse
Sounds like it's going all haywire. If you've had it less than a year, I'd send it in real quick. Sounds more like a hardware problem.
I don't think it is hardware as a hard reset fixes it...it just recurs down the track. I have done a hardrest and reinstalled all my apps and it is working great again but I was wondering if I should be checking somewhere in the registry for an aberrant setting. I am u using a backup image program so at least when it happen again I an restore my system more simply.
But then again, all the symptoms you mentioned point to a hardware defect. You could try to find a tweak, but like all electronic devices, it's the luck of the draw. Try emailing HTC and see what they say.
Hello all,
I have a problem with my HD2's touchscreen. I've had the phone for awhile now and never had any problems. I've been using android from Sd for awhie and recently switched to NAND android.
I go to bed with a working phone and when I wake up, the touchscreen doesn't work. After trying to use it all day, it occasionly works. When I receive a call or text, the screen works just fine. I am abe to use it until the screen turns off then no more. This happens for each call or text. It also works just fine at first boot(until the screen is turned off.
Thinking that this was a software problem, I tried flashing different android builds, with the EXACT same results. I then wondered if it was a problem with MAGLDER, so I flashed back to a STOCK TMOUS rom, and stock SP, radio etc.
Even after going back to COMPLETELY stock, it now does the same thing in WINMO. Works just find at first boot until screen goes off, and works when I get calls and texts.
I'm now thinking that this is a hardware/digitizer problem, it just seems weird to me that it works 100% until the screen goes off and then not at all.
Anybody have any idea's or insights?
Thanks!
i've read a few similar threads (please search for them!) that indicate one possible cause...
your buttons strips at the bottom may be messing with the touch screen connections. i remember reading in one thread that the dude found a strong relationship between use of the on/off/endcall button and touchscreen failures.
you say it works...:
1. ...until the screen powers off
2. also works when you get an sms or call
in case (1), you have to press the endcall button to "wake" the device...so maybe the button puts just enough pressure to screw up the screen.
in case (2), the device wakes up automatically, so you never pressed the button that might cause the screen to screw up.
try to narrow it down like i've described. maybe your buttons are causing the problem. good luck!
Thanks for replying!
I did see the thread you were talking about though it did not seem to match my problems. However, today as I was working and pulling my phone out, It has started to look like that is the case. As of this afternoon, as long as I press any of the buttons other then the power/end call button to turn on the screen, the tuchscreen works just fine. When waking up the screen with the power/end call button, it does not work at all.
Yesterday and this morning, it didn't matter what button I pushed to wake up the screen, it was totally unresponsive.
So it looks like using the power/end cal button presses on my digitizer and causes problems.
And it's back to not working at all when I use any of the buttons, lol. Guess it's time to start looking into a new digitizer.
so I just noticed the lights for my hardware buttons are stuck on, happens from the moment the phone turns on, and nothing changes it (though they seem to dim slightly) I've tried reflashing the phone (using mdj cyanogen 2.7, nand with magldr 1.12)
I tried searching and havent seen anything like this. Only thing I can think is maybe it got a little wet(?) while I was recording video during a snow storm here, but nothing else seemed wrong, just got home and noticed it. Any ideas?
I have the exact same problem. I've flashed back to the original windows mobile rom and the problem is still there! I've searched and yet to find the solution. Anyone got any ideas?
Check to see if you have a voicemail - you may have read it but closed VM before listening to all the message, it can on occasions do this - it I'm right just ring your phone leave a fresh VM then go into VM and listen to the whole message
Thanks for the reply, but no dice on this one. I tried the voicemail thing and I have no voicemails.
To clarify it's the bottom 5 buttons (call, home, windows, back and power) that are constantly lit up. Even when the phone goes on standby those buttons stay lit. I'm looking to see if there's an app that can just shut them off.
I got the same problem. My hd2 got some water on it and the problem started. The hardware keys now getting dim but not getting completely off. There is no other problem
Please help.
same problem on my father htc click
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
johnerz said:
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
Click to expand...
Click to collapse
Thanks, I will try the rom.
But do u really think its a rom problem ? The keys light were working fine before the water hazard in the same existing rom. Besides the problem is also there when u are in the boot menu of MAGLDR or Clockwork menu.
any updates from anyone? On miy HD2 the vol up, start, back & end call key don't respond to any presses but seem to be active. Calls will randomly end, vol up acts as if the button is kept pressed!
Help!
Hi guys,
A little bump in this thread, but is there already found a solution for this problem?
After a hard reset and replacing the digitizer of my htc HD2, the buttonlights remain on. Even when the phone gets in standby mode.
I'm using cyanogenmod 7. (bought it like this. Didn't put android on it myself)
After the hard reset and digitizer replacement there also came another problem.
When pushing the windows logo (key 158) the volume up button also reacts (key 115). Thesame problem occurs when pushing the dial button. With that key (231), key 114 (volume down) reacts.
So when i want to open a menu or make a call the volume goes up or down.
Do you guys think I screwed something up when replacing my digitizer or is it just an software issue caused by the hard reset?
All right guys, it was an hardware failure.
I reopened my htc and checked all the connectors and (re)placed some of the yellow tape. After the reassembly, my phone just works as it should. All problems are solved.
My HTC HD2 also got the keys stuck after only a week of use. T-Mobile is sending me a replacement phone today.
Is this a common problem? I'm afraid it may happen again.
Hey guys I'm having same issue. Going to try opening up and check connectors.