[Q] Android on the HTC HD2 (HELP!!) - HD2 Android Q&A, Help & Troubleshooting and Genera

Hi,
I hope someone can help im trying to load Android on to my HD2 and ive not had much success so far.
Ive got through forums after forums and im now at a dead end!!
I have a typical HD2 - on the Virgin Network now ive been looking through youtube vids and forums and all there mobiles have been T-Mobile models (i dont no if this makes a difference) althought i no some one with a Virgin Mobile one and theyve done it they gave me a link to use that they used but its not longer active.
Ive tried serveral different Android Roms but nothing works i start the intall proces and i either end with this -
HaRET boot
Sutting down hardware
Turning off NMV...
In preloader
PSR=600000df
Tags reloadedto 0x11b00100 (size 0x00000f00)
Kernel rel0cated to 0x11B0B000 (SIZE 0X0026F2EE)
Initrd rel0cated to 0x12200000 (size 0x001cfde1)
Jumping to Kernel (custom) ...
AND FREEZES
or i get this -
The boot loader starts and seems to be loading and intalling and then for no reason just stops mid flow and fades out.
it this untill i take the battery out and put it back in again and it loads windows 6.5 fine.
this is doing my nut in and i would like to get rid of Windows 6.5 and have android put on to here it so much better!
I hope you can help thank you inadvance!
Cool Breeze

Firstly this section is for development not Q&A.
Second, What you are doing isnt going to replace your winmo 6.5, it will still be there. The process you are trying to do is simply to make your phone reboot into android kernel and boot from sd card from and android "build" NOT a "rom", You are not installing anything.
If you want to replace winmo you need to install MAGLDR and then flash one of the NAND roms to your phone.
I noticed you didnt mention anywhere about your spl or radio versions which makes me think you haven't even bothered to go and read any guides before creating this topic in wrong place.
Go and do some reading of the guides which you will find in the stickies or by searching forum.

Cool
Thank you i think! new to the website trying to find a little help and all i get is attitude wicked!!!
Sorry i posted in the wrong place but rather than giving me attitude you could point me in the direct of a threat that would help me!!

Cool-Breeze said:
Cool
Thank you i think! new to the website trying to find a little help and all i get is attitude wicked!!!
Sorry i posted in the wrong place but rather than giving me attitude you could point me in the direct of a threat that would help me!!
Click to expand...
Click to collapse
You haven't even bothered to do the most logical thing in a forum, which is to read the stickies where 9/10 the info you need is located.
So please give me a reason why I should wipe your arse?
I dont mind helping people alsong as they also try and help themselves, but people who come here and go directly into posting a topic is just pure lazyness. If you want help and support at least have the manners to attempt to read a little first.

Related

Newbie puzzled!

Hi guys!
I'm not easily puzzled by terms and stuff to do to tweak your hardware, but since I'm all new to WM, I am trying to make sense of how to go ahead with running a custom ROM. I have a TC with original UK ROM.
First, obviously I should make a dump of my currently installed ROM. I am just very unsure how I achieve that?
Second, I have figured out that I need to Hard-SPL to get rid of certificate-checking in de device to run ROMs.
Third, I need to flash a custom ROM ... at this point I can have my way with the device, and do what I want. Also, not clear how I do that, unfortunately
Offcourse, at some point I will want to return my device for maintenance, warranty or maybe even sell it ... at which point I need to un-do the HardSPL hack, and reflash with the original image ... How would I go about that?
I've searched the forum, and I couldn't find it unfortunately, maybe, since I am a newbie, I missed a term to search for, or maybe I completely misunderstood
Any hints are very welcome!
Mescaline said:
Hi guys!
I'm not easily puzzled by terms and stuff to do to tweak your hardware, but since I'm all new to WM, I am trying to make sense of how to go ahead with running a custom ROM. I have a TC with original UK ROM.
First, obviously I should make a dump of my currently installed ROM. I am just very unsure how I achieve that?
Second, I have figured out that I need to Hard-SPL to get rid of certificate-checking in de device to run ROMs.
Third, I need to flash a custom ROM ... at this point I can have my way with the device, and do what I want. Also, not clear how I do that, unfortunately
Offcourse, at some point I will want to return my device for maintenance, warranty or maybe even sell it ... at which point I need to un-do the HardSPL hack, and reflash with the original image ... How would I go about that?
I've searched the forum, and I couldn't find it unfortunately, maybe, since I am a newbie, I missed a term to search for, or maybe I completely misunderstood
Any hints are very welcome!
Click to expand...
Click to collapse
All of your questions had been answered a number of times already in this forum so there's only one thing you can do, Search and you will find the answers.
Hi. I'm actually searching for the same stuff and haven't found some all-in-one topic yet.
Don't mind "kutonglupa", i'm beginning to think he's a bot on this forum. Even though you say (i did it too) that you used the search function he can only come with one response: "use the search".
I'll keep searching too.
Try this for starters: http://forum.xda-developers.com/showthread.php?t=356895
You probably know this already
Hard-spl flash:
Download hard-spl
Plug the usb cable to your pda.
Run RomUpdateUtiliy on PC.
PDA will display tricolour.
You will be asked REPLUG you usb cable. DO IT!
After a few second Hard-spl will be upgraded!
Rom flash:
Download the rom
Step manually to bootloader (press and hold camera button and press reset)
You will get a tricolor screen.
Plug the usb cable to your pda
Start RomUpdateUtiliy.exe (or Rom.exe) on you Pc.
Pda screen will be grey, you will see the process indicator.
When it is 100%, update is finished.
Radio-rom flash
The same as rom flash above, just download and use the radio-rom.
Back to offical rom + radio:
The same as rom flash above, just download and use the offical rom!
Back to original spl:
At this time no working method as I know...
katbollie said:
Hi. I'm actually searching for the same stuff and haven't found some all-in-one topic yet.
Mind "kutonglupa", i'm beginning to think he's an Angel on this forum. Even though you say (i did it too) that you used the search function he can only come with one response: "use the search".
I'll keep searching too.
Click to expand...
Click to collapse
That's right dude. Keep searching!!!!!!!!!
Mmm, sweet, i've immediatly put it in my sig......in case i can ever help another newby.
(who owning a Polaris would ever think of searching in Kaiser )
katbollie said:
Mmm, sweet, i've immediatly put it in my sig......in case i can ever help another newby.
(who owning a Polaris would ever think of searching in Kaiser )
Click to expand...
Click to collapse
See! Now you know you'll find a more comprehensive explanation if you'll just search, init? You've learned the lesson and you've earned your respect. CONGRATS DUDE!
Thanks
Newbie thanks for opening this thread,
it give a very good overview what to really do for flashing the Rom without having to read through XX Pages.
Unfortunately I have still have not found a right link on how to backup my orginal O² German ROM.
What do I need for this just in case I do need to send in the Polaris?
Is the software specifc for the Polaris?
Look forward for a quick note.
Cheers
Rar9
Be careful with what you try from the Kaiser forum in terms of tweaks though, I've read people had problems using them on the Polaris. see the Polaris tips and tricks thread for details
nahguam said:
Your posts in this thread are a good way to get a name for yourself as obnoxious.
Click to expand...
Click to collapse
Thanks dude. You're welcome!
I was reading now in the whole forum for about two whole afternoons, and I have to say that I still have the same questions as the threadstarter.
These questions answered once and for all, this thread would be worth pinning in my opinion, because complete newbies don't know where to find the necessary information in this really huge forum.
For the case someone wants to come up again with "use search", I will try to make clear, what problems of newbies (including me) are:
For example: I now already found three different lists of HTC-cab-files in the forum, one here in the polaris-section, one in the general section, a half one in the wiki... often without version-info, and so don't really know whats the actual one...
so far so confusing, I tried to search for the answers onto the exact same questions as the threadstarter posted. in the wiki, there is simply nothing on WM6, no tools, no real how-to, nothing a newbie can use.
Only thing I could understand from wiki, is that cooking an own ROM, needs to have a unix(-like) OS, and even there, I'm not sure if it is still actual for WM6.
Reading a bit around, I then was glad to at least find out that the devices are locked for non-certified ROMs, and that one needs to do that HardSPL.
Well that's as far as I could get until now, and I really don't know much more than before. Pretty unsatisfactory...
So could anyone make (or point to) a little overview of what one needs to know about dumping, flashing WM6-ROMs, and before flashing, what one needs to "cook" an own ROM.
Perhaps I was imagining this way to easy, but I thought about nLite/vLite-style applications for customizing ROMs?! Probably you'll all laugh at me, but I would very much appreciate taking me serious, because I want to learn how to do it. Simply don't want to lose time searching the forum for information, that don't help me advance...
thanks a lot
Eric
EDIT:
well I found this, which I can only recommend to all newbies: http://forum.xda-developers.com/showthread.php?t=356895
with this, questions of flashing are all answered,
but what tools one needs for dumping, flashing, editing ROMs and all of the remaining questions mentioned above remain open

[Request Help] Just got my HD2... New to this forum:(

I hope this is the right section. If i just posted on the wrong section, i hope moderators can move this thread instead of closing it. Thanks
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi, i believe some of you remember that i am switching from X1 to HD2... Well, i have changed it and i'm using it now (love the big screen)
I was wandering around this forum... I saw a post: http://forum.xda-developers.com/showthread.php?t=578575&highlight=dualboot
What does it actually means by: "ANDROID/MAEMO/LINUX on HD2"
Is it that when i flashed it, my Windows OS platform is gone for good???
Then... ... I searched deeper. LOL, and notice this post: http://forum.xda-developers.com/showthread.php?t=623792
I am very very attracted to the DualBoot... Thats actually i wanted for my HD2.
Well, thats not my main question/request...
A troublesome request will be appearing after this sentence, i hope that you guys wouldn't feel fed-up. *(Apologize to you first)*
The most important question... Is it compatible for HD2??? If its not, sorry for this post.
If it is compatible, could someone spare me their time to guide me along the step and procedures to install the android OS and then the DualBoot.
If possible, mind attaching/link the required file for this whole process.
A million thanks to you guys. Sorry if i speak a bit to harsh
P.s. Sorry if there is a guide already up there in the forum . I'm a student and need to study for my test, didn't have time to search so many pages
I don't mind if you copy/paste the guide here... Just attach the required files needed.
Thanks once again
...Sorry if i speak a bit to harsh
I would like to advice you to read more of the ANDROID/MAEMO/LINUX on HD2 thread. You'll see that it still is in full development. For android to work developers need to create a custom kernel that will run on the HD2 using Haret. There is no question of a nand flash of android as of yet.
Now even with the use of Gen.Y dualboot, if you are not able to boot into android, the application in itself is still useless (on HD2). Furthermore, the dual boot application does in fact start your windows mobile Rom but directly start Haret instead of completely loading windows mobile (correct me if i'm wrong please).
So to sum up. Don't worry about flashing over windows mobile. This isn't possible (yet). Running android is not working (yet). And even with the use of Gen.Y dualboot, you'd still run windows mobile as a flashed rom and not Android itself.
I do have to ask though. If you just got the phone and already want Android.. why didn't you get an android phone? Ofcourse if you are like me and just like to tinker with your phone I can understand .

[Q] Deaf dude need help!

I need some help. I wasn't sure what do I need to install the android on hd2? I know Froyo 2.2 is the latest update for Android. But do I need to put some special rom in it or what? HSPL? SPL? I don't even know what are these. Can anyone just make a short simple instruction how to install android on hd2?
instant gratification is why everything sucks. work for your knowledge read a little bit and you'll see that other people have put hundreds of articles just for us. search and you'll find them even quicker. i can't tell you how many times they're posted and re posted everywhere.
if you're going to be on a forum at least learn how to use it this is just a waste.
Try Your luck there:
http://forum.xda-developers.com/showthread.php?t=732380
But be sure You have the knowledge and ability to setup Your HD2 newly if You crash it. It took me an entire night stuck with the Radio-flash which corrupted my HD2 and I had to go back to stock-ROM without Froyo running.

[Q] [Newbie] Need full guide from start to install WP7

I just got my HTC HD2 today after selling my iPhone 4. I need a full guide from start to end on how to install window phone 7 precisely please as I don't want to brick my new phone !
Anyone nicely to help this newb?
(Reason why I sold my iPhone 4 is that I had iPhone, iPhone 3GS and iPhone 4. And it does get boring after awhile and I heard about the awesome HD2 running shiz loads of OS )
MrPhilo said:
I just got my HTC HD2 today after selling my iPhone 4. I need a full guide from start to end on how to install window phone 7 precisely please as I don't want to brick my new phone !
Anyone nicely to help this newb?
(Reason why I sold my iPhone 4 is that I had iPhone, iPhone 3GS and iPhone 4. And it does get boring after awhile and I heard about the awesome HD2 running shiz loads of OS )
Click to expand...
Click to collapse
Dude, your asking for trouble on this one, see when you started this thread did you notice the the list of similar threads that comes up?
Its been asked time and time again and some folk on here can get very very vocal when people keep asking the same questions without looking at the quite obvious theads and stickies detailing what you need to do
Another question, have you searched at all? ok i see the search function is still down so will let you off that one, but there are various stickies at the top of the Q&A section for WP7 that will help
Im not going to detail everything you need to do, but i will give you a basic list, you can find everything you need either on the stickies on the various HD2 forums, or in the Wiki, remember most of what you need to do before you even think of installing WP7 is on the standard HD2 forums.
Anyhow, here goes, (note whilst you cant search on xda developers you can (and i always use this because its much better) seach via google, use strings like "XDA DEV LEO install HSPL")
first things first you need to unlock the device, so you will need to find and follow the directions for installing HSPL
you will then need to install the correct Radio, if you have the TMOUS 1024MB HD2 you must be very careful as flashing incorrect Radio will give you a brick, most HD2s are not this version unless you live in the states. search the HD2 WP7 stickies to find out which radio
then you will need to install the MAGLDR 1.13, use google if the XDA search is nackard, search for strings like "XDA DEV LEO MAGLDR install how to"
once thats taken care off your ready for WP7, boot to MAGLDR and get it ready for a USB flash and away you go.
Im not doing this to be rude, because i could have just as easily wrote down eveything you need to do, im doing this to help you, if you read the threads you will "learn" whats going on, you will see some of the issues other people have had and you will see how they fixed them, me telling you what to do wont teach you anything and you will be back on here starting new threads about something equally well documented.
http://forum.xda-developers.com/showthread.php?t=923997
note, its very unlikely you will brick your device, unless you have a 1024MB version and flash the wrong radio, more often that not, when people report bricked devices they simply have to go to boot loader mode and flash a new ROM, a stock ROM would put you right back to a factory default, radio and all. so dont panic about that, there is also the SD card flash if you cant do it via USB for any reason, but in all my years ive never had to do that.
oh an use a class 2 or 4 SD card, might not work but its a better chance than others.
Hey sorry about that, I tried searching as mention by you which didn't work. I thought the stickies threads was just rules, didn't know it includes links.
Also where can I find these radios on xda instead of some other website?
Also what's the difference between 512MB and 1024MB? Well of course it's double memory.
My phone is from UK, so i guess it's a European model?
I know I could search for these information but I thought this might show up on google search for other newbies. Thank you for helping me
1024=Tmous=USA
512=Rest of the world so you have a 512 (rom , not ram)
You can find all radios in the wm6.5 dev section (HD2 is a wm6.5 phone after all ^^ )
two words mate,
read up.
MrPhilo said:
Hey sorry about that, I tried searching as mention by you which didn't work. I thought the stickies threads was just rules, didn't know it includes links.
Also where can I find these radios on xda instead of some other website?
Also what's the difference between 512MB and 1024MB? Well of course it's double memory.
My phone is from UK, so i guess it's a European model?
I know I could search for these information but I thought this might show up on google search for other newbies. Thank you for helping me
Click to expand...
Click to collapse
good luck!
Look, if you have questions then ask but make them specific, like the two you just gave and the radios arent on a very obvious location as ^ has mentioned, if its a UK phone you have nothing to worry about, WP7 cant use the extra 512MB of ROM anyway
remember though, google is your friend!
try search for "XDA DEV LEO radios" on google without quotes
the one you want will be the first thread or if not it will be within the top 5 XDA DEV results
same for HSPL and MAGLDR
if you get stuck youve had a look about an cant find what you are looking for then drop a question, an just say, look ive tried this this and this but im buggered if i can work it out, can you guys help
and perhaps once your done you could give complete step by step guide including all links and downloads, because your right, its not all in one place but it is all there.
One thing you MUST NOT DO is use a USA Raido to update your 512 HD2 cause you will brick your phone and it's gone till you find someone who can jtag your
phone and fix it which will cause you alot of money. Make sure you read up before
trying anything.
WP7 is quite tempting, I agree.
Though, I must admit, I'd be a little wary about installing it, as it seems like it's still quite new.
If you want to give it a shot though, I recommend picking a build out of those listed here, and reading through all the instructions and comments before deciding to install it.
Also, before you try anything, be ABSOLUTELY SURE your stuff is backed up. I can't say how many times I've lost things on my phone because I've accidentally updated a ROM without say, backing up my contacts.
I now use Google Sync to keep all my Windows Mobile and Android contacts backed up, so this doesn't happen.
I'd recommend setting up a google account, and following these instructions to backup your contacts with your google account prior to trying anything.
Anywho, bestest of luck!
CrAzYiaN said:
One thing you MUST NOT DO is use a USA Raido to update your 512 HD2 cause you will brick your phone and it's gone till you find someone who can jtag your
phone and fix it which will cause you alot of money. Make sure you read up before
trying anything.
Click to expand...
Click to collapse
europe can flash 2.xx.50.xx and 2.xx.51.xx on 512mb UK version
ok, since this is the only thing that can give you a really bad day
download this radio here
http://www.multiupload.com/QP0IWGY42F
you will find everything you need about radios on this thread here
http://forum.xda-developers.com/showthread.php?t=611787
The directions are on that link above but basically you will also need to get two other things
Custom RUU, found here
http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1
that is the flashing program its self, when you download a radio it wont have an installer, it will be just a single file, you will need it to flash any WM6.5 ROM or radio but usually the ROMs will have one included.
HSPL, found here
http://forum.xda-developers.com/showthread.php?p=5279234#post5279234
this is the really important bit, this "unlocks" the device and gives you a layer of protection should you screw it up, which is most unlikely anyway download the attached file in post number 4, its the most recent and covers pretty much anything
righty once you have all that on your PC in a nice easy to find location its time to start modding it!
HSPL first, download the program and follow the instructions on the HSPL thread, which is more or less, run the program with your phone connected and charged up, IF it cant do it then it will tell you. For WP7 you MUST install HSPL2.08 when prompted.
once done, you will not notice any difference.
now follow the directions for installing the radio you downloaded use the CustomRUU, firstly extract the file then rename the extracted file to "RUU_Signed.nbh" and flash with the CustomRUU by just placing them both in the same folder (no other files in there) and running the customRUU
THAT is the hard part done, next is MAGLDR, let us know how you get on with that
MrPhilo said:
I just got my HTC HD2 today after selling my iPhone 4. I need a full guide from start to end on how to install window phone 7 precisely please as I don't want to brick my new phone !
Anyone nicely to help this newb?
(Reason why I sold my iPhone 4 is that I had iPhone, iPhone 3GS and iPhone 4. And it does get boring after awhile and I heard about the awesome HD2 running shiz loads of OS )
Click to expand...
Click to collapse
Mr Philo have you got your activation code for WP7? Just dont waste your time flashing WP7 until you get a code from Microsoft.
And yes the search engine on here is not very good, but as the others said use Google.
Also when I started using XDA, i spent loads of time reading through most of the threads. And yes I read a lot before I even started to think about flashing.
But we were all Noobs, and we will help you out when you get stuck?
Also go to this thread for all info :http://forum.xda-developers.com/showthread.php?t=971478
Hey guys thanks for all the information! I just downloaded all the files that are needed and named them step by step in a folder.
First I can't check what SPL version I have. I did hold down the lower volume button down, but it only brings me to the 'vibrate, silent etc adjustment' (Yes i was holding it for 20 seconds). And it says do a reset, while holding down?? How can I do that. Sorry I know im failing already !
EDIT: Flower thankyou for the thread, but I was using it as well ! But its just the SPL bit im confused at :\
Oh yeah, I have already got a code yesterday from the UK Microsoft, was very easy
Start in bootloader mode. Shut down the phone / push and keep the vol down button and press the power button once...and wait 5s
Edit: Just saw its already answered above
Sakem said:
Start in bootloader mode. Shut down the phone / push and keep the vol down button and press the power button once...and wait 5s
Click to expand...
Click to collapse
Thanks, my SPL is 3.03.000!! So I need to flash a ROM or something to get SPL 1.42.0000?
I currently don't have a SD card with me right now as I left it at home and will be going home next week. So is there anyway I can flash a ROM without using a sd card?
You need to flash an old rom to get an old spl, then flash HSPL 2.08.
No need for a sd for this, juste start your phone in BL mode and execute the ruu from your pc
Which ROM should I download from the HTC website? I mean theres a few ROMs for HTC HD2.
Theres ROM Upgrade for HTC HD2 - 2010-10-11
ROM Upgrade for HTC HD2 - 2010-01-25
etc?
Sorry for all the questions !
I used this ROM http://forum.xda-developers.com/showthread.php?t=944995 (the Standard Version) as it already have the phone unlocked etc and have no problems with it...and had no problems activating it as well. However a lot of the other ROM's now also have your phone already unlocked etc...and most ROM's at the moment should be pretty similar as it uses the same base files.
Edit:
However...on this ROM...one of the first XAP files you should load is the Connection Setup.xap
omarza said:
I used this ROM http://forum.xda-developers.com/showthread.php?t=944995 (the Standard Version) as it already have the phone unlocked etc and have no problems with it...and had no problems activating it as well. However a lot of the other ROM's now also have your phone already unlocked etc...and most ROM's at the moment should be pretty similar as it uses the same base files.
Click to expand...
Click to collapse
Sorry I mean't from HTC website to get the SPL 1.4... , I don't know which one to download on the HTC website!
Have a look here http://forum.xda-developers.com/showthread.php?t=898128 and at the bottom you will see a post explaining a bit more with this link to ROM's http://forum.xda-developers.com/showthread.php?t=623283
Let me know if that's what you are after?
yes that totally solved all my issue! thank you very much

[Q] I'm just tooo noob for all this...just guide me around

I just purchased an unlocked TMobile HTC Leo, which I'm gonna use with att. I've heard all the capabilities this phone still delivers and being honest, I'm really excited about upgrading it to an Android OS from day one. On the same note, I have to say that I'm overwhelmed by the variations of ROMs, ways to install them,etc, etc, etc...I'm not a techie by any means, the only related experience I have is changing the OS on my BB bold2. believe when I say I had being checking threats after threats for hours in order to not deal with a dumb troll, but all I could find was old guides (a year old or so). so if somebody can pitch me a couple of useful noobie tips, send me some links of updated guides, any warnings or has a useful comment, be my guest.
This is all you need, i think....
http://forum.xda-developers.com/showthread.php?t=1136644
And you have to read those two very short and small warnings before you start :
http://forum.xda-developers.com/showpost.php?p=16255579&postcount=2
and this ..
http://forum.xda-developers.com/showpost.php?p=16256932&postcount=3
i agree that whats listed above should be rather helpful but you should also read this thread found here. its Flashing Your First HD2 NAND Android Rom [For Newbs] & will guide you through the steps in order to get Android onto your device. this thread was written with the noob in mind so everything is written rather simple in a straight forward manner. the steps listed on that page will have you lose winmo and it will be replaced by Android. if you want a sd build then i would suggest one that has Android already built in like this one so you can get a feel for it before deciding whether or not to go to a nand build.
please before you flash any rom/radio/kernal/...people you have an idea of what your doing or atleast know what not to flash. if you have a 1024 leo flash 1024 leo roms if you have a 512 leo flash 512 leo roms​
Sorry, unrelated but I couldn't help pointing out this:
Fstar said:
I say I had being checking threats after threats for hours in order
Click to expand...
Click to collapse
'Threats after threats'...
welcome. good reads above.
just wanted to let you know, too, that with the tmousa on att, you will NOT get 3g. just edge. that is a hardware issue. if you want 3g, you will need the telstra version of the hd2. but i reckon you know this, but thought i'd share just in case.
enjoy.
why not try some of the SD builds first? at least you don't risk bricking your device, and can enjoy android until you feel ready to flash NAND
thank you guys for the quick responses and inputs. its cool to know that you belong to a dedicate comunity such as xda; I'll check out my options and let you know my progress. thnx again
lol, threads AND threats as well!! there's some short temper ppl around...

Categories

Resources