This is probably a stupid question and i am not going to hear the end of it so here it goes, How can i find out what my original FW that came with my tab was? I have flashed a few ROMs to try and get Voice on my T-Mobile tab and i am currently running Roto's JME v4. Of course i never did a back up of my original FW since it was in the early stages and there was no way to do it until Roto came up with his Rotobackup. The reason is that i wanted to have it just in case even though that might be too late now. I do have a Stock T-mobile.zip to be flashed with Odin that Roto was able to put together but of course that does not work for me since i have a locked bootloader.
In short is there any way for me to find my original FW? or wait to see if Rotohammer can unlock the bootloader or am i basically SOL and just pray and hope my tab does not crash on me and just stick to one good known ROM (currently Roto's JME v4)
I think there's a thread on a bounty for anyone who unlocks a bootloader. So flashing with Odin or Heimdall won't work in that situation?
http://forum.xda-developers.com/showthread.php?t=855851
halftonehero said:
I think there's a thread on a bounty for anyone who unlocks a bootloader. So flashing with Odin or Heimdall won't work in that situation?
Click to expand...
Click to collapse
no every time i try to install the stock T-Mobile fw that Roto set up i get a Fail message in Odin.
b0ricuaguerrero said:
http://forum.xda-developers.com/showthread.php?t=855851
Click to expand...
Click to collapse
That's where i got the file from, but i can not flash it, supposedly i have a locked bootloader, so right now im SOL until someone can work around that, i can flash other FW from Roto. Another thing i can't flash is CF-Root same issue i get a fail message it goes back to me having a locked bootloader.
adinis78 said:
In short is there any way for me to find my original FW? or wait to see if Rotohammer can unlock the bootloader or am i basically SOL and just pray and hope my tab does not crash on me and just stick to one good known ROM (currently Roto's JME v4)
Click to expand...
Click to collapse
Just chill man! The signed bootloader fix works for me and several other folks, it will be released early next week.
There is absolutely nothing you can do at this time. Starting new threads wont help either.
rotohammer said:
Just chill man! The signed bootloader fix works for me and several other folks, it will be released early next week.
There is absolutely nothing you can do at this time. Starting new threads wont help either.
Click to expand...
Click to collapse
As always thank you, i was just reading something about that but it keeps re-directing people to different threads and its a bit confusing. I guess im just a bit impatient, cant wait for the release and finally be able to go back to stock if i ever need it and then change back to a different room.
Please advise which thread to look for the release once it comes out.
Sent from my GT-P1000 using XDA App
Related
Hello,
Sorry if this has been answered, but I couldnt find anything when I searched.
I am trying to go back to stock on my Vibrant just like when I first got it out the box.
I flashed the unofficial update JI2 and then the JI6 through Odin, but now I want to go back to stock to see if I get the update from Tmobile or just do it through Kies.
In order for me to do this I have to go to stock and I cant find or know to to do it. I seem to be getting this whole Odin thing so if I can do it this way it would be great. Please let me know. Thanks.
I search Development section, but none of those worked for me. Not sure if Im doing something wrong.
I am no expert by any mean just a noobie but I downloaded the files on the link posted in I believe it was the Development section that was the JDF Odin stock rom etc. Look for it posted in there or search it and it will come up. I used Odin and it went smoothly and then I updated to ji6.I believe the link below is what you are looking for.
http://forum.xda-developers.com/showthread.php?t=734475
Here is the link again for some reason it shows up when I save it but when I exit out and come back it is gone
http://forum.xda-developers.com/showthread.php?t=734475
Ok, so I did find this one, but I had no luck!
So did you click on the last one that says All 3 Files?
Or did you click them one by one?
you should try a custom rom before going back to stock!
htc2364 said:
Ok, so I did find this one, but I had no luck!
So did you click on the last one that says All 3 Files?
Or did you click them one by one?
Click to expand...
Click to collapse
Either way you want to do it. The 3 files-in-one is a smaller download if that matters to you. But they're all the same...
Also, in the Vibrant Bible, there's a link to Odin1.3 which worked well when I had to go from JI5 (via Kies) back to JFD for the Kies Mini update to JI6. Just fyi, I'm running Win7 Pro 64-bit, not sure what your setup is like.
When you say you had no luck, did you mean you couldn't get into download mode or Odin didn't work for you? For Odin to work you have to make sure the ID:COM in the upper left is populated with a number. Otherwise Odin is essentially saying that it doesn't see your phone, most likely due to driver issues.
Thanks for the help! I finally got it to work!
Sent from my SGH-T959 using XDA App
htc2364 said:
Thanks for the help! I finally got it to work!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Why would you want the OTA if you already flashed it? Now you may run the risk of soft bricking after accepting the update... Maybe it's just past me at this early hour, but can't figure out why you wanna do this.
posting to save this thread to refer back to later
The reason I wanted to try Kies OTA is because of the missing Market apps and also because I was having lag problems with the flashed version.
Actually everything went smooth after I figured out how to do it.
Unfortunately there are still missing apps, But my phone runs alot smoother.
Sent from my SGH-T959 using XDA App
Just a wont turn on I used odin 3.1
s1_odin_20100512 pit
and T959UVJE8 PDA , Phone files and selected repartetion and started , it had 2.2 on it and was not working fine.
was installed and the restarted and there you go not working
alnasher76 said:
Just a wont turn on I used odin 3.1
s1_odin_20100512 pit
and T959UVJE8 PDA , Phone files and selected repartetion and started , it had 2.2 on it and was not working fine.
was installed and the restarted and there you go not working
Click to expand...
Click to collapse
Email me [email protected]
Sent from my GT-I9000 using XDA App
Um...
I'm going to assume you can not get into download mode or recovery mode?
yes I cant get to download mode or recovery
Same problem. My vibrant does not boot Tried the battery method, removing battery, holding volume buttons while putting it back in. Does not work Any other ideas I could try ?
DEAD Vibrant after OTA
Yesterday I borked my Vibrant. Spent alllll night using Odin to get it back to factory and then allowed the Tmobile ota update figuring that it worked fine before. Well it went to reboot and never came back. BLACK screen. Left it plugged in while I ate breakfast with tears dripping in my pancakes (I went to bed at 6am!) and I noticed the top of the phone was very hot. Not the battery the top.
Sometimes I hate technology but technology always hates me!
Would it be worth building a DIY plug?
Sam Fisher
First of all, what the HECK were you trying to flash onto your device? The only thing you should be using ODIN for is JFD or JI6. Those are the only official T-Mobile firmware you should be flashing to restore from a brick besides Eugene's Froyo, but that's for like emergencies.
Second of all, If you have the Bell Vibrant, this is the wrong forum.
Finally, there is no ODIN 3.1. You must be using Odin3 1.0 which is VERY unstable. Please do more research before you attempt to do things to your phone.
Address these concerns and we can proceed.
Kangxi
Be more helpful before you post here in our forum and do more research.
If Odin3 v1.0 is unstable you should offer the ignorant massess here the correct version to use including a link to it.
Sam Fisher
dentman said:
Kangxi
Be more helpful before you post here in our forum and do more research.
If Odin3 v1.0 is unstable you should offer the ignorant massess here the correct version to use including a link to it.
Sam Fisher
Click to expand...
Click to collapse
Listen here little guy, I was talking to him not you. I asked him three questions to verify what he did because if he doesn't even have the right model phone then this is the INCORRECT forum. The firmware he was trying to flash is incorrect and not stock. T959UVJE8 looks to be firmware for the Vibrant but stock firmware is T959UVJFD and the OTA update is T959UVJI6.
Posting in "our" forum Mr. 3 posts? You are telling me to do more research? That's funny.
Everything I mentioned can be found by simply going to the development section and looking in the Bible. I already mentioned that you need JFD and JI6. The latest version of ODIN is 1.7. All of this can be found in less than 2 minutes.
Bible:
http://forum.xda-developers.com/showthread.php?t=771111
Honestly, you need to start by looking through there. It seems you both have a lot to learn and spoon feeding you isn't going to solve the bigger problem. Hope you get it resolved. Look through there, find the files you need (you need to get use to looking in the Bible) and come back. If you still have problems after READING, I will walk you through it. Good day.
kangxi said:
First of all, what the HECK were you trying to flash onto your device? The only thing you should be using ODIN for is JFD or JI6. Those are the only official T-Mobile firmware you should be flashing to restore from a brick besides Eugene's Froyo, but that's for like emergencies.
Second of all, If you have the Bell Vibrant, this is the wrong forum.
Finally, there is no ODIN 3.1. You must be using Odin3 1.0 which is VERY unstable. Please do more research before you attempt to do things to your phone.
Address these concerns and we can proceed.
Click to expand...
Click to collapse
TMobile Vibrant. It does not even start. So, Odin is not even in the picture. I was flashing the 3 button fix for vibrant using update.zip method. It flashed successfully, but after flashing, it never came back on.
I managed to get my Vibrant into DL mode the other day when it was just a black screen by...
-take out battery, sim, and sd card
-plug phone into wall charger (not computer)
-hold volume buttons while popping the battery back in
it took me a couple times, but i guess the wall charger gets a better jolt?
fyi: my vibrant is not hardware locked
hope this works for you
dentman said:
Kangxi
Be more helpful before you post here in our forum and do more research.
If Odin3 v1.0 is unstable you should offer the ignorant massess here the correct version to use including a link to it.
Sam Fisher
Click to expand...
Click to collapse
Don't ask for help as you've been added to the ignore list....and it's gettin full
Kangxi
Listen here little guy, I was talking to him not you. I asked him three questions to verify what he did because if he doesn't even have the right model phone then this is the INCORRECT forum. The firmware he was trying to flash is incorrect and not stock. T959UVJE8 looks to be firmware for the Vibrant but stock firmware is T959UVJFD and the OTA update is T959UVJI6.
Posting in "our" forum Mr. 3 posts? You are telling me to do more research? That's funny.
Everything I mentioned can be found by simply going to the development section and looking in the Bible. I already mentioned that you need JFD and JI6. The latest version of ODIN is 1.7. All of this can be found in less than 2 minutes.
Bible:
http://forum.xda-developers.com/showthread.php?t=771111
Honestly, you need to start by looking through there. It seems you both have a lot to learn and spoon feeding you isn't going to solve the bigger problem. Hope you get it resolved. Look through there, find the files you need (you need to get use to looking in the Bible) and come back. If you still have problems after READING, I will walk you through it. Good day.
Click to expand...
Click to collapse
kangxi has it right.
~SB
my bell i9000 gt died last night... im pissed...
will probably trade in for a htc... unlock that and leave bell once i get it. they are no help with a issue that is their fault puttin out a phone that kills itself slowly.
i was wondering what steps to take to revert to stock.
i have no lagfix
im on doc jk3 rom
and its rooted
i think my stock version was jg9 i HOPE i can even flash this version...
how do i remove the root though?
anyhelp would be great thanks.
any links to the rom?
no links at all that could help?
I used Kies reg patcher to update to JK4 and am having issues with it. I am in the same boat as you, wondering how to revert back to stock as JG9 was working perfectly fine for me.
Jsick said:
I used Kies reg patcher to update to JK4 and am having issues with it. I am in the same boat as you, wondering how to revert back to stock as JG9 was working perfectly fine for me.
Click to expand...
Click to collapse
i found a jh2 rom...
so i decided to try to get this to work... and hopefully bell wont notice... it is still a stock bell rom i believe.
just can't find out how to flash through odin... and which pit to use... all seem to be failing.
Haha, same here. Been browsing through some youtube guides, but haven't found the answer. My tech knowledge is okay, but some of this is a little over my head. Will let you know if I have any success.
tb5... said:
i found a jh2 rom...
so i decided to try to get this to work... and hopefully bell wont notice... it is still a stock bell rom i believe.
just can't find out how to flash through odin... and which pit to use... all seem to be failing.
Click to expand...
Click to collapse
Just check on samfirmware..
Had my Fascinate since launch date. Waited and saw the DI01 come through/ tried to update my phone...install failed miserably..no matter how many times I tried, even did full restore.
I was going to try to get a full DL09 and flash it to my phone, I have Odin, downloaded the .tar file. But got frustrated. I'm pretty computer literate, but for some reason this stuff just escapes me. Anyway went to VZW today and ordered a warranty replacement, should be here Friday. Hopefully this one works and I will either wait for the rumored 22nd release date of Froyo or I will try and download it and flash it...if I can do it.
What hardware version?
Why didn't u post here before u ordered a replacement. It really seem s like the problem was not the phone but what u did.
Sent from my SCH-I500 using XDA App
Kaze105 said:
Why didn't u post here before u ordered a replacement. It really seem s like the problem was not the phone but what u did.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I did nothing other than what the phone told me to do. If you had read what I posted I have had the phone since day 1 launch. Have not attempted to root or put any other version of firmware on my phone.
So don't come at me sideways about it. I did nothing to my phone...yet
Sorry to hear about your issues, but we probably could have helped you out with getting updated. There was a phone in a local VZW store that is stuck on DH12 as well cause the DI01 update kept failing.
Skrazz said:
What hardware version?
Click to expand...
Click to collapse
i500.04
Firmware 2.1-update1
Baseband S:i500.04 . DH12
Kernel Version 2.6.29
Build number SCH-I500.DH12
imnuts said:
Sorry to hear about your issues, but we probably could have helped you out with getting updated. There was a phone in a local VZW store that is stuck on DH12 as well cause the DI01 update kept failing.
Click to expand...
Click to collapse
It's all good man. Getting a brand new phone as opposed to a refurbished one. I understand what to do, I get the general idea as to how, I can read the steps but I am more of a visual learner, so pictures to go along with these install steps would help someone out like me.
I also work for a VZW Premium Retailer. Corporate stores don't like us much, so kinda shocked the Sales Rep that I had as much knowledge about the phone as I did. It's actually a known software problem with the phones. As well as the issue that if you use the unlock pattern on the phone and fail at it 19 times or more it will lock the phone out...it will ask you for the gmail information that you provided but even that will not work, resetting the phone to stock will not work...I was told this by a Samsung Tech Agent that it was a known software issue with their devices.
Got my new phone today.DL09 on the Baseband....now on to root, and Froyo...hopefully
Godspeed, good sir...
Sent from my SCH-I500 using XDA App
AC has a nice guide and package for the latest froyo leak.
forum.androidcentral.com/verizon-fascinate-rooting-roms-hacks/59348-odin-full-eb01-froyo-leak-packaged-w-root-new-clockwork.html
Soulchaer said:
I did nothing other than what the phone told me to do. If you had read what I posted I have had the phone since day 1 launch. Have not attempted to root or put any other version of firmware on my phone.
So don't come at me sideways about it. I did nothing to my phone...yet
Click to expand...
Click to collapse
Huh? Im not trying to come at you sideways as it says in your first post, you tried to flash DL09, had problems and then went to verizon for a replacement. (Hence the reason why I said some people here could have helped possibly).
Either way, hope you get froyo onto your fine, good luck.
Could you help me? I'm on DH12 and voodoo v.2... i'm trying to basically go back to stock with all the bloat and no root so that I can return the phone...if I choose to... which steps should I take? a direction to a post will suffice... Thank you...
Azaurath said:
AC has a nice guide and package for the latest froyo leak.
forum.androidcentral.com/verizon-fascinate-rooting-roms-hacks/59348-odin-full-eb01-froyo-leak-packaged-w-root-new-clockwork.html
Click to expand...
Click to collapse
Locked and loaded...BADASS...Thank you to all the Devs who make this **** happen. Without your tireless efforts, dedication, relentless question answering..we the masses would be lost..
yuhang said:
Could you help me? I'm on DH12 and voodoo v.2... i'm trying to basically go back to stock with all the bloat and no root so that I can return the phone...if I choose to... which steps should I take? a direction to a post will suffice... Thank you...
Click to expand...
Click to collapse
First you should disable voodoo.
Then follow this post. It should wipe your phone and put a completely stock version of DL09 on it.
Just make sure to use the PDA button in Odin only.
*OFFICIAL* DL09.tar.md5
Azaurath said:
First you should disable voodoo.
Then follow this post. It should wipe your phone and put a completely stock version of DL09 on it.
Just make sure to use the PDA button in Odin only.
*OFFICIAL* DL09.tar.md5
Click to expand...
Click to collapse
You don't even have to disable voodoo. Just flash that and you're done.
Personally I've learn once you do an OTA update, it will not allow you to do it again. It has happened to me when I've tried to do every offical update more than once
thank you for the quick information, I will try it now and report back.
Ok so i know i am a newbie to this sort of thing but i wanted to wrap my head around everything and also specifically to my phone before i decide to do something and the results are permanent.
Firstly ill start off with saying im a Canadian Virgin Mobile customer and i just got the Galaxy S4 (SGH-i337m).
Ok so i want to root my device but i am confused about some of the basic concepts. I saw the tutorial video posted for my specific phone by the smoking android (link for those who havent seen it: youtube. com/watch?v=cI9r5dEcNo4) and i understand that the rooting process is fairly simple.
What i am confused about though is my options once i am a root user and if i ever chose to revert back to original. Lets say i went ahead and rooted my phone. Will i be able to software update through the updates that virgin sends me? also if i am able to then will i maintain root acess?
my second biggest question is lets say for whatever reason i want to go back to the way my phone is now, with the stock virgin firmware. is this possible? and with no trace of the root before (is this the same as achieving original status instead of a custom one)? i know that you can remove the root and then reset the binary counter but im not too sure how all of this works, its a lot to take in at once.
im just trying to clear things up and yes i am quite new to all this (got my s4 yesterday) but i am a quick learner and im just trying to get a grip on everything.
thanks in advance for bearing with me
shibby123 said:
Ok so i know i am a newbie to this sort of thing but i wanted to wrap my head around everything and also specifically to my phone before i decide to do something and the results are permanent.
Firstly ill start off with saying im a Canadian Virgin Mobile customer and i just got the Galaxy S4 (SGH-i337m).
Ok so i want to root my device but i am confused about some of the basic concepts. I saw the tutorial video posted for my specific phone by the smoking android (link for those who havent seen it: youtube. com/watch?v=cI9r5dEcNo4) and i understand that the rooting process is fairly simple.
What i am confused about though is my options once i am a root user and if i ever chose to revert back to original. Lets say i went ahead and rooted my phone. Will i be able to software update through the updates that virgin sends me? also if i am able to then will i maintain root acess?
my second biggest question is lets say for whatever reason i want to go back to the way my phone is now, with the stock virgin firmware. is this possible? and with no trace of the root before (is this the same as achieving original status instead of a custom one)? i know that you can remove the root and then reset the binary counter but im not too sure how all of this works, its a lot to take in at once.
im just trying to clear things up and yes i am quite new to all this (got my s4 yesterday) but i am a quick learner and im just trying to get a grip on everything.
thanks in advance for bearing with me
Click to expand...
Click to collapse
Read these threads...
http://forum.xda-developers.com/showthread.php?t=2301762
and
http://forum.xda-developers.com/showthread.php?t=2312444
Information that isn't in those threads are definitely linked to in those threads. Good luck.
scott14719 said:
Read these threads...
http://forum.xda-developers.com/showthread.php?t=2301762
and
http://forum.xda-developers.com/showthread.php?t=2312444
Information that isn't in those threads are definitely linked to in those threads. Good luck.
Click to expand...
Click to collapse
ok so i read the threads an i understand a lot more now. It seems to me like i have the ability to easily root and then go back to the stock firmware if i please with no consequences. i just have to flash the with the correct rom [and modem?] to put it back to stock and everything should work fine.
i hope i have this straight
shibby123 said:
ok so i read the threads an i understand a lot more now. It seems to me like i have the ability to easily root and then go back to the stock firmware if i please with no consequences. i just have to flash the with the correct rom [and modem?] to put it back to stock and everything should work fine.
i hope i have this straight
Click to expand...
Click to collapse
Why modem? is that really necessary, I think you mean kernel.
if you flash back to stock, modem and kernel will be included.
Have you tried this thread also? you do have a i337m
http://forum.xda-developers.com/showthread.php?t=2269304
Good Luck
Is there a way to unroot my AT&T S4 with a Mac?
blbeesley said:
Is there a way to unroot my AT&T S4 with a Mac?
Click to expand...
Click to collapse
flash the latest at&t official firmware via heimdall
TheAxman said:
Why modem? is that really necessary, I think you mean kernel.
if you flash back to stock, modem and kernel will be included.
Have you tried this thread also? you do have a i337m
http://forum.xda-developers.com/showthread.php?t=2269304
Good Luck
Click to expand...
Click to collapse
so if i just flash to that stock firmware in the link you gave me everything will be back to normal? how would i achieve original and not "custom" status if i have to send the phone back to samsung. would i have to unroot then flash then reset the binary counter? would that be it and im back to the very original state i got my phone in?
shibby123 said:
so if i just flash to that stock firmware in the link you gave me everything will be back to normal? how would i achieve original and not "custom" status if i have to send the phone back to samsung. would i have to unroot then flash then reset the binary counter? would that be it and im back to the very original state i got my phone in?
Click to expand...
Click to collapse
also check out this post
xBeerdroiDx said:
flash the latest at&t official firmware via heimdall
Click to expand...
Click to collapse
Will heimdall use the zip downloaded from sammobile or do you have to extract the .tar.md5 from the zip?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
xBeerdroiDx said:
also check out this post
Click to expand...
Click to collapse
your good sir, you got 2 thanks from me today...no more for you actually, I'm out of thanks, get you tomorrow.
Good help.
TheAxman said:
your good sir, you got 2 thanks from me today...no more for you actually, I'm out of thanks, get you tomorrow.
Good help.
Click to expand...
Click to collapse
:highfive:
community
cheers, buddy