i updated my other half's lg GT540 to 02 official ROM the hand set couldn't receive calls so i decided to use the baltic rom and kdz crashed and now all i get is lg logo thats it i can get it in download mode but nothing happens kdz doesnt pick it up wen plugged in to my pc windows 7 64 bit i have read about a few place that to disable the modem but even that dont show in windows device manager any more ideas to what i can do
thanks
Related
Aw man I need some serious help here! So yesterday I was following instructions on the android forum to get my phone to 2.3.7 and so I downloaded this fastboot ROM and flashed it to my GT540 but I later found out you needed to have a rooted phone in order to get into fastboot and everything in the OS from android forum kept crashing my apps (couldn't get Z4Root), so I decided to try to flash it to 2.1 with the LG Update Tool and it got stuck at 4 percent. I unplugged it and now my phone was stuck at the Vodafone logo. I used KDZ Updater to flash FranceOrangeV20C_Fastboot to it and it didnt work (some parameter error showed up). Now my phone is stuck on the LG logo and it isn't detected by anything! PLLEASE HELP! I bricked my phone!!!!
this happened to me before dont know about you but i would send it to lg.
Figured it out!
OK so in KDZ Updater change the phone mode to CS Emergency and go into Download Mode in the phone and then just flash
This is if you get errorcode: WParam:100 LParam:4008
mine was in a worst condition the phone will not boot in anyway
As your phone turn on there is always a way to save it
Don't worry, we all been there
Follow instructions properly anz don't be smart are solutions to avoid bricking.......now i agree send it to lg if still under warranty.
Sent from my LG GT540 using xda premium
go into download mode
connect it to ur pc
go into device manager and turn off android modem
use kdz updater english version and change type to 3GQCT-Smartphone(WM)
chose ur rom and run
That's what i did when my phone stuck at LG logo and the only thing i could do is go into download mode ^^
Hope it help
i tried to update via LGMobile Support Tool but it stuck at 4% and i pull out the usb ... and my phone didn't opened anymore since then(black screen)... i think is bricked...i tried to connect in emergency mode without battery and volum key but nothing ... the pc sees " LGE android platform USB serial port (com5)" in device manager, but when i try to update with KDZ_FW_UPD it says that the phone isn't connected...
any ideas would be helpfull... thx
last option will be jtag in an authorized service...
L.E. I've tried with B2CAppSetup and pc recognize my device as p705 with software v20b but i can't do anything ...
I have the same EXACT problem! The 4% thing happened to me too. But in my case I own a LG Optimus L5 (very similar).
So far, no solution. I did, however, found some light in a post in cyanogenmod forums. I can't post the link, but search for "Hard Brick - To Hell And Back - Guide To Recovery".
Using that software we should be able to rewrite the firmware. Please, take a look, we can pull this off if we help each other.
The problem is that the firmware of the LG Optimus L5/L7 does not contains the same filenames requested by the software, so I'm stuck there.
Last resource: using the "riff box jtag", but it's expensive (for me) and I have to buy it abroad, since I'm from Argentina.
Did you managed something else?
dont worry try again install stock firmware on LG support tool, dont worry if it stops on 4% i had this too, maybe after 10 min it will load 5% and then no stops anymore.
sorry for bad english
The problem is that LG Support tool won't recognize my phone anymore it won't even turn on.
Here's the story in brief:
I connected the phone to LG PC Suite, it offered an upgrade to D80220C. I started the update, and left the phone connected to PC Suite over night to allow PC Suite to download the file.
I wake up in the morning to find the phone stuck on the LG Logo with the LED blinking like it does on start up.
Since then, the phone will not boot past that logo.
I tried the few guides for Stock ROM Flashing, but LG Flash Tool always says the phone isn't connected while in download mode.
Can anybody recommend a way to make the phone work again anyhow?
alsiladka said:
Here's the story in brief:
I connected the phone to LG PC Suite, it offered an upgrade to D80220C. I started the update, and left the phone connected to PC Suite over night to allow PC Suite to download the file.
I wake up in the morning to find the phone stuck on the LG Logo with the LED blinking like it does on start up.
Since then, the phone will not boot past that logo.
I tried the few guides for Stock ROM Flashing, but LG Flash Tool always says the phone isn't connected while in download mode.
Can anybody recommend a way to make the phone work again anyhow?
Click to expand...
Click to collapse
did u make a factory reset ? and when u use lg flash tool u should be on download mode . r u ?
azher98 said:
did u make a factory reset ? and when u use lg flash tool u should be on download mode . r u ?
Click to expand...
Click to collapse
I cannot Factory Reset the phone, it gets stuck on the LG Logo itself. And I am unable to use the Flash Tool as well in Download Mode as Windows Keeps saying phone is not connected.
alsiladka said:
I cannot Factory Reset the phone, it gets stuck on the LG Logo itself. And I am unable to use the Flash Tool as well in Download Mode as Windows Keeps saying phone is not connected.
Click to expand...
Click to collapse
Device Manager > find the device and right click > Change COM port to 41
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0
Hey guys i really need help i'm in a pickle as i soft bricked my phone LG G2 F320L. I did that last time but somehow i got my laptop to recognize my phone but this time it's not being recognized and i forgot how to. When i use LGUP it shows "Model:uknown,Please select a model" and in flash tool it goes up to 2 percent in the third step and then says try again by removing the battery. I even tried PC suit but i can't seem to make it work. Any help?