Related
I have searched this and other forums and have not seen either this problem or an answer to it. Per AT&T's suggestion, I just upgraded to the new AT&T rom version that adds PTT and seems to have big problems. My current issue is that when I first boot up and connect via GPRS/3G all works well. When I get to a wifi area and switch to wifi, again all works well. However when I leave the wifi area (or just turn off wifi) I can't get any data via GPRS/3G. The balloon comes up saying it is connecting. The little "G" and bidirectional arrows in the top left indicate it is connected. However in the browser, it just continues to grind away with "Locating" in the bottom right corner until it finally times out and puts up a screen that says that the "page cannot be displayed because the connection was lost". I open the connection manager and press and hold the "Data Connection" icon until that goes off and try again, same problem. The only way I can get GPRS/3G data connection to actually work again is to reboot. Any ideas what is going on or how this can be fixed? Forgot to add that this is an HTC 8525. Thanks.
From your description I wasn't able determine whether AT&T's suggestion was aimed at remedying the issue, or if it's something that came about with the update.
Assuming the latter, you may want to try a hard reset first and run it for a bit before loading any other apps. Failing that, reflash the ROM. I had a lot of trouble with my radio when my 8525 was new, but it mysteriously cleared up after a few radio flashes.
Thanks but still a problem
Thanks for your thoughts here. I hard reset and reflashed.
Yes the firmware is the latest one that AT&T has suggested that everyone who had the older Cingular phones upgrade to. It provides the AT&T logo, the "push to talk" feature, and some other junk. I have contacted AT&T about this and their response was to send me a new phone that they claimed had the old firmware, since they have been getting a lot of complaints about the new firmware. It didn't have the old firmware and also it's SIM card reader appears to be broken. I called HTC and they said that they too have had lots of complaints about the new firmware quirks but had nothing to offer to solve them. Anyway, the old firmware had no problem switching between wifi and CGRS so I don't think it is in the hardware. On the other hand I'm surprised that nobody else is encountering the problem from the upgrade.
I'm having the same prob. Purchase three of these phones and the other users have little technical expertise. First I set up a sync with my office PC. Then loaded the ROM update. I run MAC's @ home had difficulty connecting to my home wifi. Finally determined that the 8525 would not accept the 13 key ASCII wep password. Needed to use the HEX. So I connected. Went to work and had problems syncing with my PC. Active sync had to rediscover the device. Now I'm back home and can't connect again. My Device ID changed names upon "resyncing" and I updated the Airport Base Station with my new name. I've spent a lot of time on this issue.. Maybe I need to send em back for an iPhone!
Well I found a solution to it
This is a great forum - though somewhat hard to search through thoroughly. Anyway the solution for me was to go back to ROM 1.34. Found how to do that through flashing from the micro card at http://forum.xda-developers.com/showthread.php?t=311704&highlight=cingular+8525+rom+version and getting the production ROM version at http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades. Back to normal - everything works fine. Just for a trial, I also downloaded ROM V2.1.1 and it works find also - but sure seems a bit large - ends up with 42.9M of storage free vs V1.34 that has 50.25. Think I'll try the the memory expansion process at http://forum.xda-developers.com/showthread.php?t=298327&highlight=want+more+storage. That seems to at least provide a more than 9 megabyte smaller MBH file but I don't know what that translates to in memory usage yet.
Suspect there is a way to fix this problem but I haven't seen anything in the forums on it.
Well, i have scoured the site, and tried and tried and tried to no avail, I just cannot seem to figure out this puzzle!
Actually it is a multi-layered puzzle...
I, of course have a Cingular 8125. Thus far I have unlocked the sim lock, unlocked the CID lock, enabled wireless G mode, and installed some programs.
These are the programs that I am using.
I have Resco File Manager (full)
Resco Registry (full)
TCMPMP
HTC Streaming Media
Opera (full)
What I am interested in doing is this. I would like to be able to view streaming video (imagine that). So far I cannot. HTC streaming media installed well enough, but when I click on the icon it says that some of the components are missing, or it's not signed by a trusted certificate...
When ever I go to You Tube (Regular), it says that I either have Java turned off, or do not have the latest Flash Player...
Oh I forgot to mention I also have Adobe Flash 7 mobile installed...
When I go to m.youtube.com, and I click on a vid a progress bar shows up and progresses, but nothing else.
I really don't want to mess around with installing roms, as i would rather know how to do it on my own. I am no stranger to reg hacks, seem edits, and basic hex as I already hang out mostly on moto modding sites.
If i do need to install a rom, that is fine I suppose as long as I have the ability to back up my current one (always backup before you f-up).
I also have a question or two about WM6. But will leave it at what I already have inquired.
Thanks in advance for all the help! I am confident that I will get good answers as the expertise on this forum seems to be quite high!
Im right there with you buddy... I did all the things you did and still no luck... This phone seems to be hopeless.... Not working like all the others with the installed software... Hope somone can help...
well, i'll tell ya, I figured it out all by my lonesome...
What was needed is a drivers pack, and I will be more then happy to give you the link that will take you to it...
What you need to do is located right here at this link
http://www.mediafire.com/?5pjefxzvzj0
Basically what you need to do with it, is unzip and then copy/cut and paste the .dll files into the windows folder of your pocket pc.
if it asks you if you want to replace files then just skip over that file and go to the next.
Now the only site that I have found that seems to be usefull is of course, m.youtube.com
If you happen to find anything else that works please let me know as youtube seems to be the only site that out fit themselves to stream media to PPC or iPhone.
...Oh and by the way this only works if you are using ie mobile. for some reason it doesn't work with opera. I don't know why.
But it does look good however. All things considered, it looks pretty good.
Let me know how you made out!
Thanks for the help... IT loads now but every time i connect it says "failed to connect to network"... Do you get that?
yes i did, and i will be more then happy to help you out just as soon as I can turn my stupid phone on...
See, I just got a car charger with another phone (one of those stupid ebay "included free" car chargers). And I just got a new car where I could actually have a use for it. So I plugged in my wizard/cingular 8125 into it the other day assuming that I would charge it all nice like as long as I left it in the car...
Nay, the charger apparently does not work and now I have to leave the wiz on my usb charge till God only knows when (If you have never let one of these drain to absolute DEAD, don't it takes forever to get it back again...)
So... yes I did get that message, and yes I did figure out how to get it to work, but no i don't remember how I did it...
So I will get back to ya soon!
i think you have to have Windows Mobile 6 to stream media... i dont think the streaming media player works with windows mobile 5. I could be wrong, but I am pretty sure.
I stream youtube and all kinds of stuff on my old 8125... MobiTV, XMRadio etc.
okay here's the deal...
No phone can stream regular internet (even the iphone in all it's glory can't do it). The reason being has something to do with the type of stream that is being streamed...
Hence why youtube.com created m.youtube.com...
It has to be mobile, and someone told me the format not too long ago, but I forget what it is.
You can stream it on Windows mobile 5 using HTC streaming Media player. No mods, no hacks, no ROMS. Straight up, out of the box.
But again, the key is finding a site that is set up to stream it on a mobile phone... Which in another reason most sites offer podcasts. It's a cheap alternative...
Never the less it's only a matter of time before cnn.com foxnews.com etc all follow suite and say hey our users want/need streaming mobile media, and there you go...
I myself have played with streaming radio (somafm.com) using pocket player. It works great. Audio is so much easier to do then video which is why you can do it on any format.
My issue now is that my battery is dead dead, and I don't think it is going to accept the charge... Which means either my phone is fried, or my battery is fried. If its the phone, well there goes that... If it's the battery, maybe I can wrangle a battery out of Cingular or who ever they are calling themselves these days...
So it may be a while before I am able to tell you how I got past the failed to connect to network error.
All i can say is play around with you internet settings, and try fussing with the media player settings (Ergo Buffer etc). Make sure that it is able to access all ports, and that if you are using WiFi that the ports are open.
hopefully i will have a charge tomorrow.
I've had this problem.. try the actual connected to the wall charger.. not a cheap knockoff- but one that has a usb-usb connector that goes into the wall.. i'm not positive what it looks like. but my father has one and it's helped my 8125 more than once
good luck,
damon
Thanks for the reply on the wall charger.
I actually googled it last nite, and came across someone else who did the same stupid thing as me... Apparently, for some cosmic reason, when the wizard is dead it will only accept a recharge from the stock, in the box charger...
Don't ask me why, I thought USB started with the word Universal...
So new wisdom for the day, when your Phone is totally dead, it will only charge on the stock charger that came in the box. Now why it wouldn't accept a charge on my USB cable is beyond me. Everything else I own has no problem with it...
So thanks again for confirming my findings... Good stuff to know!
Anyways back to the streaming problem at hand. Now that my phone is powered up, and ready to rock I will tell you the settings that I have...
Under start\settings\connections\ network cards. Have it saying that it connects me to the internet.
Don't know if that helps, but thats what I have and I remember that I did that my self.
Next under programs\streaming media\options I have connection via internet. I do remember changing that to get it to work. I just changed that particular setting, and can confirm that by changing to something other then what my phone is connecting to will say failed to connect. So make sure that it is the same as the previous step.
Next still under Streaming Media\options I have my UDP ports running across the gamut. Ergo, From 1024 To 65535. I do not know if it is necessary, but I would leave it open like that depending on where you are some places may have some ports closed off, and others might not.
Then under Media Buffer, I had my originally set to 10 seconds, but now have it set to 5 seconds.
I also did the registry edit that enables wireless g mode. There is a slight noticable difference in speed.
Now here's the kicker... After you get all that done, and everything works and so on, and your phone is now comparable to the iPhone (which my can now do everything the iPhone can do, cept for making phone calls cause I just use my wizard as a dedicated Pocket PC, but it can do one thing the iPhone can't do, and that is have a visualizer going when I am listening to MP3's), your now going to find that the video's that they have on m.youtube.com right now, at this very moment...
really kinda suck...
For some reason, youtube/google=gootube, decided to convert only the absolute worst videos they have. No music video's, no news videos, nothing. Just a bunch of what appears to be video blogs, and not much else...
Sure there is a trailer or two. But it will be a while before it becomes the youtube that we are all familiar with. You can't even find the numa numa guy on it yet...
I mean i know that gary isn't the end all of viral vid's, but he is, at the moment, still the most popular...
That or Star Wars kid...
Now my question is, does anyone know of any sites where this new found feature can be put to good use? Foxnews.com for some reason thinks that only people who are subscribed to cingulars 3g data package can watch their video's. Cnn.com can only d/l podcasts, which takes forever and is usually not worth the time because by the time you are done, you've already finished your cappuccino at the cafe' and are already out the door.
So again, does anyone know any good sites???
...oh and one more thing, streaming with the HTC Streaming Media only works via internet explorer. Sorry, Opera, even the full version, doesn't work...
CID Unlocking the 8125
Dear PPL
I have a used 8125 and am not sure if it is CID locked or unlocked. I am using it in India. I can insert any sim card so it seems to be SIM unlocked.
Before CID unlocking it, how do I tell if it is already unlocked or not.
Appreciate your replies.
Also which is the cleanest, no non-sense WM6 ROM for the Wizard, I need a good camera patch, and everything working. Including GPS functionality.
Thanks
this is the title... title...
as far as sim locking goes the only thing that I could do was plug in another card from another provider. That's how I figured out that I unlocked my properly. The sim lock is from network to network, not phone to phone. So say you have a friend that is on A-Cellular and you are on A Cellular, you guys can swap sim cards all day long and the phones will work.
However if you are on A-Cellular and your friend is on B-Cellular, what should happen is that you guys cannot swap phones, unless your phones are unlocked. So that is the easiest way to tell. (A Cellular/B Cellular mean nothing I was just using that as an example BTW).
Now, as far as CID locking, I really haven't the foggiest idea. I don't know how much this forum is kept up to date, and I have not found any stickies or tutorials that really explain what exactly some of these things mean...
Sorry I cannot help any further then that
Oh and just curious, do you mean GPS or GPRS? GPS function you will need something like tomtom navigator hardware for that to work (generally plugs in the SD card slot, not the USB slot. Kinda Stupid in that respect). GPRS should already be functioning on that phone. Of course should being the operative term...
solution to "failure to connect" error
so, i have the 8525 (htc ttyn) with wm5, and the solution to this problem is quite simple....thanks to boe-dye for alluding to this setting.
the >>progam/stream media/menu/options -- connect via:>> needs to match the method which you are connecting to your streaming source
simply put, if you're using your nic (802.11 b/g) it should be the internet or whatever matches your >>settings/network card -- connection>>
likewise if you are connecting via gsm/3g/mediaNet etc. then you should select that "cellular" signal
hope this makes sense.
(the name "the internet" is misleading, since even using gsm, etc connects you to the actual net the same as your 802.11 card)
enjoy.
oh cool... Well that makes much more sense as to why it worked
Now I have a question...
Does anyone know how to get Retina WiFi Scanner to work??
My HD2 is an Australian Telstra version hence with a lot of preloaded links.
1. some of these which I cannot delete, any Ideas?
2. I have downloaded a small app to control bluetooth and wifi as I use them a lot, how do I get this to the sense screen, I am in and out of the car a lot.
3. How can I force opera to use wifi instead of the carrier when I am in wifi range
4. I am about to use the replacement HTC sense app by cookie, is it a modified version and will it blend in with my carriers requirements.
5. lastly for today when the phone is locked and the slide is used to unlock, i notice after many disconnects that the buttons are still active, whats the point of the finger slide, or am i missing some thing, I would like to not accidentally disconnect people when i pull the monster from my pocket.
Thanks guys
I appreciate your help
Hey as far as designating a data connection to a specific program there is a cab you can install called wmlonglife that will accomplish this check out this thread to find out more about it
In regards to number 3, once you're connected to Wifi, your HD2 should just use WiFi for everything that uses the internet rather than your carrier.
This means Opera should automatically use Wifi when connected!
let me first start off by telling you that in no way shape or form am I skilled enough to be a developer nor am I asking the deleloper with the skill to take this on. I have searched a few forum and I really can't find any info about this subject.
I have a siearra wireless card USB598 the service is provided by Sprint, Does anyone know if it would be possible to make this work on the gtab? Or is it even possible to make it work in an android system?
When I plug the card in it powers up and seems to be doing what the card does but like you could guess it does nothing else. I didn't expect it to do anything else but I didn't think it would even power on.
I am not a developer either, but off the top of my head (devs feel free to correct me):
You would need drivers for the AirCard (no idea, but maybe the Linux drivers [if they are made for the card might work])
You would also need some sort of software to have the AirCard connect to the mobile network and to have the GTab use the Aircard as a means of communication
Dan
Velcro a mifi onto the back. : -)
Sent from my GTablet-TnT-Lite using Tapatalk
I have an air-card, as well. It's on my list of to do's but it will be tricky at best.
I had a sierra air-card a few years back, and got it to work with Ubuntu using some ppp commands. I figure that would be the most likely route in Android, since it has some *nix similarities, but I haven't gotten very far.
If you look at "dmesg", your card might be loading up. But the problem is actually getting old modems commands to it to get it running. I think.
ultimind said:
Velcro a mifi onto the back. : -)
Sent from my GTablet-TnT-Lite using Tapatalk
Click to expand...
Click to collapse
YES! Sprint Overdrive 4G! WooHoo!
It'd be a lot easier to try one of the 3G/4G-to-local wireless "boxes" available through many wireless providers (I use MyWi on my jailbroken iPhone 3GS though I'm looking into clear.com's service on the go). That way not only your GTablet, but your laptop and other devices can connect to the same connection and even your friends.
The air card is provided by my employer so I'm kind of stuck with it and getting into a myfi device isn't an option.
It's not really a huge issue I can always tether to my phone, It would just be nice to pop in the card and be up and running. The card also has gps built into it and I could see some use in that too.
I think drivers are going to be the biggest issue the MFG only supports MS and MAC, but there are some threads out on the web were people have gotten them to work in ubuntu. Beyond the driver issue there still needs to be some type of dialing software. On a windows box you can use a simple dialing software and dial a #77 and it will connect.
One other thing that this card has the ability to do is NDIS where the card becomes a network card and as soon as it's inserted into a pc it connects automatically but I'm almost 100% sure that it is still software based.
Thanks for the feed back.
greyspacealien said:
The air card is provided by my employer so I'm kind of stuck with it and getting into a myfi device isn't an option.
It's not really a huge issue I can always tether to my phone, It would just be nice to pop in the card and be up and running. The card also has gps built into it and I could see some use in that too.
I think drivers are going to be the biggest issue the MFG only supports MS and MAC, but there are some threads out on the web were people have gotten them to work in ubuntu. Beyond the driver issue there still needs to be some type of dialing software. On a windows box you can use a simple dialing software and dial a #77 and it will connect.
One other thing that this card has the ability to do is NDIS where the card becomes a network card and as soon as it's inserted into a pc it connects automatically but I'm almost 100% sure that it is still software based.
Thanks for the feed back.
Click to expand...
Click to collapse
For the ZT-180 tablets we got a number of these going as they looked like serial modem interfaces using ppp via the USB (might need to turn off/disable) any builtin diskstore... there sometimes required a build.prop edit to set the tty correct... I'd normally say look over on Slatedroid at our zt180 section as there were a few threads for different 3G dongles but mostly similar instructions... except slatedroid's been bottom up the last 30 or so hours... the zt-180 thread here is HUGE but I suspect you could find most of the same info scattered throughtout there also as maybe a starting point...
Novatel Ovation U727
The Ovation U727 supports Linux in addition to Windows & MAC. Data sheet indicates it has built in GPS-A in addition to 3G. Anyone tried one of these? I might get a used one & give it a try.
I just got a Samsung Vibrant yesterday from a 3rd party, and I'm very excited. I know I need to read a lot on this site, but since this is my 1st smartphone, please forgive my basic/naive questions, be gentle on me, and give me some directions so that I won't have to walk in the darkness.
1) I haven't done anything essential to the phone yet, and I'm considering to root, unlock and the phone, and upgrade from 2.1-update1 to 2.2. Which one should I start first, root, unlock, or upgrade? Even though I haven't done much on the phone, do I still need to go through the backup before rooting?
2) Between the IMEI and S/N barcodes, there is '10.10' on the phone which I assume is the manufacture time of Oct. 2010. Would the GPS 'fix' be done with my phone (Build Number: Eclair.UVJI6)? Considering the amount of complaints about the GPS on Samsung Vibrant, how does the GPS work with offline applications like CoPilot? Where should I put the CoPilot Map, in internal or external SD?
3) If I want to make phone calls through WIFI connections without eating up my minutes, what kind of VOIP combination should I consider? Google Voice?
4) What web browser do you recommend? Other nice applications should I put in?
5) When I select Avatar, it says "File not found". Is it supposed to be in the external SD (which seems empty)? Where can I get the file?
Thanks a lot for your help!
I would suggest reading the bible in the Development section. or this
get the proper drivers here.
root with Superoneclick found here. There is another version floating around that works better that is called SuperOneClick for Froyo.
fix 3e recovery (if running stock froyo) software found here runs from your computer with your phone connected and usb debugging turned on.
download the Clockwork Recovery Unlock.zip from either Rom Manager or here (put it in your phones internal SD root)
I HIGHLY RECOMMEND TeamWhiskey's Rom Bionix-V 1.2.1 found here
But I would suggest getting to know your Vibrant/android phone if you have never owned one first.
Edit: Calling over wifi uses your plan's minutes. Its meant for poor reception areas where you might have wifi with broadband internet.
Edit2: Most people get rid of the "Avatar" its just the movie and takes up space. I believe it should be on the SD card that came with the phone.
Congrats on the phone
1st is to root it you can use the super-one-click, like the previous post said. There are other rooting but this one is very easy
After that, Read up on the roms the Axura, Trigger, Einherjar, and Bionix are all fine and depending on your need you have really great choices, the Axura has remarkable battery life, for example. So do the reading on which you would like. Once you pick one flash it. Then get Rom manager and Titanium back up. Free from the app store. Then you can start playing. Should you decide that you do not like or just want to try another rom, you can flash over the last most times with out problems. One thing (read the bible) if you do flash over one of the custom roms you will need to disable the voodoo lagfix. This is actually a file conversion. So Read up on that as well. Hope that helps you.
[Q] Newbie Questions
I too got a vibrant yesterday and then upgraded to 2.2 of skies mini. The problem is now I have not found a way to get it rooted with 2.2. Any ideas?
coldasice304 said:
I too got a vibrant yesterday and then upgraded to 2.2 of skies mini. The problem is now I have not found a way to get it rooted with 2.2. Any ideas?
Click to expand...
Click to collapse
There is the super one click or you can get a copy of the update folder that roots the phone.... place it on the internal sd card go to recovery and install update...... that also will do it. LOOK IN THE STICKY/BIBLE
Thanks a lot for the great help, FlyingPoo and oka1! I really appreciate it.
A couple of more newbie questions:
1) When making phone calls, sometimes I need to key in some options after the phone is connected (for example, when you call a customer service 800 number). How can I bring up a on-screen keyboard when the phone is already connected?
2) It seems my Samsung Vibrant has much weaker WIFI reception than my Mac laptop, and I have to bring the phone closer to the router to get detectable WIFI signal. Is there anyway I can boost the phone's reception capability?
Thanks a lot!