Related
I searched for quite a while, and never found any ideas on how to fix this issue.
I followed the youtube video and got the clockwork mod installed correctly. However, anytime I try to install a rom via recovery, it shows that it's installed successfully... but after rebooting, my device freezes on the boot screen (after magdlr displays GO GO GO.)
I've tried 2 different roms, both MDJ builds, and they both do the same thing. I made sure to wait 15 minutes when booting for the first time, thinking it may be slow on first boot... but it never booted. Does anyone know the partition size to use for MDJ's roms? I thought this might be part of the problem, but I'm open to any ideas and suggestions.
In the meantime, I'll just install via Magdlr... but I would really love to have Clockwork mod working. So, any help with this is greatly appreciated.
Make sure you have HSPL 2.08.
Make sure your Radio is at least 2.10.50 and above.
Done and done.
Then you need to Partition the NANDFLASH.
flash.cfg
Code:
misc ya 1M
recovery ya|ro 5M
boot ya|boot|ro 5M
system ya 150M
cache ya 10M
userdata ya|asize|hr allsize
I use the above for MDJ Gingerbread, but now, I am thinking of allocating 350M to system partition instead of 150M which is too small to play with other ROMs.
Finally, after you repartition, boot into Clockwork Recovery on your SD Card, then install ZIP.
After you are done, turn off your device and remove the SD Card. Turn on the device and see if it works.
Clockwork cannot partition your NANDFLASH, which is why you need to use DAF.exe and flash.cfg file to partition the NAND.
gilla409 said:
I searched for quite a while, and never found any ideas on how to fix this issue.
I followed the youtube video and got the clockwork mod installed correctly. However, anytime I try to install a rom via recovery, it shows that it's installed successfully... but after rebooting, my device freezes on the boot screen (after magdlr displays GO GO GO.)
I've tried 2 different roms, both MDJ builds, and they both do the same thing. I made sure to wait 15 minutes when booting for the first time, thinking it may be slow on first boot... but it never booted. Does anyone know the partition size to use for MDJ's roms? I thought this might be part of the problem, but I'm open to any ideas and suggestions.
In the meantime, I'll just install via Magdlr... but I would really love to have Clockwork mod working. So, any help with this is greatly appreciated.
Click to expand...
Click to collapse
I have the same problem
What is the brand, size and class rating for your MicroSDHC card?
Have you tried doing a low level format on the card yet?
It is not that hard to choose a partition size for system.
Look at the size of the system.img, then allocate that size. So say system image file is 237MB, you just allocate 250MB.
350MB seems to cover most of the DesireHD stock CW rom.
250MB covers most other custom CW rom
150MB covers MDJ's Gingerbread 2.3
Dear Friends,
I usually flash ZIP Android using CWM, through menu no.8 in MAGLDR menu. CMW was flashed via USB Flasher menu no.5 in MGLDR menu.
But after several times of failures, I gave up. I hope somebody can inform me what went wrong.
Here is the issue:
After flashing CWM (partition layout) and try to go into recovery mode, the screen says:
"ANDROID LOAD RAW
ERROR: ERROR: Cannot read kernel image"
I tried so many attempts but always like that. I did task 29, reflashing MAGLDR, radio, I even tried to go back to Winmo and back again to reflash HSPL 2.08 and so on. But no luck
I remember that this happen after I tried flashing CWM using SD Card method (via menu no.2 in MAGLDR). If I used this method, I can go into recovery mode. I dont like this method, because I never succeeded flashing ZIP ANdroid using this method. That is why I want to go back to recovery mode via menu no.8 in MAGLDR.
Is the problem related with what i did (flashing CWM via SD Card method)? Is the NAND is damaged?
Is there a way to solve that?
Many thanks in advance
silverwind said:
After flashing CWM (partition layout)
Click to expand...
Click to collapse
what are the contents of flash.cfg? (you can open that file in notepad)
samsamuel said:
what are the contents of flash.cfg? (you can open that file in notepad)
Click to expand...
Click to collapse
Which one? is it the one with CWM partitioner lay out?
This one was flashed when I tried to flash: Ultimate Droid v.3.1.1.v2:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 30M
userdata ya|asize|hr allsize
And this one is the standard one with 150MB lay out:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 44M
userdata ya|asize|hr allsize
I used either one as per instruction in the relevant thread
hmm, and there is deffinitely a file called recovery-raw.img in the same folder? do you get any error messages on the phone screen when you flash the cwm layout?
samsamuel said:
hmm, and there is deffinitely a file called recovery-raw.img in the same folder? do you get any error messages on the phone screen when you flash the cwm layout?
Click to expand...
Click to collapse
Yes. Never happened before until I flashed cwm using ad method as explained in the following:
http://forum.xda-developers.com/showthread.php?t=987531
once you install CWM you are installing a rom from zip arent you?
if you just install cwm then it wont boot any existing rom, thats what i have found from past experience
Richy99 said:
once you install CWM you are installing a rom from zip arent you?
if you just install cwm then it wont boot any existing rom, thats what i have found from past experience
Click to expand...
Click to collapse
After flashed Recovery via AD SD boot, I flashed the ROM. But it won't boot. So, I decided to reflashed Recovery via USB FLasher (of course I did task 29, flash MAGLDR again).
After that, I went into MAGLDR menu and selected no.8 (AD Recovery). And, it wont boot to Recovery. It says ERROR cannot read kernel image.
My point is that I want to flash ROM via CWM (this CWM was flashed via USB Flasher), but the CWM itself failed to boot (after successful flashing).
I dont have problem boot into CWM if it is flashed via AD BOOT (menu no.2 in MAGLDR) and I cant flash the ROM (though the ROM fails to boot).
Any idea?
ive not used that edited/tweaked cwm, but two things come to mind.
First off, latest magldr required, check? (im not scrolling back to read, so sorry if you already said that)
and secondly, from teh error you are getting, it can only be that somewhere, (possibly when you are restoring from a backup taken when there was no recovery partition?) you are either wiping the recovery partition, or you arent loading back the contents of the recovery partition.
samsamuel said:
ive not used that edited/tweaked cwm, but two things come to mind.
First off, latest magldr required, check? (im not scrolling back to read, so sorry if you already said that)
and secondly, from teh error you are getting, it can only be that somewhere, (possibly when you are restoring from a backup taken when there was no recovery partition?) you are either wiping the recovery partition, or you arent loading back the contents of the recovery partition.
Click to expand...
Click to collapse
Yes Magldr 1.13. I didn't restore any nandroid backup. How can I restore if recovery failed to boot?
It seem this tweaked cwm did/wrote something In the NAND that cannot be erased by task 29 or by flashing stock rom. I stiil can bot recovery through AD boot (menu no.2 in magldr) the tweaked recovery show version 3.0.1.9. Maybe I
should try mtty?
think id concentrate on getting back to winmo stock with an sd card flash, wipe the lot and start over yet again.
As far as I remember, after you flash magdlr 1.13 you need to flash CWM to get the menu point 8 (ad recovery) working. Magdlr 1.13 itself doesn't have the CWM built in, but it supports CWM.
Sent from my HTC HD2 using XDA App
samsamuel said:
think id concentrate on getting back to winmo stock with an sd card flash, wipe the lot and start over yet again.
Click to expand...
Click to collapse
Like I said, I did start it all over again
But, still it didnt help. That is why I am beginning to think that task 29 does not erase all NAND or else there is a damaged/defect in the physical NAND. Should I try use MTTY?
greg17477 said:
As far as I remember, after you flash magdlr 1.13 you need to flash CWM to get the menu point 8 (ad recovery) working. Magdlr 1.13 itself doesn't have the CWM built in, but it supports CWM.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Yes I know. There are 3 methods (as I know from XDA ) to boot Recovery Clockword Mode (CWM). Firstly, flashing via USB Flasher (menu no.5) and after flashing, we should select menu no.8 to go into CWM mode (this one is the issue I am talking about), secondly, flashing via AD Boot (menu no.2), it will directly bring you into the CWM menu, and thirdly, using cLK (which I never try it).
I just wanted to try the second method and it works. However, due to the partition lay out issue (as far as I am concerned, the second method doesnt provide flexibility in providing partition lay out. it uses 150MB lay out). So, for the ROM requires different partition layout, I need to flash CWM in accordance with the relevant ROM requirement. This can only be done if we flash CWM via First method. When I flash CWM (for different partition lay out), it seems flashing successful , but when I selected menu no.8 to go into CWM mode it then says: "Error, cannot read kernel image".
Up to now, I can only boot CWM using second method. I just hope the dev of this method can provide a way to flash different partition lay out or did I miss something?
thanks
does this occur with the standard content of raiderx' recovery download, for example the 400m layout...? you can try to edit the "recovery" line inside flash.cfg: remove "filesize" and instead type "6M", so it shows
...
recovery rrecov|ro|nospr 6M recovery-raw.img
...
maybe there are bad blocks on NAND (which is normal, especially after excessive flashing, which is native to us hd2 users due to the mass of roms available for it ) which are causing this.
alternatively you can try to first delete the original "recovery-raw.img" inside the original raiderx recovery folder and then copy the new one; or to use another windows machine (or harddrive in your computer, if exist). maybe there is sth wrong...?
if all you've tried already and other tipps isn't / aren't working, it would be interesting to know if this occurs if you're using cLK; pure testing purpose
i hope you'll get this running... the sd method is no solution in my opinion.
seadersn said:
does this occur with the standard content of raiderx' recovery download, for example the 400m layout...? you can try to edit the "recovery" line inside flash.cfg: remove "filesize" and instead type "6M", so it shows
...
recovery rrecov|ro|nospr 6M recovery-raw.img
...
maybe there are bad blocks on NAND (which is normal, especially after excessive flashing, which is native to us hd2 users due to the mass of roms available for it ) which are causing this.
alternatively you can try to first delete the original "recovery-raw.img" inside the original raiderx recovery folder and then copy the new one; or to use another windows machine (or harddrive in your computer, if exist). maybe there is sth wrong...?
if all you've tried already and other tipps isn't / aren't working, it would be interesting to know if this occurs if you're using cLK; pure testing purpose
i hope you'll get this running... the sd method is no solution in my opinion.
Click to expand...
Click to collapse
Thank Bro, I will try your suggestion and let u know the result.
I also guess there is something wrong with the NAND, maybe the cluster, block, etc. Maybe need to be defragmented (is there any app for doing that?)
I use standar 150MB partion layout from Raider x and also 135MB layout for flashing Typhoon Cyanogenmod.
I still can flash using DAF, but since there is only few ROM for this method, then I would prefer to go through via CWM
thanks again
sure, no problem! one additional question: this really started out since you've used the sdcard files?
cwm is essential and really needed, especially as the most of chefs doesn't provide DAF ROMs anymore. you want to flash typhoon cm7, right? if nothing is working for you, i'll create a daf version for you, so that you at least can use this ROM. just let me know.
seadersn said:
sure, no problem! one additional question: this really started out since you've used the sdcard files?
cwm is essential and really needed, especially as the most of chefs doesn't provide DAF ROMs anymore. you want to flash typhoon cm7, right? if nothing is working for you, i'll create a daf version for you, so that you at least can use this ROM. just let me know.
Click to expand...
Click to collapse
Yes, since I tried the SD card CWM (no offense Bro )
You are right, CWM is app you cant live without it if you are an Android lover
I highly appreciate if you can provide DAF version. I only knows how to convert from ZIP to DAF but not the other way round
Many thanks
k, i will create it todays evening ~ 20:00 gmt+1; but first, pls try to test the other tipps (6M for adding "some spare blocks" and if nothing helps cLK pls).
i'll pm you if i'm ready ok?
i have to do it tomorrow; today i've painted the livingroom of a friend and didn't go home. that's ok? or is there sth new on your side? did you test cLK?
greetings
seadersn said:
i have to do it tomorrow; today i've painted the livingroom of a friend and didn't go home. that's ok? or is there sth new on your side? did you test cLK?
greetings
Click to expand...
Click to collapse
No need to push yourself mate I am patient enough to learn
For installing cLK, I will do it later because I have to learn it since I am not familiar with it (or else if you have or know tutorial for newbie, i would go for it)
I will start with flashing with Recovery with 150MB layout provided by Raider x. Currently I am using Winmo with HSPL 4.
Here is what I will do:
1. Turn of the phone.
2. Go into bootloader mode
3. Task 29
4. Flashing HSPL 2.08
5. Flashing MAGLDR 1.13
6. Flashing CWM 150MB via USB Flasher in MAGLDR menu no.5
7. Boot into Recovery Mode via MGLDR menu no.8
This is the point where i got the problem. If it works, then I can go into Recovery mode to install ZIP ROM , but if fails then it will say Error: cannot read kernel image and it will bring me back to MAGLDR screen.
EDIT:
After flashing MAGLDR 1.13, the phone reboot and I unplugged the usb cable.
It booted and the screen says:
"Booting Android from SD
Android load at 11800000
from Micro SD
Load zimage
k: / zimage
ssSD kernel open failed"
then it brought me to MAGLDR screen menu.
I thought it is normal, isnt it?
then I flash CWM using USB flasher via menu no.5
After flashing CWM complete, the phone reboot and again it showed the above screen and finally went back into MAGLDR screen.
Here is the same old problem. In MAGLDR screen, I selected menu no.8 in order to boot the Recovery mode.
But it failed and the screen says:
"LOAD ANDROID RAW
ERROR: ERROR: cannot read kernel image"
So, it happens again.
Before I continue with the next trial, I wanna hear your opinion about that.
BTW, the winmo before I started this, is ENERGY ROM.
PC I used is WIN XP SP2.
Battery is full, SIM CArd was in but Micro SD was removed.
Do you think I miss something?
Thanks in advance
Combining a DAF rom with CWM
This assumes you have magldr 1.13. if you have an older version, backup your rom data, and flash magldr 1.13 first.
A few times there have been posts asking about applying clockworkmod whilst keeping using a DAF rom.
Here's how.
Image 1 - Top left DAF rom folder contents, top right CWM folder contents, bottom middle, combined contents to a new folder.
Copy only system.img and boot.img from the DAF rom folder, and ALL files from the CWM folder, combine into a new folder as per image 1.
In the new combined folder, find flash.cfg, open it in notepad.
(open notepad and drag the file into the empty window)
Edit the boot and system lines to include the filename, and adjust the size of the system line so that it is bigger than system.img
Image 2 - Top left DAF flash.cfg, top right CWM flash.cfg, bottom middle, combined flash.cfg which started out as the CWM flash.cfg and now references the two extra .img files, system.img and boot.img, plus the size of the system partition has been adjusted to allow system.img to fit.
Save flash.cfg
Boot phone into magldr, USB flashing, run DAF.exe just like normal.
Hey presto, CWM is applied and the DAF rom is installed all in one go.
If you did a backup first using titanium, for example, you should now be able to restore your apps and data without issue, and you should also now be able to boot into CWM from magldr by choosing 8 - AD recovery, and you can now use teh CWM backup and restore feature, plus flash CWM roms.
Note that the 300meg system partition used in this example is just that, and example, simply because i used the original DFT release to test this TUT. You could just as easily use 260meg. So long as it is bigger than the system.img by a meg or two it should be fine.
If you want to change to a smaller rom (or bigger) you would need to flash normal cwm again (not this combined one) using a smaller(bigger) partition layout.
Note that flashing a small rom into a big system partition (example a 130meg cm7 rom into this 300meg system partition) will NOT cause any problems, you would just waste 170meg.
Nice work Sam, the screen shots made it really easy to understand also. I will be the first to hit the thanks button, even though I prefer to use CWM to flash my Adroid ROMs and not DAF.
Now if yo could figure out how to flash cLK and CWM at the sametime that would be awesome.
Thanks,
T-Macgnolia said:
I prefer to use CWM to flash my Adroid ROMs and not DAF.
Click to expand...
Click to collapse
yea, me too, and it does have limited uses, but having seen three or four posts asking how they could (for example) use the cwm backup/restore with a DAF rom, i figured id write it up.
As for cLK, i still havent managed to flash cLK on its own! let alone with anything else, hehe. (my fault, im sure, im not blaming anything else, , user error, for sure)
samsamuel said:
Thanks,
yea, me too, and it does have limited uses, but having seen three or four posts asking how they could (for example) use the cwm backup/restore with a DAF rom, i figured id write it up.
As for cLK, i still havent managed to flash cLK on its own! let alone with anything else, hehe. (my fault, im sure, im not blaming anything else, , user error, for sure)
Click to expand...
Click to collapse
Oh yeah it is a reason why ROM chefs right for "experienced user" above the cLK instructions I am whale to get cLK flashed and get CWM flashed but still have not got a ROM flashed using it as I did not have a cLK compatible ROM at that point. So I Task 29ed and flash MAGLDR and then CWM then Hyperdroid back to my HD2. I downloaded the cLK compatible ROM night before last but before I could reflash CLK and CWM I accidently busted the LCD screen on my laptop
As soon as AI actually get a ROM flashed using CLK and CWM I will add it to my guide.
You beat me to the punch with this one
Nice TUT man, haven't tried it but I've been curious for a while if this could work. Will try!
send partition data failed
I did exactly what was said! I flash CMW recovery, did a SD ext partition, and did what you mentioned.. However as i reach: "Flashing 2 Partition....2 {23E-266} M1" i get the following error:
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (815)
Error Description:
Info: .\RSPL\RSPL.cpp (558)
My flash.cfg is :
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M boot.img
system ya 400M system.img
cache ya 4M
userdata ya|asize|hr allsize
what should i do? Please help asap!
I tried again! I was able to flash the ROM! the phone booted but it gave me directly that my internal memory is almost full notification and many process unexpectedly closed errors! i turned off the phone rebooted but its now stuck on HTC splash screen repeating over and over again without booting into android! Please help!
This is an outdated tutorial. You should pick the rom you want, put it on the SD card, then into magldr, USB flasher, run the "android toolkit" and use it to set whatever partition size you require, reboot,into magldr, option 8 ad recovery, that starts cwm, then choose instal zip from SD - choose zip. Done.
Hi guys,
I have problem on my HTC HD2. I was flashing, formating, booting diffrent roms all night and I see that When I was flashing with CWM (3.0.2.5) "install zip from sdcard" then after I reboot phone, Android cant boot. It seems what kind of rom, in one rom I was seeing HTC on black screen, in MIUI rom i was seeing his logo and waves. I leave out my phone with this freeze on all day and not helped, but battery was been hot (I had plugged batery charger).
BUT
When I was flashing rom with only MAGLDR - USB Flasher then all works great. wtf ?
I trying 3.0.0.5 of CWM and i have the same problem.
I use task29, flashing WEE and again HSPL 2.08, radio 2.15.50.14. Windows mobile work.
What I should do ?
Sorry for my bad English.
hypnosisspl said:
Hi guys,
I have problem on my HTC HD2. I was flashing, formating, booting diffrent roms all night and I see that When I was flashing with CWM (3.0.2.5) "install zip from sdcard" then after I reboot phone, Android cant boot. It seems what kind of rom, in one rom I was seeing HTC on black screen, in MIUI rom i was seeing his logo and waves. I leave out my phone with this freeze on all day and not helped, but battery was been hot (I had plugged batery charger).
BUT
When I was flashing rom with only MAGLDR - USB Flasher then all works great. wtf ?
I trying 3.0.0.5 of CWM and i have the same problem.
I use task29, flashing WEE and again HSPL 2.08, radio 2.15.50.14. Windows mobile work.
What I should do ?
Sorry for my bad English.
Click to expand...
Click to collapse
Hi,
When you use task 29 ,it removes all ROMS,Magldr and CWM.
You need to re-install everything in order.
Please use the guide in my sig...number 2.
Don't forget to install the CWM recovery partition for the ROM you intend to install(just before installing the ROM )
I use task29. Install MAGDLR and next install CWM via USB Flasher.
After that i choose zip in my sdcard - LADY MIUI v.8.1a.
Again not work.
??
hypnosisspl said:
I use task29. Install MAGDLR and next install CWM via USB Flasher.
After that i choose zip in my sdcard - LADY MIUI v.8.1a.
Again not work.
??
Click to expand...
Click to collapse
Are you flashing the correct partitioning? I think you don't!
In every build you ROM Devs are reffering to which sizes the /boot /system and /cache partitions are appropriate for their builds.
So when you flash CWM you will see a file "flash.cfg" edit it with notepad
It should look like this:
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 135M
cache ya 2M
userdata ya|asize|hr allsize
In MIUI builds "boot" should be 8M
System 150M
Cache 44M (just to be sure, i don't know if the Dev links cache to data)
So it should look like this:
Code:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 150M
cache ya 44M
userdata ya|asize|hr allsize
So before you flash a ROM make sure if you have the right partition sizes.
Or
If you are confused download and flash the CWM they provide in the ROM thread..
work !!
Thank you very much !!
Hi guys, Im a noob.
When i tried to install the ROMUpdateUtillity, it was smooth on the front part, but when it start installing, it always 0%, and after that, it pop up a error dialog... I followed every instruction in the ROMUpdateUtility. please help me.
I'm using Window 7
Window Mobile Centre 6.1
Thanks.
Go to Xda Hd2 Nand Development and at the top on the thread there will be a toolkit thread. You can search it in Google too. Toolkit is called HD2 Nand Toolkit by Ksubedi. Download the tool. And flash HSPL 2.08. Then flash Task29. Then flash MagLdr through that tool. You can set the size of the partition of MagLdr in center left.
Hit thnkx if this helped.
Sent from my HTC HD2 using XDA App
i guess u didnt change ur hspl ...change it first to 2.08 befor installing magldr
Thank guys, thank you so much
Omg guys, my HD2 can't load into the MAGLDR113 menu, it stuck at the HTC logo start up screen. it can't load into the phone too...
stucking at the htc screen means that theres a clean nand
did you task29? if yes, try to install magldr again..
follow these steps:
install hspl 4 (2.08 HSPL)
install radio 2.15.50.14 rom
Task29 (clean nand)
install magldr
install cwm
goto cwm (AD Recovery @ magldr menu)
flash rom (install zip from sd card - choose zip from sd card)
have fun
if you need to go manually into magldr menu, keep pressing phone end button while booting.
if this is just too much, just try to use a toolkit (like the nand toolkit or mine (click on banner in my signature )
hope it´ll help a bit.
I still can't figure out how to boot into the MGLDR113 menu, i tried reinstall it and try press the end call button many times when booting up. its not working... omg...
Thanks
Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.
kenex91 said:
Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.
Click to expand...
Click to collapse
well dont say idiot about urself ... no one was born knowing how to install android ... ignorant would be the perfect word ...just kidding
aaa... i installed the COREDRIOD into my phone and everything was fine. But when i restart my phone and boot it up, it stuck at the COREDROID logo. i waited for 15min and it still stuck there.
Do i have to wait longer? or i having a problem here?
have you made the necessary CWR partition for this rom?
nope.. how much should i partition them?
kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
Mostly it will say so in the ROM Thread, or a Readme file in the file you downloaded.
kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....
mutil said:
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....
Click to expand...
Click to collapse
i don't have DAF in the 300MB CoreDroid zip file, but i have it in the MAGLDR113. is that the same? or i have find CoreDroid DAF?, I read the forum of CoreDroid again and again. There is no DAF.exe file to download.
Please help me
Thank you.
is this the DAF? I don't understand them at all...
What is in the required NAND Partition (flash.cfg)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize
in the first page of nand development there is hd2 nand toolkit by ksubedi. i use it. it has many tools. better download it. on left there is mgldr repartition choose 300 MB and at cache part write 5, then connect your phone to pc choose usb flasher....
or use this attached folder.
Its still not working. Still having the same problem.
This are the steps i have done.
-install hspl 4 (2.08 HSPL)
-install radio 2.15.50.14 rom
-Task29 (clean nand)
-install magldr113
-Go to USB FLASHER
-Repartition using Toolkit (300MB, 5mb Cache)
-flash rom (install CoreDroid from SDcard in zip format)
Stuck at the CoreDroid Logo Start up Screen.
Did i miss out anything to be done?
Please help me out.
Thank you.
if you use eu-hd2 this rom and many others need an ext partition in sd card. do you have an ext partition?