ok, i really really need help. i have a mytouch 3g 32a.
i installed the spl 1.33.2005
radio 2.22
now, my phone reads it as a 32b now.
and i cant boot any rom. it would pass the green boot then it just turns black with a backlight still on. please, i really need my phone. can u guys help me to get my phone back? like, back to the spl 1.33.00.13? or any other things that would help it work? thanks
Can you get into fastboot (back+power) or recovery (home+power)? Do you have the headphone jack on top?
Related
I installed the hero rom on to my magic and the phone is now stuck on the hero boot screen. My magic is a 32B Google but when I boot into fastboot it now only says 32B H. How do I fix this. I really have to fix this. Help please.
I think you flashed the wrong spl
t
I fixed it. I reformated the sd card and reflashed It. Works perfectly.
Before you read, if you can't help, don't post criticizing.
I am fairly new at all of this and understand that this is purely my fault and I did something wrong. Before I call my phone a brick (which, by definition it is not) I thought I would see if anyone had any ideas on how to fix it.
I tried preparing my system to be able to use SuperEclair. I flashed my Radio to 6.35.10.18 and my SPL to 1.76.2007. I then put Amon_RA's recovery (1.6.2) for the 32A board. I boot up my phone and try to put it into Recovery Mode, doesn't work.
I then try to start anew, and reload the sappimg.zip using my gold card. It hangs on Radio2.
I then go to fastboot mode and try to redo the radio there, along with re-flashing the SPL and recovery. The radio goes through the whole process, but at the end of it, it hangs as the red bar reaches the top.
Basically I am stuck on Radio 6.35.10.18 and I cannot access recovery.
My phone is a Magic1.2/MyTouch3G w/ 3.5mm jack.
Basically:
Sapphire Unknown 32A ENG S-OFF H
HBOOT-1.33.2010
CPLD-13
RADIO-6.35.10.18
I can access fastboot (Power+Back) and Hboot (Power+Volume down) modes. I cannot access recovery (Power+Home). It hangs on the first splashscreen that says "HTC Magic".
I have read things about using Nandroid, but I have no experience with this. If you have an answer, but no time, just reference it and I can do my own research. Any help is appreciated.
Mod edit: not dev related, moved to general
gl
Hello. There is a new AmonRA recovery. 1.7.0. I think what you did was make a mistake at what recovery you installed on there. Do you have a T-Mobile branded MyTouch3G?
I have one of those with a 32A boards. However mine says "G".
What AmonRA Recovery did you use? (G or H)
T-Mobile branded MyTouch.
I used the H version of the recovery.
Let me try using the H version of 1.7.0.
I have a T-Mobile MT3G. Mine is a "G" try using that one.
Did G work?
Everything is fixed. I suppose I was using both the wrong release and/or the wrong version.
Thank you very much.
A mod can now close this thread.
Today i wanted to root my new htc magic 32b. I used unlockers goldcard method to root my phone. This stage i made was successfull, but when i boot to fastboot mode ther was sapphire pvt 32b eng s-off h, radio 3.22.2.17 and spl 1.33.2010. So i flashed mytouch radio 2.22.23.02, when the phone rebooted i couldnt boot in to fastboot mode or recovery. No mather what i press the phone stucks at HTC MAGIC screen. So is it bricked or is there any way to fix this?
Sorry for my english.
Sent from my Htcclay's SuperBad 3G using XDA App
Bricked, and btw why did you flash that radio because the radio you had was fine....
TheForgotten said:
Bricked, and btw why did you flash that radio because the radio you had was fine....
Click to expand...
Click to collapse
no, he had to switch the radio back to 2.x, a 3.x radio is for the 32A
have you tried to get into hboot mode (vol-down+power)? if that works you can flash sappimg from the goldcard again which will put the 3.22.2.17 radio back on, then you can try again
Yes i flashed that radio because 3.22 radio is for 32A.
No i can't get in hboot mode. This is the screen where the phone stucks. View attachment 353338
So is it bricked or what????????
dekkyy said:
So is it bricked or what????????
Click to expand...
Click to collapse
Yes it is you have a very expensive paper weight sad face
Well I Have The Mytouch 3G 1.2
And I Accedently Flashed The Wrong
Radio. And Now I Can't Downgrade it Back
Does Anyone Have Any Clue On What I Can Do?
I Can't Go Into Recovery
I Can Only Do Fastboot And Hboot
When I Flash Another sappIMG.zip
It Will Freeze At Like 99% On The Radio V2 Part
I Have The Engineering SPL If That Helps
Any Help Is Really Appreciated!!!
Hey
Did you solve the radio problem?? i have the same issue. ive searched everywhere but still cant find a solution.
Erickomen27 said:
Well I Have The Mytouch 3G 1.2
And I Accedently Flashed The Wrong
Radio. And Now I Can't Downgrade it Back
Does Anyone Have Any Clue On What I Can Do?
I Can't Go Into Recovery
I Can Only Do Fastboot And Hboot
When I Flash Another sappIMG.zip
It Will Freeze At Like 99% On The Radio V2 Part
I Have The Engineering SPL If That Helps
Any Help Is Really Appreciated!!!
Click to expand...
Click to collapse
Go into fastboot and write here first 5 rows info:
Sapphire pvt 32A blah-blah-blah... (all symbols are important !)
well im a noob to the mytouch3g but i own a slide....the prom im haveing is a friend game me his 3g cuz it was stuck at mytouch splash and well i cant get it past that
specs are
sapphire pvt 32a ship son g
hboot-1.33.0013
cpld-13
radio-6.35.10.18
so can any1 help....i can get to fastboot and hboot just not past that
He hosed the radio. The 6.35.10.18 radio is for actual 32A devices. Read through this post and the light will come on. You may be able to get the radio changed back by following the instructions in this post.
well i have tryed that sapp b4 just get to Radio V2 and sits there updating for last time i try till it went dead...i can get to fastboot hboot but not recovery
well tryed again lastnite and well sat at updateing Radio_V2 at like 90 percent for 3 hours......WHAT AM I TO DO?
Can you still get into recovery? With the phone off, turn it on holding home+power.
that takes me to the splash screen tryed.. im gonna try now that i have sd drive to use the gold card
well that didnt work hung up at thr radio_v2
Well if you can borrow a friends phone to make a goldcard, then just follow the old school guide in my sig. Hopefully it wont fail writing the radio which is what I'm thinking will happen.
Sent from my T-Mobile myTouch 3G using Tapatalk
i made the gold crad from my slide and well same thing gets stuck at thr RADIO_V2....then i pulled the bat and now have soff and tryed flashing radio through fastboot and the same thing get 90percent dont and hangs there
What radio did you try flashing? Either way, your going to have to flash a proper Engineering SPL that'll work with that radio, then flash the new radio, then the correct SPL. What are you showing in fastboot now?
sapphire unknowen 32a eng s0ff h
hoot 1.33.2010
cpld-13
radio-6.35.10.18
Alright, that one should be good. Where did you get the radio image your trying to flash and which radio is it?
ok so now this is what i have now
sapphire pvt 32a eng s0ff h
hboot 1.76.2007
cpld-13
radio-2.22.23.02
if thats right only prob i have now is i cant get into recovery...hold home power takes me to splash screen.....so how far off am i?
You need to get the stock SPL back on there. Flash recovery from fastboot, then flash the correct SPL, and then reboot. BE CAREFUL, if you flash the wrong SPL you may brick your phone. Give me about an hour and I'll link the correct files.
Sent from my T-Mobile myTouch 3G using Tapatalk
THANK YOU......i now have it back to stock had to get the right radio then i used ruu so we are back to stock.....now to root it which why do u recommend......the old or new way?
Download this, put it on the root of your SD card. With the phone booted, download/install "Appinstaller" from the market. Use it to install Universal Androot, then run the app, which will root your phone. Once Universal Androot root's your phone, start at Step #6 from this guide.