Database Users

Airtel Delhi MMS problem

Hi guys,
Is any wizard user in delhi (India) using airtel as service provider?
The problem i'm facing is that i'm not able to send/recieve MMS messages on my O2 mini s.
I've tried contacting airtel people and they just gave me the settings they have in their book, But after various efforts it's not working.
The GPRS and rest of the things like sms, mail etc are working fine.
Here are the settings they gave me
Server Name : Airtel MMS
Gateway : 100.1.201.172
Port : 9201
Server Address : http://100.1.201.171:10021/mmsc
Connect using : GPRS
If anyone is using some other settings or if there is something that i'm missing then please lemme know.
Regards
Vineet

vanny said:
Hi guys,
Is any wizard user in delhi (India) using airtel as service provider?
The problem i'm facing is that i'm not able to send/recieve MMS messages on my O2 mini s.
I've tried contacting airtel people and they just gave me the settings they have in their book, But after various efforts it's not working.
The GPRS and rest of the things like sms, mail etc are working fine.
Here are the settings they gave me
Server Name : Airtel MMS
Gateway : 100.1.201.172
Port : 9201
Server Address : http://100.1.201.171:10021/mmsc
Connect using : GPRS
If anyone is using some other settings or if there is something that i'm missing then please lemme know.
Regards
Vineet
Click to expand...
Click to collapse
Same problem once upon a time.
But I have found that I was able to sucessfully send an MMS at night. I mean very late night or early morning I should say. When I asked the helpdesk, they told me that I happen to be in a network congested area. But then she was kind enough to give a reset on my profile which took me out of the network for a couple of minutes. When I was latched again, viola !!! no problems !!
Try that.!
By the way, what speeds do you get ? I get an excellent speed in Mumbai on Airtel than on Orange. Orange sucks real bad these days.

Hi araje,
Thanks for the reply. I've tried the resetting thing also but it was of no use.
Anyway I've found out the solution to this problem. Actually the GPRS settings that we use, has got the problem. Here's what i did ...
I created a new GPRS connection with the name MMS ( Cellular line (GPRS)).
gave the access point as airtelmms.com
In the advanced tab use "server assigned IP address", and enable the box "Use Ip header compression".
Now comes the real part...... in the servers tab, use "specific server address" and specify DNS as 100.1.201.172 and press OK.
Now to use the MMS part u go to connection settings, connect using this new connection and u'll be able to send and recieve MMS with out any problems.
For browsing and all use the other (ur normal) GPRS connection.
Though switching between connections is a pain in the a** but as i don't use MMS too much, it's ok for once in a while.
Well, Airtel provides EDGE connection in delhi (that's what my phone indicates me :wink: ), but when i use it to download something on my pc it gives me a speed of 4-5 Kbps. Though it is not good to surf on pc (anyway i use broadband at home and work), but is good enough to work on my wizard.
Also i cannot complain about it coz i get it for 99 bucks a month ... so what else could u expect
Vineet

Hey Vineet,
Are you able to connect to Airtel Live ?
From the website here are the settings. I have been able to set some stuff but points 8,9,10-14 are tricky. I tried following your settings you used for mms but didnt help. Any idea how to set this ?
1 Connection Name: Airtel Live!
2 Data Bearer: GPRS
3 Access Point Name: airtelfun.com
4 Username: MSISDN e.g. 91982xx xxxxx
5 Prompt Password: No
6 Password: < blank >
7 Homepage: http://live.airtel.in
8 Connection Security: Off
9 Session Mode: Permanent
In case of the WAP 2.0 complaint phones, the following extra settings need to be done:
Under Options > Advanced Settings
10 Phone IP Address: Automatic
11 Primary name server: 0.0.0.0
12 Second. Name server: 0.0.0.0
13 Proxy server. address: 100.1.200.99
14 Proxy port number: 8080

hey what phone are you using??
i've mentioned the settings for wizard (O2 mini s), iguess others will also have similar settings.... try that and let me know...

I am using Qtek9100 with AKU rom.
The new connection I created was exactly on your lines.
vanny said:
I created a new GPRS connection with the name MMS ( Cellular line (GPRS)).
gave the access point as airtelmms.com
In the advanced tab use "server assigned IP address", and enable the box "Use Ip header compression".
Now comes the real part...... in the servers tab, use "specific server address" and specify DNS as 100.1.201.172 and press OK.
Click to expand...
Click to collapse
I set most of the stuff based on the way you created your connection. But how did you specify the port 9201. In my case I put the server ip mentioned in point13 in the DNS entry. But there isnt anyway to enter the port number.
Are you able to use the airtel live website ? Also one thing is that my Airtel mobile office works perfect since I dont have to enter any advance settings. Just the APN, and no userid/password. However, the airtel live website doesnt load with this connection. I use it mainly for laptop.
Thanks for your help in advance
Anup

Airtel Karnataka MMS settings
Those of us who have approached Airtel for help in configuring MMS on Windows Mobile devices know that their very competent customer service reps are blissfully unaware of the existence of Windows Mobile OS leave alone its variants like WM 5, WM 6 and 6.1. Ans when they direct one to their 'special GPRS helpdesk' the special GPRS guys haven't heard of anything newer than WM 5 because they attempt to walk one through the WM 5 UI.
Well to avoid calling Airtel, activate the MMS service on your account by sending a text message MMS ACTV to 222. Once the service is active, do not ask for MMS settings to be sent over the air as Windows Mobile doesn't accept OTA settings. Instead key-in the settings yourself:
MMS Settings for the Sony Ericssson X1i (Xperia)
Windows Mobile 6.1
1. Tap Start -> Settings
2. On the Settings screen tap on the Connections tab
3. Tap the Connections icon
4. Tap Manage Existing Connections
5. Tap on New to create a new data account
6. Type-in AirtelMMS or MMS under Enter a name for the connection
7. Choose Celular Line (GPRS, 3G) from the drop-down list under Select a modem
8. Tap Next
9. Type-in airtelmms.com under Acess point name
10. Tap Next
11. Leave the username, password and all other fields blank
12. Tap Finish
If there is more than one data connection configured on the Manage Existing Connections page, please ensure that the radio button beside Auto Pick is selected.
Tap OK to exit and tap OK once again to return to the main settings page.
Tap Start -> Messaging
Tap SMS \ MMS
Tap Menu -> MMS Options
Place a check mark beside the following:
• Save sent messages
• Allow delivery Report
• Allow Read report
Set the Retrieval mode to Auto
Set the Attempts before giving up to 3
Tap on Servers
Tap New
Under Server Name enter AirtelMMS or MMS
The Gateway should be set to 100.1.201.172
The Port number should be set to 8799
Enter http://100.1.201.171:10021/mmsc under server address
Under Connect Via, please choose the name of the data account created in step 6 above
Choose 100K as the send limit
And set the WAPVersion to WAP 2.0
Tap Done
Tap OK to return to SMS \ MMS
and bob's your uncle

Help needed on GPRS settings

Sorry - posted this originqlly as wifi and not GPRS
Currently in Andorra about to go to france then spain and trying to get my Wizard to work on GPRS using an easy mobile sim.
The settings are shown on...
https://www.easymobile.com/selfcare/emcontent/cust_services/customer_intro.html#11
as....
GPRS
Account name – eM GPRS
Homepage – http://wap.easyMobile.com
User name – leave empty
Password – leave empty
Access point settings
Proxy – Enable
Proxy address - 149.254.201.135
Proxy port – 8080
Data bearer – GPRS
Bearer settings
GPRS access point – data.uk
Authentication type – Normal
User name – user
Password - one2one
And I could not get it to match the setup on my device.
The only place I could see a port setting for a proxy was on the modem set up.
Can anyone show how these should be arranged in the format shown in the spec of my phone shown below (UK Tmobile)
Thanks in advance
I tried easymobile customerservices from france and they told me to call the local french company (which flicks between bouygtel and orangefrance with sfr banned) but i dont speak french and there is nothing about it on either of their sites - i am now in andorra - but the internet cafe i am in has no java enabled so I cannot try for better luck on the easymobile CS chat help page.
I guess the asking the local co is **** as my tmobile settings were working when i got here without change but i had never set my phone up for easymobile before I left - but i guess it is those settings that would work and the CS person had less of a clue than me!
My Tmobile sim is still in france - and i guess i will have buggered the settings to get Tmobile roaming too as I tried so many things - so even more in a hole.
HELP PLEASE!!!!!!!!

back in frqnce and back to **** keyboards
azertyuiop
qsdfghjklm
wxcvbn
the messqge from the mobile issomething like...
"no modem found at that number"

MTNL - India, Gprs problem with settings

Hi..
I am trying to connect my HTC WM6.5 based phone to internet via gprs. I have a MTNL connection in Delhi. I have installed these settings.
Following Settings are under Modem settings. :
Connection name : MTNL GPRS
Access Point Name : gprsmtnldel
And Following settings under proxy -> wap proxy settings
Wap Server : 172.16.31.10
Port : 9201
Username : mtnl
Password : mtnl123
But cannot connect to the net. The phone tries for a while then shows "Could not connect due to unknown reasom"
Than I check for settings again, the password I entered had automatically changed to a 12 letter word.
Please help me configuring windows mobile.

try removing the proxy settings.
only use > manage existing connections > name should be mtnl
modem type cellular line
Access Pint name as per your service
username & password
that should help

go to coonection -->gprs authantication-->select mtnl connection name
and select authantication type as PAP

I'll tell you by tomorrow, I had it working successfully before my last hard reset.

Settings
Start-settings-connections-my isp-Select name-below select cellular gprs-apn...-username password - click finish then go to edit my proxy check boxes & click advanced tab enter ip in http & port number 8080 then wap enter ip port number as 9201 then click ok thats it Enjoy

Dear Ankush........were you able to get any settings? As I am still unable to .. and i have tried as other people have mentioned but nothing is of use ... Pls help if you have finally overcome this problem.
thanks....
ankush1492 said:
Hi..
I am trying to connect my HTC WM6.5 based phone to internet via gprs. I have a MTNL connection in Delhi. I have installed these settings.
Following Settings are under Modem settings. :
Connection name : MTNL GPRS
Access Point Name : gprsmtnldel
And Following settings under proxy -> wap proxy settings
Wap Server : 172.16.31.10
Port : 9201
Username : mtnl
Password : mtnl123
But cannot connect to the net. The phone tries for a while then shows "Could not connect due to unknown reasom"
Than I check for settings again, the password I entered had automatically changed to a 12 letter word.
Please help me configuring windows mobile.
Click to expand...
Click to collapse

still same even converted my number to 3g.....still my password converts into 12 letter string....wtf

y ont u let the fone do an automatic configuration?
i have a htc touch pro2 (wm 6.5) it sonfigures my airtel gprs automatically, & i even have an idea sim, so whn i remove my airtel n put idea in it,even tht it configures automatically,

by the way it wuld be better if mr ankush tell which wm device he uses & which rom he has installed

Hi Ankush,
Send me your mobile number and your Phone model number and I will send you the MTNL settings over the internet like the MTNL service centre would do. Send me this info in PM.
Kailash

mtnl mumbai 3G
hi guys
am in mumbai.. using mtnl 3G(prepaid) perfectly on my Touch HD.(energy rom)
the settings r simple.
here is the process.
1. go in settings/connections/connections (custom rom so some shortcuts might be different)
2. advanced tab.
select networks
both boxes select MTNL GPRS. if it doesnt show that in drop box then we first make those settings then u select. ok ok and out..
3. tasks tab
should show u MTNL GPRS.(if step 2 worked)
manage existing connections
general tab - name - MTNL GPRS
modem tab - MTNL GPRS -
name MTNL GPRS
modem - cellular line(GPRS, 3G)
next
access point name
gprsppsmum ----- this is for prepaid
gprsmtnlmum ----- this i guess is for postpaid.
next
usename - mtnl
password - mtnl123
finish
vpn tab ---- blank
proxy settings tab
tick mark -- this network connects to the internet
dont tick mark -- this network uses a proxy server to connect to the internet
so no proxy settings
soft reset and now try using the internet
it works like a charm.
this settings r for mumbai.
for delhi u can try apn as gprsppsdel or gprsmtnldel
hope this helps.
and yes.. MMS STILL DOESNT WORK. have tried all tricks but nothing. connects but after 98% it gives error. customer care is useless.

ankush1492 said:
still same even converted my number to 3g.....still my password converts into 12 letter string....wtf
Click to expand...
Click to collapse
dont worry about the password string. its normal
change apn
prepaid gprsppsdel or gprsppsmum
postpaid gprsmtnldel or gprsmtnlmum
no proxy settings.
hope this helps.

MTNL Delhi prepaid GPRS setting works on HD2 like Charm
ruzan said:
hi guys
am in mumbai.. using mtnl 3G(prepaid) perfectly on my Touch HD.(energy rom)
the settings r simple.
here is the process.
1. go in settings/connections/connections (custom rom so some shortcuts might be different)
2. advanced tab.
select networks
both boxes select MTNL GPRS. if it doesnt show that in drop box then we first make those settings then u select. ok ok and out..
3. tasks tab
should show u MTNL GPRS.(if step 2 worked)
manage existing connections
general tab - name - MTNL GPRS
modem tab - MTNL GPRS -
name MTNL GPRS
modem - cellular line(GPRS, 3G)
next
access point name
gprsppsmum ----- this is for prepaid
gprsmtnlmum ----- this i guess is for postpaid.
next
usename - mtnl
password - mtnl123
finish
vpn tab ---- blank
proxy settings tab
tick mark -- this network connects to the internet
dont tick mark -- this network uses a proxy server to connect to the internet
so no proxy settings
soft reset and now try using the internet
it works like a charm.
this settings r for mumbai.
for delhi u can try apn as gprsppsdel or gprsmtnldel
hope this helps.
and yes.. MMS STILL DOESNT WORK. have tried all tricks but nothing. connects but after 98% it gives error. customer care is useless.
Click to expand...
Click to collapse
Finally, my toiling ends with this setting given above. Thanks you so much!!! I have been trying one setting after another but it never works until I stumbled upon this thread and tried on
for Delhi prepaid user (trump), for apn, enter gprsppsdel
The rest follow the instruction given by this charming person!
Excelllent!!!!!!!!!!!!and great!!!!!!!!!!!

mkamodang said:
Finally, my toiling ends with this setting given above. Thanks you so much!!! I have been trying one setting after another but it never works until I stumbled upon this thread and tried on
for Delhi prepaid user (trump), for apn, enter gprsppsdel
The rest follow the instruction given by this charming person!
Excelllent!!!!!!!!!!!!and great!!!!!!!!!!!
Click to expand...
Click to collapse
u welcome...
i went mad myself when i first started out with mtnl. cust care sucks big time..
when saw that people were searching for settings and since mine was working perfectly..
posted it.

ruzan said:
hi guys
am in mumbai.. using mtnl 3G(prepaid) perfectly on my Touch HD.(energy rom)
the settings r simple.
here is the process.
1. go in settings/connections/connections (custom rom so some shortcuts might be different)
2. advanced tab.
select networks
both boxes select MTNL GPRS. if it doesnt show that in drop box then we first make those settings then u select. ok ok and out..
3. tasks tab
should show u MTNL GPRS.(if step 2 worked)
manage existing connections
general tab - name - MTNL GPRS
modem tab - MTNL GPRS -
name MTNL GPRS
modem - cellular line(GPRS, 3G)
next
access point name
gprsppsmum ----- this is for prepaid
gprsmtnlmum ----- this i guess is for postpaid.
next
usename - mtnl
password - mtnl123
finish
vpn tab ---- blank
proxy settings tab
tick mark -- this network connects to the internet
dont tick mark -- this network uses a proxy server to connect to the internet
so no proxy settings
soft reset and now try using the internet
it works like a charm.
this settings r for mumbai.
for delhi u can try apn as gprsppsdel or gprsmtnldel
hope this helps.
and yes.. MMS STILL DOESNT WORK. have tried all tricks but nothing. connects but after 98% it gives error. customer care is useless.
Click to expand...
Click to collapse
Hi, Thanks alot for the setting you provided! I did the setting for delhi mtnl prepaid and it works like a charm I followed exactly as you mentioned and changed mum to del and used (gprsppsdel) not (gprsmtnldel)..
But there is no 3G connectivity. In the cellular network (on my HTC HD2), I could find only MTNL GPRS (there is no option to choose 3g). Anyways, I am atleast happy with the gprs connectivity as I can update my mail box and weather report. Thanks alot....

Hi Ruzan, you should make your setting available outside this forum (I dont know how...) but I see lots of people desperately looking for it....Day before yesterday I changed flashed my rom, and I google search for two days, and finally I stumbled upon your setting today and to my surprise, it was your post that help me earlier too...Thanks again

mkamodang said:
Hi, Thanks alot for the setting you provided! I did the setting for delhi mtnl prepaid and it works like a charm I followed exactly as you mentioned and changed mum to del and used (gprsppsdel) not (gprsmtnldel)..
But there is no 3G connectivity. In the cellular network (on my HTC HD2), I could find only MTNL GPRS (there is no option to choose 3g). Anyways, I am atleast happy with the gprs connectivity as I can update my mail box and weather report. Thanks alot....
Click to expand...
Click to collapse
U welcome.
which Rom did u flash? on Energy's Rom to select 3G, go to comm manager/3G or network and select WCDMA. thats 3G network. if u r getting H or 3G on task bar u r connected to 3G network.
enjoy.

ALL MTNL APN are changed to mtnl.net
That means post paid and prepaid or Mumbai or Delhi has one APN that is mtnl.net
---------- Post added at 10:46 AM ---------- Previous post was at 10:46 AM ----------
ALL MTNL APN are changed to mtnl.net
That means post paid and prepaid or Mumbai or Delhi has one APN that is mtnl.net

No internet after upgrade!

Hi everyone,
I flashed him a root version of: Eclair. XWJM1
but now I have no internet in my bar at the top of the screen (no 3G, HSDPA) I can only do things via WiFi now ..
Who can help me urgently?!?!
thnx

Settings - Wireless & Network - Mobile Networks - Access Point Names
You probably need to create a new APN in there for your network

wolf_man said:
Settings - Wireless & Network - Mobile Networks - Access Point Names
You probably need to create a new APN in there for your network
Click to expand...
Click to collapse
Some cases only choose one - so good luck those APN settings can you typically find at you Telefon service provider .

[Q] wap settings (Loop/BPL mobile ) for HTC Wildfire

hi,
pls help me with wap settings (Loop/BPL mobile ) for HTC Wildfire(android).
although wap works on my nokia, doesnt do so in wildfire.
when contacted tech support-BPL/Loop,the said that 'Loop wap' is incompatible with wildfire. must choose a gprs plan(read- a more costlier plan).
after reading other posts, found tech support is poor for windows/android.
pls advise.

deepesh_a said:
hi,
pls help me with wap settings (Loop/BPL mobile ) for HTC Wildfire(android).
although wap works on my nokia, doesnt do so in wildfire.
when contacted tech support-BPL/Loop,the said that 'Loop wap' is incompatible with wildfire. must choose a gprs plan(read- a more costlier plan).
after reading other posts, found tech support is poor for windows/android.
pls advise.
Click to expand...
Click to collapse
go to connection wizard (start > settings > connection > Connections )
1.click add new modem connection
-----------------------------------
name for connection : n e thing u like
select a modem : Cellular Line(GPRS).
click next
Access point name : mizone
click next
username : ur loop number
password : leave it blank (or ur loop number)
domain : leave it blank
click FINISH
NOW....
2.Click "Edit My Proxy Server"
under proxy settings TAB....
check both the boxes...
and under proxy server box add : 10.0.0.10
and click advanced button
under all four protocols HTTP , WAP , Secure WAP,Socks add following ip address with port no.
IP address :10.0.0.10
port no : 9401
click ok n u done......
now click on Manage existing connection
ur newly created connection will be there....
click and hold connection name...context menu will appear....click on connect
if it disconnects.....try few more times...it will get connected