Hi,
I would just like to know whether anyone has successfully accessed their corporate LAN using LEAP authentication?
Mine just can't work, no matter what I tried. I am able to access normal hotspots and my home LAN with normal WEP secruity.
Nobody using LEAP at the moment?
I've not got LEAP running on any of my wireless networks, either home or work, however, you may struggle to get it working, given that LEAP is cisco-propriatary and as such, not very many wireless drivers support it. My old Axim x50v had a plugin that supported leap, but I've seen no evidence of this on the Ameo. There may be a commerical plugin available for WM5, but I'm not sure.?
Personally, if you have a choice, Id avoid LEAP following all the flaws found with it, but I guess sometimes we have to live with what we're given.
Yes, I am living with what I am given, because my company is using LEAP for its wireless network authentication.
I'm not sure whether it is the access router that is giving me problems, or WM5 implementation of LEAP was somehow broken. My Qtek 9000 on AKU 2.x was able to log into the network but not the U1000, which I believe has AKU 3.x
Does anyone know of any tool that I can use to help me debug the problem? Like some kind of a trace?
Thought I'd share this in case anyone has problem using LEAP to log into their corporate wireless LAN.
I couldn't accept that my Qtek 9000 can log onto my corporate's wireless but the U1000 can't. Until it struck me that I should do a comparision of the registry between these two. So I fired up my registry explorer and search for "leap" and sure enough there was a difference!
In the U1000, there is this additonal entry "HKLM\\Comm\TIACXWLN1\Parms\HTCPreloadLEAP" that was not present in the Qtek 9000. I noticed this key was set to value 0. Naturally I amended it to value 1, soft reset and tried to log-on. You can imagine my delight afterwards
So now my U1000 is almost the complete PDA solution I have been looking for, barring that PI2005 issue.
As a reminder, if you want to try this fix, do remember to back up your registry first.
Hi chrisoyh, I am sooooo grateful that you enlightened me on this one. Was trying to connect to my corporate LEAP network since I got my phone. Thank you! then I tested this "fix" and could not find anything new in the WiFi. In the original HTC ROM I had there was a LEAP setting that never worked. Now in the WM6 ROM I am using there is no LEAP tab. anyone?
OK - I managed to enable the LEAP tab. Now I'm wondering if you could help me with this. In HKLM\\Comm\EAP\Extension I have keys 13 (EAP-TLS - Smart Card or Certificate) 25 (PEAP) and 26 (EAP CHAP - MSV2 Challenge). I believe that there should be a LEAP key here. Can you possibly have a look and tell me if you have one what are the settings - please? Thanks very much.
Hi nealed,
Sorry but nope. There is no LEAP key under HKLM\Comm\EAP\Extension on my U1000 as well.
What are the settings you set for your WEP key under your wireless profile? Is it "Shared" or "Open"?
Hi chrisoyh,
WiFi Settings: Authentication: Open, Data encryption: WEP, The Key is provided automatically, Then I click Next and on Configure Network Authentication I tick Use IEEE 802.1x network access control - but do not have LEAP in EAP in the drop down box.
Wireless LAN settings : SSID: (the ssid I connect to) - User Name: my domain user name Password: my password Domain fqdn of the domain. authentication Type: Open System.
Just a question - should I be creating the connection in WiFi after setting up the Wireless LAN?
Do you have a LEAP dll anywhere on your machine? Other LEAP registry entries? I'm guessing there must be something missing!
Your Wireless LAN settings is similiar to mine.
As for the WiFi Settings: try using Shared instead of Open authentication. And select PEAP for the "Use IEEE 802.1x network access control".
Let's see whether this helps.
PEAP is Protected Extensible Authentication Protocol. I need to use LEAP (Lightweight) Extensible Authentication Protocol. Also, the authenticaltion is 802.1x open. The above won't work for me. I believe that there is a dll missing which will enable the selection of LEAP under EAP type drop down list. anyone?
Yes, I know the difference between LEAP and PEAP. But that is how it was exactly set up on my Dopod U1000 and old Qtek 9000, and both are able to access my corporate LAN.
There is no LEAP DLL file, trust me.
Also, the Open authentication is set in the LEAP tab under "Wireless LAN" setting. In WiFi tab, I find that using "Shared" authentication is the way to go for me to get connected.
This is not exactly related to the post but maybe you can help me. I am having stupid problems with wifi on th htc. If I use resco explorer to surf by wifi in my home network I see only works if the phone is not connected and previously I made a soft reset. Exactly what happens is I can see previous shared networks folders but If I look in the option "map network" I cannot find other computers.
The other consequence of this is I am having stupid problems with Jet printing because not ever the pda see the network.
Previously I had a jasjar and never troubles with this. I am not happy how is managed in the htc.
Dear All,
Need some help connecting my HTC Diamond to my work WiFI Network. Have tried the previous recommendations in this thread but still no joy.
I have the following:
HTC Touch Diamond P3700
Windows Mobile 6.1 Professional CE OS 5.2.20764 (Build 20764.1.4.3)
Configure Wireless Network:
Authentication: Open
Data Encryption: WEP
The key is automatically provided IS ticked
Use IEEE 802.1x network access control IS ticked
EAP type: PEAP
LEAP tab:
SSID: set to WiFI SSID
Domain: blank
User Name: Set
Password: Set
Authentication Type: Open System
I have tried Shared as previously recommended but no difference.
Please Help.
Thank you
Hi,
I am tempted to load a Cyanogen on my Magic to get benefits from Donuts at work.
In fact, work wifi network is based on WPA2 Enterprise wifi for the network and ntml proxy for internet.
I used Wifi Helper in order to configure a WPA2 access. Networks gives me an IP adress but I think there is a certificate that I don't have on my Magic. Perhaps Donuts' certicate storage will help. I hope so
My question is "does Donuts allow the use of an authentified proxy?"
I tried:
inserting proxy setting in database in Sqllite
using proxysetting from google project which in fact does not work with authentification and looks not to be maintained
using anycut but it says "error in the format of proxy adress" when you try to introduce user and password.
Donuts introduce WPA2, VPN. I hope that it allow authentified proxy. Is it just hope?
Thanks by advance for your attention and your help
Am I the only one with this problem?
Guys, I'm very new to android since I got legend yesterday and I couldn't find a way to modify dns settings. Since, with shame, in my country, some websites are restricted due to taxing problems, (etc, youtube ) and I should modify my dns settings. I couldn't find and I'm slightly losing my temper...
There're some solutions on net but i really couldn't understand what they are talking about. I need an explaination as "android for dummies". Any help appreciated.
settings>setup>wireless&network>wifi-settings
push the bottom "menu" and choice "advanced"
here you can setup ip and dns
roberto
Sent from my HTC Legend using the XDA mobile application powered by Tapatalk
Thank you rcravero but this only solves my problem when usin wlan connection. I want to change dns settings for my 3g connections. I have a good data plan and i want to use it. Thank u anyway...
Dear seniors
NEED YOUR HELP AS SOON AS POSSIBLE….
I’m wondering if there is away or application to setup WAP on windows phone 7, because I’m not capable to add proxy and port setting as I can in ANDROID and windows mobile 6.5…
Thx in advance
Best regards MOIISSE
If you have one of the Custom WP7 roms out there (not the original DFT_70 thing) open up the marketplace and under HTC apps, there should be Connection Setup. Download that.
It should automatically detect your APN and configure it for you, if not manually select your APN and you should be good.
Thanks for your quick reply
I tried connection setup, and I did choose my carrier connection setting, but I wasn’t capable to browse into my explorer.
Cause I need to configure manually the proxy and the port in WAP setting.
NB: that’s what I did in the last android ROM I installed on my beloved HD2
Hope you can tell me about a way to add the proxy in the APN
Thx in advance Mr ceo4eva
Best regards moiisse
Thanks for your quick reply
I tried connection setup, and I did choose my carrier connection setting, but I wasn’t capable to browse into my explorer.
Cause I need to configure manually the proxy and the port in WAP setting.
NB: that’s what I did in the last android ROM I installed on my beloved HD2
Hope you can tell me about a way to add the proxy in the APN
Thx in advance Mr ceo4eva
Best regards moiisse
Same as Moiisse
you can see the wap or APN selection tag from the selection menu in (connection setup)
but,in fact you can't change or edit the proxies or ports as they are hidden.
therefore,the question is how the setup is reading and what it reads' from the network (proxies,ports,passwords,etc...we can't access these information.(as w 6.5 or Android phones)
is HD7 a 3G phone only....?!?!?
tnx moisse for this issue...and i hope someone can solve it!! registry code or something to unhidden these infos.
BR
jianototi said:
you can see the wap or APN selection tag from the selection menu in (connection setup)
but,in fact you can't change or edit the proxies or ports as they are hidden.
therefore,the question is how the setup is reading and what it reads' from the network (proxies,ports,passwords,etc...we can't access these information.(as w 6.5 or Android phones)
is HD7 a 3G phone only....?!?!?
tnx moisse for this issue...and i hope someone can solve it!! registry code or something to unhidden these infos.
BR
Click to expand...
Click to collapse
mr jianototi
i was reading about registry tweak editing,
it seems a lot of registry was done and enabled a lot of hidden features
so i'm wondering is there is a registry tweak that enable to add in
setting --> cellular--> edit APN
2 case for proxy and port for wap setting....
best regards moiisse
hi sir
85 views without any help....
need help dear cheafs...
Hello all,
I am facing a weird problem. I cannot connect to my carriers APN when using the USER and PASSWORD fields.
If I setup another APN for the same carrier that does not need a USER and PASSWORD specification, it connects fine.
Does anybody know what could be happening?
I am typing the correct USER and PASSWORD because I tested it on another Android device and it works.
Any help would be appreciated.
Thanks