HD2 Freezes When Screen Turns Off With Bluetooth Off - HD2 General

Hi all,
I'm getting a very wierd error that started the other day when I was using the radio on Darkstone's SuperRAM Android build (not the NAND version). When turning on the radio in this build it automatically turns bluetooth on, after I was finished using it I switched off (and disabled bluetooth).
Ever since, if I try to use the phone with bluetooth off and the screen goes in to sleep mode, the phone freezes up completely (hardware button lights don't turn on either); I have to either use the hard reset button or pull the battery to get the phone to turn back on.
The wierd thing is, if I have bluetooth switched on, it works fine (but drains the battery a lot faster than normal). It is also not just related to android, I tried it in the windows mobile rom I was running (OzDroid) and have even converted over to Magldr and a NAND edition of Android and still get the same problem...
Any ideas!?

Same problem here.
I know that I used Pocket Mechanic to repair my registry and after that it started to happen. Hard reset and the problem still persists.
Update
Problem solved!!! It was SpriteBackup Restore Settings:
http://forum.xda-developers.com/showthread.php?p=11707274#post11707274

Related

Wizard wont turn on - however lights still flash?????

Im currently using the imate rom 2.16.9.1.wwe Rom date 2/6/06 extrom version 0 2.16.9.101
It has been working fine for the past few weeks and the performane increase has been much better. I was also using the oush mail which also worked well. Then a few days ago I started to have a few problems with the phone, basically it would look as if it was working the lights flashing, however when I went to turn it on it wouldn’t turn on. The only way to resolve this si to soft reset the handset. This problem is now occuring on average 2 times a day! I havent even installed any new software!! Thwe only major incident before this started happening was I used skype twice! But havent used it since! I have also stopped push mail cause I thought this maybe the issue but it didn’t solve it!
Its so annoying cause I think the device is operating normally cause I see the flashing lights however it cant do anything cause it has frozen!
Any ideas???
I was thinking of going for a hard reset but if I restore my backup ive taken with spb will this not just reintroduce the problem?
just to add for further info i have no apps running and the
program memory is total - 44.01mb
in use 19.67mb and Free 24.34
thats after a soft reboot!!
This might be a really silly suggestion, so appologies if it is, but could it be just the backlight turned off for some reason so it looks like the device is off when it is actually on?
No, I don't think that it is the backlight as I am also now experiencing this same problem ... approx 1 - 2 time daily. You think that the phone is functioning until you try to use it. Only option is soft reset.
Any help on this would be appreciated.
no at present a soft reset is the only cure and even then it may occur again later on! Bluey HK are you using the same rom as me??? the imate one?
its done it twice already today and its only midday! the last time i was just browsing the web, closed the browser, then switched it off and then couldnt turn it back on! Do you think it may be a memory leakage issue????
This happened to me yesterday on my T-Mobile MDA. I am running the latest T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US image from xelencin.
What appears to have triggered the problem for me was attempting to connect to T-Mobile's My Email app to download mailbox settings while the signal level is too low or intermittent (Wi-fi and Bluetooth were disabled).
The backlight would not turn on and I could observe the My Email app trying to access the server.
it sounds as though it may be a bug connected with a GPRS connection???
ahh its done it again, this time i wasnt doing anything just died! I think i am gonnna have to do a hard reset cause this is making the phone unuseable!
if i do a hard reset and then install a back up is there a high possibility that this will reintroduce the bug???
its not the backlight
my 8125 is having the same damn problem. its nto a backlight issue, as it just stalls, and the past 4 times its done it, i've just removed the battery and turned it back on as a soft reset wont work, and i can't it to react to any commands. this is either a software issue all our phones are dying. i was having this problem with summitter's previous 2.17 rom, then updated to the recent 2.17.11 aku 2.2 rom... thinking the upgraded rom is what it needed...NOPE... still crashed. almost all instances i believe are when the wifi connection was active. but i could be making that up, i'm positive on 3 occasions it was with a wifi connection active. but not too sure about the 4th.
this is making me insane, and we need to figure out whats up~!
to expound on the problem:
one time i was in the middle of checking voicemail, then tried to delete, but the screen wouldn't light up, and it wasn't responding to my option 7 to delete command. the other time was in the middle of a phone call. something's up....
i am having the same issue with my 9100, its running the latest offical rom, mine does it whenever it feels i dont believe it is wifi or gprs related as i have the problem at time when i have been using neither.
there does not appear to be a link to any software i am using either
any ideas?.
yea- i get the same sometimes, i go to take my phone out of standby and it wont do anything, the power button doesnt work- the light just flashes. sometimes it freezes on the today screen, the power button dont work or anything. really need to sort this!
any ideas? any1 else get this? its where u put ur MDA in standby, and next time u press power button 2 turn on nufin happens, but the leds still flash at the top!
yep i still get the problem! still no cure!
I have exactly the same problem... I just pick up my device from my pocket to use it, I press on the power button once but the device won't wake up from the standby mode. I wish someone can give us a cure.
Low Battery...
I had this happen to me once recently...for me it was becuase my battery was too low. Freaked me out, because everything looked good, but I would power on and get nothing! Right after it started it powered on for a sec then quit. I had to put it on the charger and leave it for a couple hours to get a good solid charge, then everything was fine. Hope this helps....
thanks for the response, unfortunately mine is definately not related to the battery charge!
mine hasnt done it in the last day, ive been leaving it a while before putting it into standby. i used to exit my app (messaging or whatever) and shut it off straightaway, but i give it a sec or 2 to make sure its all good
and its doin ok so far!

S200 Hanging every now and then

I have Qtek S200 for 3-4 months.
First I had wm5 2.20.7.34. The phone used to hang sometimes. Usualy if the wifi was on and I suspend it it will hand when I wake it up. The screen stays lit and no button/touchscreen works. The power button also wont work so I had to do SR.
I thought upgrading to wm6 will fix the problem and I tried pda mobiz 20.b3 and b4.
The phone still will hang sometimes. Finlay I installed Prophet Touch v6. Its great rom but it also hangs and sometimes its 2 times in a day..
There is no way to predict when it will happen but usualy its more often when I use Internet gprs or wifi. Most often when I use the wifi( I guess
I have upgraded to the latest Radio ROM but I cant see any diference.
So my question is, How often u guys get hangs on your prophets?
Is this normal?
Is there a way to make it work with no hangs at all or this is the way it is?
Im not using overclocking and the phone usually hangs when its left alone not while I use it.
In wm5 it usually used to hang right after I wake it from suspend while in wm6 I just cant wake it, it stays dark.
Well, when I had the original i-mate ROM I almost never needed to do an SR, unless I was really messing with it.
Then I tried PDAmobiz b4 and I got the phenomenon you describe:
Some times I would turn on the device and notice the clock was an hour or two behind and the device would not respond. Basically it hanged quietly and I didn't even know.
After suffering this for a week I changed the ROM to my current PDAViet 4.0.0.0.6 Touch and it seems fine so far (better then the original).
Perhaps a different ROM, maybe a WM 5 not 6 will work for you.
Also you should see what kind of programs are running in background on your device. Maybe one of them is the problem.
Actually I had the problem u described with the original wm5 ROM not with the wm6 roms.
The thing is that the original rom had many other problems and for this reason I dont want to go back to it.
For example I could connect with gprs without problems but after disconnecting I was unable to connect again. The device was saying "The answering modem has disconnected" or one of 2-3 other messages like that I was in a phone session and so on. The only solution was to restart the phone app...
The phone dialer was terribly slow. When pressing the dialpad buttons it was taking about a second for the phone to respond
Also I noticed that the same problem u described when the device freezes just after wakeup will generally happen if the wifi was left on.
If I switched it off I had almost no freezes.. but u know Ive got this phone to use its network capabilities and it looks like the network part was most buggy
All this is about the original wm5 qtek rom.
With wm6 I only have this case when the phone dont want to wake up. It just stays dark when I press the power button.
It will also freeze somethimes when I work but not very often..
Currently I use Prophet Touch v6 by gullum
I few months ago I have read that windows has some delay bringing up the sd card online after suspend and that this may cause problems if some program tries to read the Storage card before its online. For that reason there was suggestion to install all system and most used programs in the internal storage.
Now I have noticed that SPB Insight was installed on the storage card and I use its today plugin so I reinstalled it to the internal storage to see if this will help.
I have the same problem
Please help me to find out why my S200 hanging and hanging and hanging
i have got same problem in my prophet...my model is orange m600............is there anybody to help....

Bluetooth hardware fault?!

Hi,
Got a Vario 2 running TNT 2.0 Pro pp6 ROM.
Its brand new and was working great with TomTom 6 and my 32 channel bluetooth GPS device.
Then after two days of having the phone, Bluetooth radio would not turn on at all - i.e. in comms manger when selecting Bluetooth it starts loading and then goes back to disabled.
In Bluetooth settings, trying to enable and find a device comes back with bluetooth hardware failure. I therefore thought it was faulty as was goign to send it back.
A Hardware reset does not fix it, nor does flashing back to orginal WM5 rom.
However...
Removing the battery for over 6-7 hours and then restarting the device, bluetooth comes on from boot up and works fine. Then if bluetooth is turned off or the phone reset for any reason it will not turn on again until the battery is taken out for 6-7 hours again! WTF!?
Since then I have also found that starting Tomtom 6 (which hangs or goes realy slow as it cannot start the bluetooth radio), if while tomtom is booting i then go into comm manger and start bluetooth it eventually turns bluetooth on! BUT no devices are then discoverable.
Again take battery out for 6-7 hours and bluetooth is ok at start again!
Any ideas whats going on?
Is there an bluetooth radio/stack that can be upgraded to try differnt drivers etc?
Cheers
T-Mobile Vario 2
Super SID
TNT 2.0 Pro PP6
Radio 1.16.00.00
No one had the same fault then?
Time to take it back for a new one!
Yep, same here.
Was using Tomtom at the time, and it just lost connection with the Bluetooth GPS. Ever since, Bluetooth will not turn on - Blue LED flashes, but it stays turned off and fails with a bluetooth hardware error message..
I've flashed new ROM's and done hard resets, and never managed to get BT back again. Never actually had a chance to try leaving the battery out for so long though, should give it a try.
Andy.
exactly the same problem here, if I try to search for new devices to pair I get a "Problem with Bluetooth Hardware" error
So has anybody got any idea what could cause this?
Really doesn't make a lot of sense to me. I managed to get it working again briefly, as per instructions in first post, but never again since.
A reflash surely sets the RAM/ROM back to default state, and leaving the battery out is obviously resetting the hardware in some form. What I don't understand is why it happens in the first place, and why leaving the battery out would fix enough for it to work again, albeit briefly, but then not again til another removal of the battery.
In all my 30 years or so of playing with electronics hardware it makes little sense to me.
Andy.
I'm glad I'm not the only one stumped by this.
I just can't understand how it can work perfectly well and then all of a sudden stop working. I've tried 5 different radio and OS roms in the last 2 days and they all have the same problem.
Madness
I was using the Schapps WM6 ROM and had this same issue to a t. Installed official HTC WM6 ROM and problem solved. Point blank though, Windows Mobile sucks, I'm going back to my Symbian V3.
I have this same problem.
I had my BT working fine - connected to my PC for AS, and to my BT GPS. But, now it won't start up.
Using Comm Mgr, or connex-BT doesn't work.
Any solutions?
-bZj
have the same Problem Anyone an Idea for this

[Q] Android Completely shutting off?

I used to have a problem with the SOD until i changed to my current radio. My current problem is whenever i start up a fresh build of android, it always freezes during the set up screen. After i restart and boot up android again, its works like new for a couple of hours and then completely shuts off. I dont think its like the SOD, when i try to turn the screen on nothing, not even the buttons light up. After another reset, all my widgets and apps i have on the home screen are reset. Anyone know whats going on here? I am running Energy ROM and shubcraft 1.5 but it seems to do the same thing regardless of android build. Also i should mention this is after i formated my sd card.

[Q] Serious Touchscreen Lag Issue [UPDATED]

First of all, sorry if this thread is out of place, but I'm not sure where else to turn.
My HD2 worked terrifically with FroyoStone 3.2, Hastarin 7.6 up until last Wednesday (5 days) ago. Then I started to experience, and have not been able to fix, serious TS lag issues.
Symptoms: I hit the unlock button, swipe to unlock, and the touchscreen will be responsive if I KEEP using it...if I pause for up to 3 seconds, the screen is no longer responsive. I have to relock the phone, unlock, and then swipe again to get it to work.
The touchscreen works perfectly fine in Windows Mobile 6.5. (Energy 2361X)
Attempts to fix: I've formatted the SD Card inbetween trying all of the following items-
1) Switch to MDJ ROM with MDJ kernel
2) Switch to Bluetopia ROM (0.5, 0.6 & 0.6.1) with Hastarin 8.0 OR 8.1
3) Switch back to FroyoStone 3.2 with kernel that comes with it
4) Update Radio ROM
5) Update to new Energy WinMo ROM -- after running Task 29 first.
Today, I purchased a new SD Card, loaded it with a clean install of Android, still have issues.
Also tried:
1) Turning off all LED notifications
2) Disabling Auto brightness in WinMo and Android
3) Disabled Screen Auto-Rotate
Honestly, I'm all out of ideas, and I hope someone in the community has a way to help out. I find it so odd that the touchscreen works great right after a "wake-up" as long as I keep it constantly stimulated...then fails to respond if I let it sit for more than three seconds. Is this a polling issue?
All ideas are appreciated. Thank you
UPDATE:
Followed another thread that suggests using the exact same WinMo ROM as the Builder -- matched my ROM with cmylxgo's WinMo ROM (author of Bluetopia) after another Task 29...no fix.
More Information
UPDATE 2:
Also tried 32K clusters and 64K clusters when formatting the card. Problem exists with either size.
There are G-Scripts to disable the G-Sensor and then re-enable it without rebooting.
If you want to jump to the extreme and want to remove all the sensors entirely.
Code:
su
rm -rf /system/lib/hw/*.sensors.so
Terminal
Thanks for your quick reply.
Unfortunately, I'm not the best with working with Linux/Terminal commands -- I tried typing in your code, and it returned that there was no such file/folder as -rf, and then I removed that section, and it said that it could not find the system/...
So obviously, there's something I'm missing, or an error in the syntax, that I cannot debug.
Any help is appreciated.
Are you having any data freezes or are you on an area with poor to no signal? I get really bad system lag when I loose signal while my phone is trying to download. Ppp will freeze and the phone will be unresponsive till reboot. Only way I avoid this is to turn off data if I got into a building I know I will loose connection in.
Sent from my HTC HD2 using XDA App
Updates
Thank you for your reply --
I checked into the disconnects being an issue by enabling Airplane Mode and seeing if I still had the same results, and unfortunately I do. I tried by disabling the Wifi and Mobile network separately, and still same issues.
But, here's an update on the issues:
Installed TYTUNG's NexusHD2-FRG83 V1.6, and this thing is very, very lightweight. Great battery life, great data (went to sleep, woke up, and not only was my phone still on...but I didn't have to reset data to check email...nice). The issues still remain. These are the newest things I've tried:
1) Remove Boxwave screen protector
2) Run from Airplane Mode.
I did however notice something really, really important: when the screen freezes, if I simulate a multi-touch gesture (pinch to zoom, etc), sometimes it wakes up! This is not a guaranteed thing (like 60%), but definitely something to work with.
Also, I noticed that one time that the touchscreen stopped responding, I tried the multitouch, no help...but I stayed on it. Multitouch tapped like crazy for a solid 6 seconds...then tried to shut the screen off -- and that button didn't respond. It was as if I saturated some bus of some sort that it had to clear out before it could finally shut the screen off.
Finally, I've noticed that the screen just needs to shut off for the touchscreen to unfreeze -- not go into a full lock situation. So, if the screen goes black, and I hit the lock key immediately, it'll unfreeze the TS.
Thanks to everyone who is trying to think of an idea!
i seem to be having the same issues as you right after i wake the phone up to unlock it. locking the phone is a habit for me to try and save as much battery as possible and also to not press any buttons while in my pocket.
im running a cyanogen rom and i changed the setting to allow me to unlock the phone by pressing the center windows key. i noticed that when the phone will not allow me to unlock it i can press the menu key and unlock it but i cannot use the touchscreen at all until i relock and unlock.
sometimes i have to do this a few times before the touchscreen comes back. i was thinking it could be my sd card but this started to happen today. i have been using android on my hd2 daily for the past 12 days without any problems. its weird that it started all of a sudden.
so it seems we still dont have a fix for the touchscreen freeze yet, right ?
Same problem here
Hi, I am experiencing the same problem.
Tried few versions of Android, The same problem repeated itself.
So I had to return to WM6.5 - there it works good. Only I have to reset the phone twice a day :-(
Hope someone will find brilliant solution for the sad problem that prevents using Android...

Categories

Resources