[Release] Custom Rom "Breakneck" for LG Vortex - Android Software Development

.: About The Rom
This Rom is for the LG VORTEX only!!!! It will not work with any other phone.
To use this rom you will have to be on 2.2 and be rooted and have the custom recovery installed. To root use z4root. To install the custom recovery go here http://androidforums.com/getitnowmarketing/221375-custom-recovery-vortex-thunderc-vzw.html
Since you have to put the files on your sdcard for the custom recovery, this is a good time to put the Breakneckmod zip file on the root of you sdcard too.
After you get the custom recovery installed create a nand backup.<h2><B>MAKE SURE YOU DO THIS SO YOU CAN GO BACK TO OEM.</B></h2> Now that you backed up your nand clear your cache, So go to <B>WIPE</B> and pick the following
Wipe Data/Factory reset
Wipe Cache
Wipe Dalvik Cache
Ok Since you Already have have the custom rom on your sdcard go ahead and pick "Flash zip from sdcard"
That is it you have a custom rom on your phone
.: Changes in Breakneck V1 rom
Just to start of my saying there are a few changes in this release. This was just to get things start.
Pre Rooted
BusyBox installed
BusyBox run-parts support
Nano text editor installed
Bash shell support
Zipaligh all apk file to optimize ram usage
Google search installed
ADW Launcher and LG Home (until I figure out how to remove LG Home cause alot of stuff is hard wired to LG Home)
Most of Verizon bloatware is removed
After you install you will have to pick LG Home or ADW launcher
If you want to use google search than Pick ADW launcher.
I want to thank dots, LBPHeretic of Androidforums and ciwrl, and Winnah9000 at Cyanogenmod
You can download it here breakneckmod

.: Changes in Breakneck V3 rom
What is Changed in ROM
Updated to 2.2.1
Pre Rooted
BusyBox installed
BusyBox run-parts support
Nano text editor installed
Bash shell support
Zipaligh all apk file to optimize ram usage
Google search installed
Custom Launcher
All of Verizon bloatware is removed
Deodex both framework and apps
Reduced rom size to 81MB (more space for apps and what not)
Replaced the stock music player with Musicmod
Included jit enabler to go from 24mb to 32mb and speed up the phone
Included ES file manger
Includes Custom Kernel that is OVERCLOCKED. Have to use SETCPU to set the speed cause it depends on your phone
Includes Wireless tethering
Includes Updated apps
Custom Wallpaper
The phone boots at 600 MHz you will have to change that when you install SETCPU from the link above. pick a Speed and that STRESS Test it to make sure that it can handle that speed. after the Stress Test. Open your camera app to see if it crashes if it crashes than back the overclock down by one and test the camera app again if it works than go back to SETCPU and put a check in "SET ON BOOT".
Download link in the menu
MD5 Hash is cd94e925bb2a5b4ce8cbbcd65d5b865d
I WANT TO THANK GETITNOWMARKETING FOR THE SOURCE OF THE KERNEL IF IT WASN'T FOR HIM I COULDN'T HAVE MADE THE TWEEKS TO THE KERNEL. I WILL BE SENDING HIM A DONATION THIS WEEKEND.
The next release will be gui changes only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.: Changes in Breakneck V2.1 rom
Just to start of my saying there are a few changes in this release. This was just to get things start.
Fixed sh problem
Pre Rooted
BusyBox installed
BusyBox run-parts support
Nano text editor installed
Bash shell support
Zipaligh all apk file to optimize ram usage
Google search installed
ADW Launcher
All of Verizon bloatware is removed
Deodex both framework and apps
Reduced rom size to 81MB (more space for apps and what not)
Replaced the stock music player with Musicmod
Included jit enabler to go from 24mb to 32mb and speed up the phone
Included ES file manger

reserved for later

Thanks for the tips on getting me back to 2.2 from the 2.2.1 upgrade.
I've tried version 2 of the breakneckmod and I cannot adb shell into it. It gives me the following error when I try:
- exec '/system/bin/sh' failed: No such file or directory (2) -
check_LGE_official: fopen(/sdcard/thunder_security) error
Any ideas?
Thanks!

Yeah I fixed the problem in V2.1 for some reason in version 2 the sh in bin got renamed to sh0 don't know why it is strange but version 2.1 is being uploaded right now
sorry about that let me know if it is fixed cause it is fixed on my end

Installed and works perfectly. Thanks a bunch for your work and develpment.

Updated to Breakneck mod V3

Is it possible to edit the way the home screen functions? for example; number of screens, transition effects etc. I like the home screen otherwise obviously I would use another, but I am more of a 3 screen kinda guy

When can we expect a new update for your rom. Because im like thirsty for one lol

I tried getting the Breakneck MOD and it says that it could not be found....?

Go put this in the LG Vortex section or request the section .

Related

Galaxy S Theme

Disclaimer:
I am not responsible for anything bad happens to your phone after you flash this theme.
Flash this theme at your own risk!!!
Just don't forget to nand backup your phone before flashing this theme.
Yet another theme ported to our phone.
Credits to steve_t, creator of this theme. See his thread here.
I checked this theme on Void#echo, LOL v1.2, and Megatron v.1 ROMs.
EDIT:
It is confirmed that this theme works on Void#echo, Void#delta, Devoid ypsilon, LOL v1.2, and Megatron v.1 ROMs.
It is reported that this theme works on Ubuntdroid 4, Optimus T P509
WARNING:
Partially working on OptimusX (FC on Market); see this post
Not working on Darkmoon v.2 and LOL v.1.4
For other ROMs, give it a try and tell us the result (i.e, working OK or not) so that others using same ROM with you will be assured whether to use this theme or not.
This theme has original/default window animation. See post #2 below to change window animation.
Download link: MediaFire
Instruction:
To apply, copy zip file to sd card and flash it.
Don't forget to nand backup your phone first!
After flashing, first boot may take longer time (3 ~ 10 mins)
Included in zip file:
The theme itself
AndroidParticles1 Blue boot animation. Credits to Dysgenic.
Themed Market v.2.3.2. Credits to 00.ante
Screenies:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changing window animation
In case you want to change window animation, you can do it yourself. Try these steps: (as usual, do nand backup first before flashing)
Get xmlsForWindowAnimations.zip here
Extract it to your PC, there will be 5 new directories extracted.
On your PC, copy GalaxySThemeForO1.zip to a file, say you name it 'temp.zip'
Open temp.zip (just open, not extract). I use 7-zip here.
Navigate to directory 'system\framework', double click framework-res.apk, Continue navigating to directory 'res\anim'
Drag-drop all files in one directory (choose 1 directory among 5 extracted directories you got from xmlsForWindowAnimations.zip) into 'res\anim' directory
Close 7-zip, answer 'Yes' when asked whether to update framework-res.apk
If you know how to sign a zip file, do so, copy signed file to sd card and flash it.
Otherwise, copy temp.zip to sd card, reboot to recovery, choose 'Other' then 'Toggle Signature Verify', go back to main menu and flash 'temp.zip'
Reboot
I can't see the screenshot, is it dead link?
Reuploaded screenshot.
Can you see it now?
no probs with screenshots
works on void delta too.
Thanks for your info.
the icons in notification bar is in white colour like lol rom, not blue
im using void delta.
Those white icons belong to 3rd party apps?
If so, am afraid that we have to modify those 3rd party apps
If you think that is not the case, could you upload a screenshot?
Thanks
here we go,
just one doudt, i delested gingerbread folder from void settings , tht be the problem?
pressing power results in abnormal reboot straight from android logo without lg logo.
had to restore nand and now lots of apps fc :|
update : finally got it working, shudnt hav deleted gingerbread
is there any way to have battery meter in this theme?
After instaling this my market stop work only Fc on optimusXrom
Ater having spent one day using this theme i find it very clean, elegant although it is a little too blue .Stays as my theme of choice.
No fc's related to this theme. I am using devoid ypsilon.
Ignore spelling : English seems Greek to me
aragarm said:
After instaling this my market stop work only Fc on optimusXrom
Click to expand...
Click to collapse
So is it ok if I assume that this theme partially working on OptimusX ROM? i.e., only market has FC?
Thanks
I'll try one more.
good theme
Change battery icons to battery meter
boykioy said:
is there any way to have battery meter in this theme?
Click to expand...
Click to collapse
Yes, there is.
My post here may give you hint.
Good theme
Please make it with circular battery , transparent notification bar and better animation if possible.thanks
Sent from my LG-P500 using XDA App
This theme looks great with 140 dpi !
I like this theme very much. Thank you!
I want to use widgetlocker (installed on my phone) to lock the screen instead the theme default screen locker. Every time after phone reboot i get that default screen locker and i dont know how to disable it. Please help me!
Thank you!
LE: I can't install AndroidParticles2 animation. A tried to use adb comands in cmd. I get: "No such file or directory" error. Same problem with the terminal emulator. The 480x800 AndroidParticles2 is copied on the sdcard.

[ROM][BL1.1] VEGAn-TAB GingerEdition STABLE RC1 [UPDATED - 4/11]

***ATTENTION IF YOU ARE COMING FROM A 4349+ STOCK ROM or MOD based off that PLEASE VISIT THE FOLLOWING LINK TO DOWNGRADE YOUR BOOTLOADER AND TNT VERSION BEFORE FLASHING CWM AND THIS OR ANY OTHER ROM****
http://forum.xda-developers.com/showthread.php?t=1036956
VEGAn-TAB GingerEdition STABLE RC1
RC1? What happened to BETA? I skipped it... this was a MAJOR overhaul of code and features (this is one reason it has been a month since the experimentals stopped) and has really reached the stable build point. So what's missing? Nothing except High Definition Video Hardware Decoding... not sure if we will ever get that one working right on Gingerbread. Here are some of the feature additions and changes that have been done since the last Experimental:
* Uses the latest Pershoot kernel as of 04/09 - (install any modules you need using the instruction set at the bottom of this post ***most don't need this additional functionality***)
* Switched over to newer Camera Rotation Fix
* Added Tablet Friendly Launcher VTL.Launcher to the launcher options
* Screenshots/DDMS fixed via several commits to Nvidia GIT etc.
* Added in the External Storage Format and Unmount
* Pulled in the Tablet Tweaks
* Modified Tablet Tweaks to not Break our Device or Google API's
* Fixed up the Fullscreen handling issue
* Edited Statusbar buttons to fit with VEGAn-TAB Styling
* Newer Boot Animation - lowered quality to improve boot performance and speed
* Fixed layout of Launcher and added settings to settings page if default
* Added basic Google Apps to avoid confusion
* Added Tablet version of Quick Office
* Added Basic Tablet Keyboard Layout for English version of Gingerbread Keyboard
* Changed Default Browser User Agent to Desktop
* Added code to remove Phone Settings without losing market functionality
* Lot's of code cleanups and minor bug fixes
The Google apps has already been applied. Market WILL NOT SHOW in app drawer until you CONNECT TO A WIRELESS NETWORK. ONLY THE APPS THAT YOU CAN'T GET FROM THE MARKET ARE INSTALLED. Stuff like GMAIL, MAPS, etc. need installed through market. This way you will easily stay up to date on those apps. MY APPS in the market WORKS if it doesn't for you then you have restored something you shouldn't data or app wise or not followed the directions correctly.
Also installed is the QuickOfficeHD (pulled from adam).
SINCE THIS IS A MAJOR RELEASE VERSION - NO MATTER THE ROM YOU ARE COMING FROM YOU MUST WIPE DATA! - Use Titanium Backup or similar to save app data. HOWEVER do NOT restore any system app data.... ie. Wireless Settings, CMParts Setting, etc.
After the first boot, and all the setup screens, PROMPTLYreboot the tablet to finish installation.
Install this using CWM 0.8 only at the moment. Till we can figure out why some tablets have issues with newer CWM versions.
****The Latest Flash player from the market now works. Latest google maps now works download from the market.****
Internal Memory is mapped to SDCard and external SD Card is mapped to SDCard2.
Quadrant = 2100
Nenamark = 41 fps
DOWNLOAD is now in the downloads section here: http://vegantab.gojimi.com/downloads
Direct Download: http://vegantab.gojimi.com/download/VEGAn-GE-7.0.0-RC1-Harmony-signed.zip
MD5: a90c97381d156ed5f43cdd2030472689 VEGAn-GE-7.0.0-RC1-Harmony-signed.zip
I am going to work on a more specialized installation instructions set soon I think. Installation is just like the experimentals through CWM wipe data/cache/dalvik... no exceptions. It could take up to 5 minutes to boot the first time as it is building the dalvik database and cache. Remember to reboot after first boot and setup screens to finish installation. ---- If you have issues booting the first time (ie. boot loops) and you have never run any other gingerbread build before then you probably need to NVFLASH to stock before you can run any GingerBread builds as there is a partition issue from factory on your device.... NVFLASH to stock will repartition everything for you.
Bug Reports can be done here in the forum for now... though I am working on http://vegantab.gojimi.com/bugtracker but we are having some issues with new user signups at the moment.
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installing any of the additional kernel modules:
visit pershoots blog and find the latest post about gtab/zpad kernel: http://droidbasement.com/db-blog/
find the following and download:
lib-2632.36.tar.gz (kernel modules)
Download: lib-2632.36.tar.gz
To use one of the kernel modules:
Pull the one you want from lib-2632.36.tar.gz (winrar can open this),
adb remount
(if the folder modules doesn't exist then first - adb shell mkdir /system/lib/modules)
adb push MODULE.ko /system/lib/modules/
adb shell chmod 644 /system/lib/modules/MODULE.ko
adb shell insmod /system/lib/modules/MODULE.ko
Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality. ie. insmod /system/lib/modules/cifs.ko
RESERVED...
Reserved...
Sweeeeet! Throwing this on right away.
good news
downloading now
br
i just installed harmony cm7 stable and now you do this! lol
man... you guys got me flashing 2 times a day now!
wow!! A M A Z I N G. downloadin as i am typing. looks sexy too.
i come here looking for Cyanogen 7, and i find THIS?!! Come on!
No - seriously, this is AWESOME i can not WAIT to get home to flash this!
i was thinking hard about a Xoom, but realized that we have USB AND working microSD slots. and with all this gingerbread now, why bother!
so does this Auto mount Ntfs drives? or are we still haveing to mount them manualy
Looking good! Thanks for your work - flashing now!
cuzzinz said:
i just installed harmony cm7 stable and now you do this! lol
man... you guys got me flashing 2 times a day now!
Click to expand...
Click to collapse
This rom is the reason why I've hold off installing CM7.
Can't wait to get off work to install
Thanks Gojimi.
Does this support location via wifi?>
Will the android market web page recognize this like it does VeganTab 5.1.1? That has been wonderful for getting some things to install that the market just wouldn't pick up through a search on the tab for something reason (like Samurai 2).
ghostfaceg35 said:
Will the android market web page recognize this like it does VeganTab 5.1.1? That has been wonderful for getting some things to install that the market just wouldn't pick up through a search on the tab for something reason (like Samurai 2).
Click to expand...
Click to collapse
Have you tried changing your build.prop to recognize the device as an Atrix? I believe you simply rename the device to Olympus within the text.
is the camera in CM7 based roms and gingerbread just messed up on the gTab?
cuzzinz said:
i just installed harmony cm7 stable and now you do this! lol
man... you guys got me flashing 2 times a day now!
Click to expand...
Click to collapse
+1.
Dang you GoJimi!!!
And here I thought VeganGinger would die off since CM7 looked so nice.
Crap!!! Now I've got to set it up ALL OVER AGAIN!
Just Kidding. It looks awesome and I'll happily Wipe data and start over for this.
whats the recomended kernel for this?
Curious what kernel this is built on also. Any plans for hardware video acceleration? Sorry had to ask.
Between this and CM7 stable release for harmony there is so much to try.
it is good stuffs for me so far. Wish the lockscreen was full size and the camera worked properly but other than that it is good stuff
gojimi. Bless you...and DAMN you! I just got CM7 loaded the way I like it. Downloading now...
switched to rotary revamped lockscreen and it messed up. the lockscreen is half the screen size and doesnt allow me to unlock, wtf do I do?

[Guide] Clean Install For Custom Rom

I made a tutorial for clean install a rom
Clean install Rom is to eliminate strange bugs for some people
1.Re-flash Stock SE eclair using PCCompanion Here
2. Re-Root your x8 and install xrecovery
khartaras said:
Rooting
This is very simple to do, really.
First, download SuperOneClick (thread here: http://forum.xda-developers.com/showthread.php?t=803682) and place it on your desktop.
And SE X8 Driver Here Thank's to treebill
Next, on your phone, go to Settings -> Applications and enable Unknown Sources. Next, go to Settings -> Applications -> Development and enable USB debugging.
You also need the proper USB drivers. To check if you have them, start SuperOneClick.exe and click Driver Check. If the driver check fails, update your phone with PC Companion.
Now, connect your USB cable from your X8 to your computer. When connected it is VERY IMPORTANT to select CHARGE PHONE. Really, I can't stress this enough.
Start SuperOneClick.exe and just click ROOT. Everything should go normally. You might get a message asking you if your OS is 2.0 or higher, just go ahead and click Yes.
You should now be rooted!
xRecovery
YOU MUST BE ROOTED TO DO THIS
Installing xRecovery is the first step in the world of custom ROMs. Installing xRecovery also means if you are stuck in a bootloop, you can just recover to a working backup.
The first step is to download xRecovery mini-beta 0.1 (any other version WILL NOT work on your X8) (download HERE: http://www.megaupload.com/?d=8AJTKDTQ).
Next, download Root Explorer (download HERE: http://www.megaupload.com/?d=LGC110EX).
Copy both the xRecovery folder and the Root Explorer .apk to your SD card.
Install any file manager from the Android Market (I recommend OI File Manager or Astro) and use it to browse to the Root Explorer .apk file and install it.
Run Root Explorer, browse to the xRecovery folder and copy the 3 files inside onto the /system/bin folder.
xRecovery is installed. To start xRecovery you press the Back button while the Sony Ericsson logo is showing during boot. Restart your phone and just keep pressing the Back button.
To move around in xRecovery you use the volume buttons, to select an item you press the Home button (the middle one), and to go back you press the Back button. Go ahead and make a backup of your current system (make sure you have at least 300MB of free space on your SD card.
You'll find the backup you just made in the xRecovery/backup folder. Name it something you can identify (don't use spaces). Copy that backup onto somewhere safe on your PC
Click to expand...
Click to collapse
3.Install A custom Rom
A.Choose custom Rom Below
B.Install Custom Zip or you can rename to "update.zip"
C.Do Factory Reset (Full Wipe)
D.Clear Battery Stats (optional)
E.Reboot Phone
Here The list of Custom Rom
AbirXtreme said:
1. Froyobread : This Rom is a great choce for beginners, its stable and fast. it's core cm6. Android 2.2, a great upgrade if you are still using the 2.1 stock eclair. its also one of the most famous roms so if you have any problem lot of people are here to help you fix it. its best described as a daily usable android 2.2 Rom
http://forum.xda-developers.com/showthread.php?t=1079463
2.Hackdroid: A decent rom, flashy and stylish, sometimes laggy. but overall a very good room. great for starters, however many people stated this one to be a little unstable , but it really depends on what apps you run if you are looking for a good looking rom with visual features this one is a pretty good choice
http://forum.xda-developers.com/showthread.php?t=914513
3.KuyaDroid: This one is an awesome rom, solid and stable, fast performance smooth menu and everything is decent. Its a good rom if your into gaming as it has built in Overclock, Undervolt, and gesture.(note these features can be manually added on other roms too). One more noticable thing about this rom is that it's core is cm7, and android version 2.3( a big update from the stock 2.1)
http://forum.xda-developers.com/showthread.php?t=1109563
4.GingerDX: This is A cm6 - cm7 update of the Famous Froyobread, So far its fast and stable although a few bugs have been reported but its one of the most stable and working cm7 , android 2.3 roms around. its definitely worth a try if you want a fast and smooth working rom. also it has some pretty good features more than most roms out there to exact. Many people state this is the best Cm7 rom out there
http://forum.xda-developers.com/showthread.php?t=1188486
5.BehradGH: this one is a light and simple rom, not a bad choice for newbies but it does not have as much customizable features as the other roms, its a good rom for starters,, so if your looking for a simple rom and an upgrade from your stock rom you should try this one
http://forum.xda-developers.com/showthread.php?t=955467
Click to expand...
Click to collapse
Done,Enjoy Clean Rom
um... I don't think you 'made' a tutorial, you just copied someone's guide and typed some sentences.
its useful for someone who lazy to search
LOL
You're right.
yeah i just wrote this tutorial for helping people
i need help,when i try to copy files into the system/bin folder,i'm getting this message
"You cannot paste here because the file system is read only",then i tryed to change permissions but i can't...please help thanks
you need to mount RW in root explorer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
also add that after you have rooted and rebooted download "root checker" from the market, will tell you 100% if it worked.
and that the Sony Ericsson drivers can be downloaded from here
http://developer.sonyericsson.com/wportal/devworld/search-downloads/driver?cc=gb&lc=en
Stupid tutorial can you simply do full wipe before installing custom Rom.
Sent from my X8 using Tapatalk
XperianPro said:
Stupid tutorial can you simply do full wipe before installing custom Rom.
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
@XperianPRO
stupid for PRO, useful for newbies.
HaN6787 said:
@XperianPRO
stupid for PRO, useful for newbies.
Click to expand...
Click to collapse
Well then just rewrite tutorial to few steps how to root install recovery and do full wipe.
xRecovery not working anylonger...
i've been lurking around this forum and a few other sources for a little time now, but i'm totally new to all this.
just recently i rooted my x8, got root explorer used it to delete bundled nonsense that came with my phone and so on...
then as i installed xRecovery made a backup, tried installing a rom and didn't work, i had forgotten the xxx15 baseband and kernel thing, i went and made the changes following some posts in this section and a flashtool in the x10mini section of this forum, after finished i could see the change in baseband, although i'm not so sure about the kernel (says 2.6.29 and the post said "Baseband 015 - kernel 2.1.1.A.0.6"), and now xRecovery doesn't log on when i reboot my phone.
to make things more frustrating my pc is running ubuntu and all the "easy" ways to do this and the executables are made for windows... reducing my time to deal with
i'd appreciate any help on this...

Ultimate Online Theme Kitchen for Samsung Galaxy S II tutorial

I was using HTC devices for some time and using the ultimate online theme kitchen with it. It seems that this kitchen also works with touchwiz UI roms. Some people in the custom ROMs section sounded surprised so I figure I would post this tutorial
MAKE A BACKUP VIA CWM PRIOR TO FLASHING ANYTHING
Download the ROM you want to MOD and extract all the files somewhere on your computer maybe a new folder or something
Then via your computer goto
http://uot.dakra.lt/
Select File upload and then system files as seen by the screenshot below. You will need to upload the following
framework-res.apk (in the folder with the extracted files from the ROM should be under \system\framework)
SystemUI.apk (in the folder with the extracted files from the ROM should be under \system\app)
twframework-res.apk (in the folder with the extracted files from the ROM should be under \system\framework)
IF USING AN ICS ROM SELECT FLASHABLE ZIP AND CHANGE IT TO EMMC (I have only tested battery mod)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One the files are finished uploading select from the available MODs (I HAVE ONLY TESTED THE FONT,BATTERY and WINDOW (animations) MODs ON GINGERBREAD NOT THE REST SO TRY AT YOUR OWN RISK)
• Battery
• Icons
• Status bar
• Popup
• Lockscreen
• Window
• Fonts
• Bootanimation
And select use this MOD as seen below.
Select what you want and once done select Summary and make sure all the mods show in green. If not most likely you forgot something. Once done click Submit work to kitchen as per screenshot
Once selected you will be given an Order number like UOT-08-31-21-07-1 or something. Write this down as it can take a while for the file to be made.
Once in a while you can go back to
http://uot.dakra.lt/pickup/
To see if your file is ready. If your browser cached the info it should show your file when ready under
Your recently cooked files
If your browser didn’t cache the info then you can select
Show all pickup files
And simply look for your Order number.
Once your file is ready simply download it (I suggest re-naming it as well to something you may recognize) and put it on the Internal SD of your Samsung.
Boot in recovery and make sure to wipe cache and dalvik-cache prior to flashing it
Hope this helps some people
UOT kitchen is great.
The only thing that wont work on the SGS2 is the lockscreen as we dont have the stock one, I have used almost all the other mods (apart from the screen transitions, and for boot animations I always forgot which location was the correct one)
Nice guide
btw: if you are cooking themes for CM7/T mobile theme engine, make sure to untick generate preview as if you leave it ticked the themes wont work.
Used the kitchen back on my Desire when I had it
Now I use Revolution rom on my SGS2
Is this for all roms? Stock or custom? Odexed or deoxed?
Thanks
/CK
Café King said:
Used the kitchen back on my Desire when I had it
Now I use Revolution rom on my SGS2
Is this for all roms? Stock or custom? Odexed or deoxed?
Thanks
/CK
Click to expand...
Click to collapse
Not too sure if all roms but using it on batista rom with no issues
Best bet is to back up before flashing. Worst case you get stuck in boot loop and have to restore
I've used it successfully for battery icon on Leomar V2.6. I'm not sure but I think the cooked zip file updater script does a cache and Dalvik wipe as part of the install, meaning that doing it beforehand is rather pointless.
As always, nandroid first!
carlos67 said:
I've used it successfully for battery icon on Leomar V2.6. I'm not sure but I think the cooked zip file updater script does a cache and Dalvik wipe as part of the install, meaning that doing it beforehand is rather pointless.
As always, nandroid first!
Click to expand...
Click to collapse
In How-To section of the kitchen it says
9. Wipe cache and dalvik-cache (just in case). Do not wipe data / factory reset.
So I have always done it cant hurt anyways even if done 2 times
Café King said:
Used the kitchen back on my Desire when I had it
Now I use Revolution rom on my SGS2
Is this for all roms? Stock or custom? Odexed or deoxed?
Thanks
/CK
Click to expand...
Click to collapse
It will work on anything, odexed, deodex, stock and CM (via T mobile theme engine)
i take a error on CWM 4.0.0.2.
I´ve made de .zip with the option Edify-scrpiting and MTD (default) and the recovery give me a error on install and says that i need to update de script with Edify.
warriorofice said:
i take a error on CWM 4.0.0.2.
I´ve made de .zip with the option Edify-scrpiting and MTD (default) and the recovery give me a error on install and says that i need to update de script with Edify.
Click to expand...
Click to collapse
Could be a bad download simply or the file didn't get made correctly. I would recommend to re upload the files and reselect your mods and attempt to cook a new zip.
Never had this issue as of yet with this kitchen
BTW recovery 4.0.1.5 is available for use via Rom Manager you may want to update it as well
This is truly awesome. Thanks for sharing.
Yeah I second the above comment. I have never tried anything like this before so I was really surprised how easy it was. Thanks for posting this.
Jigsy75 said:
Yeah I second the above comment. I have never tried anything like this before so I was really surprised how easy it was. Thanks for posting this.
Click to expand...
Click to collapse
Glad I could help fellow users
Also I recommend people create new zip for any new rom even different versions within the same rom.
Upgraded yesterday and tried using the old one I made but got a boot loop so it's safer to make new ones for each rom since frameworks can change

Sense Ui For Mi MAX

Sense Ui For Xiaomi Mi MAX
Disclaimer-
Code:
Follow the steps correctly otherwise you may brick your device.
It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
hit thanks if this helpful For You
Whats working-
Everything-
htc camera
htc gallery
htc launcher
htc internet
htc music
htc widget
htc video
htc file manager
hotspot widget
htc location service
weather[not work]
Note- You can install and update all apps from play store, because it detect your Device as htc10 or m9[ according build prop values]
Requirements-
A Rooted Device with cm or cm based Rom installed
custom Recovery
200MB free space in system
Always Step by Step Bcz i am a Blogger too-
1. htc apps installation-
First of all Download htc apps From bellow
Put Downloaded Zip into Root of sd card
Reboot Device into recovery[twrp]
Clear catch , dalvik catch
on Recovery Click on install zip from sd card Navigate Downloaded htc apps zip file
Confirm install, wait for success
Go back and reboot System Now,
2. Flashing htc framework, htc Camera, htc gallery-
Download htc Zip file From Bellow and transfer into Device storage/-internal/external
reboot into recovery [twrp]
Clear catch Dalvik catch,
on Recovery Click on install zip from SD card
Navigate Downloaded htc Zip file and Confirm install, wait for success
Go back/ reboot system Now Done,
3. Flashing Boot logo/splash screen-
Download htc Boot Logo For mi MAX From below{ this is not tested on mi max, RS- 1080px1920] you can create own htc logo HERE
and paste in adb folder
open cmd on adb folder
Connect your phone to pc via usb with usb debugging enabled
type adb reboot bootloader to boot device into fastboot mod,
then type fastboot flash splash htcsplash.img to flash splash img
Done type fastboot reboot
4. Flashing Bootanimation-
Download htc Bootanimation from Bellow
Run Root explorer and Replace stock boot animation in system/media folder
set permission
Done,
5. Changing build prop values-
Go to system folder and edit build.prop file
replace values like this
For htc 10-
ro.product.model=MSM8996 for arm64
ro.product.brand=htc
ro.product.name=pmewl_00531
ro.product.device=htc_pmewl
ro.product.board=msm8996
ro.product.manufacturer=htc
for htc M9-
ro.product.device=htc_himauhl
ro.product.name=himauhl_htc_europe
ro.product.manufacturer=htc
ro.product.model=HTC One M9
ro.product.brand=htc
6. Changing Imei-
Install xposed framework according your Device
Download install and enable this module [xposed imei changer] from xposed/module
reboot Device
run xposed imei Changer and replace origenal imei by htc m10 imei[we can't offer this]
Done,
7. Changing UI-
Download and Install this Theme[sense ui] From bellow
Run theme manager and apply sense ui theme
Done reboot Phone,
8. Change Android iD-
Change android id using android id Changer,
9. Done-
XN Logos said:
Sense Ui For Xiaomi Mi MAX
Disclaimer-
Code:
Follow the steps correctly otherwise you may brick your device.
It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
hit thanks if this helpful For You
Whats working-
Everything-
update-
Theme Now Working, You can Use Different Color for Binkfeed up to 30 Color available which is work for all htc app,
Photo Editor Now working, update gallery app from play store,
Weather now Working, update app From play store, Don't update other apps otherwise it cause force Close,
message App working, Direct use From play Store,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Great. Will try
Fabulous effort Bru
Weather is not working ...it force closes every time ...tested on Dave himself RR 7th august rom

Categories

Resources