[Q] unBricking options/Odin - Fascinate General

Question about unbricking the fascinate and odin use. I am coming from a samsung vibrant, i could flash roms, brick and odin all day without issues. Part of what allowed me to do this was a usb jig with 301k ohm resistor in it. It forced the phone into download mode and then you could odin away.
Does the fascinate have this option? I'm going to pickup the phone tomorrow, this would just be icing on the cake if this was available.
thanks guys.

There are only 2 situations that I've seen that will cause a permanent brick for our phones. One is flashing anything through the "Phone" button in Odin. If you always use the PDA button, you'll never have to worry about that brick situation. The other would be flashing the modem of another phone as I don't think anyone has recovered from this either. Other than that, I think that if you have the battery out, hold down on the volume down button, and plug in the USB cable, it will always enter download mode to help you restore in some fashion.

imnuts said:
There are only 2 situations that I've seen that will cause a permanent brick for our phones. One is flashing anything through the "Phone" button in Odin. If you always use the PDA button, you'll never have to worry about that brick situation. The other would be flashing the modem of another phone as I don't think anyone has recovered from this either. Other than that, I think that if you have the battery out, hold down on the volume down button, and plug in the USB cable, it will always enter download mode to help you restore in some fashion.
Click to expand...
Click to collapse
sounds pretty good, thank you.
the reason i ask is the vibrant would boot onto a screen with a cell phone, warning sign and a computer if you messed up real bad. the only way out was to either have your phone warrantied or use the usb jig i mentioned in the first post. if its a non issue then awesome!

the jig is compatible with this phone. use it in the same way that you use it with the vibrant. just flash the di01 full package if anything goes wrong.

iwasaperson said:
the jig is compatible with this phone. use it in the same way that you use it with the vibrant. just flash the di01 full package if anything goes wrong.
Click to expand...
Click to collapse
thanks man. if someone can, could they add this to a faq or wiki? as the jig is extremely useful and can be made for next to nothing and would probably help out some of the noobies.

Im a noob when it comes to this type of stuff, but what would be the difference between the 301k resistor, and just putting your phone in download mode with the power/vol button w/regular usb.

i0nicx said:
sounds pretty good, thank you.
the reason i ask is the vibrant would boot onto a screen with a cell phone, warning sign and a computer if you messed up real bad. the only way out was to either have your phone warrantied or use the usb jig i mentioned in the first post. if its a non issue then awesome!
Click to expand...
Click to collapse
I had this happen on my Fascinate while I was updating to DL09 / Reflashing to stock.
I got to download screen by just holding down the volume down button with the battery out and connecting the usb.

OneAn9ryN00b said:
Im a noob when it comes to this type of stuff, but what would be the difference between the 301k resistor, and just putting your phone in download mode with the power/vol button w/regular usb.
Click to expand...
Click to collapse
some vibrants came from the factory locked so the download mode wasn't accessible via the button method. so the jig would allow download mode access.

Related

Selling Phone ! Computer Screen stuck vibrant

So after trying countless methods of getting this guy into download mode i failed i think i really bricked it but all it does is it starts up and right away it shows the phone-!-computer screen and nothing els i tried all the methods that i came across after researching for 5 hours straight. if anyone has a fix tell me if not email me at dencho1992 at gmail with a price or offer. id like over 150 but if i cant get it then oh well. this phone is flawless and has no scratches just got it from a raffel drawing and it even has a case. let me know if u know a fix.
uve probably heard this before:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
or buy a usb jig
or
try the aio toolbox
or
contact someone to jtag it, forgot his name on xda but he'll jtag it and fix it for u
were you trying to flash gb bootoders or did you ? if so hold volume up+POWER
haha right when i posted this i went upstairs found a samsung cable and tried it it work first time... didnt show download mode but still reconized in odin.. so happy now and im sure its impossible to brick these guys. so the problem was not the phone it was the cable haha i was using a lg usb so not selling the phone
Lol
Sent from my SGH-T959 using XDA Premium App
Simply solution to fix, just use odin to flash back to stock on that screen.
Just make sure you place all the files on odin first and then plug in your phone.
Should be back to perfect working condition.
aaronhiep said:
Simply solution to fix, just use odin to flash back to stock on that screen.
Just make sure you place all the files on odin first and then plug in your phone.
Should be back to perfect working condition.
Click to expand...
Click to collapse
looks like you only read the first posts in topics.
ferhanmm said:
looks like you only read the first posts in topics.
Click to expand...
Click to collapse
I can't fap to this.
ferhanmm said:
looks like you only read the first posts in topics.
Click to expand...
Click to collapse
What do you mean...?
I read everything else?
EDIT: Okay nevermind..missed one post.
movieaddict said:
uve probably heard this before:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
Has always worked for me... no matter how bad I think I may have screwed up, this is the saving grace.
Glad you resolved it with another cable OP - lol.
That actually works as Download Mode.
Just sayin'
elementalj said:
haha right when i posted this i went upstairs found a samsung cable and tried it it work first time... didnt show download mode but still reconized in odin.. so happy now and im sure its impossible to brick these guys. so the problem was not the phone it was the cable haha i was using a lg usb so not selling the phone
Click to expand...
Click to collapse
good 4 u.............cuz $150.00 was a dream anyways...
Not Impossible
elementalj said:
haha right when i posted this i went upstairs found a samsung cable and tried it it work first time... didnt show download mode but still reconized in odin.. so happy now and im sure its impossible to brick these guys. so the problem was not the phone it was the cable haha i was using a lg usb so not selling the phone
Click to expand...
Click to collapse
I bricked my phone to where I do not even get the screen to light up.
j56bp said:
good 4 u.............cuz $150.00 was a dream anyways...
Click to expand...
Click to collapse
I was hoping I could get it for $50

Galaxy S Completely Bricked - Please Help!

Ok so, where do I start. My sister decided she wants a custom ROM on her galaxy s. So I rooted it, and after much trying, discovered that I could not get into download mode. So I flashed through ODIN, believing that I had now fixed the problem. I then went along, used ADB to get into download mode, installed clockworkmod, and tried to flash CM7. This is where things went pear shaped, the phone will now not do anything, If I switch it on, i just get the black and white galaxy s screen, and nothing else. I cant get into download mode with the 3 button combo, and if i connect it to the USB it does not connect to the PC in any way, is it completely bricked? Or is there some magical way to fix it???
Thanks hope I get some help
UPDATE: I made a USB Jig and it worked perfectly! The phone is all good now thanks everyone. This thread can be deleted if needs be!
I guess you need to buy or make a USB JIG!
http://forum.xda-developers.com/showthread.php?t=819551
edit: You can also try removing the battery for 1 minute, hold power, vol. down and home key and then put the battery in.
Buy/Make a USB Jig
When uve got ur Jig - Remove Battery - Reinsert Battery - put Jig in - Don't Touch any Buttons - When Download Modes comes up remove Jig - Flash With a Stock Rom From samfirmware
the USB Jig Will Force the Phone into Download Mode
ok ya, i know about the USb jig, only thing is, any idea where I can get one in South Africa? lol, my soldering skills are not up to scratch?
Chiller89 said:
ok ya, i know about the USb jig, only thing is, any idea where I can get one in South Africa? lol, my soldering skills are not up to scratch?
Click to expand...
Click to collapse
Well.. ebay?
There are many "technical support shops" where you can drop your phone and they will re-flash it for free (as long as you have the bill). They have their own "usb jig".
What about recovery mode (hold power, vol. up and home key) ?
Also retry to get into dl mode several times...it might not have worked the first time...good luck for you..
got one from ebay
look for "Fix Download Mode USB Jig Samsung Galaxy S"
it worked like a charm
Try this.
Glad it worked for you.
A quick question about where you bought the jig bits?
Chiller89 said:
UPDATE: I made a USB Jig and it worked perfectly! The phone is all good now thanks everyone. This thread can be deleted if needs be!
Click to expand...
Click to collapse
hi, I just wanted to know how easy it was to find the parts for making the jig, I'm based in Johannesburg and am looking to make a jig for my Galaxy S2 to clear kernel counts and the Exclamation triangle.
Any help would be great thanks.

need help wit sgt-p1010, please!!!!!!!

hey guys is will need some help with this device im not kind of a noobie on this kind of things bcs i been working with several phones, like the veteran xperia10, galaxy ace, motoroi2, etc etc. but never with a tablet
here is what it happens a friend ask me if i can upgrade his sgt-p1010 to a newer version, honeycomb or maybe ics, i´ve read a lot of posts regarding this on how to upgrade it trough odin everything was fine until the reboot of the device, bcs by my mistake i flash a rom of the 7.7" tab and this one is a 7" only now the tab is not turning on, odin is not recognizing it, either samsung kies or the pc. buttons are not responding it wont charge and cant enter to download mode.
I REALLY NEED HELP FROM U GUYS, HOPE U CAN HELP ME
ps. srry for my english :laugh:
This kind of thing can result in the inability to boot which can only be repaired by the use of specific hardware, i.e. this could be a "hard brick". Then again, maybe it can be restored to working order by flashing it again (a "soft brick"). So the very first thing you need to know is, can it get to download mode?
Turn it off, if it's switched on, and charge it for a couple of hours,say four hours. Use the original charger connected to mains. It doesn't matter if it shows anything, or nothing on the screen, let it charge. This is to make sure flashing it won't fail because it doesn't hold a charge.
Now connect it to the PC with the original USB cable. Then after making sure it's switched off, switch it on by pressing the On/Off button, while simultaneously the Volume UP switch. Press them both at the same time, and keep them pressed! If you're lucky you'll get the yellow graphic with the download text. A phone symbol, an !, and a PC symbol is fine too. Even if it doesn't show anything, you may be in download mode, so install the right drivers, and hopefully Odin or Heimdall will recognise is, and will allow you to flash the right ROM.
well i already let it charge for all night long and nothing happens after i perfomed the flashing the screen was totally in black but it doesnt shoes anything i mean the tab was turned on, then apparently batterie dies and after that is not charging. already tried with the heimdall thing but it says that device is not connected.
I think that this is going to be a HARD BRICK
so do u thhink there is another way to solve it?????
or it will be necessary the JTAG stuff???? bcs i dont want to try that it seems that is very difficult to me bcs i dont know nothing about hardware jejejeje
You have installed the Heimdall driver? It's called zadig.exe. Then you have to go to download mode and connect the Tab to the PC with the USB cable. Then Heimdall hopefully will detect the Tab.
If there's no way software will revive the Tab, it's hard bricked and will need hardware to get it working again. There's this guy mobiletechvideos.com who will repair any kind of brick. Basically he uses the JTAG on the board of the Tab and a special box to flash the right ROM to the Tab, even when it's dead. Some here have tried the service, and they say he's quite reliable. Another way is to modify your Tab with Adam Outler's Unbrickable Mod. It's brilliant, you can't soft brick your Tab after that, but it involves soldering very small components on the board of the Tab. The mobiletechvideos guy can do it for you I believe.
Well, I guess you just got a hardbrick .
The only way to fix this problem is go to SAMSUNG SERVICE CENTER.
Sent from my GT-P1000 using xda app-developers app

Unbricked a Hard Bricked Captivate - Truly Invincible Phone - No JTAG

Past few days were the worst for me as I had Hard Bricked my Captivate.
*** History*** (You may skip this is you wish)
This all started few days ago, like every cappy owner I too had a craze of testing different Roms, untill i settled for RemICS. But soon after a month I got bored and moved to Nostalgic 6.2. The rom looks good, but then when I called someone, there was a lot of static on the line and the other person could not hear me. So I decided to try a different modem, so I installed a different modem and things went back to normal.
Later I found another post on XDA, a comparision table for different modems on captivate. So i wanted to give a try, & this is when things started to get rough.
I installed a few modems and then found that my mobile would not get any network signal. So I planned to use ODIN One-Click (I897UCJF6-final-OCD-REV0) and go back to factory. I used ODIN and was able to go back to factory and everything was back to normal.
***When & How I Messed up my Cappy***
As I was back to Factory (2.1) I wanted to upgrade it to GingerBread. I used Samsung Kies to update it to 2.2 Froyo and while this happened, Kies downloaded the firmware, however while flashing the phone it was stuck at 3% and was there for about 4 hours and wouldnt move further, and the screen was solid green and no images or characters. So I took the risk and manually killed Kies and rebooted the phone. Now the phone would come to AT&T screen and was stuck there, tried the firmware update again and still had the same issue. This is when I decided to go back to Factory using ODIN. Used Odin to flash the phone again and it wouldnt move ahead of Factoryfs.rfs and would be stuck there for hours. So I took the risk and disconnected the cable (I know there is a risk of hard brick, but I trust this phone so much and was impatient to give it another go) and restarted the process. It again did the same thing, but this time the phone shutdown and was on a Black Dead screen. I disconnected the phone and tried to put it to download mode and it wouldnt work. The phone would just not show any signs of life. Connected the charger to check if there is any display and still had a dead screen & no sound. ODin would not recognise the phone anymore and no signs of any PCI device in device manager. Even tried Heimdal and still no go. Tried this for the whole day and i was preety satisfied that this might need JTAG.
I had also left a post for connexion2005 on http://forum.xda-developers.com/showthread.php?t=1041042
By now I had started to surf ebay looking for another Cappy or Infuse. All the signs that the phone gave me were of a Hard Bricked Captivate. However I did notice that if I reseat the battery and then try to power ON the phone, there was no sign of life, but after leaving it for 20 minutes the phone would get a little warm. So I knew that the phone was still alive, just a no video/no post kind of situation.
It was 11:00 pm when it just struck to me that I should try Linux, as there was a faint possibility that Linux may recognise the phone if it was in any kind of life mode.
So i grabbed a copy of Ubuntu and installed it on the same laptop, where the phone showed no life and used the same usb cable. Well once the OS was installed all I did was tried using the Vol UP + Vol Down + USB to put it into download mode and to my surprize the phone immediately went into Download Mode and there was display. :good::good::good::laugh::good::good::good:
Then I just flashed the phone with ODIN and went back to factory........ and everything is back to normal. :laugh::laugh::laugh:
I wouldnt be trying to brick the phone again, but if anyone has a hard bricked phone can definately try this and hopefully should be able to boot back. Please let me know if it wokred for you.
I am not sure if this is the right section to post this but, definately it worked for me where the phone showed all the symptoms of a Hard Bricked Cappy. If the moderators feel it should move to a different section, please feel free to move it.
I am now convinced that Captivate is Immortal...... :angel:\m/:angel:
Please use the Thanks:good: button if this worked for you.:good:
I may not be able to recreate the issue and havent captured any images, but if you have a dead cappy, you can definitely try this and let me know.
Glad your phone got fixed, thanks for taking the time to write it. I'd suggest moving it to captivate general though. This is the development thread.
You didn't have a hard bricked cappy. You had a soft bricked cappy. A hard bricked cappy is when the primary and secondary bootloaders get corrupted, this also breaks download mode. You interrupted the odin process when it was at factoryfs, which is a long time after it's already successfully installed bootloaders.
The fact it booted right into download mode shows us that it had simply been soft bricked the whole time. This has nothing to do with linux, Kies had installed its own USB drivers that do not support the proper communication with the phone in download mode, this is why when you tried to odin it was being so fussy - it was using Kies USB drivers.
A simple removal of kies, installation of the correct samsung USB drivers, and plugging your phone into a different USB port even would have allowed odin to flash properly. This is why when you went into linux it worked right off the bat, because you didn't have kies and kies drivers in linux.
The captivate is far from immortal - I invite you to see what happens when you interrupt an odin session while it is flashing boot.bin and sbl.bin - you'll have yourself a real hard brick very quickly
fohdeesha said:
The captivate is far from immortal - I invite you to see what happens when you interrupt an odin session while it is flashing boot.bin and sbl.bin - you'll have yourself a real hard brick very quickly
Click to expand...
Click to collapse
believe it or not my cable got pulled out right in the middle of the factoryfs and since i cud still enter download mode i tried it again and then my power got cut in boot.bin part, and i was actually still able to boot into download mode even when nothing showed up on my screen, all i did was first pull the battery, hold the down and up volume button, insert usb into phone and insert battery, and somehow it booted into download mode according to odin, so idk the phone may not be invincible, but its close
fohdeesha said:
You didn't have a hard bricked cappy. You had a soft bricked cappy. A hard bricked cappy is when the primary and secondary bootloaders get corrupted, this also breaks download mode. You interrupted the odin process when it was at factoryfs, which is a long time after it's already successfully installed bootloaders.
The fact it booted right into download mode shows us that it had simply been soft bricked the whole time. This has nothing to do with linux, Kies had installed its own USB drivers that do not support the proper communication with the phone in download mode, this is why when you tried to odin it was being so fussy - it was using Kies USB drivers.
A simple removal of kies, installation of the correct samsung USB drivers, and plugging your phone into a different USB port even would have allowed odin to flash properly. This is why when you went into linux it worked right off the bat, because you didn't have kies and kies drivers in linux.
The captivate is far from immortal - I invite you to see what happens when you interrupt an odin session while it is flashing boot.bin and sbl.bin - you'll have yourself a real hard brick very quickly
Click to expand...
Click to collapse
And unbrickable mod fixes this. Therefore the captivate is pretty much immortal. You can even take a hard bricked cappy, do the unbrickable mod once it's already broken, and still have it return to working order.
Way say you now?
Arisenhavok91 said:
Way say you now?
Click to expand...
Click to collapse
What*
I would say of course JTAG'ing a hardbrick is capable of unbricking it, same for about any other device in the world with volatile memory based firmware. this is not a magical new discovery.
They aren't called hard bricks because they become impossible to recover, corrupting bootloaders is called a hardbrick because it takes HARDware modification to fix, not software utilizing the preexisting hardware. Anything else? Anyone else have some wonderful insider info as to how linux can make download mode magically appear? I'm loving the knowledge in here, really. If you're going to spread misinformation, we please ask that you do it in the correct subforum.
Of course, I argued that the Samsung Captivate is "immortal" due to it's ability to be resurrected at times when even a JTAG would fail.
So back to my point of you saying "the captivate is far from immortal" - what say you now?
Edit: If you can't take someone poking fun as such, please don't bother to respond. I won't look back at this even if you do reply, so please, take a chill pill... or some midol.
Arisenhavok91 said:
So back to my point of you saying "the captivate is far from immortal" - what say you now?
Click to expand...
Click to collapse
I would continue to say the captivate is far from immortal, in the same context as my original post you seem so excited to quote - in a software recoverable situation. We are not talking about JTAG and hardware modification anywhere in this thread. he was claiming the captivate is immortal in regards to all situations being software recoverable by magically switching to a different OS, if you could please put on your reading comprehension and context goggles the pieces of the puzzle might start coming together. Also, do not ask questions you won't bother reading the answer to. Thanks!
I say the captivate is pretty much inmortal! xD even without power button ive been using it with no problem and getting into DLmode.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app

System Software Not Authorized Error AT&T

Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
VaRMiT said:
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
rayburne said:
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
Click to expand...
Click to collapse
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
VaRMiT said:
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
Click to expand...
Click to collapse
So you bought the phone and it has never booted for you?
If you have MF3 bootloader on there and someone tried to install a custom recovery it could be soft bricked.
Not sure what to suggest if you don't know what occurred to cause the phone to only go into download mode?
You could take it to best buy with a samsung experience center and have them reflash it?
The only problem with this is if you don't have MF3 bootloader, best buy will flash it and upgrade it.....
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
rushi.1986 said:
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
When you mean MDL. thats the stock rom correct? I do have that. When I look at Odin, it doesnt show anything on the COM part at the top left. Like its hooked up to a com port.
What I meant by the Downloading ...... (with the driod logo guy) Im saying I can get it to do that. Im at the point where I cant get the S4 to be reconized by ODIN. I have the stock rom, odin 3.07 files. I have tried to install the samsung usb drivers....
Still no reply on how to fix this? I have no clue on what to do here. I dont know what firmware etc is on it. I bought it this way. I just want to flash it back to factory, its the att version. It only stays on when the usb is hooked up. I can get it to go into download mode. But on the computer, it doesnt show a usb device being found. I can start odin up, but nothing appears on the COM to show what com port is available. Is there anything I can do here off of a SDCard? I also need to mention that I can not hold down vol up and power and home button to get it to go into recovery mode. It flashes it fast and goes to the yellow triangle.
Anyone please.....
You need to get Odin to recognize it. Try different usb cables. Use the usb ports on the back of the computer. Try a different computer. Without knowing the firmware you're on odin may not work, but it should still recognize your device. If you're on mdl firmware Odin will work. If you're on mf3 then you're sol.
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Br4nd3n said:
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried the power, vol up and home. It flashes the recovery, then goes back to the triangle. Odin, doesnt show a COM port that the phone is connected when i have it in download mode.
Also....i do appreciate you all for helping me figure this out.

Categories

Resources