Hi, I recently corrupted the modem.bin on my samsung fascinate and have been having problems ever since. I finally restored my signal by installing a modem.bin, but still have a problem where I need to update my prl in cdma workshop. Whenever I try to connect to CDMA WORKSHOP in Diag. mode, it says Failed.. Could not read phone. Help pl0x.
Related
hello to all i have the sprint branded epic 4g and it is bricked i have done extensive reading and i have everything in place to return the phone to stock but the problem is when i start odin it doesnt reconize the phone and nothing happens i have tried starting odin and then powering the phone ibto download mode then hooking it to my computer and still nothing can anyone please help
PHIL2577 said:
hello to all i have the sprint branded epic 4g and it is bricked i have done extensive reading and i have everything in place to return the phone to stock but the problem is when i start odin it doesnt reconize the phone and nothing happens i have tried starting odin and then powering the phone ibto download mode then hooking it to my computer and still nothing can anyone please help
Click to expand...
Click to collapse
Go into your add/remove programs and uninstall the Samsung drivers
Redownload the drivers and reinstall them
Reboot PC
Start ODIN and THEN plug phone in
If all else fails trying swapping the USB cable
....in device manager the diag drivers and the port show up fine. I can connect with Odin in recovery and connect through ADB. I have another Tab (same model) and connects fine. Kies is installed and activated modem in diag screen and toggled. I uninstalled the drivers, wiped it back to factory and reinstalled the drivers and tried to connect again, but no luck. I can also read the sd card as well. Any ideas?
Reading some more...
....in other posts similar (which have no conclusions) it appears net.cdma.configurable.mode is set to "-1" and needs to be set to "1". Anyone know how this can be done?
a little more history into this issue; it happened after an meid repair and after I rebooted tab, were it once connected....it never did again. Anyone? Any clues or have i figured out a way to permanently turn this tab into a wifi only model?
Trying to enable AWS on Unlocked Rogers i337M.
Tried every possible thing but QPST does not see it on COM Ports. Phone was on NE1, I Odin Flashed it to NC1 but no use.
Tried different phones and all are recognized the second they are plugged in except this one.
A week ago I enabled AWS on the other i337M from rogers that was doing the same thing (Not being recognized by QPST) but can't remember what I did, that QPST started to recognize the phone and still does when I plug that phone in.
I would appreciate if someone could let me know how to make QPST recognize it. I've tried different computers, installed reinstalled Samsung drivers, factory reset phone, enabled disabled apps but no use.
Had same problem here...
BigBigBoss said:
Trying to enable AWS on Unlocked Rogers i337M.
Tried every possible thing but QPST does not see it on COM Ports. Phone was on NE1, I Odin Flashed it to NC1 but no use.
Tried different phones and all are recognized the second they are plugged in except this one.
A week ago I enabled AWS on the other i337M from rogers that was doing the same thing (Not being recognized by QPST) but can't remember what I did, that QPST started to recognize the phone and still does when I plug that phone in.
I would appreciate if someone could let me know how to make QPST recognize it. I've tried different computers, installed reinstalled Samsung drivers, factory reset phone, enabled disabled apps but no use.
Click to expand...
Click to collapse
Just type *#9090# and switch back to DM/DUN over HSIC... You probably switched it to DM/DUN over HS-USB when doing the unlock and forgot to switch back...
Cheers!
I had my device bricked by a failed update.
I had to force my phone in qualcomm 9008 mode to unbrick.
To enter qualcomm mode I short circuit the capacitors.
It is possible in this process to mess up the wifi?
I tryed many tools to get back the wifi. Non worked.
Thanks
To summarize when I put it in diag it connects and disconnects very quickly in the QPST, showing what it should, then esn 0 and then disconnected device, this flashing all the time, I assume it was after a corrupted .qcn, I wonder if you have some solution for that and that i can recover my imei and wlan.
Here what happened to get to this problem: my Chinese note 7 had a problem, I had to reset via edl for verified account and then unlocked the bootloader. Since the time I needed edl verified it has returned without wifi and without imei. I had managed to recover the wifi but imei it not through QPST, until I used it again and the cell phone went to Orangefox direct. I tried a new one. Qsn but the computer gave a problem, I ran out of backups and I can't connect anymore, always flashing between connected and disconnected devices, from time to time appearing what should be quickly.