Telechips opened access to the kernel source and android 2.1 - Android Software Development

Hi, I just wanted to share this post and link I found surfing the net looking to see if it would be possible to hack and mod a flytouch II. It says here that telechips just opened access to the kernel source and eclair build they use and sure enough I went to said website which is the telechips webpage and found two files the kernel and the eclair files in .tar.gz I will be totally honest i can flash roms without a problem but i am NOT a developer, all I can do is point people to what I find and help by testing ROMS if they become available, Hope some developer finds this useful and we can start building our own stuff from this.
Post with recognition of original person to find this goodiness
w w w . pandawillforum. com / viewthread.php?tid=2303
direct link to the telechips download webpage
w w w . telechips. com / technical_support/kor/opensource/opensource_list.asp#none
Now since I didn't know if like it happens all the time the site, or section or files go missing I downloaded them and kept 2 copies at diferent sites. If the above link fails let me know will post files for you guys. Now I have two questions and I hope all the people who read this can give me a answer.
1) Is this enough to start making customs ROMS?
2) If the above answer is no, what else is needed?

Related

Virtual com port source

Hi,
I tried to download the virtual com port source from http://mamaich.kasone.com/rover/RIL_hook.rar but apparently the site is down for the time being...
Did someone manage to download it while it was still available ? If so, could you please upload it here (or make it available somehow)?
Thank you.
There is another virtual com port driver available here
http://sf.net/projects/gpsproxy
Nice project, but it seems C# and uses the CF. I was looking for something in pure C... perhaps I can get inspiration and hack my own.
Perhaps you should ask the guy, which discussed and downloaded original to upload the current version and his experiences with it.
http://forum.xda-developers.com/viewtopic.php?t=10334&highlight=virtual+com+port
For me it seems, that you can take the DLL, referenced it the first answer to your thread, - modify the registry and WinCE will use it as newley available COM-Port.
(I will follow it too ! )
I tried to contact mamaich. lets hope.
my site is temporary down.

Researching Linux / Android ROM

Hello everybody,
I'm Johan, I live in the netherlands and i'm doing a study Informatica->Software Engineer. For a schoolproject we have to write an Android Application, though i don't have Android running on my telephone natively. So i searched the internet and found out that on the XDA forums its all about custom roms and that there are some Android Roms available. Unfortunately nothing for my MDA Compact/HTC Magician yet.
After asking arround a bit and searching all over the internet I figured nowone actually was bothering to further investigate Android for Magician.
So even though I have no idea if it will ever gonna work i'm gonna try to document as much as possible, and I hope others might join this topic and give some (usefull!!) feedback.
These websites I think are the best place to start, as I don't have any experience with ROMS or Android-OS its gonna be a challenging task but if you guys have any idea's, suggestions or websites where we can find more information feel free to post comments.
Startpage for Magician info:
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
HaRET bootloader working on magician:
http://www.handhelds.org/moin/moin.cgi/HaRET
http://www.handhelds.org/moin/moin.cgi/HaRET_20Documentation
Linux kernel for Magician:
http://www.htc-linux.org/wiki/index.php?title=Kernel#Kernel_for_intel_PXA_based_devices
Current status for linux kernel:
http://wiki.xda-developers.com/index.php?pagename=MagicianProgress
http://www.handhelds.org/moin/moin.cgi/Magician
Source code for Android:
http://source.android.com/
How to build Android OS:
http://source.android.com/porting/build_system.html
Compatiblity test suite:
http://source.android.com/compatibility/cts-intro.html
Any feedback is apreciated but please don't make it like "nice, when is it finished?" or "its impossible!"
as I have no idea about both of those 2 comments yet, I'll have to figure that out on the go.
It should be possible, someone already ported android to pxa270!
http://www.mask.org.tw/demo.htm
need to throw in a kernel guess i ll fetch yet another magician if that happens!!!
Hi header2k and evildarknight, thanks for the input.
My chinese/tw isn't to good, so i googled for android and pxa270 and found the following website, no idea if its any usefull (currently not at home, and my datalimit on my laptop dislikes downloading 1,3GB so i'll have to see what it is when i'm at my desktop again.)
http://www.ntut.edu.tw/~wyliang/
This looks interesting, if it comes to testing, you can contact me!
guess my chinese aint better
can't somebody anybody compile the android froyo kernel 2.6.32 for the magician which seems to be inline with ph5 dev???
I can't read chinese either, but i wanted to link to the pdf files:
http://www.mask.org.tw/data/Android_Porting_on_PXA270.pdf
http://www.mask.org.tw/data/BringUp_Android_on_PXA270.pdf (he used files from: svn co https://android-pxa270.svn.sourceforge.net/svnroot/android-pxa270 android-pxa270 )
He uploaded his work, too(with two mirrors, after 原始碼 (1.3GB) 下載位置: )
His machine:
[email protected] <-- identical with our magician
64MB RAM <-- identical with our magician
32mb ROM <-- Isn't important because he used an external usb-stick with chroot - We can use our sdcard and haret
Toppoly TD035STEB1 <-- identical wth our magician
Setting up Dev-Team
So this proves i guess its a done deal already
But is it then just theoretically/closed project? or did he indeed release his sourcecode as well? Sourceforge SVN shows there isn't anything deposited.
Anyway, still want to use this on my telephone, no idea what it takes to use/modify his work. Anyone interested in actually joining the project-team to make it run on a telephone? cause in the pics in the powerpoint i see some laptop and some mainboard and touchscreen but not a MDA Compact/HTC Magician yet.
There are copies of the project www.mask.org.tw/data/release-sourceforge.tgz and www.ntut.edu.tw/~wyliang/release-sourceforge.tgz. I don't have access to a linux box at this moment. Need to fix my PC before working on android.
Hello, This is Mask from http://www.mask.org.tw
Hello, I am Mask and I found there are some traffic from xda-developers to my website, so I come here and found there are some discussion of my work before in last year.
I had open an android project for pxa270 on sourceforge, but I didn't know how to upload my source code to sourceforge, so I put the source code on my website and mirror sites.
I hope maybe I could help you if you are interest in "android porting" and some related topics.
mask.chung said:
Hello, I am Mask and I found there are some traffic from xda-developers to my website, so I come here and found there are some discussion of my work before in last year.
I had open an android project for pxa270 on sourceforge, but I didn't know how to upload my source code to sourceforge, so I put the source code on my website and mirror sites.
I hope maybe I could help you if you are interest in "android porting" and some related topics.
Click to expand...
Click to collapse
Yes, i have a question. Do you have a pxafb.c driver that works with android and the 2.6.32 kernels?
sorry about that I have no time to maintain my android project for pxa270, and now I have no plan to keep to maintain it, maybe we could upload whole developing source code including all svn reversion from begin to now, do you know how to import svn to sourceforge ? thanks a lot.
Here is some information on SVN and sourceforge.
http://haacked.com/archive/2006/02/22/QuickstartGuidetoSubversiononSourceForge.aspx some older howto from 2006 not sure if its up to date
http://sourceforge.net/apps/trac/sourceforge/wiki/Subversion Official sourceforge howto.
http://tortoisesvn.net/ svn client
Kernel
Can someone test this kernel and see if it works as I do not have a magician to test it with.
If it does boot can you follow the steps posted here to see if android boots...
http://forum.xda-developers.com/showthread.php?t=658664
notime2d8 said:
Can someone test this kernel and see if it works as I do not have a magician to test it with.
If it does boot can you follow the steps posted here to see if android boots...
Click to expand...
Click to collapse
I try to use kernel on Qtek S110(WM 6.1 by Cotulla), but get freeze screen on line "Jumping to Kernel...". When i use zImage from thread "Android 1.5 Cupcake on Universal" - again freeze on line "Jumping to Kernel...". Any ideas?
If you need to test something on Magician, contact me by ICQ 258113792.
Pavel A Safonov said:
I try to use kernel on Qtek S110(WM 6.1 by Cotulla), but get freeze screen on line "Jumping to Kernel...". When i use zImage from thread "Android 1.5 Cupcake on Universal" - again freeze on line "Jumping to Kernel...". Any ideas?
If you need to test something on Magician, contact me by ICQ 258113792.
Click to expand...
Click to collapse
Make sure you have the radio turned on and not in airplane mode and wifi and bluetooth turned off. Also the correct machine type 875 in the startup text file or 855 if using the one for the universal.
i think set MTYPE 875 should be the right one
notime2d8 said:
Make sure you have the radio turned on and not in airplane mode and wifi and bluetooth turned off. Also the correct machine type 875 in the startup text file or 855 if using the one for the universal.
Click to expand...
Click to collapse
When radio is turned on, Linux loading and stop on next lines:
1. With kernel for Magician
...
mmc0: new SD card at addess 41a8
mmcblk0: mmc0:41a8 SD01G 982 MiB
mmcvlk0: p1 p2 p3
Waiting for root device /dev/sdb2...
I wait more then 5 minutes, but nothing happens.
2. With kernel for Universal
...
ds1wm: ds1wm: reset failed
Device vibrate all time and after last line turn off display.
Pavel A Safonov said:
When radio is turned on, Linux loading and stop on next lines:
1. With kernel for Magician
...
mmc0: new SD card at addess 41a8
mmcblk0: mmc0:41a8 SD01G 982 MiB
mmcvlk0: p1 p2 p3
Waiting for root device /dev/sdb2...
I wait more then 5 minutes, but nothing happens.
2. With kernel for Universal
...
ds1wm: ds1wm: reset failed
Device vibrate all time and after last line turn off display.
Click to expand...
Click to collapse
Ok, don't use the universal kernel, from what you posted it seems that the kernel is not pointing to the correct memory card path in the startup text file or try reinserting the card.
If anybody knows how to build kernels i can provide the files and walk them through how i built the kernel for the universal which i have just gotten a very slow and unusable eclair (mostly due to hardware) working. I think this is the most i can help out as i don't have a magician.

Alternate download location for ROMS

Alas, I cant post in Dev threads yet (no enough posts), I have to create this thread.
Is it possible to get alternate download locations for ROMs. I have been frustrated recently, having tried to download ROMs just for it to terminate at rought 90-90% and give me a error with a link timeout or similar error.
Not all of us have super-fast boradbands and we will appreciate it if ROMs can be uploaded to locations with resumable and multi-threaded downloads. Else, might as well just give up on Android
You tried to PM the Devs? Just because you can't post in the Development section doesn't mean your PM's don't work.
Also most popular ROMs have alternative "Mirror" links. Just search within the thread to find them.

Firmware development LGP698 - LG Optimus Link Dual Sim

It will collect useful information for developers.
This theme will help us to work together and to finally workable firmware for our animal.
We kindly request all the people who will be able to find a device with a processor with us and with the support of two simkart inform us
here are the results of our work
I say in Russian user, but my goal - to attract users to develop firmware
already made ​​several firmware versions
they were later executed and lay out the themes
If you like my work - please do not forget to say thanks!
In the course of communication will complement the topic.
request
reference for those who want to do our mite to launch network cyan7)
can ask for help in other subjects firmware devices, owners of which you were
than now to start a screeching halt with the network?
the same problem with port Leva ....
Need deodeks stock firmware files from the \ system \ framework
attempt № ...
So, what should be done next?
deodeks the \ system \ framework
this deodeksom run any of custom assemblies
deodeks will be used to launch a network of cyanogen
how? Step 1
through any deodeksator deodeksatsiyu do with API 10 - will necessarily be an error!
note on what files they are
the files that go with errors - remake with API 9
this deodeksom run any of custom assemblies
If that fails - Step 2
through any deodeksator deodeksatsiyu do withAPIs 9
this deodeksom run any of custom assemblies
this algorithm deodeksa other devaysakh with android 2.3. * and port drivers
put the logs of the work done for the analysis!
and if successful, run any custom firmware files with deodeksirovannymi - in enclosure attached archive folder deodeksirovannoy
Go for it! our success!
is one of the results http://forum.xda-developers.com/showthread.php?t=2108595
Custom firmware
To install over rekaveri
alex-rev.1​
will soon publish the second
is one of the results http://forum.xda-developers.com/showthread.php?p=38062197#post38062197
Custom firmware
To install over rekaveri
[email protected]​
Thks for yr rom. I am using rev3. This is great rom. But i dont like mui home.i chsnge to go launcher.it is smooth. Everythings is ok
Sent from my LG-F160K using xda app-developers app
larrylong said:
Thks for yr rom. I am using rev3. This is great rom. But i dont like mui home.i chsnge to go launcher.it is smooth.
Click to expand...
Click to collapse
trying to eliminate defects....
some of my build here is not lined
You can view the complete list of work here - http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19780784
http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19798091
here you can find answers to frequently asked questions
and solutions to the many problems
here is not often )
constantly on the Russian forum http://4pda.ru/forum/index.php?showtopic=294336
write in the subject - I will try to help
there can follow the news of assembly and firmware
Start new topic
decorations - http://4pda.ru/forum/index.php?showtopic=426426&view=getnewpost
This may be used http://translate.google.com
adding input languages ​​in the firmware
wrote here http://forum.xda-developers.com/showpost.php?p=39202141&postcount=12
is one of the results http://forum.xda-developers.com/showthread.php?p=39298288#post39298288
Custom firmware
To install over rekaveri
Nahim2k7-update​

[Request] Toshiba Portege G910 / Original Firmware !

Hello Xda Users.
I am releasing a Windows Mobile ROM.
The device I've worked on is the Toshiba Portege G910
(probably many of you will remember my numerous questions in this forum. )
and..... Finally, after "years of study" I'm doing it.
The ROM si ready on my PC, but I still need an original (stock) ROM for this device, otherwise the new Rom won't work properly and I couldn't add very important apps to it (as for example the camera...)
A long time ago I found Stock Roms on the Toshiba website.
But now the link is not avaible anymore.
Please, can anyone upload for me (on any website) an original/stock ROM for this device?
P.S.
I also remeber that, a lot of stock ROMs for the G910, were stored in the forum section of "www.4pda.ru" but this website is in russian language and it's totaly understandable for me, even if I try to translate it.
Please, can any russian man simply search the stock ROM for me?
If you help me I will include you and your profile/website in the credits of this project
(Soon the Rom will be avaible here and on my website)
It seems to me that the official firmware isn't in the "4pda" forum, I found 2 links in another website (it's always russian...)
But the file has been removed by the File-Hosting service,
so...
my last hope is that some "ex-Toshiba-G910" owner stored it in his old Hard-Drive or PC... (please help)
For Toshiba :
I understand that so many years have passed, this phone is totally discontinued and of course you don't offer new support... But, why on earth do you eliminate even the old support already provided ?!?!
Update:
After spending hours for search it, Finally I found a working link to download this Stock Rom (required to make an updated one)
http://www.vitorrentz.cc/torrent/5705e027e0023749a584323e5061bca63bcb5fcb
I started the download but the speed is about 0.0 kbs/sec...
Why? Users, Could you just try if it works?
Maybe the download will work outside my country ...
How about this?
Removed - It was malicious, sorry
ReDorDeD said:
How about this?
Removed - It was malicious, sorry
Click to expand...
Click to collapse
Hello Redorded! I have just seen the message!
I really Thank you for the !
Does your link was a Torrent or a File/sharing Download?
Anyway it's very hard to find this Stock rom but not impossible.
In fact I found 2 guys that have it but I can't see their e-mails because I can not use a site in russian!
Maybe... Do you speak russian??
Do Anyone have an account on "4pda" or on "unlockers.ru" ??

Categories

Resources