Related
The Devs are stating that the leaked JI6 is identical to the OTA JI6,, but my GPS only works with the OTA JI6, if I flash or Odin the leaked JI6 my GPS stops working....
Am I crazy?
Market is different too
eortizr said:
The Devs are stating that the leaked JI6 is identical to the OTA JI6,, but my GPS only works with the OTA JI6, if I flash or Odin the leaked JI6 my GPS stops working....
Am I crazy?
Click to expand...
Click to collapse
I definitely observed some differences in Market..
I updated through Kies Mini and got the market app that had update all button on it. The ODIN JI6 update didnt give me that.
eortizr said:
The Devs are stating that the leaked JI6 is identical to the OTA JI6,, but my GPS only works with the OTA JI6, if I flash or Odin the leaked JI6 my GPS stops working....
Am I crazy?
Click to expand...
Click to collapse
So if the OTA works why do you care about the ODIN version?
Well I tried both and the OTA seems to be more stable so far. The Odin JI6 was not working all that good. I was getting a lot of lag and just was not functioning correctly.
There are Market apps missing on both.
I would recommend using Kies to get the OTA. Not odin.
Sent from my SGH-T959 using XDA App
Which devs are saying this? The leaked JI6 that came out before is NOT the same as the OTA. If you are talking about the Official JI6 that we are flashing via Odin and Kies, then yes, they are the same.
To clarify, when you say "Leaked JI6", this refers to the version of JI6 that was discovered before we even knew there was going to be an OTA update. After they found out about the OTA and it started rolling out, they found the final version of JI6 and made it available to flash.
So please be more specific in which you are referring to.
The actual old leaked JI6 or the JI6 people are flashing via Odin and Kies.
I updated through the odin official file first then went back to stock JFD and flashed through kies. I don't have the new market from the kies version and still can't see all the apps. They are both the same file according to the build.prop anyway.
tornado76 said:
I updated through the odin official file first then went back to stock JFD and flashed through kies. I don't have the new market from the kies version and still can't see all the apps. They are both the same file according to the build.prop anyway.
Click to expand...
Click to collapse
They probably got the new market before they realized the difference.
Doesn't Kies wipe data? The Odin update doesn't do that.
By "wiping data" what do you mean? You lose all of you videos, photos, settings, etc.?
heygrl said:
They probably got the new market before they realized the difference.
Doesn't Kies wipe data? The Odin update doesn't do that.
Click to expand...
Click to collapse
I was thinking the same about the market.
I honestly can't remember if odin wipes data or not since I've flashed so many times plus when I flash I always start out fresh anyway.
You will lose your settings and apps. Photos and videos no since they are stored on the internal SD card. Basically anything that is not on the internal SD card will get erased which is which people use Titan to backup all their apps before they flash a new rom. It's easy to restore all your important apps to their previous state this way.
I flashed the Official JI6 OTA with Odin and have had no issues at all. It didn't wipe anything either.
i flashed the leaked JI6 with odin and then flashed the OTA with odin when that came out. GPS was improved over JFD with leaked, but not great. with the OTA version, it's significantly better for me. haven't noticed many other differences, except battery readings are a little odd (reads 100% when connected to charger -- after charging for sometime -- but drops to 75% or so within minutes of disconnecting. weird. same issue with leaked version).
kangxi said:
Which devs are saying this? The leaked JI6 that came out before is NOT the same as the OTA. If you are talking about the Official JI6 that we are flashing via Odin and Kies, then yes, they are the same.
To clarify, when you say "Leaked JI6", this refers to the version of JI6 that was discovered before we even knew there was going to be an OTA update. After they found out about the OTA and it started rolling out, they found the final version of JI6 and made it available to flash.
So please be more specific in which you are referring to.
The actual old leaked JI6 or the JI6 people are flashing via Odin and Kies.
Click to expand...
Click to collapse
I'm talking about the JI6 that was leaked about 2 weeks before the official OTA... Bionix and Viral are stating that they are identical
eortizr said:
I'm talking about the JI6 that was leaked about 2 weeks before the official OTA... Bionix and Viral are stating that they are identical
Click to expand...
Click to collapse
If sombionix and viralblack say it is so, I'd say it's 99.999999999 so.
ShinyBuddha said:
If sombionix and viralblack say it is so, I'd say it's 99.999999999 so.
Click to expand...
Click to collapse
That only problem with that statement is that it is incorrect. The build.prop of the OTA dates 09/28/10 while the leak has a date two weeks prior. So, even if something very minor was changed, they are not the same.
I flashed the official release via Odin, And when I connect to KM, It verifies my model number and phone number and shows that I am running latest version. I can say That these two are the same.
Hello.
I just updated Kies to version 1.5.3.10103_102, and the Tabs firmware is JJ3. This seems to be a problem, cause the previous version of Kies connected to the tab with out problems - but not this one. My phone (Galaxy S) is able to connect to the newest version, so I assume it's narrowed down to a problem between the tabs firmware version and the Kies version. Searches done in this forum gave no results as far as I could see, but I doubt no one else has experienced this?
Is there a known fix? And what is the newest official firmware released through Kies for the Galaxy Tab? I couldn't get an upgrade when I tried, but experience tells me I wouldn't get it anyways since i didn't run the latest version of Kies. I live in Norway, if it makes any difference.
I'm very sorry if I missed a similar thread,
Thanks alot in advance for any help/input.
Edit: I should add that I actually tried connecting the tab to an older version of Kies on another computer, wich worked. When I updated this computer as well, it wouldn't connect. Just to make sure that this was actually a Kies problem.
I had the same issue, had to reboot the galaxy tab after updating Kies and it then worked ok.
On the same firmware as you also JJ3, and been looking around for best firmware to update. A lot of discussions on JMD, JMC and JMA but all appear to be based around ATT and T-Mobile devices, so I am a little cautious to do anything myself yet.
p.s. Also on same Kies as you, reports already on latest firmware
A reboot doesn't seem to fix it here, unfortunatly Wonder why Samsung sticks to Kies, must be the worst piece of software I have ever been "forced" to use, and that includes Itunes
But if JJ3 is the newest firmware (I could have sworn someone was writing about a version called JJ7?) I can just wait and see what happens.
Personally I'm also sceptical of flashing any unofficial firmware as of now, doesn't seem to be all that safe? Just to afraid to end up with a 7" brick
Jj3 is the latest for xeu tabs
Sent from my GT-P1000 using XDA App
I'd updated the Tab through Kies and now is JJ7
Sent from my GT-P1000 using XDA App
Is yours a xeu tab
Sent from my GT-P1000 using XDA App
What classifies a XEU-tab?
Edit: My fw is XWJJ3
Sent from my GT-P1000 using XDA App
Look in regedit under kies devices there is a string there
Sent from my GT-P1000 using XDA App
Same frustrating problem
I'm having problems getting Kies to find my Galaxy Tab too. Mine is a SPH-P100 (Sprint). Kies either says it can't connect, and to reconnect in "PC Studio mode" (which I can't find ANYWHERE, or it hangs at "CONNECTING DEVICE please wait" to no avail... I've tried booting into DL mode, and into recovery, and NADA... Please advise?
I was thinking I was gonna' root and flash Roto, but I dunno now... I can't even get a software that's MEANT for the Tab to work...lol
same as previous poster
I have same symptoms, can anyone point me in the right direction ?
I think I got it...
OK, just to clarify, I'm on a Sprint Galaxy Tab, SCH-P100...
After reading a TON of different forum's posts with no help at all, I started playing around with some settings, and after tapping and tapping, I MAY (I repeat) MAY have figured it out.
It seems as though all you need to do is set your Tab to USB debugging selected before you plug it into your machine to try and get Kies to read it.
Settings~> Applications~>Developement~>Select USB debugging
Plug your Tab in, and see what happens!
My result was a bit dissapointing, as it FINALLY connected, but says I have no updates available...lol Don't know if there's another setting that needs some tap action, but at least it's now connected, right?
Best wishes for at LEAST a connection between Kies and your Tab!
But the interesting thing is that I already have KMM 3.2 on my rooted tab.
Also of interest is that NOW the fus servers are showing this
Last modified:
2011-11-19
Latest firmware:
P7510UEKMM/P7510XABKMN/P7510UEKMM/P7510UEKMM
Version:
Android 3.2
where as before they would show the KME version..
(before as in yesterday!)
So has samsung fixed the delivery process??
am not going to upgrade because i believe this KMM is the same as the KMM i flashed via odin from sampro.pl
I got an update using Kies today. Looks like the one you posted. I didn't have any problems with the first 3.2 update and doesn't with this one either.
When I get home ill see if there's any difference :-D
Sent from my GT-P7510 using Tapatalk
How come Kies on your Mac supports firmware upgrades? Mine says firmware upgrades are not supported for GT10.1.
Anyway it's seems that again 3G users (that actually paid more money to Samsung) have been left behind with no update That's so Samsung...
I got an upgrade for kies
Sent from my GT-P7510 using Tapatalk
go ahead and update. All is good. sammy fixed it and pushed it out yesterday, even the OTA is fine. But it will take a few minutes, around 35-40 to complete the installation. make sure you have full battery before you do it if doing it via kies, if OTA keep it plugged in to the socket...Just in case.
I got a update via kies today to but it doesn't seem to have been the 3.2 version as in the system information it still says 3.1. I've tried looking for a update again but it says I already have the latest firmware so I'm a little confused.
FC360 said:
I got a update via kies today to but it doesn't seem to have been the 3.2 version as in the system information it still says 3.1. I've tried looking for a update again but it says I already have the latest firmware so I'm a little confused.
Click to expand...
Click to collapse
you are probably using a non US rom...
flash via Odin i say..is more reliable
To be honest I'm not into the whole custom rom stuff because I always muck something up
That is correct I am in the UK so I assume I am using the UK rom which according to another thread on here the 3.2 update isn't available here yet which explains it hehe
Or is it me?!
Very fast intraOS movement. Browser also seems plain faster.
System and call sound better also.
rockky said:
Or is it me?!
Very fast intraOS movement. Browser also seems plain faster.
System and call sound better also.
Click to expand...
Click to collapse
I've got the Sheep ROM.
How would I go about getting and installing this? I can't do OTA upgrades because they don't come because I have a Custom ROM.
I can't do Kies, because it says it can't do SW updates.
Are you using a Custom ROM?
I wiped all (which you must do if coming from an odex'd rom) and installed Cassies V4 Rom with the new build and modem....then Abyssnote kernel?
Even without kernel...you can tell right off the build is a big stepup.
Don't think I answered your?
There's a thread in Dev section that has the link to the files
http://www.multiupload.com/8P1M2BGMXY
You can put on your phone and flash from recovery.
QUOTE=les_garten;20433640]I've got the Sheep ROM.
How would I go about getting and installing this? I can do OTA upgrades because they don't come because I have a Custom ROM.
I can do Kies, because it says it can't do SW updates.
Are you using a Custom ROM?[/QUOTE]
This soft is an improvement. It's far from satisfactory( android is still choppy as hell comparing to other OSes) but it's a step in the right direction.
I can report a better Wi-Fi range - I'm getting signal in some places in my house where I couldn't before.
No choppiness here...thing flies.
Does stock browser power saving levels works (any change in screen brightness)?
For me it worked well in KKA but not in KL3 .
Please test this for me.
Thank you.
ADW is still a bit sluggish, I'm using Cassie's KL3
PickleHead said:
ADW is still a bit sluggish, I'm using Cassie's KL3
Click to expand...
Click to collapse
If you change the cache to low quality it won't lag at all.
Sent from my GT-N7000 using XDA App
KLx series has problem with STK. I always get FC with my STK film. But I do not have any problem with KK1.
Confirmed. KL3 feels a bit faster.
This update has made a massive difference for me. I'm using ADW and widgetlocker and the phone now feels properly connected to my inputs on the screen, lag is pretty much gone. Much happier with the feel of the phone now.
I flashed through CWM and installed CFroot kernel for KL3 at the same time.
This things screams compared to KKA. I lost pinch to zoom in my Gmail Client. Anybody have any ideas about that?
Is this an update that we will get OTA? And what region are you guys in?
Sent from my GT-N7000 using xda premium
LordManhattan said:
Is this an update that we will get OTA? And what region are you guys in?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi LordManhattan,
When I tried OTA, it says that my software is up to date. But when I connected my Note with Kies, it told me that there is a KL3 update. (From the Philippines but currently located in India).
For the record, I havent updated the software yet. Will do so by the weekend.
Updating via Kies
Question:
How do you update GNote via Kies? Is it through Kies Air? If it is through Kies Air, how? I do not see any Check Update button.
Or do I need to connect my Note to my computer via USB?
Thanks!
allansy said:
Question:
How do you update GNote via Kies? Is it through Kies Air? If it is through Kies Air, how? I do not see any Check Update button.
Or do I need to connect my Note to my computer via USB?
Thanks!
Click to expand...
Click to collapse
Ensure USB debugger is off, connect phone via USB. Launch kies. Wait for pop up. Check if you have the latest Kies if needed.
Damnit. Running Ubuntu, so no Kies for me. Anything else i can do?
Sent from my GT-N7000 using xda premium
i cannot see the KL3 update over OTA , neither with Kies for windows , i bought my galaxy note in switzerland , KKA firmware.
anyone else in europe got the KL3 update ?
no kl3 italy
same problem here no OTA and no kies.. been checking constantly.. lool...
i think its only india that have the update...
so i guess if we want it we just have to flash.....a rom from here
For peeps that didn't use the UK version, I just looked at my tab and noticed I had the message.
bbeelzebub said:
For peeps that didn't use the UK version, I just looked at my tab and noticed I had the message.
Click to expand...
Click to collapse
Have you managed to download it, and verify if you got ICS ?
I was chatting online with Samsung support about the availability of the download, and checked checkfusdownloader while I was online and founf the update - but the support person says it is not an ICS update. I hope they just don't know what they are talking about.
Visitor: Product Code: GT-P7510UWCXAB Latest firmware: P7510UELPL/P7510XABLPL/P7510UELPL/P7510UELPL Modified: 08/08/2012 10:54:47 Filename: GT-P7510_XAB_1_20120808105431_sr3nx29c5t.zip.enc2
Visitor: Can you please tell me if this contains 4.0.4 - or is it just another 3.2 update
Smith: Its just a update to the version you have on the Tab.
Visitor: containing what exactly ?
Smith: We do not have the information on the update as it is through air.
Visitor: so it could be 4.0.4 then - you just don't know
Smith: It is not 4.
Click to expand...
Click to collapse
EDIT: sammobile have it uploaded now - so it looks like it is finally here ... now if only I had my TAB with me
Oh, sorry for the delay. It took a while to download and then I was playing with it.
For those curious:
Build Number- IMM76D.UELPL
I must say, This thing runs soooooooooooo much better. It also feels a bit more cohesive with my SG3. I think I'll keep it stock for a while. Also, I notice I can uninstall the bloat they included with it originally now. Not just hide, but remove Amazon, Kindle, etc. crud that I don't think I could before. Would be nice to add smart stay, Allshare Play, and face unlock eventually. I'm a little spoiled with some of the things on my SG3.
Downloading it now. US/TN.
Same its downloading now
Just did the check update on mine and also got the upgrade box. 254.01MB
danlo said:
Does the update wipe the device?
Click to expand...
Click to collapse
No, i just installed the update via OTA. Did not wipe device, however you will lose your homescreens if you are using the native TouchWiz launcher.
Checked mine a few hours ago, got update available.
Did a reset for a clean update.
Now when I check, no update available.
Checked my wife's tab, same thing, not available.
Checked some other forums and some are also getting not available.
Could Samsung be staggering the update to keep the servers from getting overloaded?
I just checked for update on mine and no update is available.
Is anyone else getting "Your device is not compatible" with Chrome? What the hell? It's 4.0.4
edit:cleared market data and it's available
If you are not seeing the update try hooking up to Kies
Sent from my GT-P7510 using XDA Premium HD app
Did anybody get an OTA update?
Is ICS coming OTA or via Kies? I live in Mass. and as of 11:30 a.m. on 8/13 my tab says there is no update available. I rather not have to bother with Kies, so I'll wait awhile longer.
^My update notification popped up as soon as I unlocked my Tab this morning.
I've been stuck on stock due to lots of ffc use, and thank Christ the keyboard lag is fixed. It's like a new tablet.
Any advantage to going from the UK version to the US version? I live in the US, but flashed the UK version a while back... is there even a difference?
Just my luck, android 4.0 for the tablet is released and suddenly kies stops working and won't recognize my tab, and i also get "No update available"
I plugged it into my computer and the update was available through Kies. Took about 30 minutes for the update to complete, and so far I am liking it.
I have the US GT-P7510 flashed with the ICS 4.0.4 UK version, is it possible to install the US ICS over the UK version using Odin, or do I have to rollback to HC 3.2 then flash this new ICS?
ok its official ICS IS HERE, i was using custom roms but then decide to go to stock i was using ROM HTJ85B.UEKMP i try to use the update from within the tablet but did not work as soon as i connected the tablet to kies bam updating and now its official ICS is here, after the update everything just ran by itself no need to clear nothing. pass the word around and if anyone has the ability to actual rip the whole rom off please do so cause i know for many kies does not work. it was a long wait but its here
I gave up on the OTA update as it has said no update available all morning. Currently connected to Kies and performing the upgrade. Crossing my fingers everything goes smoothly.
valgaav said:
I have the US GT-P7510 flashed with the ICS 4.0.4 UK version, is it possible to install the US ICS over the UK version using Odin, or do I have to rollback to HC 3.2 then flash this new ICS?
Click to expand...
Click to collapse
dont know about flashing over but if you want search in the GT10 forums and look for stock rom HTJ85B.UEKMP once you do that through odin reboot the tablet then connect to kies and you should be ok. thats what i would do hope this helps cause that what i did and everything worked fine for me...