Database Users

Flashing Problems

Hey guys,
I have been trying to flash my Samsung Vibrant for a few days now with no success. I rooted the phone using superoneclick, then I clicked on Axura's link on android development section to get Axura 2.3.1.2. I followed the video posted by the dev to install the new Rom. It stated to use OCLF, then use Rom manager to install the app.
Well I went into Rom manager installed clockworkmod recovery 2.5.1.2 I believe it was. Then I click on install Rom and it asked if I wanted to backup current rom and wipe cache. I checked both and hit okay, the list came up where I had Axura installed on my Sd I clicked that......it said phone will reboot into clockworkmod recovery to load, after that is when the problem starts. It automatically goes into Samsung recovery i select reinstall packaged and get error e: signature not verified.
I have tried to get into recovery manually by holding vol -+ and power but still loads into samsung recovery not clockwork. Has anyone ran into this problem before?? I've searched all over the forum and google and could not find any info to help me with this. I really would like to install some custom Roms to try them out.
Thank you very much in advance to anyone who can help. I tried to be as specific as I can with the problem but if you guys need more info I can give more. Thank you

Have you updated to 2.2 already? The official 2.2 comes with a new recovery version, that causes problems with CWR.
If you had upgraded, odin back to 2.1, then root and flash a custom firmware from there. I recommend Bionix V 1.3.1, it is pretty beast.
Sent from my SGH-T959 using XDA Premium App

jamesd86 said:
Have you updated to 2.2 already? The official 2.2 comes with a new recovery version, that causes problems with CWR.
If you had upgraded, odin back to 2.1, then root and flash a custom firmware from there. I recommend Bionix V 1.3.1, it is pretty beast.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I upgraded to 2.2 Froyo with Kies Mini couple of weeks ago. I was tired of waiting for it and thought it was going to be a big improvement over Eclair but didnt notice anything except losing my MMS messaging!
Is there any way to do it with Froyo before I Odin back to Eclair?
Thank you
rhonal89 said:
I think you need to reflash pick the vibrant out of the list and when superuser pups up click ok.
http://forum.xda-developers.com/showthread.php?t=734164
Visit www.tomorrowisnews.com For Android news and more.
Click to expand...
Click to collapse
?? I'm sorry I'm a noob to all this so I may not be understanding the quick terminology. Thank you for your response.

Therr is a thread im the dev section on how to modify the recovery but tbh its easier to odin and start the process over...it's not like you weren't going to habe to wipe the phone when you flashed custom firmwares.
Sent from my SGH-T959 using XDA Premium App

Help Need Lots Of Help!!!!

ok so my samsung vubrant i was installing a rom called nero gingerbread edition i had installed it already but i wanted it to be my permenant one so then i put it in recovery and i put install zip then i clicked nero then i had to approve and i did and then all these commands popped out then it said looking for upadate.zip which i have because i never deleted it and it just froze its been like that like for an hour and i need help really bad because i do not want my phone to mess up please just answer pleeaaaaaaaase

Sound like you just need to Odin back to stock and try again
Sent from my SGH-T959 using XDA Premium App

i did not use odin to root my phone i just added the update package but can i use odin still if i did not use it to root my phone

Yes u can Odin back to stock and then flash cwm and your good to go
jadenrodriguez said:
i did not use odin to root my phone i just added the update package but can i use odin still if i did not use it to root my phone
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA Premium App

jadenrodriguez said:
i did not use odin to root my phone i just added the update package but can i use odin still if i did not use it to root my phone
Click to expand...
Click to collapse
The toobox works real well.
http://forum.xda-developers.com/showthread.php?t=954509

Jaden, Odin back to stock (look in the Noob guide by S14274N) it has everything you need, Once you are in stock , then root the phone (use superoneclick, it is easy), then download Rom manager, then you will go back into download hit update packages and it will be rooted, From there you can flash any rom you want. Your phone is ok, you need just to go into Download and Odin back to stock first.

You probably can just restart your phone, don't think any changes were even made...long press the power button until it restarts.

Hahaha no offense and not trying to troll but guys please ODIN before any flash of rom, kernel, mod,theme, anything. That way you dont flip out when **** goes wrong. I did,so do many other flashers, and so should you pr anybody else. Also, do a backup with recovery before flashing....
Sent from my SGH-T959 using XDA App

I really hate to be that guy, but please use periods or any other form of punctuation. I came into the thread wanting to offer advise and about a line into the post I realized it was all one big sentence. I gave up.

not to be a d*ck but why do you have a donate to me button?

emonero said:
not to be a d*ck but why do you have a donate to me button?
Click to expand...
Click to collapse
I have seen that a lot with ppl with low posts. I guess it doesn't hurt to try lol

Odin to stock before every new ROM flash is overkill...

Sdobron said:
Odin to stock before every new ROM flash is overkill...
Click to expand...
Click to collapse
Yeah its not really necessary, I think the last time I used ODIN was before flashing the Nero beta. It will keep things fresh and mostly issue free, but if you know what you're doing you really shouldn't have to do it for every flash.

How to root t-mobile vibrant with Froyo 2.21,froyo UVKB5 ,

I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted.

Lol and don't forget tto tell people how to get to clock work mod! Wait do you even know how to? Not trying to be mean bro.
Sent from my SGH-T959 using XDA App

Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.

Been a while but look at the modified 3e recovery in the development section ...or you can odin back to jfd and root from there
Sent from my SGH-T959 using XDA App

lotusandstone said:
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Click to expand...
Click to collapse
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.

Thanks, guy, I'm ok with what I have right now, made this post as I thought it maybe can help someone like me,not very expert.

^ try some of my guides.

HG! said:
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Click to expand...
Click to collapse
Lol no that is not how you do it! You have to have a modified 3e recovery first then you can start flashing things its not as easy as that. Since the 3e recovery checks update.zip you cannot flash clockworkmod that easily you can do it on jfd that easy but not an update which has a 3e recovery!
Sent from my SGH-T959 using XDA App

well how do you flash CMD on 2.2.1 then?

Just wanted to give a quick thank you as this worked perfectly for me! The 2.2 version of super-one-click constantly had me hanging but I'm glad to have found this older version and it worked like a charm

Nope did not work: UVKB5: V1.9.1 "Failed" - V2.2 - Hangs.

wHERE are they right instructions step by step? dont want to make mistake
thanks

If all you are wanting to do is Root the phone, then look in the Q&A stickie for the Noob Guide. Has a flashable Rooter right there. If you can't find it, click the link in my signature.
I have never been able to get Superoneclick to work on any phone I have tried, for various reasons but still...

AIO Vibrant Toolbox
'nuff said.

Yes, it works!
lotusandstone said:
"I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted."
Click to expand...
Click to collapse
Thank you for this info.
I just spent a day trying to root my Galaxy S Vibrant using SuperOneClickv2.3.3 (after having it updated to Froyo 2.2). It did not work, no matter what I tried.
Finally, I came accross your post, googled for SuperOneClickv1.9.1, dowloaded and followed your instructions. It worked like a charm.
Once again, THANK YOU!

galaxy s bricked

hi guys,my galaxy s is bricked and don't know what to do!
i installed battery % mod,and after that my phone is bricked
first,i went to recovery mode and i made a clockwork restore,but after that i can't get to the recovery mode,and the phone is stuck at the galaxy s logo
please help me

Did you tried any of these solutions?
http://forum.xda-developers.com/showthread.php?t=1134975

U could flash usin odin and thn flash rom agn that works for mi
Sent from my GT-I9000 using XDA Premium App
Press thanks if this helps

ok guys thanks for your answer +1 for both
yes,i wanted to flash it with odin,but i have a really slow internet connection (I couldn't download the f.w)
anyways I took it to a phone repair shop,it should be fixed tonight
btw,do you guys know what should I do in order not to happen again?
i did a clockwork mod backup,but it didn't help.

Erm....their isn't a lot you can do bud but just make sure the mod or whatever is for your baseband possibly invest in a higher speed of internet to save taking it to the shop each time lol
Sent from my GT-I9000 using XDA Premium App

hehehe,thanks
and you are right about having a faster internet
and another problem is that i just bought this phone 2 days ago,and I'am new to android,I was a great Symbian modder

Hmm 1 advice do not install addons not suitable for ur device ask in the rom thread before falashin other add ons
Sent from my GT-I9000 using XDA Premium App
Press thanks if this helps

well your 100% right
btw,I got my phone back,but it's now downgraded to 2.2,and when I open kies it says that my device isn't upgradable (my galaxy s's f.w is now: jpjpm
i found this http://androidadvices.com/how-to-update-samsung-galaxy-s-i9000-to-jpjv6-arabic-2-3-3-firmware-2/
any safer way?

omar_killer said:
well your 100% right
btw,I got my phone back,but it's now downgraded to 2.2,and when I open kies it says that my device isn't upgradable (my galaxy s's f.w is now: jpjpm
i found this http://androidadvices.com/how-to-update-samsung-galaxy-s-i9000-to-jpjv6-arabic-2-3-3-firmware-2/
any safer way?
Click to expand...
Click to collapse
Use my guide but with an appropriate firmware from samfirmware.

Not a hell lot you can do about the download speed. I suspect it might have something to do with hotfile - I get incredibly ****ty speed from hotfile, but not from any other file sharing service.
There should be a few threads lying around in the general section about stock roms. Try downloading from there instead of ****ty hotfile.

omar_killer said:
well your 100% right
btw,I got my phone back,but it's now downgraded to 2.2,and when I open kies it says that my device isn't upgradable (my galaxy s's f.w is now: jpjpm
i found this http://androidadvices.com/how-to-update-samsung-galaxy-s-i9000-to-jpjv6-arabic-2-3-3-firmware-2/
any safer way?
Click to expand...
Click to collapse
Hmm u want to root it or sth? If u want to root it use my backup to backup apps as this does not require root than follow steps for darky reserection(dunno hw to spell ) to have a basic rooted phone than flash the rom u want
Or u could use galnet miui im usin right now quite good
Sent from my GT-I9000 using XDA Premium App
Press thanks if this helps

Before you flash anything you gotta make sure you have 2 backup plans. One is, of course, the nandroid backup. The other is having a stock firmware file you can flash with Odin in case everything goes to hell.
In my case, I have a JPU stock firmware stored on my home computer and on my work laptop. Every time I screw up so badly everything is FUBAR I go back to JPU and works like a charm.
Ah also, along with the JPU I have a CF-Root flashable file for JPU (just needs to be Froyo specific, not firmware release specific) so I can have root.
That's the only advice that hasn't been given to you already.
In reality, the Galaxy S is pretty hard to really brick. The bootloader may get corrupted but there's almost always a way out.

ok thanks guys +1
i will flash my phone with 2.3 and when I'am bored with it i'll flash it with some custom rom

omar_killer said:
ok thanks guys +1
i will flash my phone with 2.3 and when I'am bored with it i'll flash it with some custom rom
Click to expand...
Click to collapse
If u need help pm mi or reply this thread thanks
Sent from my GT-I9000 using XDA Premium App
Press thanks if this helps

ok,i will thanks for your help all!
it's a really great community for helping new people like me,it's way more better than any symbian community.

ok,i will thanks for your help all!
it's a really great community for helping new people like me,it's way more better than any symbian community.

Simplest way to circumvent the 'EMMC_CAP_ERASE' bug... Save your precious...!!!

***This is not for devices that have already been bricked. It applies to only those people who have inadvertantly flashed one of the 'Unsafe' 4.04 ROMs and wish to change ROMs or restore back their nandroid backup.***
Hi All,
Considering that a lot of gentry is unawares of how to go back to their nandroid back ups from the 'unsafe' 4.04 Stock Builds and are afraid to flash kernels fearing that their beloved may develop cataract, get pimples or maybe pass way (god rest their souls..) , below is the most foolproof, noob friendly way of going back to stock set up while circumventing the dreaded 'emmc_cap_erase' bug...
- Go to Intratech's thread of all stock firmwares in Original Development section.
- Download Stock KL1 <http://hotfile.com/dl/146342883/c1bdbd7/I9100XWKL1_I9100ODDKL1_INU.zip.html> (because it is no wipe) + Odin tool (you did flash LPM/LPO/LQ5/LQ6, exactly the same way!!!)
- Switch off your phone, restart in Download mode (Volume Down+Home+Power), you will see a flash page, choose to continue.
- Fire up Odin, confirm that the phone is connected, Click on 'PDA' and add KL1, flash KL1.
- First reboot, phone will bootloop.
- Switch off, restart in stock recovery (Volume Up + Home + Power)
- Do a factory reset.
That is it!!! Your beloved has been saved from Satanic evil...! Now install your favorite GB/ 4.03 ROM/ CM9 or CM9 derivatives or restore a nandroid back up (if you had any... )
I hope this helps...
Learn and Share.. That is what XDA is about..

kranti2064 said:
Now since you read the entire post, press the 'Thanks' button, will you?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
NO,
Don't be a thanks whore
Sent from my GT-I9100 running CM10

MemoryController said:
NO,
Don't be a thanks whore
Sent from my GT-I9100 running CM10
Click to expand...
Click to collapse
Stop being a scrooge mate..!!
Epic fail.. !!!
Sent from my GT-I9100 using Tapatalk 2

It sounded more like Gnote situation over here lol
Sent from my GT-I9100 using xda premium

what?
kranti2064 said:
below is the most foolproof, noob friendly way of going back to stock set up while circumventing the dreaded 'emmc_cap_erase' bug...
Click to expand...
Click to collapse
What?. Come that again?. Why you dont tell us step by step, what exactly what you did?. Because I TRIED (and a lot of other more complex things) that before I have to CHANGE my MB...

cpl.Bower said:
What?. Come that again?. Why you dont tell us step by step, what exactly what you did?. Because I TRIED (and a lot of other more complex things) that before I have to CHANGE my MB...
Click to expand...
Click to collapse
this is not a fix. this is a method to prevent brick. if you brickef it allready like I did, only PBA main replacement solves it.
Sent from my reborn i9100

Thank you for the feedback. Have amended OP as advised..
Sent from my GT-I9100 using Tapatalk 2

cpl.Bower said:
What?. Come that again?. Why you dont tell us step by step, what exactly what you did?. Because I TRIED (and a lot of other more complex things) that before I have to CHANGE my MB...
Click to expand...
Click to collapse
I did exactly as stated in OP.. I just happened to read around before flashing ROMs ( ***noob flashaholics*** ).. And hence, even though I have an unsafe chip and after flashing LQ5, LPM and going back to VR 3.0 and now running LPO.. I write this from my phone..
Learn and Share.. That is what XDA is about..

Can someone confirm that this works when going from LPO backwars? Also why should I flash from ICS rom to GB rom? Isn't that bad for the phone? I wanna go to some stock rom from where I can flash the jelly bean preview

Vilzu said:
Can someone confirm that this works when going from LPO backwars? Also why should I flash from ICS rom to GB rom? Isn't that bad for the phone? I wanna go to some stock rom from where I can flash the jelly bean preview
Click to expand...
Click to collapse
Yes mate, it works for LPO as well. You should flash a GB rom so that the unsafe kernel kernel is overwritten by a GB kernel which is completely safe before the phone or you attempt a wipe.
No it is not bad for your phone. In fact trying anthing else can be fatal for your phone.
Once you have taken the steps I have provided, you can flash the JB preview from CWM from the GB ROM.
Learn and Share.. That is what XDA is about..

I got a simpler way
flash siyah via heimdall/odin,
boot into recovery,
???
Profit
Sent from my GT-I9100 running CM10

MemoryController said:
I got a simpler way
flash siyah via heimdall/odin,
boot into recovery,
???
Profit
Sent from my GT-I9100 running CM10
Click to expand...
Click to collapse
Indeed, now can you please explain step by step how to get rid of the triangle and restore the binary counter to 0. (with appropriate links).
I'll add it to the OP.
Learn and Share.. That is what XDA is about..

Use triangle away or a usb jig on an older bootloader.
Sent from my GT-I9100 running CM10

MemoryController said:
Use triangle away or a usb jig on an older bootloader.
Sent from my GT-I9100 running CM10
Click to expand...
Click to collapse
Give me a step by step guide and I'll add to the OP. Else stop trolling the thread trying to portray a higher level of intellect or smartassness..
Learn and Share.. That is what XDA is about..

Use search
Sent from my GT-I9100 running CM10

kranti2064 said:
Give me a step by step guide and I'll add to the OP. Else stop trolling the thread trying to portray a higher level of intellect or smartassness..
Learn and Share.. That is what XDA is about..
Click to expand...
Click to collapse
He's actually right. Flash siyah or another custom kernel and you're good to go. Looks like the latest speedmod is safe as well.
To reset the counter and get rid of the triangle, use chainfire's app.
Or flash an older GB boot loader from Intratech's thread and use a jig.
Sent from my GT-I9100 using Tapatalk 2

just one more thing which KL1 should I flash? The one which is based of of the original package or some indian version? also the thread where you linked to only has megaupload links :/

mrcreativity said:
He's actually right....... from Intratech's thread and use a jig.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
As I said, give me a step by step method and I will add it to the OP. Or else forever maintain your peace.
My method is simple, requires no additional tinkering apart from the steps I have mentioned. Not all people like Siyah (3.1 brick incident) or want to go through the hassle of running a kernel cleaning script.
I want to keep it simple... You are free to open an another thread with the steps you feel are simplest.. You could call it "Simpler than Simplest...."
Sent from my GT-I9100 using Tapatalk 2

Vilzu said:
just one more thing which KL1 should I flash? The one which is based of of the original package or some indian version? also the thread where you linked to only has megaupload links :/
Click to expand...
Click to collapse
Use the Indian version, it is a no wipe.. You can then flash your own country's firmware over it..
Well, the <samsung-updates.com> is down for the moment, it has faster links. I guess megaupload it is for the moment then..

kranti2064 said:
As I said, give me a step by step method and I will add it to the OP. Or else forever maintain your peace.
My method is simple, requires no additional tinkering apart from the steps I have mentioned. Not all people like Siyah (3.1 brick incident) or want to go through the hassle of running a kernel cleaning script.
I want to keep it simple... You are free to open an another thread with the steps you feel are simplest.. You could call it "Simpler than Simplest...."
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
To have an informative thread an OP should first learn how to search and read. People suggested that you should search for it, which everybody knows is the answer for almost everything. If you want to know how to remove the triangle and add them to your first post, you should do your research first instead of asking the guy to spoon feed you the solution. Using TraingleAway is a no brainer, just simply flash an ICS ROM, run the app, press whatever is needed to be pressed (of course you need to verify that the information about, if you have a triangle or how many binary counts you have etc is correct), let it reboot and the binary counter and triangle will be gone. Of course just saying that won't guarantee the success of every people using it. There are some instances that problems occur that i haven't put in my so called "guide" for triangle away. The only way is to read the original post of TraingleAway thread.
If you want to help people by answering their query is to acquire knowledge on how to do things etc. You can't do that if you won't try to search and understand the subject first. Spoon feeding is the last thing we, as members of this developer site, should do.
Anyway, i am not here to bash you or anything. Of course i appreciate this thread because it will help people who are unaware how to safely flash their phone if they are on the famous "brickable ROM/Kernel". I am just here to remind you that no matter who we/you are, everyone needs to do their research first rather than people just giving you all the answer to everything. After all, using TriangleAway is "RISKY (well, i haven't heard anyone bricking their phone yet with it)" according to its developer hence the need to read its thread first before posting a guide to your thread. Good luck to you and your thread and hope you understand what i am talking about.
Cheers
Sent from my GT-I9100 using xda premium