Related
I just purchased a Telstra Touch HD T8285 on eBay. Unfortunately, the seller did not disclose that he had flashed a new ROM (Dutty ROM) to it and that USB syncing and wifi do not work. I'd like to try and get this fixed on my own...otherwise I will have to try and get the seller to take the phone back and refund my money. I really like the phone so I just want it to work properly.
After much searching on here I discovered that I could flash directly from the flash card, thus bypassing the problem of USB syncing not working. I have tried a few ROMs (EnergyRom, Miri, Telstra updated direct from HTC) and neither wifi nor USB syncing works with any of them.
I have tried all the hints/suggestions about changing USB settings in activesync on both the phone and computer and nothing works. I cannot even get my computer to recognize the phone as a USB storage device (the phone just starts charging but activesync acts as though it's not even connected). When I go into bootloader mode on the phone it displays "serial" but never changes to USB.
Bootloader screen displays the following:
BLAC120 32M
SPL-1.56.Olinex
MicroP-Blackstone (LED) v6
From what I've read on here, I think I need to get a new version of SPL on my phone but I don't know how to do so without being able to use USB syncing. Is there any way to reflash SPL on my phone using the card flash method?
Someone please help!
gmischenko said:
I just purchased a Telstra Touch HD T8285 on eBay. Unfortunately, the seller did not disclose that he had flashed a new ROM (Dutty ROM) to it and that USB syncing and wifi do not work. I'd like to try and get this fixed on my own...otherwise I will have to try and get the seller to take the phone back and refund my money. I really like the phone so I just want it to work properly.
After much searching on here I discovered that I could flash directly from the flash card, thus bypassing the problem of USB syncing not working. I have tried a few ROMs (EnergyRom, Miri, Telstra updated direct from HTC) and neither wifi nor USB syncing works with any of them.
I have tried all the hints/suggestions about changing USB settings in activesync on both the phone and computer and nothing works. I cannot even get my computer to recognize the phone as a USB storage device (the phone just starts charging but activesync acts as though it's not even connected). When I go into bootloader mode on the phone it displays "serial" but never changes to USB.
Bootloader screen displays the following:
BLAC120 32M
SPL-1.56.Olinex
MicroP-Blackstone (LED) v6
From what I've read on here, I think I need to get a new version of SPL on my phone but I don't know how to do so without being able to use USB syncing. Is there any way to reflash SPL on my phone using the card flash method?
Someone please help!
Click to expand...
Click to collapse
It sounds more like you need to update your usb drivers by following this guide. Also ensure that you have enabled 'allow usb connections' in activesync connection settings.
Unfortunately you cannot change SPL without using your usb, so let me know if this works
unfortunately that guide to updating USB drivers does not work. When my phone is in bootloader mode the bottom only says "Serial". It never changes to "USB" so the computer does not even recognize that a device is connected.
gmischenko said:
unfortunately that guide to updating USB drivers does not work. When my phone is in bootloader mode the bottom only says "Serial". It never changes to "USB" so the computer does not even recognize that a device is connected.
Click to expand...
Click to collapse
Did you check that 'allow usb connections' was turn on in activesync connections settings?
Also when you update usb drivers you need to turn your pc off then on again.
Yes I made sure of that setting in ActiveSync.
Since my computer does not recognize my phone being connected, the "Windows CE USB Devices" is not listed in the Windows Device Manger. I have tried connecting my phone to 3 different computers (Windows XP and Windows 7) using different USB cables and still get nothing.
The closest I got was one time yesterday when I plugged my phone into the a/c adapter to charge, the USB window popped up on my phone asking whether I wanted to connect to ActiveSync, Storage Card, or Internet Sharing. That is the only time the window has ever opened and it wasn't even plugged into a computer.
gmischenko said:
Yes I made sure of that setting in ActiveSync.
Since my computer does not recognize my phone being connected, the "Windows CE USB Devices" is not listed in the Windows Device Manger. I have tried connecting my phone to 3 different computers (Windows XP and Windows 7) using different USB cables and still get nothing.
The closest I got was one time yesterday when I plugged my phone into the a/c adapter to charge, the USB window popped up on my phone asking whether I wanted to connect to ActiveSync, Storage Card, or Internet Sharing. That is the only time the window has ever opened and it wasn't even plugged into a computer.
Click to expand...
Click to collapse
ok, try going to to Start > Settings > Connections > USB to PC and ensure that 'ActiveSync' is selcted along with 'Enable faster data synchronization' and try again
Fallen Spartan said:
ok, try going to to Start > Settings > Connections > USB to PC and ensure that 'ActiveSync' is selcted along with 'Enable faster data synchronization' and try again
Click to expand...
Click to collapse
I've tried that as well.
Basically, if it's been written here on the forum I've tried it. Each thread I've found where someone has had the same problem seemed to fade off and no one reported back (even those that fixed it).
Possibly a hardware problem with your usb port then which would require a warranty return unless anyone else has any suggestions
EDIT
Try flashing original stock rom, i.e. the one which was on the device originally when bought. This rom will still flash even if bootloader says 'serial'. This is the only rom that this works for. Unfortunately in your case you do not know what this rom was so a bit of guess work will be required going by date and location. Stock roms are available in wiki here and it'll just be trial and error
Hi
Hello,
Unfortunately,I have the same problem With my HTC HD phone, I've tried every thing but i couldn't found a solution to my problem, in SPL stage the screen show me only Serial and hang on it ,and when i connect my phone to my PC not change to USB,
So please any one have a clue for this,
Thanks in advance.
Dear gmischenko,
Did you solve your problem??
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
i dont know if its related but i have read that sometimes its the anti virus at fault (notably KASPERSKY)
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
I had the same problem with Win 7, however when I unchecked the faster connection option on HD2 it connected, although in Win7 it had a red x in mobile connection, but on the HD2 a connection had been established.
is formatting your PC an option?
Firewall?
I have three Windows 7 machines (32 & 64) and all connect without any problem. Disconnect from your internet connection. Turn off your anti-virus and firewall and give it a shot. Do you get the window that asks how you want to connect when you plug in your cable? Do you have a functioning cable? Just because it charges does not mean it will connect for data. Will it connect to an XP machine?
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
Have you tried a different usb cable? That's the only other thing I can think of that might be the problem.
HD2 on Windows 7 Ultimate
Hi
Had the same problem, and it turned out that the USB-cable i used, was the problem.
I used the cable that followed the 12v Car Charger, and that did no good, so I went and got the cable that came in the package (chargercable) and then it was Christmas and halloween alltogether.
Works like a charm!
@djchubbs yes i have turned that off as well - along with windows firewall
@ozkaya - no formatting my pc is not an option
@johnboatcat - When i plug it in the phone instantly asks me what kind of connection i want (file transfer or active sync with the checkbox option for faster sync as well). It transfers files just fine in file transfer mode as well.
@zarathustrax i have not tried a different USB cable as i dont have access to one. I doubt something is wrong with mine however i will have to see if i can get one somewhere.
@kongsvada Only cable i have is the one that came in the box factory from HTC
Again thank you for all the replies! I really really am trying to get this to work. I have my home computer which i do everything on but i tried my friends laptop today - it has the same exact build of windows 7 on it as my home computer (if that matters) and it will not sync or let me make a partnership or anything. I plugged it in, it downloaded WMDC and installed etc, restarted the computer and plugged it in, went to active sync mode and WMDC or the sync center do not recognize it at all. Since i cant find it in sync center i cant create a partnership.
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
OK, let me help you on this if flashing a new ROM will be your immediate task.
1) Just download the ROM that you like and rename it to LEOIMG.nbh
2) Make sure you've HSPL your LEO first.
3) Copy the renamed file into the root of your memory card.
4) Press the VOL down button simultaneously while turning ON your LEO.
5) Just follow the onscreen instructions on your LEO.
6) That's it.
the only problem that I can sense for you now is to HSPL your device because it does require connection with your PC. To bypass this connection with PC thing, do this;
a) Turn OFF your LEO.
b) Turn ON while pressing the VOL Down button together and it will enter the bootloader mode (TRICOLOR Screen).
c) At the bottom of your LEO, it will says "serial"
d) Now, connect the cable to your LEO and and your PC, the words will change to "Usb"
e) Let your PC do its work by installing the necessary driver automatically.
f) When it is done, run the HSPL program your PC. You can download it from this wonderful forum (Please search for it in the ROM development section)
g) Let the program finish and you can see something on your LEO screen in the process. Just look at it and let it finish. DO NOT TURN OFF YOUR LEO (I don't want you to brick your device).
h) When everything is done, reset your LEO and this time press the VOL Down button. This is to go back to the bootloader mode and to check whether the HSPL has been install correctly.
i) then go back to the steps (1 to 6) above to flash your new ROM.
Enjoy,
please post your result and help others too.
regards,
morisa
I had the same problem with my new computer which happend to be running windows 7 (everything was fine on my old xp machine). After much searching and trouble shooting the problem eventually came down to a setting on the motherboard (something to do with the p55 chipset). After I'd turned the c-state option on in the bios I've had no further issues.
It's a long shot but perhaps it will help you too
ok this sounds promising - i will try it this weekend when i have the time - i greatly appreciate the help and i will post results to let everyone know!
thank you all and like i said - will be trying your way soon mmorisa!
I had to change a registry setting on Windows 7 to get it to connect to my HD2... Of course I cant remember the setting, it may be this one
forum.xda-developers.com/showpost.php?p=3942556&postcount=7
mmorisa said:
OK, let me help you on this if flashing a new ROM will be your immediate task.
1) Just download the ROM that you like and rename it to LEOIMG.nbh
2) Make sure you've HSPL your LEO first.
3) Copy the renamed file into the root of your memory card.
4) Press the VOL down button simultaneously while turning ON your LEO.
5) Just follow the onscreen instructions on your LEO.
6) That's it.
the only problem that I can sense for you now is to HSPL your device because it does require connection with your PC. To bypass this connection with PC thing, do this;
a) Turn OFF your LEO.
b) Turn ON while pressing the VOL Down button together and it will enter the bootloader mode (TRICOLOR Screen).
c) At the bottom of your LEO, it will says "serial"
d) Now, connect the cable to your LEO and and your PC, the words will change to "Usb"
e) Let your PC do its work by installing the necessary driver automatically.
f) When it is done, run the HSPL program your PC. You can download it from this wonderful forum (Please search for it in the ROM development section)
g) Let the program finish and you can see something on your LEO screen in the process. Just look at it and let it finish. DO NOT TURN OFF YOUR LEO (I don't want you to brick your device).
h) When everything is done, reset your LEO and this time press the VOL Down button. This is to go back to the bootloader mode and to check whether the HSPL has been install correctly.
i) then go back to the steps (1 to 6) above to flash your new ROM.
Enjoy,
please post your result and help others too.
regards,
morisa
Click to expand...
Click to collapse
This worked great! I knew about bootloader screen, i knew i could flash from the SD card but i didn't know how to put them together. Thank you very very much for the help, now off to flashing roms!
One simple - probably stupid question:
I have seen TMOUS compatible on a few roms, however i will then read for that same rom that it is 576 ONLY - And then in another rom thread i see the creator of the rom say TMOUS compatible and then "TMOUS=1024". So what one is it!? just trying to be safe
Again - thank you all so much for the help - i really appreciate everyone that tried to help!
Edit: Just flashed the Evo rom to the phone, plugged it in and BAMN im able to sync with WMDC immediately - so thank you all so so much - super happy now with my 1024 leo!
slowestcivic,
I feel happy that you managed to do it and flash your favorite ROM with the guides I wrote.
at least i can see another smile from another happy LEO user.
best regards and don't forget to help others too.
mmorisa
slowestcivic said:
@djchubbs yes i have turned that off as well - along with windows firewall
Again thank you for all the replies! I really really am trying to get this to work. I have my home computer which i do everything on but i tried my friends laptop today - it has the same exact build of windows 7 on it as my home computer (if that matters) and it will not sync or let me make a partnership or anything. I plugged it in, it downloaded WMDC and installed etc, restarted the computer and plugged it in, went to active sync mode and WMDC or the sync center do not recognize it at all. Since i cant find it in sync center i cant create a partnership.
Click to expand...
Click to collapse
Also running Office 2010 beta can cause active sync issues
yeah i have 2007 outlook so that wasnt thr problem. Still not sure what was wrong with it but after flashing a new rom all is well
I had the same trouble with win7. What i did after i tryed evrything i could think of was dowloading the latest active sync from Microsoft. Restarted and plugged the phone in and it worked
My PC won't find my Wildfire. The problem I have is that it recognices my phone as a "unknown usb device" and I won't be able to transfer stuff between the SD-card and the PC (very annoying as I can't really move music).
I'm running Cyanogen Mod (the stable released 12th of december but had this problem for a while now). It's rooted with unrevoked and the HBOOT usb drivers won't work (reinstalled vista on my pc).
So what should I do?
When you plug your wildfire in, up in the top left hand corner(on the notification bar) you should see two little icons pop-up, One will be telling you that you have connected your phone to a power source and it is now charging, the other allows you to turn on usb file transfer.
Drag down you notification bar and click the one that says something like "file transfer" and it should open a new window... there should be a button at the bottom of the page which allows you to toggle the file transferring on and off, remember to turn it off before you take your phone out, or it will bug the next time and you'll have to reboot your phone and your pc to get it working
Hope this helps,
note* if this doesn't work there is a driver you can download which might make it recognise it, but I believe the above solution should work for you!
Edit:
If you still can't find it i'll upload a screenshot when I get home
try installing the hboot drivers again.
that solved it for me when my phone wouldn't be recognised, funny thing was it stopped recognising after i was charging my auntie's ipod. LOL
I would reinstall the drivers but it doesn't show up as a "Android Device" (or what it's called) in device manager.
I don't even have HBOOT USB as an option on the bootscreen. (with the USB plugged in)
UPDATE: Installed and uninstalled HTC Sync to get the drivers. Still an unknown usb device on which I can't install the special HBOOT drivers and still no HBOOT USB on boot screen even when plugged in.
If your phone is rooted, HTC sync could be your problem.
Had the same problem.
This is how I solved it, from the HTC support page:
Tips 1:
If you cannot see the HTC Sync option when you connect your phone to the computer via USB, please follow the
Instructions below:
1. Make sure you select USB Debugging in Settings > Applications > Development before connecting your phone to the computer
2. Connect you Phone to the PC and wait 20 seconds for your phone to install HTC Sync on your phone.
3. Unplug the USB sync cable. Wait for 5 seconds. Reconnect the Phone to the PC using the USB cable.
4. Select “HTC sync” and wait for HTC Sync to recognize your Phone. This process could take up to a minute your first
time connecting to the computer.
Click to expand...
Click to collapse
Or just install pdanet on both computer and phone, it will automatically install the drivers too. After that you can easily uninstall pdanet from both computer and phone, the drivers will stay installed.
hello, I had the same problem, cm since I upgraded to, I can not sync my windows with wildfire, and I found an alternative way to synchronize your PC and the wildfire MyPhoneExplorer excellent! really good!
I'm having the same problem, I can't access my Wildfire through my PC.
My PC recognizes the device but I can't access the SD-Card as it says 'Please insert a disk'. It's just charging, no option to establish a connection to the disk drive.
I tried several things, including the USB-debug mode which didn't work out. With MyPhoneExplorer I have a connection to my phone (can see calls, messages and memory status) but when I want to view the files on my SD-Card it pops up an error message saying "OBEX protocol couldn't be initalized! Phone didn't answer'.
Please help me how to connect my Wildfire again!
gellow said:
I'm having the same problem, I can't access my Wildfire through my PC.
My PC recognizes the device but I can't access the SD-Card as it says 'Please insert a disk'. It's just charging, no option to establish a connection to the disk drive.
I tried several things, including the USB-debug mode which didn't work out. With MyPhoneExplorer I have a connection to my phone (can see calls, messages and memory status) but when I want to view the files on my SD-Card it pops up an error message saying "OBEX protocol couldn't be initalized! Phone didn't answer'.
Please help me how to connect my Wildfire again!
Click to expand...
Click to collapse
OK, i somehow figure it out by myself:
all I had to do is rebooting my device, after that everythings is working just fine! Thanks for nothing
You should have tryed that before asking. It's common sense.
Sent from my HTC Wildfire using Tapatalk
try and install HTCDriver_2.0.7.17 in the root of ur phone!
Hi I've just bought this phone HTC HD2 and Win7 was installed on it.
However, I just can't connect it to my Windows XP computer .
Is there something I've missed to do? I have Activesync 4.5 installed and it just doesn't see my phone.
I'm new with this so any help will be highly appreciated.
I'd like to install Android Gingerbread on it but the first step (a connection to my pc) is already a burden
With windows phone 7, you don't sync like previous windows phones... Activsync is no more...
You sync media (music, videos, pics etc) with zune...
You can sync contacts and calender with hotmail/gmail/livemail...
joris donders said:
Hi I've just bought this phone HTC HD2 and Win7 was installed on it.
However, I just can't connect it to my Windows XP computer .
Is there something I've missed to do? I have Activesync 4.5 installed and it just doesn't see my phone.
I'm new with this so any help will be highly appreciated.
I'd like to install Android Gingerbread on it but the first step (a connection to my pc) is already a burden
Click to expand...
Click to collapse
You can sync using the bootloader.
Turn off your phone, then boot while holding volume down. Then connect the USB and flash what you want .
P.S. : (Your device may not show up on Active Sync, but as long as all the drivers are installed then your device is connected.)
kawazaki said:
You can sync using the bootloader.
Turn off your phone, then boot while holding volume down. Then connect the USB and flash what you want .
P.S. : (Your device may not show up on Active Sync, but as long as all the drivers are installed then your device is connected.)
Click to expand...
Click to collapse
bootloader will not helpyou sync anything, it is used to flash other ROMS, you need zune installed to sync with Windows Phone 7
I can't connect it to PC . I mean , i conncect the usb cable to my phone and my pc ... my phone shows that it is connected to my pc ... but there is nothing happening . I mean the PC doesn;t find the my phone. What should i do. Ty everybody! Sorry for my english
Well,may i know on what OS are you trying to establish USB connection? WM/Android?...For WM, have you installed windows mobile device center on your PC and tried syncing? As for android,try installing the right version of HTC Sync on your PC. Also, ensure you tick 'USB Debugging' under Settings-Applications-Development. For a few android builds, there will be a notification, prompting you to turn on USB Storage after you connect the USB cable. You have to try all those first before moving on to advanced troubleshooting like manual driver installation,android sdk,hard rest,etc.