Related
Well first off, ive been at this for 2 days and its frustrating. I am new to this flashing and rooting business and ended up bricking my phone from using the wrong files in metamorph and never backing my stock files up. It would give me a blank screen with the red LED lit up and all my home buttons on the bottom lit up. I followed the Odin directions and actually got my phone to stock. But it was extremely laggy and and i had no service and my SD card just kept connecting and reconnecting. Well i followed the flashing kernel threat because someone told me to try that so i can get the stock kernel or whatever on the phone. That failed and now im sitting here with my phone displaying a phone icon and a computer icon, then a caution symbol in the middle. Someone pleaseeee help me fix this.
l2,
I've been there 3 times this morning already as I hadn't flashed a new zImage to this particular device yet until this morning. What you need to do is get the stock files from http://rapidshare.com/files/415661977/SPH-D700-DG27-8Gb-REL.tar.html and s1_odin_20100513.pit (it must be 13, not 12). Boot into Download mode (hold 1 when powering on). Start Odin 3, check Auto Reboot and Debug En. Choose your PIT file, and under PDA choose the SPH-D700-DG27-8Gb-REL.tar. Plug in your phone, once it is recognized in Odin click Start. This takes about 10 minutes, I know it looks like it hangs up a couple of times but it should keep going. Let me know if that helps.
khalaan said:
l2,
I've been there 3 times this morning already as I hadn't flashed a new zImage to this particular device yet until this morning. What you need to do is get the stock files from http://rapidshare.com/files/415661977/SPH-D700-DG27-8Gb-REL.tar.html and s1_odin_20100513.pit (it must be 13, not 12). Boot into Download mode (hold 1 when powering on). Start Odin 3, check Auto Reboot and Debug En. Choose your PIT file, and under PDA choose the SPH-D700-DG27-8Gb-REL.tar. Plug in your phone, once it is recognized in Odin click Start. This takes about 10 minutes, I know it looks like it hangs up a couple of times but it should keep going. Let me know if that helps.
Click to expand...
Click to collapse
okay ill try all of that but Where can i get the 13 pit file?
It can be downloaded from this link.
http://www.4shared.com/get/6aSCPmEf/s1_odin_20100513.html
khalaan said:
It can be downloaded from this link.
http://www.4shared.com/get/6aSCPmEf/s1_odin_20100513.html
Click to expand...
Click to collapse
thanks so much man ill try it out. One question though. I already started this odin thing and its doing its thing. its about half way done but its using the 12...can i just shut my phone off and put it in download again when its done and use the 13 and it will work?
If you have it going with the 12 already I'd give that a try, if it doesn't work you can always get back into download mode and do it with 13. I couldn't get 12 to ever start it would always sit for 20m and do nothing.
khalaan said:
If you have it going with the 12 already I'd give that a try, if it doesn't work you can always get back into download mode and do it with 13. I couldn't get 12 to ever start it would always sit for 20m and do nothing.
Click to expand...
Click to collapse
okay yeah ill try. but its been sitting for like 10 min at half way on the status bar...
That is way the devil too long, go ahead and unplug your phone, hit reset in odin, set it up like I instructed, reboot your phone to download mode, and give it another go.
yeah lol okay i thought so. haha
Alllll fixed. Thank you guys soooo much for helping out. Im going to root again but i'm not gunna mess with metamorph this time lol, whats a good root? Im learning all this stuff and idk what one i should do.
http://forum.xda-developers.com/showthread.php?p=8628341#post8628341
>_>
Please Modify Title of Thread add
" Solved - Bricked Epic - tried everything "
I bricked my Epic last weekend and am feelin' ya on all the stuff you did to unbrick it. Glad to hear that all is well~
I screwed my setup up and had to do the Odin method yesterday. I didn't read this post before hand, and I used the ****12.pit instead of the 13. What is the difference in the two? My phone seems to be working just fine with the 12. One problem I found I don't believe I had before is theming the dialer_tab_activity.apk FCs the phone on hangup, but when I put another one in unthemed, it works fine.
help
I cannot get phone to load any tar completely.. they all stop and phone's screen goes purple. Most the time it hangs in odin at the zImage and then sometimes it gets a few bars going .. and hangs at factoryfs.rfs. Any help
You don't need the pit file when flashing a tar rom. It's only for modems and kernals. I have used Odin and haven't used the pit. Works just fine.
Okay, i just joined. Sorry if i sound ignorant (most likely cause I am) but i am fairly certain i semi-bricked my Epic, okay so it started when i flashed the CyanogenMod it was very laggy so i figured i did it wrong, quickly using clockwork i flashed VIPERrom (FRoZeN) DK28 all looked fine but then my phone's service started acting up, so i tried to re-flash CyanogenMod. This ***** it up worse it got stuck at the Samsung boot logo, now i am trying to revert to Stock but Odin nor my Cpu recognize the Device.
Extra info that might help, I have the Stock Tar, Odin 1.6 with Pit, can get into both download and CW recovery...
Help this ignorant fool please T_T
The Boxinator said:
Okay, i just joined. Sorry if i sound ignorant (most likely cause I am) but i am fairly certain i semi-bricked my Epic, okay so it started when i flashed the CyanogenMod it was very laggy so i figured i did it wrong, quickly using clockwork i flashed VIPERrom (FRoZeN) DK28 all looked fine but then my phone's service started acting up, so i tried to re-flash CyanogenMod. This ***** it up worse it got stuck at the Samsung boot logo, now i am trying to revert to Stock but Odin nor my Cpu recognize the Device.
Extra info that might help, I have the Stock Tar, Odin 1.6 with Pit, can get into both download and CW recovery...
Help this ignorant fool please T_T
Click to expand...
Click to collapse
You forgot to flash the EXT4 or RFS Kernel
http://android.stolenrobot.com/Epic4G/epic.htm
that comes with cyanogen it looks like just put either on your sd card then flash after you flash cyanogen in Cwm
Here is some more info
http://forum.xda-developers.com/showthread.php?t=935060&highlight=tutorial
iSaint said:
You forgot to flash the EXT4 or RFS Kernel
http://android.stolenrobot.com/Epic4G/epic.htm
that comes with cyanogen it looks like just put either on your sd card then flash after you flash cyanogen in Cwm
Here is some more info
http://forum.xda-developers.com/showthread.php?t=935060&highlight=tutorial
Click to expand...
Click to collapse
I did flash EXT4 "CM6EXT4kernel-1-2-2011" this one to be specific.
The Boxinator said:
I did flash EXT4 "CM6EXT4kernel-1-2-2011" this one to be specific.
Click to expand...
Click to collapse
did you wipe x3 ?
Guys,
I'm in need of help fast.....
Just tried to do the Froyo Upgrade and have hit an almighty problem.
Kies downloaded and went to the next stage 'Upgrade'.
It got about 5% into doing this when the bar stopped moving and the phone switched off.
It's been like this now for over 30mins..... The phone won't power up (it's still connected to the PC).
HELPPPP.
Well you get my sympathy vote! But other then that I think you know yourself what to do. You've been around... Good luck!
Yes..... Bloody Phone, Bloody Kies, Bloody Samsung.
I unplugged the phone in the end and Kies offered to do a Firmware Recovery so I thought why not give it a try.
I went into Download mode, reconnected and Kies started the recovery procedure only for again the bar to stop moving again and it's stopped doing the recovery.
The screen on the phone remained a constant bright Yellow.
I unplugged it again and tried once more... It again stopped about a quarter way into the recovery only this time the screen has turned a constant Green.
Damn.................
The sad thing is that this reminds me so much of my sinclair zx81. 25 years later and we still have to deal with the same problems. Never sure the data gets from point A to point B.
Right.... Now I need to find the address for UK returns.
Don't have my warranty card info with me either so looks like I'll have to Google the returns.... but I'm busy as hell and have an Op to carry out soon.
If anyone comes up with it (or the link) I'll be grateful.
Bugger....
I'm probably teaching the teacher, but are you using the USB lead supplied with the phone? I tried to download some music using another lead and the download stopped halfway.
Sorry if this is too obvious.
Geryatrix said:
I'm probably teaching the teacher, but are you using the USB lead supplied with the phone? I tried to download some music using another lead and the download stopped halfway.
Sorry if this is too obvious.
Click to expand...
Click to collapse
No problem on the 'techer', any advise or assistance is better than nothing.
Yes, I used the cable supplied by Samsung... Nothing seems to sort this out.
As you are thinking of returning it, I conclude you can't get to any recovery/download mode. I don't know if Kies messed up the bootloader or keymappings but there is still the diy jig you might try. Also I have come across many devices in my day that needed repetitive flashing to get to the 100%. It would be bad if this was the case with a 2010 phone but hey its a Samsung.
sargasso said:
As you are thinking of returning it, I conclude you can't get to any recovery/download mode. I don't know if Kies messed up the bootloader or keymappings but there is still the diy jig you might try. Also I have come across many devices in my day that needed repetitive flashing to get to the 100%. It would be bad if this was the case with a 2010 phone but hey its a Samsung.
Click to expand...
Click to collapse
Well I've tried the Firmware Recovery at least a dozen time, each time it starts and stops at different parts.
I nearly got to three-quarters through when the bloody thing hung again.
No problem with the 3 Botton access and getting the Yellow Android Man on screen.. No problems connecting to Kies but as soon as you try the recovery it stops at some point during the process simply saying "An unexpected error has caused firmware upgrade to fail. Do you want to perform firmware recovery now?"....... and that came up whilst doing the firmware recovery.
Doesn't work to flash with odin either?
xExisioNx said:
Doesn't work to flash with odin either?
Click to expand...
Click to collapse
I don't want to use Odin if possible.
With that many different phones and ROMS available I don't want to end up screwing the phone totally.
Well Kies does not have a reputation to be very functional but there are two or three other tools to flash your phone. Although I am not a compulsive flasher, I did use Odin a couple of times. I am not sure exactly why you are having stage fright (referring to your other post on this matter).
Bringing it back to Eclair with a stock rom, using the rom, pit and instructions on http://www.samfirmware.com might help you to restore sanity. Once you are sure you haven't lost your phone you can then retry to use Kies.
The problem for you might be a partialy broken bootloader or incompatibility between the rom mappings and your phones current setup. Flashing a low rom might solve that. (As I understand from heimdall there are high and low packages, the low packages contain a bootloader and are more risky to flash since replacing the bootloader might truly brick your phone)
Also I read about people just flashing a pit file to force a repartition and format of the phone.
Make sure to get it fixed before op, I wouldn't want my doctor to worry about his phone, stiching me up with a pair of siccors stil in me ;D
Don't be scared of Odin. It has recovered my phone a million times
Really, the time and effort of getting a replacement when you can fix it in 2mins with odin in your own home... seems crazy.
You can flash a UK firmware if theres one available, or otherwise flash any firmware and update to UK firmware using kies reg hack, as far as i understand.
sargasso said:
Well Kies does not have a reputation to be very functional but there are two or three other tools to flash your phone. Although I am not a compulsive flasher, I did use Odin a couple of times. I am not sure exactly why you are having stage fright (referring to your other post on this matter).
Bringing it back to Eclair with a stock rom, using the rom, pit and instructions on http://www.samfirmware.com might help you to restore sanity. Once you are sure you haven't lost your phone you can then retry to use Kies.
The problem for you might be a partialy broken bootloader or incompatibility between the rom mappings and your phones current setup. Flashing a low rom might solve that. (As I understand from heimdall there are high and low packages, the low packages contain a bootloader and are more risky to flash since replacing the bootloader might truly brick your phone)
Also I read about people just flashing a pit file to force a repartition and format of the phone.
Make sure to get it fixed before op, I wouldn't want my doctor to worry about his phone, stiching me up with a pair of siccors stil in me ;D
Click to expand...
Click to collapse
Thanks... Need to find out now which is the right PIT to download.
I was on JF3.
God... if only I had more time on my hands.
Okay... got to go guys... Surgery to do.
I'll do the Odin later.
To save me time searching could someone please post below the relevant links I need to get Odin and the procedure....
Cheers.
When you flashed did you remove your sim card? I had that same problem with ki es. Removed the sim card and redid the flash and it continued on it's way.
How this helps.
Sent from my GT-I9000M
Well, if you have an account at samfirmware you can use this link http://www.samfirmware.com/WEBPROTECT-i9000.htm.
Make sure before you do anything to check your phone model is the one I linked to. Making a backup of your efs directory is not possible anymore but normally that should be done also. As a precaution I always remove my external sd card and sim card before flashing and - as you know - have the battery loaded to the max.
It might be an idea to skip jf3 and go to JM8 with a 512 pit and repartition on. This because it seems to be the recommended way of doing things at samfirmware as preparation for the flashing of current froyo releases.
I have never had problems with their way of doing things but opinions differ.
[EDIT]
I downloaded their JF3 package to see if there was a pit file included as there is some discussion what PIT file to use 512 vs 513. The package contains no information on that. It does however contain the word LOW in one of the filenames ...
Beards said:
Okay... got to go guys... Surgery to do.
I'll do the Odin later.
To save me time searching could someone please post below the relevant links I need to get Odin and the procedure....
Cheers.
Click to expand...
Click to collapse
I don't think you need to use a pit, odin should use the information from the phone assuming partitions remain intact. I've flashed a dozen times without one. If you do use one then use 512.
First off, get into recovery try and clear, reset what you can. Remove the sim and external SD as a precaution. Then back to download mode without the phone usb connected.
Grab the JPO firmware > http://www.multiupload.com/MX8XW7BG24
Grab odin 1.3 > http://www.megaupload.com/?d=MADK0XTB
Extract the firmware somewhere, open odin then select JPO_JPO_U_JPP.tar as PDA. Leave everything un-ticked except reboot. Plug the phone into your PC make sure Kies is not running and the battery is charged. In odin you should see a yellow window under ID:COM with a COM port open. If you do hit start, if all goes well a green bar will move across until the phone reboots. Leave it to do its thing at the big S (I usually unplug USB by now, to avoid problems) wait upto 10mins first time. If it hangs try a reset and cache clear and reformat SD. That's all I do, worked with all the firmwares I've downloaded from Samsung's FUD server.
The PIT files are templates for partition information so Odin can manage the size of the internal device partitions. Your standard device should already be on 512 layout, the other PIT's were development hacks. Like I said you shouldn't really need to repartition, but if you do > http://www.multiupload.com/I5WICSBFJ1
Fornowagain said:
I don't think you need to use a pit, odin should use the information from the phone assuming partitions remain intact. I've flashed a dozen times without one. If you do use one then use 512.
First off, get into recovery try and clear, reset what you can. Remove the sim and external SD as a precaution. Then back to download mode without the phone usb connected.
Grab the JPO firmware > http://www.multiupload.com/MX8XW7BG24
Grab odin 1.3 > http://www.megaupload.com/?d=MADK0XTB
Extract the firmware somewhere, open odin then select JPO_JPO_U_JPP.tar as PDA. Leave everything un-ticked except reboot. Plug the phone into your PC make sure Kies is not running and the battery is charged. In odin you should see a yellow window under ID:COM with a COM port open. If you do hit start, if all goes well a green bar will move across until the phone reboots. Leave it to do its thing at the big S (I usually unplug USB by now, to avoid problems) wait upto 10mins first time. If it hangs try a reset and cache clear and reformat SD. That's all I do, worked with all the firmwares I've downloaded from Samsung's FUD server.
The PIT files are templates for partition information so Odin can manage the size of the internal device partitions. Your standard device should already be on 512 layout, the other PIT's were development hacks. Like I said you shouldn't really need to repartition, but if you do > http://www.multiupload.com/I5WICSBFJ1
Click to expand...
Click to collapse
Surgery postponed until tonight so I have some free time.....
Okay, I got Odin 1.3 & JPO Firmware.
I loaded the JPO into Odin (in the PDA section).
Next I put the SGS into Download Mode and connected via USB and sure enough the ID:COM came up yellow with COM7 so I hit Start.
The green line went so far across under KERNAL but just as it was about to finish that box the SGS screen changed to a solid Blue screen and nothing further is happening in Odin.
Any advice??
Odd never seen that before, maybe your root problem. Should have rebooted automatically once the progress bar reached the end assuming you had the reboot option selected. Try a manual reboot, hold the power button down until it restarts. My next step would be the repartition and try again, load the PIT file (as PIT). Same flash procedure as before just using the 512 PIT, reset it all and try again.
Okay,
There is a growing number of us XDA members on the Vibrant platform who have just bricked out phones. Save for other DEV tools, which I have not used, do not have access, and do not know how to use, for all intensive purposes, this phone is Br'iKTed ! ! !
Here are the series of events
1. flashed the latest Bionix
2. Worked great, some bugs, but for the most part without incident.
3. Flashed new DOW Kernel,
4. worked great for 2 days.
5. then on night 2, the phone was stuck on the DOW Green robot screen
6. could not get into Recovery mode (none of the recovery modes)
7. Phone would not boot
8. ODIN back to stock
9. After Vibrant screen, the phone turns off. No soft keys, Nada!
10. Flashed JI5, Ji6, Eugene's Non Bricking Froyo (ODIN Files)
11. Same result, Turned off after Vibrant
and
12. still cant' get into recovery
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
So I'm not sure how DEVs would like to proceed on this.
TW (I've always loved your roms. Been following you since the first BIONIX 1.8)
Morific (If it's the Kernel, i'd like to know about it)
Thanks for reading guys. I wanted to give everybody a heads up.
I don't know what the problem is, but I do know that the phone does not work.
I'd appreciate some suggestions or anything.
And to inform the community that this problem is out there. I hope there aren't any more bricked phones.
Cheers,
have you tried using odin with the repartition checked
Yes I have.
Tried it with/ Without. Using Just the Tar file, using just the base file. I've tried it all.
Thanks
a4 moda said:
Yes I have.
Tried it with/ Without. Using Just the Tar file, using just the base file. I've tried it all.
Thanks
Click to expand...
Click to collapse
have you tried to odin to ka6 or ka7? something with a bootloader
not to be that guy, but how does this pertain to development? This sounds to me like an individual case of something going wrong and not an overarching issue with current available software. Just in case I am wrong I am flashing Bionix, and the DOW kernel myself to see if I end up with the same issue. My suggestion is flash back to stock, and exchange your device for a new one from T-Mobile.
I totally understand what your going through. I'm having the exact same problem, the DOW kernel flashed ok but then it didn't want to come off and it totally has my phone stuck on that damn green robot screen.
I soft-bricked my phone once by pulling USB cable immediately after ODIN forced my phone to reboot after flashing. It was the first time I ever ODIN'ed my phone, and thought the reboot (ODIN calls it reset) was the final step of flashing, and unplugged the USB cable. Anyway the phone did not initiate final step of the installation of JFD image, and went into boot loop. You can't imagine how freaked I was. It wouldn't go into recovery mode even if I pressed volume up, down and power combo, because it didn't stop rebooting right after the Vibrant logo. I am not sure if bootloader was not installed correctly, though. But I kept the phone rebooting for a while to see what happens. No luck. Eventually, I followed someone's instruction, and pulled my battery out, plugged USB to my laptop and to my phone, started ODIN, and popped in the battery. The phone immediately restarted into download mode, and I was able to flash the phone again.
My experience may not help you as it appears that you are able to flash ODIN-flashables, at least. But I hope this helps someone who's experiencing similar issues. And I would try downloading a JFD image and verifying MD5 before flashing. It could be bad downloads of the image files.
Try to go to eugenes forum and he has a file to download...it is his unofficial jk2 froyo rom. Don't use the old "froyo that does not brick" Try to flash that in ODIN. I just used it tonight when I got stuck in stock recovery with a MBR Check sum failure. That should get u back to where u can fix ur phone. Also I don't click the repartition button in ODIN just causes problems for me. If u need anything feel free to P.M. me.
Sent from my SGH-T959 using Tapatalk
STiGLOGiC said:
not to be that guy, but how does this pertain to development? This sounds to me like an individual case of something going wrong and not an overarching issue with current available software. Just in case I am wrong I am flashing Bionix, and the DOW kernel myself to see if I end up with the same issue. My suggestion is flash back to stock, and exchange your device for a new one from T-Mobile.
Click to expand...
Click to collapse
Completely reasonable. This pertains to development because if there is an endemic problem with one of our ROMS or KERNELS (not pointing fingers, just pointing out the possibilities that I know of, there could be more), people in our community need to know. Hence, I titled it "PUBLIC SERVICE ANNOUNCEMENT"
Thanks. I hear you about Tmobile. I'd rather not have to dump my problem on Tmobile if I can fix it, because I flashed the rom. Despite the fact that Tmobile JFS leaves something to be desired, they did deliver me a working phone. So i'd like to exhaust all possibilities before calling it quits.
hackman17 said:
I totally understand what your going through. I'm having the exact same problem, the DOW kernel flashed ok but then it didn't want to come off and it totally has my phone stuck on that damn green robot screen.
Click to expand...
Click to collapse
Exactly.
jaetm83 said:
I soft-bricked my phone once by pulling USB cable immediately after ODIN forced my phone to reboot after flashing. It was the first time I ever ODIN'ed my phone, and thought the reboot (ODIN calls it reset) was the final step of flashing, and unplugged the USB cable. Anyway the phone did not initiate final step of the installation of JFD image, and went into boot loop. You can't imagine how freaked I was. It wouldn't go into recovery mode even if I pressed volume up, down and power combo, because it didn't stop rebooting right after the Vibrant logo. I am not sure if bootloader was not installed correctly, though. But I kept the phone rebooting for a while to see what happens. No luck. Eventually, I followed someone's instruction, and pulled my battery out, plugged USB to my laptop and to my phone, started ODIN, and popped in the battery. The phone immediately restarted into download mode, and I was able to flash the phone again.
My experience may not help you as it appears that you are able to flash ODIN-flashables, at least. But I hope this helps someone who's experiencing similar issues. And I would try downloading a JFD image and verifying MD5 before flashing. It could be bad downloads of the image files.
Click to expand...
Click to collapse
Thanks for the heads up. I've gone through this myself many times. And i'm sure your post will help others out there. My problem (as well as many others on here with the same ROM and KERNEL I used) seems to be different and unique. Something that ODIN won't cure.
vibrant2010 said:
Try to go to eugenes forum and he has a file to download...it is his unofficial jk2 froyo rom. Don't use the old "froyo that does not brick" Try to flash that in ODIN. I just used it tonight when I got stuck in stock recovery with a MBR Check sum failure. That should get u back to where u can fix ur phone. Also I don't click the repartition button in ODIN just causes problems for me. If u need anything feel free to P.M. me.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Yes, tried that too. Same result. Vibrant.. then shut off.
Thanks anyway.
I had actually just had Bionix-v 1.2.1 and the new DoW combo to try out Voodoo Sound. I really loved the sound quality, but battery drain was not adequate as being my daily driver, even though I set it to run at 1ghz and used a sleep profile. After just over 2 days of use, I backed out by ODIN'ing to JFD and I installed Bionix-v 1.2.1 again. Only thing I have noticed so far is GPS not initiating immediately after it's turned on. I would go into GPS Test app, and turn on GPS after the app is started, but I get no satellites for at least 1 min. I used to get a lock within seconds, not minutes. I will try ODIN again tomorrow and see if it fixes. I guess I was lucky enough not to get a bootloop again though.
But I can't see why you and I would have any issues after the Bionix+Dow combo. Wouldn't ODIN just clear everything up? I even repartitioned when flashing, so my guess is that my system, data, datadata, etc., are all reformatted completely? Am I missing something?
I had the same problem. I flashed DoW and then the next day my phone didn't want to turn on. I pulled the battery and restarted it. It didn't want to start up all the way. It got to the vibrant screen and shut off. luckily for me, my replacement phone that I ordered a week ago came in the same day. I sent off my old phone letting samsung/tmo take care of it.
This exact same thing happened to me.
I too had the phoen bricked after flashing the DOW after Bionix 1.2.1
I have been flashing since the G1. This is the first time I've ever bricked a phone.
Hoping to get it fixed this weekend
Yo OP
Coming from a very scary brick my self, (phone wouldnt even turn on, bad dead horse test).
When your using Odin, are you using v1.7, are you using the correct stock JFD tar, when you repartion, are you using the correct pit file. Sounds to me that your partions are screwed, so try the pit approach first. If you phone wont boot at all after this, with odin open go into download mode by holding the vol rockers only, and plug USB in.
Then flash JFD.
black spirit said:
Yo OP
Coming from a very scary brick my self, (phone wouldnt even turn on, bad dead horse test).
When your using Odin, are you using v1.7, are you using the correct stock JFD tar, when you repartion, are you using the correct pit file. Sounds to me that your partions are screwed, so try the pit approach first. If you phone wont boot at all after this, with odin open go into download mode by holding the vol rockers only, and plug USB in.
Then flash JFD.
Click to expand...
Click to collapse
I spent over 12 hours working on this when it happened to me yesterday. Tried every tar and pit file and all versions of Odin I could find. There is no way to fix it with Odin. It is BRICKED!
If you have not already done this, I recommend doing this: http://forum.xda-developers.com/showthread.php?t=954509
Bay Wolf made a nice software for the computer that pretty much shows you a step-by-step instruction on how to flash to stock, reroot, and flash the new ROM of your choice. This program will push you into download mode, clockwork recovery, etc. There is a video on that link that will also show you a step-by-step instruction. Try that out if you haven't, and let us know how it goes.
That program comes with a PIT and TAR file for you to use as well.
Even if you say it is, this is not a Development thread and belongs in one of the other forums. I understand your frustration, however TW did not flash your phone, you did. Coming on here with a "PSA" that their ROM or Kernel loaded itself on your phone and broke it is not the way it should be done. Did you, before posting this, go to the TW irc for help or pm Sombionix or any other TW Dev?
Since you can Odin, Odin to stock 2.1 then connect to KIES mini while in download mode, if you can, and take the OTA.
drewdude007 said:
I spent over 12 hours working on this when it happened to me yesterday. Tried every tar and pit file and all versions of Odin I could find. There is no way to fix it with Odin. It is BRICKED!
Click to expand...
Click to collapse
I thought the same when it happen to me.
Nothing would work, but went that approach and happy days.
s1_odin_20100512.pit
and
T959UVJFD.tar
are the only ones you need, and if your good with your flashing, just do a pit first, no pda.
And if your still getting to download mode, ect, and dont have the computer /!\ phone icon on the screen, sounds like a soft brick.
jellette said:
Even if you say it is, this is not a Development thread and belongs in one of the other forums. I understand your frustration, however TW did not flash your phone, you did. Coming on here with a "PSA" that their ROM or Kernel loaded itself on your phone and broke it is not the way it should be done. Did you, before posting this, go to the TW irc for help or pm Sombionix or any other TW Dev?
Since you can Odin, Odin to stock 2.1 then connect to KIES mini while in download mode, if you can, and take the OTA.
Click to expand...
Click to collapse
I see where you're going, but he did not blame TW or anyone else. He may just be warning some people/asking for help. I do however agree that he posted in the wrong section.
Also, why would he need to pm sombionix or a TW dev before posting this?
SamVib said:
I see where you're going, but he did not blame TW or anyone else. He may just be warning some people/asking for help. I do however agree that he posted in the wrong section.
Also, why would he need to pm sombionix or a TW dev before posting this?
Click to expand...
Click to collapse
Because he started off with his problem stated as:
1. flashed the latest Bionix
2. Worked great, some bugs, but for the most part without incident.
3. Flashed new DOW Kernel,
Your phone probably IS charging.
Your /efs nodes may be messed up. Do you have a backup of your /efs?
Try reading here: http://forum.xda-developers.com/showthread.php?t=859914
(So because all i have is Microsoft paint and i couldnt get a banner made otherwise, i present to you....my banner....as if it were done by me in the 3rd grade . And yes I left out the "t" just for to be a smart ass ^_^)
{EDIT:Oh look at me.. an edit at the top of the page! I just thought I would mention that while i did include a fully working install guide in the downloadable package I put together, this page will always have the most up to date guide and info on installation and how NOT to brick your phone. Alright please resume your regularly scheduled activities }
Hey Guys!,
Since theres SO many people trying to flash the I9000 Release of gingerbread JVB with xcaliburinhand's kernel I decided to write a little tutorial and I have uploaded a pack with EVERYTHING youll need to flash I9000 2.3.3 Gingerbread NEE (WITH Bootloader) and the ReOriented Kernel.
Heres a little info before you get started
2.x download mode button combo Volume up/down and plug in usb cable
2.3.3 download mode button combo is Volume down + power button no usb needed
2.3.3 recovery hold power and volume up until you see the screen turn on, then release power and continue to hold volume up until you see recovery
2.3.3 USB settings are in Settings>Wireless and Network>USB Settings
2.3.3 debug mode settings>applications > development
DISCLAIMER AND WARNING
IT HAS BEEN BROUGHT TO OUR ATTENTION THAT USING THE 3 BUTTON ODIN JF6 FLASH TO STOCK 2.x WILL BRICK YOUR PHONE BEYOND REPAIR FROM NORMAL METHODS INCLUDING DOWNLOAD MODE JIGS!! PLEASE USE THE 1 CLICK ODIN TO RETURN TO STOCK 2.x, AND THEN FROM THERE YOU MAY USE ODIN WITH THE 3 BUTTON FIX!!!!
AND AS ALWAYS! IF YOUR DOG BEGINS TO VOMIT PEA SOUP,YOUR GRANDMOTHER ROBS A BANK, YOU GROW A SECOND HEAD OR YOUR PHONE BRICKS I AM NOT RESPONSIBLE! YOU HAVE BEEN WARNED!
--------------------------------------------------------------------------
####################################################
THIS IS THE ODIN YOU WILL WANT TO USE TO RETURN TO STOCK!!!! USE THIS ONE AND NOT THE 3 BUTTON ODIN. IF YOU NEED THE THREE BUTTON FIX JUST USE THE 1CLICK ODIN FIRST THEN USE THE 3 BUTTON FIX ODIN
####################################################
-----------------------------------------------------------------------------
DOWNLOAD LINK
http://www.mediafire.com/file/uo180597pp3hprp/Flashing%20GingerBread%20I9000%20With%20REorient.rar
UPDATES
xcaliburinhands Kernel updated from 4/25/2011 see change log
vG.1.1
-Voodoo color fix
-Voodoo sound v8
-Compilation optimizations
-Call audio through dock
http://etc.muteheadlight.net/android/I9000_reoriented_vG.1.1_novoo.tar
MIRRORS
http://arnav.laxsav.com/MISC/Flashing%20Ginger Bread%20I9000%20With%20REorient.rar
Thanks to xtremekilla09 Of TeamPhoenix for the mirrors :]
List of included Files.
GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe
s1_odin_20100512.pit
CWM Flashable Zip to Enable CRT animation "Enable CRT Lock.Zip"
modem_ugjk4.zip (JK4 Modem)
update-xvjvb-home_button_fix.zip (Xcals fix for the non working homebutton)
zImage-root.tar (FuguRoot Odin tar File for Rooting after Install)
I9000_reoriented_vG.beta2.tar (xcals Beta 2 kernel)
ODIN3 v1.7 (if you dont know what this is PLEASE dont even try to flash this yet )
Tutorial Txt file for how to flash ginerbread
Tutorial Txt file for how to root Post install of 2.3.3
I will post the tutorials here also incase you already have everything you need and just need some help!
----------------------------------------------------------------
How to Flash Stock 2.2.3 I9000 NEE GingerBread WITH BOOTLOADER
1. Wipe data and cache/Factory Reset with CWM. (pull battery when complete to shut off phone)
2. Find the "GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe" file and click it and extract its contents into its current folder.
3. Open up Odin 1.7 and now select the 512 pit file I included, and select all the files in the necessary place in Odin and make sure "repartition" is selected". your odin should look like this http://d.pr/Ixt2
4. Put Your phone in download mode and connect, now hit start. (THIS IS WHERE THE ONLY DANGER IS, YOU ARE NOW FLASHING 2.3.3 AND THE NEW BOOTLOADER INCLUDED WITH 2.3.3 Just dont unplug your cable or have your computer die, otherwise you will be 100% Clear)
5. Boot up normally and let things settle.
6. now power off the phone and wait for it to shut off completely. at this point hold down "Volume down and Power" at the same time and wait till download digger appears. Open up Odin and select the 512 pit and xcals kernel(In the PDA box) I included and DE-select repartition if it auto selects and go ahead and connect your phone (Obviously needs to be in download mode) and flash.
7. The phone will reboot and once again let things settle (media scanning and whatnot). Plug in the USB cable and transfer the folders included in this pack named "Fixes and modems" and also "For Rooting" to your phone. then power off the phone once again. this time hold down "Volume Up and Power" as soon as you see the screen turn on let go of the power button and continue to hold volume up until you see CWM.
8. at this point you should be in CWM (Woot!). navigate to flash zip from SD and then navigate to the folder "Fixes and Modems" and flash "Enable CRT Lock.zip" and "update-xvjvb-home_button_fix.zip" and I recommend flashing "modem_ugjk4.zip" as JK4 seems to do the best.
9.Reboot. At this point reboot and you should be on stock 2.3.3! Congrats!!
10. If you want to root read the txt file i included for rooting!
----------------------------------------------------------------------
Step Two! ROOTING!
1. I have included the file "zImage-root.tar" in the folder "For Rooting" which i already had you copy to your phone in the original instructions for installing 2.3.3 included in this pack!
2. Go ahead and power off your phone as you will need to go into download mode for this.
3. Open Odin again and once again select the "512 pit" file included and in the "PDA box" select the "zImage-root.tar". Make sure that repartition IS NOT selected.
4. Go ahead and put your phone in download mode and connect it up and hit "Start" !
5. (Dont Panic!) After it completes it will take you to the charging screen and will not boot up, ITS NOT SUPPOSED TOO, it just installs Busy box, SU, and Root.
6. at this point unplug your phone and close odin
7. now ONCE more go ahead and REOPEN Odin again.
8. Select the File "512 pit" and the kernel "I9000_reoriented_vG.beta2" (PDA) in the folder "Kernel Beta 2" (once again making sure repartition isnt selected)
9. Put your phone in download mode and reconnect and GO GO GO! Hit Start
10. Let it boot normally and Voila you are officially rooted.
___________________________________________________________________
If you need anymore help feel free to catch me on IRC at irc.shadowcard.net port 6667 channel #firefly
Awesome, let the GB frenzy begin.
Update
Version 1.1 of the pack and tutorial - Fixed a wording issue that caused confusion.
thanks sir
Downloading now, weill report back about it all later.. Thanks a million for this !!
Followed instructions to the T. Just flashed CWM stuff and rebooted. Gonna toy with it a bit and report...
THIS IS BAD ASS MY FRIEND!!! Installed SpareParts apk and set windows to fast. This HAULS! You can even change lockscreen wallpapers under display options. DID I MENTION ITS BAD ASS?!?!
Sent from my GT-I9000 using XDA App
Absolutely love it, will test battery and stability and what not over the coming days but I think I'm in love again LOL
Thanks a million HaiKaiDo, wonderful work
Facebook check in actually finds me! (Unlike modded roms)
Sent from my GT-I9000 using XDA App
Thank you kindly!
Awesome! glad everything works good and the tutorial is an easy read . Im currently re uploading the pack with the changed wording for the tutorial.
Edit: Pack updated. Anyone feel free to let me know if they come across any problems.
Thanks for the info, followed the information as instructed and *POOF* there was gingerbread.
Holy ****, downloading now.
Herp derp Captivate XDA app.
pizz0wn3d said:
Holy ****, downloading now.
Herp derp Captivate XDA app.
Click to expand...
Click to collapse
woot, lemme know what you think of the guide :]
very nice guide. already running continuum 5, but nice guide
Great guide, but obviously the stock experience wouldn't live up to those of a custom ROM. What steps should we take to flash i9000 GB ROMs?
I just thought I"d post one "problem" from when I got up and turned on my phone.. for whatever reason (I have an idea) I keep getting FC of the Notification bar and email.apk ... I have a feeling it has to do with my tibu restore...I'm going to reflash some stuff and see if it fixes it.. I tried a few clear cache and dalvik cache but that didn't help, I want to do a master reset but a bit scurred. I'll wait a bit and see if anyone has any ideas before I jump ahead. I can use my phone with no Not bar for a bit LOL
Thanks in advance
spinz said:
I just thought I"d post one "problem" from when I got up and turned on my phone.. for whatever reason (I have an idea) I keep getting FC of the Notification bar and email.apk ... I have a feeling it has to do with my tibu restore...I'm going to reflash some stuff and see if it fixes it.. I tried a few clear cache and dalvik cache but that didn't help, I want to do a master reset but a bit scurred. I'll wait a bit and see if anyone has any ideas before I jump ahead. I can use my phone with no Not bar for a bit LOL
Thanks in advance
Click to expand...
Click to collapse
I had no issues when I restored but I only restored apps no data of any kind.
Ya...i dont know i only restored apps...not doing data i know better lol anway i did a factory reset via cwm and im back in action...ill restore slowly from tibu
Sent from my JVB Captivate using XDA App
I let mine sit off all night, still no FC's since installing. Only issue is the rotation. Had to turn off in settings since whenever I go to settings it's in landscape mode. Mildy annoying when I want the web in landscape but if that's the only issue I have... I can suck it up lol
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).
That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.
i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match