ok, so i used lokiwiz and i got my code thingy. After that i put in a tmobile sim card and it went but didnt ask me to enter the code, so i tried making a phone call. It went through, and also stated under something that i was using tmobile..... was my phone unlocked from the beggining? Also, how can i find out if it is unlocked? thanks
bump..... anyone wanna tell me?
yes you did unlock your phone otherwise when you put your tm sim in it would ask for the lock code.
i used the unlocker on my hermes and it didnt work, now i have the unlock code for it and when i put my sim acard in it wont ask me for the unlock code like its supposed to. so to anyone that knows, could you please tell me either how to "relock" my phone, how to get my phone to ask me for the unlock code, or even get it back to complete factory settings?
Guys
I've searched the forums and realise I can buy a SIM unlock code for my Blackstone, however I'm trying to clarify the following.
1. If I install a different ROM do I still need to buy the unlock?
2. If I changed the EMEI (I want the phone to match my in car fixed EMEI - I realise the blackstone has to be switched off when in the car else conflicts) does that mean the phone has to be unlocked again?
3. Once the phone has been unlocked if I change the ROM will it have to be unlocked again?
What prompted the question is reading the Wiki few areas actually simlock the phones....therefore my assumption is a different ROM means it could become unlocked.
Thanks in advance for the help.
Regards
Its an unlocked phone my friend so obviously you pay a higher price for the phone itself able to use with any sim card. Carriers phone that are branded with the carrier logo are usually cheaper with a plan that could cost more then the phone overtime and is locked to the phone carrier which requires a sim unlocking code to use with other sim cards/ other carriers.
The answer to that is you can install any rom on the phone and if it an unlocked htc touch hd which you paid a lot for then it will be unlocked forever
if its locked to a carrier im not sure about that maybe someone can clarify.
any ideas please guys, I get the phone in a couple of hours.
bump
Anyone?
Try to keep this short
1. If I install a different ROM do I still need to buy the unlock?
No Simlock is based on the radio and hardware (short version).
Once unlocked yoiu can up your rom and your radio, it stays unlocked.
2. If I changed the EMEI (I want the phone to match my in car fixed EMEI - I realise the blackstone has to be switched off when in the car else conflicts) does that mean the phone has to be unlocked again?
Got me lost on this one.
Simlock is based on radio and Hardware.
So your IMEI is part of the phone which is either Sim Locked or not.
If you put your sim into what ever is in phone is in your car your number will be the same.
Once you have sim unlocked a device it remains unlocked.
Like I said you lost me.
3. Once the phone has been unlocked if I change the ROM will it have to be unlocked again?
No - Once done it remains unlocked regardless of rom or radio upgrade.
(and if you buy a new Simlocked Blackstrone you cant use your old code as the lock is based on the hardware)
What prompted the question is reading the Wiki few areas actually simlock the phones....therefore my assumption is a different ROM means it could become unlocked.
--->point me to the page that you feel needs updated, i will have a go at it.
(please PM me)
Ok.. sooo.. Some people have gotten the JIC ota update from tmobile USA.. Well i decided to go ahead and update it. Well I lost the carrier unlock on it now.
I was just the stock rom on it rooted and unlocked using the one click unlock to get teh codes to unlock the phone. It worked then. Now with the JIC6 update i have lost that unlock. Also the one click unlock app to get the codes no longer works. I have also seen other post about using a hex editor to look at the nv_data.bin file to look for the unlock codes (no success). I have the original code from before the update, but it does not work. Is there a Way to unlock the vibrant with the JI6 update?
Just enter the same code you got last time. and it will unlock you.
If anyone else reads this. Please keep your code. and put it someplace safe. everytime you flash you will need to re-unlock most like a iphone.
Interseting that i didnt even have to reenter it. First when i updated and than checked teh network lock code showing that it was on so i than proceded to use the one click unlock app and it didnt not work. SO lucky for me i have a screenshot of the code when i first used the unlock app. so i did the same process and put in another carrier sim and entered the unlock code. It told me it was unsuccessful. Now that i went to try it again after my first post. I procceded to put in the other carrier sim card and it was unlocked.
Oh well. Thanks!
rhcp0112345 said:
Just enter the same code you got last time. and it will unlock you.
If anyone else reads this. Please keep your code. and put it someplace safe. everytime you flash you will need to re-unlock most like a iphone.
Click to expand...
Click to collapse
He says in the OP that he has the original code, but it doesn't work.
I know this is actually a known Samsung problem that has happened on many of their phones (even ones that came unlocked from what I've read) & generally re-entering the key works.
If it doesn't work for me, I'll call up TMO & complain. I bought the phone at retail price off contract, so they should give the code w/o a problem.
Generally as long as you've been a customer with them for at least 30-90 days (and your phone is beyond the returnable period), they'll give the unlock code if you call & ask for it. Sometimes you have to say that you'll be travelling out of country in order to get them to give it to you.
Is there a way to unlock without putting in a foreign SIM?
WTF !
Do you mean that updating the device to JI6 will lock the phone ?!
I unlocked mine with a code is that means I'll lose the unlock ?!
I discovered this a few weeks ago. I was working on a fix when I bricked my phone.
I just got my replacement on Tuesday and will be continuing the fix.
What happens is either something within the ODIN process, or on the rom itself puts a generic bml3 block on that contains all F's where the unlock code is stored.
I also know that it's stored on the nv_data.bin in the ./efs block.
I have been able to get my unlock code to be seen by the sgux program when modifying the bml3 file and pushing it back to my phone.
I will be working on nv_data next, though, seeing as my new phone has the unlock codes already, I'll have to do some editing and backing up.
I have my old codes with me so can someone confirm if old codes still works after the update ?
Thanks for sharing the information with us regarding phone. It may help us n the future.
Steve
mohitmoudgil said:
I have my old codes with me so can someone confirm if old codes still works after the update ?
Click to expand...
Click to collapse
Yeah after my original posts i think your old code will work. It will probably give an error of that it was unsuccessful. Just ignore it. and and just reboot the phone.
so basically to recap what i did.
updated JIC6 ota with tmobile.
checked network lock *#7465625# ( showing that the network lock was on.)
tried that software one click app to get code. (unsuccessful)
powered off phone
put in another carrier sim card.
bootup phone.
put in old code i had from before update to jic6 ( says that it was unsuccessful )
power off phone
put back Tmobile sim
power off phone
put other carrier sim in
unlocked!
i dont have tmobile sim ...do you think it needs that ?
I ran into this on my old vibrant running jfd. Unlocked and rooted and I needed to reflash jfd with odin. Phone relocked itself even reflashing same firmware. Efs data didn't change because the unlock code could still be retrieved. But when I inserted my att sim the code unlock said unsuccessful no matter what I tried. It never unlocked again.
sabooher said:
I ran into this on my old vibrant running jfd. Unlocked and rooted and I needed to reflash jfd with odin. Phone relocked itself even reflashing same firmware. Efs data didn't change because the unlock code could still be retrieved. But when I inserted my att sim the code unlock said unsuccessful no matter what I tried. It never unlocked again.
Click to expand...
Click to collapse
So old codes didnt work for you and you are stuck.
can anyone confirm if we should update or not to remain unlocked ?
anyone confirming this ?
I got two different statements here
Ok, I updated my vibrant to JI6 today and it didn't lock my device !!
Since I don't use T-mobile data plan so I downloaded the leaked rom from (Vibrant Android development) section then I flashed the stock rom followed by JI6 ROM and it's working perfect !!
Maybe because mine is unlocked officially by T-Mobile code !
Or may be only ota is locking
We need more info
Sent from my SGH-T959 using Tapatalk
Updated mine through odin.. still unlocked.
thanks...i just updated with odin and mine is unlocked
Now time to check whats new :d
They will not release a code nor will att for 9 months after the phone is out. You may call and ask.
Thats why i offer unlock services for these phones.
Successful OTA update yesterday, NO NETWORK LOCK, phone was rooted with no lag fix
As of this point the warranty on it has long since expired (for both Motorola and Target, the place where it was purchased) so we're pretty much willing to try anything to get it working
I've got with me here a G5 Plus XT1687 that, at best, I can describe as being in a state of "limbo". Its bootloader mode can only be set to flashing_unlock and flashing_lock. We've obtained the unlock key from Motorola's tool and have tried fully unlocking the bootloader multiple times following the guide on XDA, but it seems to not want to accept the command fully and remains on flashing_unlock. When I try to relock everything to start over, it gets stuck on "flashing_lock" and won't go back to fully locked. When it's in the flashing_unlock state I am able to flash ROMs and TWRP builds, so technically it's unlocked.... sort of. I'm unable flash SOME things, like new bootloaders or gpt partition tables, but other things will work just fine, albeit with the occasional "invalid signature" message following flashing. But this right here is only the start of our problems.
Having purchased the US retail XT1687 model, it was supposed to come carrier unlocked out of the box. My friend who got this didn't have a SIM when he got it at the time, so he just used it as a WiFi-only media player sort of thing. When he finally got a T-Mobile SIM and put it in, it asked him for an unlock code. This of course doesn't make any sense, because we didn't get this from a carrier, so why would it be locked to anything in the first place. It was tried with multiple different SIM cards, running multiple different ROMs (and even stock firmware) all with the same result: the phone seems to be network locked to nothing at all.
I tried calling Motorola and they said they can't make an unlock code for us since it's the carrier that decides what algorithm to use for network unlock codes... but this phone didn't come from a carrier, so I don't know what to do.
Fixing the bootloader thing would be nice, but my main goal here is to try and remove this nonsensical network lock so my friend can actually use it with T-Mobile. At this point he doesn't want to send it back (since we'd have to pay for the repairs, and he got a cheap LG to use as a primary phone anyway). That being said, we're pretty much willing to try anything to get it working. Any suggestions?
EDIT: just want to mention as well, we've never had a problem with the IMEI being set to 0. It's always been what it originally was