Related
I am having problem updating to 2.340.
I just got a replacement DX from Verizon few days ago. As soon as I received it, I tried to do an update but the system said that I was up to date even though my software showed 2.315 so I decided to mod my DX right away since most people did not have problem updating with rooted DX.
Initially, I rooted my phone with Z4ROOT, reinstalled all the apps using Titanium Backup which i had on previous phone since I all the backups on my
SD card than I back up the stock ROM with Rom Manager. After that, I installed Bazinga2.1 Rom. Installed my apps again using titanium back up and back it up again using ROM Manager. After this, I installed BigDX blue theme. Couple a days ago, I got a notification that I have an update from Verizon which was 2.34 so I went back to recovery, restored back the Stock, using Z4Root, unrooted and download the 2.34 update and tried to install but the update failed. So I did a factory reset and put every thing back to stock and tried to update again and it still fails.
Once the update is down loaded, I try to install and its turns off the phone, than it shows a box with android next to it and it shows triangle with Exclamation and just reboots. Than it goes to clockwork mod recovery.
Why does my phone go to clockwork recovery even though I am UNROOTED?
Any help or input will be greatly appreciate it.
Thanks
johann718 said:
I am having problem updating to 2.340.
I just got a replacement DX from Verizon few days ago. As soon as I received it, I tried to do an update but the system said that I was up to date even though my software showed 2.315 so I decided to mod my DX right away since most people did not have problem updating with rooted DX.
Initially, I rooted my phone with Z4ROOT, reinstalled all the apps using Titanium Backup which i had on previous phone since I all the backups on my
SD card than I back up the stock ROM with Rom Manager. After that, I installed Bazinga2.1 Rom. Installed my apps again using titanium back up and back it up again using ROM Manager. After this, I installed BigDX blue theme. Couple a days ago, I got a notification that I have an update from Verizon which was 2.34 so I went back to recovery, restored back the Stock, using Z4Root, unrooted and download the 2.34 update and tried to install but the update failed. So I did a factory reset and put every thing back to stock and tried to update again and it still fails.
Once the update is down loaded, I try to install and its turns off the phone, than it shows a box with android next to it and it shows triangle with Exclamation and just reboots. Than it goes to clockwork mod recovery.
Why does my phone go to clockwork recovery even though I am UNROOTED?
Any help or input will be greatly appreciate it.
Thanks
Click to expand...
Click to collapse
Root and the bootstrapper are separate entities. Removing root, and removing the boostrapper manually (by renaming files in the system) will not fix your issue either.
The reason I know this is because I went through a number of ways to try to get the OTA, but could not.
I would suggest you hit MDW and get all of the latest files for the update, and do it that way.
You'll sbf, flash the leak for .320, then sbf .320, then flash the system for .340, then update the kernel, and radio afterwards. After that, you'll be back on the normal track.
It's a lot of steps, I guess, but it really doesn't take long.
Go grab the files ASAP, in case they get pulled, and follow all of the instructions carefully.
Whats MDW and why am I having this problem when everyone else is not. also, I removed Boostraper and it still go into recoverymod? I am just going to SBF reflash to 2.315 and see if it will work.
Here we go again!!!
Lots of people had that issue.
Mdw is mydroidworld.com
Sbf all you like. I stand behind the advice I gave.
Also, if you had actually removed the bootstrap correctly, you couldn't possibly still end up in clockwork.
Either way, in about the time it took you to post, you could have used the steps I suggested and have been done.
Sent from my DROIDX using Tapatalk
I'm in a bit of a hurry so I haven't read the whole thread thoroughly, but if you're just trying to get it to stop booting into CWM, go to terminal emulator
Run "su"
Run "mount -o remount,rw /dev/block/mmcblk1p21 /system"
Run "cp /system/bin/logwrapper.bin /system/bin/logwrapper"
Reboot
bladebarrier said:
Lots of people had that issue.
Mdw is mydroidworld.com
Sbf all you like. I stand behind the advice I gave.
Also, if you had actually removed the bootstrap correctly, you couldn't possibly still end up in clockwork.
Either way, in about the time it took you to post, you could have used the steps I suggested and have been done.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Thanks for the advice but I SBF my phone back to 2.315, than tried to do update again and it worked.
Hello, I rooted my phone about a week ago successfully. I then installed the fission 2.5.7 Black edition which I like a lot. Then I decided I need a backup, a clean backup that is of none my personal settings, of the original stock android, and as well as to verify the original version of my android OS. I did that successfully as well. Wanting to see what Gummyjar looked like I installed it successfully as well and gave it a good look over. I then decided to go back to my fission 2 .5 .7 Black edition and this is where my trouble begins. Using ROM manager I click on the restore manage backups like I've done many times, click on the backup I wish to restore, it asked a couple usual questions then reboots. Within a few minutes I get the GummyJar boot logos, and goes right into the GummyJar OS. As though I did not do anything but a regular reboot. No matter what I do, try to install a new ROM, it just reboots right back into GummyJar. While I am new at this I have installed a couple ROMs successfully, as well course, rooted my phone, however I don't know what to do here or if there is something inherent with GummyJar that I need to do. I could I think, do a battery pull and bring up my emergency menu, but thought I would try this forum first. GummyJar is nice but I don't like being stuck with, even if I wanted to keep it. In any case I do not want to keep it I like fission 2.5.7 Black edition the best of them all so far. Original OS 2.3.20
Now Gummyjar
Trying to get back to fission 2.527
Used fission rom manager 1.2.4 lite < installed fission 2.5.7
Used Rom Manager 3.0.0.7 to create and restore roms
Any Help? Thanks much
Steve
Guess that did it
I deleted and reinstalled Fission lite and rom manager. Much to my surprise this SEEMED to do it. I have a hard time thinking this fixed my issue but it is working now and I am back to fission 2.5.7 black edition. So if this helps anyone else good, still though was a strange problem.
Thanks
Steve
So i was on liberty rom 2.0.1 and wanted to upgrade to the latest version in the nightlys. So i SBF back to version 2.3.320.MB810 and when i go to settings -> about phone -> systems update, it says i am already up to date. Can i get to gingerbread from this version or do i need to sbf to 2.3.340 to get to gingerbread.
I think you have to be on. 340, but I wouldn't encourage you to take the OTA to GB, download a prerooted .596 GB (team black hat...) then go from there.
Sent from my Xoom using XDA Premium App
So i sbf to .340 and tried to install the tbh .596 GB update, with the part1 and part 2 files. When i boot into recovery and try to apply the zip it give a error code of 7 during validation of the current system. According to the instructions the only thing i am not doing exactly is i am using the droid x boot straper not the droid 2. would that cause this. dont see the need to spend 3 bucks on something i already have
Try turning off USB Debugging prior to booting into recovery. I think I read somewhere that Droid X bootstrapper works fine as long as you do that first.
Ok so i hope someone can help me out on this i finally got to a TBH rooted GB install.
My next step is to get back on liberty because i just cant stand motoblur, gingerblut is a bit better than what came with froyo but it still sucks. the battery life is terrible and i cant stand all the bloat ware and crappy widgets.
I am not sure what issue i am having 3g data worked fine in liberty GB0.4 but if i ever moved past that it would stop working. So i spent a day and sbf to .340 then installed the TBH rooted stock GB. I then downloaded the libertyGB0.8 did a data wipe and installed it. No 3g data. I really love liberty have donated to them buying the pro toolbox and such. I really want to get back to liberty but i guess if i have to find a different rom i will . Anyone have any idea as to why if i go past liberty 0.4 i loose 3g?
Ok so this issue has expanded past just liberty. I tried to flash apex 2.0 rc1 with the same issue no 3g data. Phone calls and all of that work but no 3g data. i would really like some help with this dont want to get stuck on moto ginger. Will more than likely just go buy a different phone if i cant get this to work
You just need to flash the updated kernal. I had the same problem, and fixed it. let me see if I can find the thread with the info. All u need to do is download the zip file, put on sd card and flash. and itll work just fine. Ill look it up and post back. The 591_kernel_update.zip is what you need
Here is the file:
http://www.droidforums.net/forum/liberty-rom-dx/151857-no-3g-liberty-gb-0-7-a.html
Hey guys, I just wanted to share my experience so far. I can't post on the MIUI page because I don't have enough posts, so I'll share here for anyone interested.
For anyone wanting to try MIUI for the DX, here's my experience, some tips, and suggestions.
-Beware, installing or trying to install ANY ROM may brick your phone. although it's very rare and unlikely to be unable to find a solution to problems, it can and has happened. so take caution and read instructions and so-forth carefully.
Some history of my DX. I soft-bricked my phone back in the early months of the DX trying to deodex it to install themes. It was stuck on M logo for 2 days before i learned enough from scratch to find out what an SBF was, where to find it, and how to flash my phone back to stock. Ever since then these nice folk on XDA-developers forums and other droid forums have helped me successfully mod my phone many times, through Q&A, detailed instructions, and a little luck.
I've rooted my phone using the command method, Z4Root, and several other processes. Some were hard to figure out, some soft-bricked my phone, most were easy as pie. I'm on a Z4Root atm.
The first successful ROM I installed was GUMMY-JAR. I liked it, it was good to me. nothing like the comprehensive ROMs out now though.
Then I jumped to Liberty 1.5, Liberty x.x etc... Liberty was awesome, but was still basically Froyo with advanced options. I loved it.
Now, just today, I've installed MIUI. And let me tell you, its amazing!
For anyone running Froyo Liberty ROMs, I believe that you can install MIUI right over the top. I didn't think it was going to work, as I hadn't seen anyone mention if it did or not over the top of Liberty 1.5.
If you want to install MIUI, go here. http://forum.xda-developers.com/showthread.php?t=1181486
You MUST be rooted, and be running FROYO, NOT GB! You must also have the Droid X bootstrapper.
I won't give instructions, as I'm not qualified to do so. But I can tell you what I did from Liberty 1.5. MAKE SURE TO MAKE A BACKUP FIRST! 1) I downloaded the MIUI ROM from the above XDA post to my SD card on my phone. 2) I clicked 'bootstrap recovery' on the DX bootstrapper app, then 'reboot recovery.' My phone booted into clockwork recovery mode. 3) wiped data/factory reset. 4) cleared cache. 5) install from SD Card. 6) install MIUI.zip i downloaded from the link i posted above. let it run it's course. rebooted. DONE.
It's really that easy if you are running the DX stock Froyo kernal.
Keep in mind with MIUI, it does NOT auto-sync your Google account. you need to go into the options>>accounts/sync and add your Google account. You can then re-install apps from your backup or just re-download them. Make sure you've synced your contacts with your Google account so they will be there when you add your Google account.
Some thoughts on MIUI...
There is NO STOCK APP DRAWER. I recommend ADW launcher or Launcher PRO. The MIUI launcher inst bad, but it's like iOS in that there's no app drawer. It's just a bunch of screens with all your app icons like an iPhone.
You can download theme's and customize themes through settings>>personal>>theme manager. MIUI allows you to change fonts, boot animation, boot audio, lock-screen style, status bar, icons, launcher, wallpapers, text style, dialer style etc. There's tons of pre-made packages, but you can also change them all individually and create one you like best. You can do all of this directly from the settings menu including looking up new themes, downloading them, and applying them.
MIUI is running on 2.3.4 GB. So it wont say 2.2 anymore after you install. (I believe the kernal is still Froyo though? Please correct me if I am wrong)
I really hope this helps some of you newbies. I am thankful for all of you that have made posts like this that I have found useful in the past.
Note- some people are having issues installing MIUI. They are getting bootlooped on the M logo for some reason. I have no idea why this is, it worked perfectly for me first try. Just remember to follow the instructions on the ROM page, and that you are running the correct version of Android. You shouldn't get a boot-loop if you do so.
Hope this helps!
i have a question.... and this question is what will decide if i keep this or go back to liberty gingerbread....
how the hell do i flash anything.. i can't even install clockwork mod without getting bootloops.... and i'd love to flash certain apps onto this.... but if this can not be done i will have to go back.... the only thing going into recovery does is use the retarded original recovery... and that is a big deal.. if i ruin my phone on the go and need to pullup a backup i can not do this with this rom and i will end up phoneless until i can get to a computer to sbf
nosboost300 said:
i have a question.... and this question is what will decide if i keep this or go back to liberty gingerbread....
how the hell do i flash anything.. i can't even install clockwork mod without getting bootloops.... and i'd love to flash certain apps onto this.... but if this can not be done i will have to go back.... the only thing going into recovery does is use the retarded original recovery... and that is a big deal.. if i ruin my phone on the go and need to pullup a backup i can not do this with this rom and i will end up phoneless until i can get to a computer to sbf
Click to expand...
Click to collapse
What exactly are you asking? "Flashing" is the process of basically overwriting your current Android OS with an Android OS SBF. If you are trying to install MIUI, you cannot do it with Gingerbread installed on your phone. "You MUST be on CyanogenMod 7 or .340 Froyo to flash this rom!" (MIUI)
If you want to install MIUI, i think the best bet would be SBF flashing to stock DX 2.2 .340 FROYO, re-rooting, then using the DX boot-strapper to boot into recovery. Then installing the MIUI .zip from SDcard in the recovery menu. Everything should work fine after that. Rmember you CANNOT go into recovery using DX boot-strapper once this ROM is installed. you CAN go into recovery with this ROM using ROM-manager. This is what I have experienced so far, and what others have said also.
no.. i already have the rom installed... i just want to be able to go into recovery without needing to be booted up.
i'm trying to install some zips through clockwork such as the old blur camera and a few other things... i will install rom manager and see how it goes from there... i love the UI of this rom but as far as being comfortable and stable.. liberty gingerbread has my vote as of now
i've cleared my cache and data several times and i get force closes alot. and this is a clean install coming straight after an SBF.
with liberty gingerbread i had the ability to set it so every phone reboot, even if a battery pull, would boot directly into clockwork mod.. making it easy for me in case i installed a zip that would get me into bootloop
Hmm, sorry mate, I dunno what to tell ya. Try looking aroudn forums or startign a new thread. someone more knowledgable than you or me will help you out.
thanks for everything though!! this really is a beautiful rom and i'd love to stick with it... i'll bite the bullet for the meantime and post around to get some help... i'd love to post in the developer section but i don't have enough posts yet.. haha
nosboost300 said:
no.. i already have the rom installed... i just want to be able to go into recovery without needing to be booted up.
i'm trying to install some zips through clockwork such as the old blur camera and a few other things... i will install rom manager and see how it goes from there... i love the UI of this rom but as far as being comfortable and stable.. liberty gingerbread has my vote as of now
i've cleared my cache and data several times and i get force closes alot. and this is a clean install coming straight after an SBF.
with liberty gingerbread i had the ability to set it so every phone reboot, even if a battery pull, would boot directly into clockwork mod.. making it easy for me in case i installed a zip that would get me into bootloop
Click to expand...
Click to collapse
You need to install Rom Manager, and select flash Clockwork Recovery. Make sure you select Droid X (2nd Init). Then you can reboot into recovery with Rom Manager :-D
laxattack said:
You need to install Rom Manager, and select flash Clockwork Recovery. Make sure you select Droid X (2nd Init). Then you can reboot into recovery with Rom Manager :-D
Click to expand...
Click to collapse
but the problem is that i would like to be able to go into recovery without having to do it through an app... i'd like to make it so every reboot (including battery pull) makes it boot into recovery. thats how i had liberty gingerbread doing it... if not.. i can live with it.. i'll just be a little more careful on what i'm installing
Just wanted to chime in about MIUI rom, I just flashed it yesterday and am ABSOLUTELY loving it thus far. I had no trouble at all installing the rom what-so-ever. I used ROM Manager to do the whole thing: downloaded newest ver. of MIUI, backup current ROM, wipe data and dalvik. Let it run its course and it rebooted and was up and running in no time flat!
Up until today I never did anything to my droid x as far as rooting and roms. I kept everything completely factory and android was at its latest version which is gingerbread 2.3.3 and system version 4.5.605.MB810.Verizon.en.US.
My goal today was to finally experiment this and install Liberty Rom. I completely failed because of all the version complications and plenty of other errors. Before I describe my final problem I should backtrack and let you know exactly what I did today so you can possibly get me out of this mess.
1. The very first thing I did was follow all of the steps at a forum on droid-life "How To: Get Rooted Gingerbread On DROID X" sorry it won't let me post the link.
After all of this I ended up with gingerbread again, but I guess a rooted version. No idea why this was the tutorial I followed when trying to install liberty. Throughout the tutorial I ended up buying "Droid X BootStrapper" because the tutorial had me use it.
Right after this tutorial I bought an app called Rom Toolbox for $5.00 downloaded Liberty through it and was trying to install through it. Every time it rebooted I would get a black screen. Never worked so many issues probably because I flashed the wrong sbf or something.
Here are the programs that I ended up buying today:
z4root (free), DroidXBootStrapper ($2.00), Rom Toolbox ($5.00).
That is everything I have done and all of the apps I own. Can someone please start fresh and give me short instructions to start from scratch on how to get the latest and greatest version of Liberty on my droidx from where I'm stuck at now. I want to completely start over and I am willing to do anything. I hope the apps I bought help and I also want to assume 2 of them probably do the same thing and I didn't need them.
Buying those tools will at least help support 2 members of the community (Koush & JRummy).
I'm pretty sure Z4Root does not work on the GB versions of DX firmware. That's probably why nothing is working. You aren't actually getting root.
you are on the .605 version of GB (when you see references to .602, .605, etc ...)
To get root, start here:
http://forum.xda-developers.com/showthread.php?t=1258599
You may also want to download the Droid2 recovery rather than the DX. The D2 version is a little newer and I think avoids a slight bug on later kernels when Debug is on. The D2 version works just fine on the DX. It can be downloaded free from here:
http://www.koushikdutta.com/2010/08/droid-x-recovery.html
Once you are rooted and have recover properly working, you should be able to use the Rom Toolbox to download and install Liberty. Just make sure you read carefully about the 'version' requirements on any ROM.
Oh ok so I was rooting it wrong.
I easily rooted the phone using Pete's Motorola Root Tools. I realized that Rom Toolbox Pro accesses clockwork recovery when the phone is rebooted instead of the phone just restarting fully. But, I still want to start fresh and do everything from the start again. Please let me know if you have any suggestions in the way or order I am doing things. My phone is currently up rooted at 4.5.596 and rooted by Pete's Motorola Root Tools but I want to start over from the beginning so here is what I am going to do:
Note: Before I do anything I am going to format my SD card for a fresh start.
1. Use RSD_Lite 4.9 to Flash my phone back to 2.3.340 using a file called VRZ_MB810_2.3.34_1FF_01.sbf. I always do this part with no problem.
2. Do a hold power+home then search and do a system wipe/restore. Then Activate service, sign into gmail etc.
3. Now that the OS is loaded (the old version with the grey bars 2.3.340) I am going to root my phone using Petes Root Tools. (I hope I can root it with this tool when the firmware is this version.)
4. Put the 3 zip files I have on my SD card to upgrade to GB 588. Also put my GB 596 file on here.
5. I will download 1 app. D2BootStrapper. Bootstrap recovery, reboot into recovery. Install all 3 zip files from SD card. Now I boot up in GB 588.
6. Now I go right back into D2BootStrapper. Bootstrap recovery, reboot into recovery. Install GB 596. Now I have GB 596 rooted and loaded.
7. After this, shouldn't I be able to download Rom Manager Premium and Rom Toolbox Pro and test as many roms as I want? always reverting back to my original backup.
I noticed after installing liberty I was getting all kind of force close popups. And the phone wouldn't connect to service. But then I just held power + home then hit the up/down arrows and did a wipe/restore and it loaded liberty and everything works. Is this normally what has to be done when installing roms?
If there is anything wrong with my process please let me know. Whew I can't believe all that I learned in 1 day.
You've got a lot of steps there that really aren't necessary. When you install a ROM like Liberty, it replaces EVERYTHING in /system. Thus, about all that is left from a .596, .588, .602, etc install is the kernel. The Kernel doesn't change very often in Motorola builds. The last change was on .602. Thus, for your purposes there is no difference between .602 and .605 (FYI, .605 was just a keyboard fix over .602).
So, if you search around, you should find an SBF or AIO flash file to get you to .602.
Or you can simply take the OTA update from VZW after SBF'ing to .340
Once you've flashed your Rom, be sure to clear data/factory reset. You should then start with a clean system.
Alright, if you don't mind can you please let me know what steps I can avoid.
I didn't think it was possible to have a rooted .605 but I guess I was wrong.
So my goal should be to get to .605, then root it. Then install roms from there?
On your first post you said you were on .605. I'm assuming that is still the case.
If so, then root it with pete's tool (I think you've already done that).
Install D2bootstrap, then ROM Toolbox and install your rom from there.
I have to be honest, in that I've not used Liberty in a while, nor have I used Rom Toolbox. It shouldn't be a problem, just make sure that the version of Liberty you are using is for the GB kernel. Some of the older versions of Liberty (Which I did use, and like) were for the Froyo kernel (in that case, stay on .340 and do your upgrades).
Make sure you wipe data in recovery after installing the ROM. Lots of 'Boot Loops' are due to not wiping data after flashing a new rom.
Yeah
Yeah I read up on all of that. I actually might not end up going with Liberty. Going to try others like ICX. But before I do any of this I need to get to .605.
No I am not at .605 I believe that's where my phone was before I started all of this.
Right now I am flashing back to 2.3.34
Once I am back up and running there. Can you please recommend the easiest way to get to .605 and that will be my final question.
.605 should update automatic. If not you can disable the updater using titanium backup by freezing system updater.
1. Use petes tools install cwm as well
A. Droid x bootstrap get this
B. Titanium backup. Backup your apps
2. Make a backup using cwm and backup apps with tb
3. Put the rom zip files on the sd card.
4. Reboot to recovery. Reformat system data etc
DO NOT REFORMAT THE SD CARD.
5. Wipe cache davik etc.
6 flash rom. And reboot.
7 run tb for your apps
Should be a smooth and clean install. The roms are already rooted so no need to worry about that. Hope this helps
Sent from my MyTouch 4G Slide using xda premium
We aren't supposed to link to other forums, so expect this link to get removed.
http://rootzwiki.com/showthread.php?399-UPDATED-GUIDE-LINKS-DX-SBF-s
I would point you to a link here, but couldn't find a quick/easy link to what I wanted.
In this list is an SBF file for .602. Since you seem comfortable with doing SBF's, I would just SBF straight to .602 and root it from there.
Don't know much about ICX, but would encourage you to look at the CM7DXGB thread over at Rootzwiki as well.
ohh, well I just went to Settings > About Phone and its auto updating to .605
Am I not going to be able to root it after this update or should it be fine.
HunterT said:
ohh, well I just went to Settings > About Phone and its auto updating to .605
Am I not going to be able to root it after this update or should it be fine.
Click to expand...
Click to collapse
Pete's Root tool should root .605 just fine.
One last thing
As far as Clockwork recovery goes.
Should I always be in the latest version 5.0.2.0 (the blue version)
Or the old version 2.something (the green version)
Why is there 2 version and why would I ever want to flash back to the old version 2.something?
Zaphod-Beeblebrox said:
Pete's Root tool should root .605 just fine.
Click to expand...
Click to collapse
Pete's will work on .605 I did two the other day
Sent from my MyTouch 4G Slide using xda premium
HunterT said:
As far as Clockwork recovery goes.
Should I always be in the latest version 5.0.2.0 (the blue version)
Or the old version 2.something (the green version)
Why is there 2 version and why would I ever want to flash back to the old version 2.something?
Click to expand...
Click to collapse
Couple things most of the updates are to add support fix minor bugs etc.
I run the one from petes all the time I forget which version. I haven't had problems.
On my mt4g slide I had to flash a modified verson of clockwork due to my phone being newer and not as much support
With that said its not a difficult process to get a new recovery image. You would need terminal emulator and root explorer. Couple of great guides on here on how to do so. Also other methods as well.
All in all the ones that pete's give you should suffice. Unless your one of the extreame types of people who want the newest or like messing around.
Just remember backups can make the process and hassle of soft bricking your phone much easier to fix and takes a few mins to do.
Look around the forums lots of great information from the devs, experts, etc
Sent from my MyTouch 4G Slide using xda premium
HunterT said:
As far as Clockwork recovery goes.
Should I always be in the latest version 5.0.2.0 (the blue version)
Or the old version 2.something (the green version)
Why is there 2 version and why would I ever want to flash back to the old version 2.something?
Click to expand...
Click to collapse
The newer version changes the way backups are stored. The new format is smaller and quicker.
Among other issues/bug fixes as mentioned before, but the backup issue is important as the new version will not restore the old style backups.