Related
I have a noise problem, I don't think it's quite the same as previously posted noise problems.
I get a hissinh/static noise from the phones speaker (on the back) and from headphones. It is only happening while the phone plays sound (and some seconds later). Every time I up or down the sound with the volume keys, there are noise coming out of the speaker for some seconds. Please report if you have the same issue, especially eith headphones.
I could live with the speaker-noise, it's not that big a deal.. What's worse is it is in the headphones. I have a quite low impedance set of in-ear plugs from creative (I am able to hear the hard drive spinning up in my old mp3-player, but no constant noise) Crap. I want to use the phone for music listening. Question is: software or hardware related? Using JF 1.51 ADP for the record
I hope it is hardware related - I bought mine off ebay, allthoug brand new and everything, I don't know how I would go about getting it fixed/a new one with no receipt. Shipping it back and forth to England isn't really tempting either.
It's not just you, it's piss-poor rf isolation on the audio outputs. Listening with bluetooth doesn't solve the issue either as bluetooth has its own noise.
Yeah, I have yet to listen to a decent pair of BT headsets.
So this is a known problem, and it's definitely a HW issue? The fact that it's only there when sound is played, and is also there with a headset (where shielding around connectors is not and should not be a problem at ALL) made me hope this was softwar related. Argh, what to do then? The sound quality despite this seemed prety decent, although a headache today prevents me from really listening to music and say for sure. Shame.
*Pondering refund options.*
Any chance of isolating around the connector and fixing this, if it is "airborne" caused noise, or will the noice enter the equation before the connector (cabling, sound chip)?
I will try with a relatively high impedance headset (sennheiser 555) and see if it is better there. But can't take them on the bus anyway. But a couple of Ωs could always be added somewhere along the cable and might do some good. Have to have the sound at the lowest levels with the in-ears. Maybe a software fix to lower the volume output will help? Or won't it, if RF noise is the cause?
red: I will buy this item and hope it helps. And will look into lowering the volume output when using headphones as well. Should be possible (atleast it usually is with tweaks in WinMo.)
I have similar problem with HTC Magic: forum.xda-developers.com/showthread.php?t=633035
Here is one more post regarding HTC Jade: forum.xda-developers.com/showthread.php?t=463365
I have found some strange behaviour that i'm hoping someone else can test out on their Galaxy S.
I have found that some headphones seem to work fine with the phone for music playing but others result in the sound being distorted with the vocals being very faint as if the left and right channel are cancelling each other out (with vocals generally being on left and right channel).
The packaged Samsung headphones appear to work properly although the quality seems average. I tried my iPhone headphones but these resulted in the strange sound distortion described above. I also tried a pair of cheap Sennheiser which were a free give away with a purchase from Richer Sounds and they worked well. Another pair of no-name cheap headphones exhibited the same distortion problems as the iPhone headphones.
Oddly, the FM radio sounded ok with all the headphones, it's just the music player that has the problem. I have also tried a couple of other music apps including the doubletwist player to rule out the software.
I'm considering taking it back to the shop to swap for a replacement. I'd be grateful if anyone could try out some headphones (particularly iPhone ones) on their Galaxy S and report their results to see if this is just a quirk with my phone or the Galaxy S in general.
Many Thanks
I just need some clarification because I know that a headset, and not headphones, is delivered with the Iphone. If it was a headset then I might suspect that different Iphones use different polarity as opposed to Samsung. Try out the Samsung headset on the Iphone.
EDIT:
Obviously not the problem. I must have skipped over the radio experience.
I can't post a link to it, but I remembered that GSMArena did a thorough review of the SGS. If you find your way to it, go to page 6 and see the sound chart at the bottom. SGS is superior in sound to iPhone. Perhaps the iPhone headset/headphones and the cheap ones are not sufficient for the SGS? I'm guessing
I had a similar experience when I tried to use the Samsung Spica headset on my HTC Hero. It seems that it might be a difference in polarity as suggested above.
Does all the headsets that give distorted sounds have a microphone on them? (E.g. not headphones)
the iPhone's headphones have extremely high distortion regardless of the media using to play them. The SGS is probably just overpowering them because they are very loud headphones as well/easily powered.
No it's nothing to do with them being overpowered.
I have an expensive pair of etymotic in ear headphones that are exhibiting the very same problem. Strangely I found a fix. They have a microphone on them and pressing in the answer button on them seems to fix the problem. I have taped the button down now and everything works perfectly. The second that button is released though, everything goes back to being faint, muffled and distorted.
Odd!
PS. This isn't just with the music player. I noticed it first watching a video.
It sounds like Samsung has their own way of producing the 3.5mm port with regards to the microphone support.
The Samsung headset distorts music on my HTC Hero.
The HTC headset distorts music on my gfs Galaxy Spica
To be clear, are you saying the problem only affects headsets with microphones? I have etymotic er4p headphones and it would be a deal breaker if they didn't work right with this phone.
If its only showing up in the media player, check that you havent enabled the 5.1 button in the the top right of the player. This can really screw with the sound and entire frequency ranges can be lost. I'm guessing this is whats happening.
The default headphones work fine for me if a little tinny, but with my Senheissers, the results are very pleasing. Apart from a slight gap between tracks that should seemlessly play through, I prefer using it to my iPod Touch. Being able to change tracks and volume without unlocking is a nice feature.
I threw my iPod headphones out years ago, they're the most ridiculous design ever, with the cable tapping the inside sleeve all the time when you walk or run.
k2snowboards88 said:
To be clear, are you saying the problem only affects headsets with microphones? I have etymotic er4p headphones and it would be a deal breaker if they didn't work right with this phone.
Click to expand...
Click to collapse
It sounds like that the problem is with headsets with microphones, yes. Not sure if it happens with all 3rd party headsets w/ mic though.
Considering you have etymotic, and ClownShoes a few posts up have problems with this brand, I guess you're out of luck unless you wanna tape the answering button like he did.
The er4p is just headphones, so it sounds like i'm in luck.
Got my GS a few days ago and im having exactly the same problem with the Etymotic hf2 Headset with mic. So yeah it looks like it the mic that causes the problems.
sim87 said:
Got my GS a few days ago and im having exactly the same problem with the Etymotic hf2 Headset with mic. So yeah it looks like it the mic that causes the problems.
Click to expand...
Click to collapse
It's a little bit crude, but taping the button down does work.
I have the same issue with with Monster Studios even with the cable without the integrated mic. Would be great to have some sort of fix.
Headphone issues
Just thought I would post what I knew about the issue, both me and my dad purchased the same pair of headphones to use on mp3 players (the headphones are ultimate ears metro fi 220 vi's if I remember correctly, these have an in-line microphone as well as a single button for answering calls and to control music playback). Whilst I experienced no distortion when using them on my iPod Classic, my Dad's Creative player would produce the issues described above - he found that either taping the button down or slightly pulling the headphones out would solve the issue however it ended up annoying him so much that he went back to using another set of headphones.
I don't know what causes the issue but I just thought I would let people know
i have some sennsihaur sport headphones which work fine no problems. i also a monster fm transmitter in the car.. again no problesm.. just make sure the volume is not on max but 1 setting below max.
Hmmmm, a few problems here. Obviously the standard Samsung headphones are fine, no humming, no background noise. However if I connect the following:
1. Standard Apple iPhone (with mic) loads of background noise, humming etc
2. Shure (no mic) loads of background noise, humming etc
3. B&O (no mic) loads of background noise, humming etc
4. Shure (with mic adaptor) loads of background noise, humming etc greatly reduced by pressing the mute key.
Using the Shure adaptor with the others resulting in the same as 4.
Needless to say I'm not happy!
That's too bad. Not being able to use my Shure with the phone renders it useless for music and that IS important.
In the SERVICE MODE *#*#197328640#*#* there is an audio menu
there you can change the headset settings too like NR noise reducion.
i did not test and changed the settings but when i had the samsung omnia2 last year
i had some problems with my headset and fix it in in the sevice menu.
when you gonne do some tests write down the orginal settings before you try.
hope this will help some of you..... and post the results
im sure its the jack, cos the galaxy s has a 4pole trrs at left/right/mic/ground
iphone compatible headset have a 4pole trrs at left/right/ground/mic
thats why pressing the mic button clears up the sound as it closes the circuit
so it a matter of finding an adaptor that switches the mic and ground terminals
I have a tf10vi and im trying to diy one
will post the results
Just saw the post and thought I would check mine again, not that I noticed anything....anyway tried few songs and different types and all are sounding amazing, I use Sure 530 so music needs to be no lower than 256 to get the best out of the phones, most of my music tracks are 320bit.
Does anyone else have this issue where sometimes when you plug in headphones the sound still comes through the speaker? I have the headphones plugged all the way in. I usually have to restart the phone to get it to work properly.
[Edit]: When this happens the sound comes out from the speaker as well as through the headphones.
Mine is more of when I bump the headphone jack it either plays through the speaker or pauses the song. It seems very sensitive
My first Vibrant had a faulty headphone jack, that would short out with even the slightest touch. You guys might be in the same boat.
Overall, yes, I would agree that the headphone jack is 'cheap'. It seems as if it could be easily broken, and having one arrive DOA is not a great sign.
If you're still able to, I'd take your phones in for a swap. You're not going crazy.
Same issue here. It's especially an issue when you're sitting in your quite cube at work about to watch The Bed Intruder video on YouTube and it comes blaring out of the speaker when you thought is was going to come out of your headphones.
I think the third connection point for the video causes the problem since the device has 3 contacts instead of just left and right audio like most devices.
Sent from my SGH-T959 using XDA App
Guys,
Another day, another observation. When you plug in the headphones, do you guys hear a hissing/static/white noise for a couple of seconds initially. I am able to reproduce this every time I plug in my headphones (tried three different sets). I am not too bothered by it because the noise dies after 2-3 seconds. I also witness the same behavior when I pause a song.
I guess I am raising the topic here because am not sure if this is common across all WP7 devices (thereby making this a WP7 issue), if it is only my phone, or if it is common across all Venue Pros.
Thanks for any input.
ZappiestOyster said:
Guys,
Another day, another observation. When you plug in the headphones, do you guys hear a hissing/static/white noise for a couple of seconds initially. I am able to reproduce this every time I plug in my headphones (tried three different sets). I am not too bothered by it because the noise dies after 2-3 seconds. I also witness the same behavior when I pause a song.
I guess I am raising the topic here because am not sure if this is common across all WP7 devices (thereby making this a WP7 issue), if it is only my phone, or if it is common across all Venue Pros.
Thanks for any input.
Click to expand...
Click to collapse
I get the same noise, but mine is constant. Whenever a sound plays, the white noise/hissing in the background comes up and continues for 5-10 seconds after the sound is played and then goes out. Then when another sound happens, it does it again.
It almost makes using headphones unbearable.
I've tried multiple sets of headphones too, it does it on them all.
I think it may have something to do with the curved top of the phone and the fact that the plug doesn't go all the way into the device.
Anybody else have a similar experience?
jfellows said:
I think it may have something to do with the curved top of the phone and the fact that the plug doesn't go all the way into the device.
Anybody else have a similar experience?
Click to expand...
Click to collapse
I don't think it's that - if the curved surface was the culprit, the sound wouldn't vanish after a few seconds. It almost seems like a software issue.
Thanks for confirming the behavior!
I only hear the hissing sound for a few seconds after plugging it in to the jack...
Hearing a hissing on most smartphones is pretty common, in my experience. The better quality earphones you use the more you will notice it. The Nexus One did, the Venue Pro does, my N95 did a bit.
People I've called with the built in headphones/mic say the noise levels are so extreme they are unusable. Hopefully the free Bluetooth headset we're all getting will fix that issue...
Hello!
This is normal when companies use cheap DACs and amps for sound replication. The DAC turns on when you play sounds, and turns off when there's a period of no sound. If it's a cheap system, there's a noticeable base sound/noise that is added to your signal.
When you have music playing, that, of course, is drowned out by the music. Thus, you won't hear it unless you have really soft music, say, a few bars rest in your classical album or something.
The problem also is more noticeable with low impedance earphones (IEMs, for example).
A possible, easy way to fix this is to use an inline resistor/impedance cable on your headphones, since typically this noise does not vary with volume (in my experience). Then, you bump up the volume on your device... if it's powerful enough to do it. Otherwise, you'll have to inline resistor, a clean-sounding portable amplifier (powered by additional), and then your headphones. It gets pretty bulky...
Alternatively! Separate your music player and your phone. Unfortunately, the DVP has such a nice Zune interface. And still, with cheap music players you can hear the hiss if you're careful. I can hear this on iPods with my earphones still...
Sorry to hear about this! I was hoping that the sound quality would be decent. I might try to get an HD7 instead now...
Cheers!
linj said:
Sorry to hear about this! I was hoping that the sound quality would be decent. I might try to get an HD7 instead now...
Cheers!
Click to expand...
Click to collapse
Just to let you know, the HD7 does not have the hissing/static that the DVP does. I've tried the HD7, Samsung Focus and DVP and HD7 had the best sound quality in my opinion. The Focus sounds muffled compared to both HD7 and DVP.
I've got the same hissing noise on mine, but I think it's an issue with a crappy DAC as it's only there when there is sound. I was hoping to replace my Zune HD but there's no way that's gonna happen with this noise - it's AWFUL!
I'm really thinking about moving to a Samsung Focus. I loved this phone when I first got it, but over time I just uncover more and more I don't like.
Arcarsenal said:
Hearing a hissing on most smartphones is pretty common, in my experience. The better quality earphones you use the more you will notice it. The Nexus One did, the Venue Pro does, my N95 did a bit.
Click to expand...
Click to collapse
Very true. Almost every phone I've used has this. It's more noticeable on some phones than others but it's nothing unique to the DVP.
Bringing this back to the top, I've observed something on my new model, though I could have sworn the one I sent back for a refund did not have this problem...and it only occurs with earbuds, and not ear phones (I have a big pair of medium to high quality full-size Creative earphones, the buzzing is not audible at all with them.
Since this phone seems reasonably crash-free, I'm reluctant to press Dell for a replacement, especially if, viola, all the DVPs have this problem. Mine seems particularly loud, but that may be a combination of the Zune Premium earbuds I'm using and other factors. As others said, it vanishes briefly if you pause a song (like the sound output is switching off to save electricity or whatever) but resumes immediately. I might be better off just going through various earphones and finding a brand that's of at least the quality of my current earbuds but minimizes the effect.
EDIT: Additionally, lowering the volume simply makes it much more noticeable.
Hi, does someone have the same experience when connecting a headset to the TF?
I have to adjust the plug very precisely, since it can be pushed further into the device. Otherwise I loose left or right channel.
Is it less than 3.5mm? Or is some of where the wire means the plug (usually chunk of plastic) cut off?
no, it's an almost brand new inear headset which came with my Xperia Neo phone. I assumed the problem being caused by a sloppy assembled connector. If it works fine for everybody else, then it must be an individual defect with my TF
yeah i have a cheap pair of sony headphones and they work fine. just the volume isnt the best....but i know that is a tf issue not a headphone issue.
Yes, volume is a horror. I expected better. Haven't tried volume+ yet, works fine on my android phone.
To be honest, I wouldn't necessarily attribute the volume to the TF101. I have a decent pair of headphones and the volume works fine. Also, I've never noticed anything about the plug being finnicky.
I wasn't complaining about the sound but about the max. volume level. It seems to be a little low on my device. It may comply to some EU laws - I assume.
Anyway since nobody else has issues with the headset connector, I have to check with my dealer.
i'm having a similar issue but not exactly the same.
i used to have a problem with the 3.5" jack only when i plugged it to my surround system- logitech x530. i supposed it was because the signal is being amplified. so when i touched the connection or rotated it at his place it made a lot of loud static noise. i've tried changing cables but the same.
so i've got the lab to replace my transformer's mother board or so, and it is still happening. in fact i've noticed a new problem, this time with just a simple earphones.
when i push the plug a little bit harder into the jack, the sound becomes a bit louder.
wierd stuff... and of course in general the max volume kind of sucks.
I've noticed a similar issue with several of my plug-in phones.... Some work great whilst others either have no sound or mono only.
To me it appears the connector on the TF is simply too picky.
I have a pair of meelectronic A151 armature iems as well as Vsonic GR07, and while i like my music loud, clear, and with a lot of instrument seperation, maxing volume is definitely not needed.
Quick fix would be to flash a Rom/kernel compatible with Supercurio's Voodoo control and install Voodoo. It will be louder and sound clearer.
http://forum.xda-developers.com/showthread.php?p=14914293
Long term fix would be to buy a better pair of iems/headphones. Armatures like the A151s I mentioned above for clarity, a good dynamic driver like Meelec CC51, Sunrise X-cape, if you're a basshead, or VSonic's GR07 if you want a nice combination of both.
I'm quite a bit of an audiophile and while it surely isn't THE best DAC out there, the Wolfson WM8903 is very very good.
Also, depending on what phones you're using, you may just need an external amp, especially if their impedance is rather high.
Edit: I realize I went more into the sound aspect, as it was also being discussed above, but all my iems fit my TF snug just like all my other devices.
Sent from my HTC Eva 4G using Tapatalk
If anything mine is too tight a fit, but works perfectly with any headset I've tried.