Can anyone tell me if there's a way to flash a new radio with android already flashed.
i would like to know that too >.<
probably via the bootloader? or do we really have to flashback to winmo first Oo
1. Power off your device.
2. Hold Volume Down key and power on the device till u get the tricolour screen.
3. Flash your Preferred Radio Rom
Where can you download these radio roms? And once you flash those roms do you still keep your Android rom that you have installed before you flash the radio rom?
benmeilink said:
Where can you download these radio roms? And once you flash those roms do you still keep your Android rom that you have installed before you flash the radio rom?
Click to expand...
Click to collapse
you will still have your android without any changes
Once you are in the tricolour screen you just flash with customRUU? Because customRUU wont find any information concerning the radio that is already installed..?
benmeilink said:
Once you are in the tricolour screen you just flash with customRUU? Because customRUU wont find any information concerning the radio that is already installed..?
Click to expand...
Click to collapse
two days ago i flashed the most recent radio on my android hd2.
went without problems, just like max_ray said, boot into bootloader/tricolourscreen and then flash with RUU.
just do it, it works ^^
Related
Hello,
I bought HD2 just yesterday, probably as every member of xda, i tried flashing it. No problem, i tried several ROMs and as far as i remember - after flash it got stuck at white bootscreen with green HTC (i found several threads dealing with this problem, but most of the people had written there ROM, RADIO, .. in the left corner - I dont have this written) So I tried to flash the phone from the SD with stock rom, nothing has changed, I tried taking out the sd & sim card. I tried hardresetting device few times and I got no more ideas.
Do you have any ideas?
Thanks in advance!!!
Filip
Edit 1: In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Edit 2: For now I have HSPL in the phone.
sounds like a missmatched rom and radio. once they are both flashed correctly it will boot. (example, a rom based on 2.10 rom will require a radio of around 2.06 or better to boot.)
edit - just seen you flashed with a stock rom from sd card, can you boot to bootloader? (press and hold vol down, tap power on)
dont worry about
In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Click to expand...
Click to collapse
for now
Felipe404 said:
Hello,
I bought HD2 just yesterday, probably as every member of xda, i tried flashing it. No problem, i tried several ROMs and as far as i remember - after flash it got stuck at white bootscreen with green HTC ...
Edit 1: In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Click to expand...
Click to collapse
I had exactly the same problem several days ago. After exchanging several ROMs, I got stuck at very first white screen with a green banner, but before it even showed the ROM and radio versions on it. And it happen after the ROM flush finished successfully. I also tried to hard reset it a couple of times.
But after that I used a gold card with 1.61 WWE ROM on it that I still have from the time when the HSPL wasn't developed yet.
During the flash from the gold card it waited at first and shown a some kind of error or warning grey exclamation sigh in a triangle, but just for a split second. After that it returned to continue flushing. I think it took twice as long as it should be, but as it finished, I was able to boot, hard reset and re-flash to the stock ROM 1.66 WWE, the usual way through the USB cable.
samsamuel: I can get with no problem to bootloader, could you send me exact link of the rom and radio that work together? And how come, that everytime I connect the phone to charger, it starts up?
mikiort: I havent ever used goldcard, havent ever heard of it better to say..
thanks for your help, guys, really appreciate it!!!
Since you have HSPL stil on your phone
(SPL 1.42.HSPL and not 1.42.0000) you are happy. Flash a stock rom from USB, lets say a 1.66 wwe rom, and if it still wont boot, go to teh radio roms thread, pick a low radio, (the 1.61 for instance) flash that, and you should have a working phone.
yeah, right now im flashin 1.66 WWE but it stopped and 99%... waaa im gettin nervous ok i will try and let you know
Ok, flashed 1.66 WWE but nothing has changed, im about to flash radio.
Flashed Radio 1.61 "Leo_RADIO_15.30.50.07U_2.06.51.07.nbh.7z" and still nothing... Oh!!! do you have any other ideas? Or should i again try to flash from SD official ROM?
Felipe404 said:
Flashed Radio 1.61 "Leo_RADIO_15.30.50.07U_2.06.51.07.nbh.7z" and still nothing... Oh!!! do you have any other ideas? Or should i again try to flash from SD official ROM?
Click to expand...
Click to collapse
hmm, sorry to hear that. i'd maybe consider flashing stock from sd card, but you need to be sure you have teh correct stock rom for your phone provider and region.
Be warned, this will remove HSPL, if you do not have the correct stock rom, it wont work.
Yea, i did that once already with 1.48 WWE Eastern Europe, it worked (it didnt show the triangle sign) but it didnt help, now im trying to flash 1.43 but im not expecting anything good
Done, nothing helps ... Now i have SPL 1.42000 so i can get the HSPL but as far as it doesnt help i dont know what to do...
Felipe404 said:
Done, nothing helps ... Now i have SPL 1.42000 so i can get the HSPL but as far as it doesnt help i dont know what to do...
Click to expand...
Click to collapse
Ok, if you have 1.42.0000 you need to redo the hspl flash. Once the spl is 1.42.hspl you can then flash to the rom of your choice. Which rom were you trying?
Many of the new roms require you to flash to a new radio at least 2.06 and most recently to 2.08 PRIOR to flashing the rom and if you don't the rom does not boot up and gets stuck on the white HTC screen.
really noob question, but anyways... do you firstly flash the rom and than the radio?
and to those ROMs.. i tried duffys, energy and one more i cant remember right now.. Im trying to HSPL and than flash from Vista computer, not XP...
Felipe404 said:
really noob question, but anyways... do you firstly flash the rom and than the radio?
and to those ROMs.. i tried duffys, energy and one more i cant remember right now.. Im trying to HSPL and than flash from Vista computer, not XP...
Click to expand...
Click to collapse
For these newer roms you need to flash the radio first and then the rom, otherwise the rom doesn't boot up and gets stuck on the white screen.
If you are flashing a newer ROM based on the new TMOUS ROM I would flash the 2.08.50.08.03 Radio, then the ROM. Make sure you have HSPL 1.42 first.
Ok, I do have SPL-1.42.HSPL CotullaHSPL there... now if possible tell me the "for sure" working combination... Btw, i remember how did it happen, i flashed dutty's rom and wifi was not working (option in communications couldnt be turned on/off was grey) and so i tried to flash there other rom.. and it got into problems..
Felipe404 said:
(option in communications couldnt be turned on/off was grey)
Click to expand...
Click to collapse
thats usually means you have the phone on usb connected to the computer.
Felipe404 said:
Ok, I do have SPL-1.42.HSPL CotullaHSPL there... now if possible tell me the "for sure" working combination... Btw, i remember how did it happen, i flashed dutty's rom and wifi was not working (option in communications couldnt be turned on/off was grey) and so i tried to flash there other rom.. and it got into problems..
Click to expand...
Click to collapse
I'm currently using the latest NRG rom (link in my signature) with the 2.08.50.08 radio and that works. Just as I said, flash the radio first and then the rom. The Dutty rom should also work the same way though so the choice is still yours.
OK so here i come, i flashed there firstly the radio Leo_RADIO_15.34.50.07U_2.08.50.05, then Dutty's ROM Duttys Leo HG V1 5.2.21892 but nothing has changed.. I think the device is ready to be sent to HTC, what do you guys think?
Felipe404 said:
OK so here i come, i flashed there firstly the radio Leo_RADIO_15.34.50.07U_2.08.50.05, then Dutty's ROM Duttys Leo HG V1 5.2.21892 but nothing has changed.. I think the device is ready to be sent to HTC, what do you guys think?
Click to expand...
Click to collapse
What did you do to flash the radio? Please explain how you did it.
Anyone need a building block?
My HD2 is a total brick. HSPled and flashed rom (Romeos by Monx). Rom installed properly but the device cant start. Even after hard reset the thing is stuck at hTC white screen! Turns out that I should have flashed compatible radio first; But I am learning this after the fact. Nobody told me so.
Now please tell me what to do before i do something stupid. How do I install a compatible radio on a comatose HD2. Can I flash radio from the bootloader? Do I have to downgrade the rom first? Or must I install from the Sd card.
Guys I think a massive depression is setting in.
boot to boot loader, flash the radio using customruu just like you did the rom. job done.
PlayStation said:
Anyone need a building block?
My HD2 is a total brick. HSPled and flashed rom (Romeos by Monx). Rom installed properly but the device cant start. Even after hard reset the thing is stuck at hTC white screen! Turns out that I should have flashed compatible radio first; But I am learning this after the fact. Nobody told me so.
Now please tell me what to do before i do something stupid. How do I install a compatible radio on a comatose HD2. Can I flash radio from the bootloader? Do I have to downgrade the rom first? Or must I install from the Sd card.
Guys I think a massive depression is setting in.
Click to expand...
Click to collapse
relax, nothing irreparable
go to bootloader mode - connect to usb - flash proper radio as you flashed rom - job done
samsamuel said:
boot to boot loader, flask the radio using customruu just like you did the rom. job done.
Click to expand...
Click to collapse
+1 on this.
Don't panic. Experienced the same behaviour with same ROM (and proper radio).
Enter the boot loader and reflash via USB or microSD (both ways worked for me).
l.o.l. yeah, if hspl on and you used customruu it's all fine.
Even if not, you can flash stock always with goldcard.
surprised that it did not say on the first page what radiorom was recommended/necessary. In fact most 2.xx based roms state the need for a 2.07 or 2.08 radio.
1) reset the phone
2) hold on to the volumn down button till the 3-coloured screen (that's bootloader)
3) flash the radio ROM via USB
4) reset
Solved
Problem solved!
Ha ha apparently the panic was as a result of a false alarm. I flashed a compatible radio from the bootloader and all is well now.
Thank you all for the tips. I just needed a true and tested method to resolve the matter. And by the way Romeos rom by Monx is the bomb - better than Windows Phone 13 Series!!!!
http://forum.xda-developers.com/showthread.php?t=631662
i installed MAGLDR111 on my hd2 WinMo to install the Nand Andriod rom, but after installin the MAGLDR111 while rebooting it gave the white screen with the HTC logo and froze,and now it is dead even icant do a hard reset nether i can't turn it of....plz help me i don't know what to do.DID i lost my divice
Ok, take off the battery
Put it back in while your holding down the down volume button
Hspl will come
Plug your hd2 to the computer and flash a stock rom
I hope this helped
Sent from my HTC HD2 using XDA App
yz.hd said:
Ok, take off the battery
Put it back in while your holding down the down volume button
Hspl will come
Plug your hd2 to the computer and flash a stock rom
I hope this helped
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
thx it worked but after reinstalling the stock rom it comes again to what happend first.
You must have missed something.
1. Hold vol down to enter HSPL during boot.
2. Either Task29 or directly flash a stock rom to completely revert to original state.
3. If you using custom rom and task 29, make sure you also flash the radio.
In order for the MAGLDR to work, you MUST flash radio that enables 576MB ram. I.e.: radio with *.50.* in its version name. If your stock rom comes with *.51.* radio, you need to change the radio.
Go here (http://forum.xda-developers.com/showthread.php?t=611787) and pick a compatible radio and flash it. Then finally flash MAGLDR. It should work then.
Can anyone tell me where to get a stock rom?
I tried the HTC website, but apparently my serial number is wrong (I dunno why). My provider (vodafone) doesn't have anything either...
pietme said:
Can anyone tell me where to get a stock rom?
I tried the HTC website, but apparently my serial number is wrong (I dunno why). My provider (vodafone) doesn't have anything either...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=623283
you deserve a medal
Thanks
Just a quick question...I want to install HSPL 2.08..which rom do I need?
tidus18 said:
You must have missed something.
1. Hold vol down to enter HSPL during boot.
2. Either Task29 or directly flash a stock rom to completely revert to original state.
3. If you using custom rom and task 29, make sure you also flash the radio.
In order for the MAGLDR to work, you MUST flash radio that enables 576MB ram. I.e.: radio with *.50.* in its version name. If your stock rom comes with *.51.* radio, you need to change the radio.
Go here (http://forum.xda-developers.com/showthread.php?t=611787) and pick a compatible radio and flash it. Then finally flash MAGLDR. It should work then.
Click to expand...
Click to collapse
THX,at last I installed the NAND ANDRIOD and it worked fine ,but the problem is it can't read the SD CARD & the WIFI doesn't work...IS THERE A FIX FOR THAT...PLZ URGENT..
at004 said:
THX,at last I installed the NAND ANDRIOD and it worked fine ,but the problem is it can't read the SD CARD & the WIFI doesn't work...IS THERE A FIX FOR THAT...PLZ URGENT..
Click to expand...
Click to collapse
You need to provide more details. Which build are you using? Did you change the kernel, if so, did u copy the modules as well? Also, have you tried formatting your SD card using the panasonic SDHC card formatter? (It may seem trivial to format, but broken file system will prevent android from mounting your sdcard)
I have sucessfully installed MAGLDR 1.10 and flashed CyanogenMod7_v.2.6_NAND_A2SD to my HTC HD2. The phone works 100% Appz/ voice calls/ messaging/ internet/ videos/ Nothing was wrong for about 1 week. Now my phone cannot make any Voice calls and I get terrible T-mobile signal where I usually get all bars Full. When I try to make voice calls it would connect to the other person I am trying to talk to but I cannot hear them and they cannot hear me. Then the phone gives me an error code. Something like Process.Kernal.Droid Not responding would you like to close? But Everything else works except voice calls.
Is there something I did wrong? How do I fix this? My brother told me I need to install a new radio. So does anyone know how to install a new radio?? How do I do it and where do i find one?
Flash a new rom, that rom is full of bugs, happen the same to me.
Sent from my HTC HD2 using XDA App
you shoud be posting this in the rom creators thread
pentiumtu said:
So does anyone know how to install a new radio?? How do I do it and where do i find one?
Click to expand...
Click to collapse
You can get radios over on the WM6.5 ROM development forum (or click the radio link in my signature ). Switch phone off, hold vol down and switch phone on - you will boot into bootloader mode. Connect to pc and when usb shows on phone screen flash the radio as you would flash a winmo rom.
ClydeB1 said:
You can get radios over on the WM6.5 ROM development forum (or click the radio link in my signature ). Switch phone off, hold vol down and switch phone on - you will boot into bootloader mode. Connect to pc and when usb shows on phone screen flash the radio as you would flash a winmo rom.
Click to expand...
Click to collapse
Can I do this after I have already flashed my NAND Android ROM? In other words, will flashing a new radio destroy an Android ROM? In other, other words, if I flash a new radio, will I have to re-install my NAND Android ROM? TIA!
-Trew said:
Can I do this after I have already flashed my NAND ROM? In other words, will flashing a new radio destroy a ROM? In other, other words, if I flash a new radio, will I have to re-install my NAND ROM? TIA!
Click to expand...
Click to collapse
No, it will have no impact on the NAND rom or magldr. Just go to bootloader, flash the rom and then the phone will reboot and boot back to your Android rom. Just make sure that you flash a radio with a 50 in the naming convention (not 51) and it must be at least 2.08.50.xx or higher.
Guys, am trying to downgrade my SPL from 3.03.0000 but I cannot manage. Am running a vodafone locked hd2 on windows, but cannot find anything for this... help am kind of new to this...
Thread moved to Q&A in Android HD2.
Hi This is what i did
Flash a Stock HTC ROM 1.66 (Since its HTC ROM it installs when u run CustomRUU
SPL will get downgraded automatically
Now Install HSPL3 (option to choose - HSPL 2.08)
Now u can get Magldr, NAND Android flashed
Please look at my signature link if you are looking to get a SD build for instructions.
Good luck
question, where do i get Stock HTC ROM 1.66 from? Ive been downloading roms but none seem to work. My phone gets stuck after the rainbow screen. i get the loading screen which says that might take ten minutes but nothing happens...
xlinu said:
question, where do i get Stock HTC ROM 1.66 from? Ive been downloading roms but none seem to work. My phone gets stuck after the rainbow screen. i get the loading screen which says that might take ten minutes but nothing happens...
Click to expand...
Click to collapse
Maybe your radio needs updating? That was my problem when I first starting flashing roms around. Do you have the most recent?
DOWNLOAD:
Task 29
radio: Leo_RADIO_2.15.50.14 (http://forum.xda-developers.com/showthread.php?t=611787)
HSPL3
MAGLARD 1.13
ANDROID NAND ROM
enter bootloader mode.. flash task 29.
enter bootloader mode.. flash hspl (2.08
enter bootloader mode. flash radio
enter bootload mode.. flash maglard.
wait for maglard to open. Click on usb flasher. Flash your rom. I hope this works
xlinu said:
question, where do i get Stock HTC ROM 1.66 from? Ive been downloading roms but none seem to work. My phone gets stuck after the rainbow screen. i get the loading screen which says that might take ten minutes but nothing happens...
Click to expand...
Click to collapse
You can't just download any 1.66 rom and hope it works. The roms are split according to regions and you need to find the correct one for your device. Go to HTC for your area and enter your s/n and you should then be able to download the correct rom for your phone.
I got this message when trying to download the software:
Sorry, this software download is not suitable for your device.
xlinu said:
I got this message when trying to download the software:
Sorry, this software download is not suitable for your device.
Click to expand...
Click to collapse
HardSPL your phone, this will allow you to put any ROM on your phone.
Go to the windows 6.5 developement section of XDA, there you will find S/Numbers that you can enter in the HTC web site that will allow you to dowload a stock ROM for your part of the world.
Energy ROMs are fast and stable.
Read the NOOB threds at the start of all sections they are full of help, links and walkthroughs
is it too much to ask for a direct link for the thread to hardspl the hd2? mine is not tmobile, but a vodafone malta locked leo... am kinda stuck...
xlinu said:
is it too much to ask for a direct link for the thread to hardspl the hd2? mine is not tmobile, but a vodafone malta locked leo... am kinda stuck...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
thanks a lot!!