Related
I just noticed that upgrading throuh reg hack on Kies makes the phone run smoother than the same firmware while upgrading on Odin.
I don't know if this has to do with using one file in Odin however just wanted to share.
Sent from my GT-I9000 using XDA App
Is it the same file or two different files .
Kies your official network firmware Odin presume you are using a stock non provider file .
jje
Is JPY officially available on Kies?
sonci said:
I just noticed that upgrading throuh reg hack on Kies makes the phone run smoother than the same firmware while upgrading on Odin.
I don't know if this has to do with using one file in Odin however just wanted to share.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
How did you determine this? Might just be a placebo effect or related to something else you did / didn't do (e.g. factory reset / cache wipe).
ragin said:
Is JPY officially available on Kies?
Click to expand...
Click to collapse
Yes. I flashed to it last night. I downgraded via odin back to 2.1. Downloaded kies 2.0 and it came up with JPY firmware. So far so good, GPS is meh, didnt use it enough today though. Ive never had GPS issues previously, through either official 2.1 roms or non official 2.2 roms. Ill test more 2 moro
This is pure bs as usual. When u install a new f/w benchmarks always run slightly faster till u get memory filled up with installed programs.
Sent from my GT-I9000 using Tapatalk
I don't care about benchmarks. I was speaking of generally using the phone.
The phone is smoother, there is no more lag. There was always lag before even with no programs installed.
However it can be placebo,
I also noticed that after flashing some kernel (for going back to 2e recovery) immediately reappears the lag
The stock 2.2.1 is also smoother to me than Darky rom, however they equal after applying lagfix on Darky.
lgkahn said:
This is pure bs as usual. When u install a new f/w benchmarks always run slightly faster till u get memory filled up with installed programs.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Hello
i just updated my galaxy s to the leaked 2.3.3 build from a danish 2.2.1 build i tryed reflashing it since i had problems with no data connection and errors in phone part ( though it worked, just a bit buggy) the reflash and repartion that i choose to do since i had voodoo kennel on my phone before did not help either, so now my phone cant use data connection
anyone have any suggestions? maybe it is a common error? i tryed googling and looking a bit but did not see anything.
I really appreciate the help, another thing i would love would be a 2.3.3 build with danish keyboard/speech in it.
Are you saying that you flashed to a phone that was lagfixed .
If so its broke your phone Undo lagfix before flash is rule one .
You will need to flash stock rom using Odin to get a working phone .
jje
Okay but i flashed the version that was out in the forum with Odin, what Rom should i flash to get back to a state where i can flash 2.3.3 with Odin again? and will i need to re partion, i kinda thought that would take care of the laggfix?
I'm not sure what your problem is. Just take the files from the JVK Rom (PDA, Modem, CSC) add a pit file (512.pit or what you want) and select repartition and click start. Don't need to disable lagfix if you do it that way.
Sent from my GT-I9000 using XDA App
Hmm okay the thing is i already did exactly that and still no data connection :S
Maybe i need to flash a kennel without laggfix?
I have now flashed samsung stock kennel for 3.3.3 , i have reflashed 2.2.1 the version i get from my kies in Denmark and everything works in 2.2.1, now i tryed reflashing 2.3.3 and i still got the same problem as before any help would be much appreciated
Sounds like you need to put in your telco specific APN to get data working.
Sent from my GT-I9000 using XDA App
Change the phone part and put the jv1 modem
darkstar2k77 said:
Sounds like you need to put in your telco specific APN to get data working.
+1
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
okay sounds like something that might work, where can i find this apn?
where do i find this file?
It's not a file, it's the name/details of a server on your provider's network. If you didn't back up your original firmware, you'll probably have to call your network or check their website.
Word to the wise - reposting the same question after 7 minutes won't win you too many friends
Danish 2.3.3 keyboard - best to wait until the Nordic firmware is released/leaked.
Thanks the VPN from my network provider solved it!
btw i did not repost any question it was not the same question and i only posted course i was still in doubt.
again thank you all, properly never would have throught of VPN Settings by myself
No problem, glad you sorted it out.
Hi guys. I saw on samfirmware that stock ROM CSC: I9000XENJV4 is available for download. I'm guessing this is Netherlands official GB 2.3.3 stock rom. Unfortunately if I open Kies to update my phone it says that I'm using the latest firmware (2.2.1 CSC = I9000XENJS3; I9000XWJS5).
Has anyone managed to update to GB directly using Kies to this version?
Thank you in advance for your answers.
I think I9000XENJV4 is only available on samfirmware at the moment. I'm also on 2.2.x and kies doesn't show updates.
Samfirmware was wrong, see his tweet some moments later:
@SamFirmware Update KIES for Netherlands not online yet. Galaxy S.
Samfirmware shows firmware-files - i just flashed my SGS with the xen-firmware and it works like a charm... So the update may not be available through KIES but the firmware files are available from SamFirmware.com
I do not understand this Samsung policy..why Nordic countries got it months before....testing purposes or what??
Sent from my GT-I9000 using XDA App
I guess so. I used the Nordic version a long time
Thank you very much for your answers. I thought it is something wrong with my phone or kies since I cannot find for that specific CSC. In this case I'll be waiting a little bit more. Anyhow, it's weird that XEN firmware isn't out for gingerbread since NEE is out for more than one month.
Now available by kies I9000XWJVH/I9000XENJV4/I9000XXJVO/I9000XWJVH
lownoise said:
Now available by kies I9000XWJVH/I9000XENJV4/I9000XXJVO/I9000XWJVH
Click to expand...
Click to collapse
indeed, got that too through kies...at last!
Me too. It was finally available. Now i'm checking the forum on root
Sent from my GT-I9000 using XDA Premium App
Any news on the best root method?
Sent from my GT-I9000 using XDA App
Use the Voodoo kernel to root
Sent from my GT-I9000 using XDA Premium App
Is there somthing more simple like a one click, i dont want to use odin.
Sent from my GT-I9000 using XDA App
Is there any way to know what are T9 and swype languages in this rom without having to flash it?
Or any other rom for that matter?
Startup sound is not smooth on my phone but interrupted. Same with voice announcements in the Osmand navigation program. MP3s play fine though.
Had some problems with widgets. Songbird needed readding the widget after program restart.
Jorte calandar had its widget not showing. After updating some fight to get it to work with the Google calendar, but that was not 2.3.3/JVH's fault.
I'm on GT-9000 / 2.3.3 stock /I9000XXJVO/GINGERBREAD.XWJVH/ stock kernel at the moment still as well.
Used the last voodoo before on Froyo but I'm not too keen on flashing anything right now right away to root again. I'd love to get voodoo on it again (mainly because of the audio features and obviously the lagfix) however the latest voodoo kernel for gingerbread on JVH stll seems to be based on older sources then the one samsung just released from what i've read.
As soon as there is a stable Voodoo (without the word "hack" in it) for JVH, i'm flashing
At least I have 3 button combo's now working after updating to the 2.3.3 XWJVH XEN. They didn't work for me before!
jutezak said:
At least I have 3 button combo's now working after updating to the 2.3.3 XWJVH XEN. They didn't work for me before!
Click to expand...
Click to collapse
Hang on that is interesting!!
Mine worked before and still do, but a friend of mine has one that didn't have the 3 button combo so im interested to see what'll happen there.
Dit yours never work or did they stop working after a custom rom?
3 button combo indeed start working after this update
I just checked mine, after reading the thread and yes I can confirm mine never worked before but after this update to 2.3.3,it started working.
That's nice.
GreenSGS said:
I just checked mine, after reading the thread and yes I can confirm mine never worked before but after this update to 2.3.3,it started working.
That's nice.
Click to expand...
Click to collapse
That's because the gingerbread update contains the SBL (Secondary Boot Loader).
The sbl is responsible for the 3-button combo.
Sent from my GT-I9000 running Gingerbread using Tapatalk
Or is it me?!
Very fast intraOS movement. Browser also seems plain faster.
System and call sound better also.
rockky said:
Or is it me?!
Very fast intraOS movement. Browser also seems plain faster.
System and call sound better also.
Click to expand...
Click to collapse
I've got the Sheep ROM.
How would I go about getting and installing this? I can't do OTA upgrades because they don't come because I have a Custom ROM.
I can't do Kies, because it says it can't do SW updates.
Are you using a Custom ROM?
I wiped all (which you must do if coming from an odex'd rom) and installed Cassies V4 Rom with the new build and modem....then Abyssnote kernel?
Even without kernel...you can tell right off the build is a big stepup.
Don't think I answered your?
There's a thread in Dev section that has the link to the files
http://www.multiupload.com/8P1M2BGMXY
You can put on your phone and flash from recovery.
QUOTE=les_garten;20433640]I've got the Sheep ROM.
How would I go about getting and installing this? I can do OTA upgrades because they don't come because I have a Custom ROM.
I can do Kies, because it says it can't do SW updates.
Are you using a Custom ROM?[/QUOTE]
This soft is an improvement. It's far from satisfactory( android is still choppy as hell comparing to other OSes) but it's a step in the right direction.
I can report a better Wi-Fi range - I'm getting signal in some places in my house where I couldn't before.
No choppiness here...thing flies.
Does stock browser power saving levels works (any change in screen brightness)?
For me it worked well in KKA but not in KL3 .
Please test this for me.
Thank you.
ADW is still a bit sluggish, I'm using Cassie's KL3
PickleHead said:
ADW is still a bit sluggish, I'm using Cassie's KL3
Click to expand...
Click to collapse
If you change the cache to low quality it won't lag at all.
Sent from my GT-N7000 using XDA App
KLx series has problem with STK. I always get FC with my STK film. But I do not have any problem with KK1.
Confirmed. KL3 feels a bit faster.
This update has made a massive difference for me. I'm using ADW and widgetlocker and the phone now feels properly connected to my inputs on the screen, lag is pretty much gone. Much happier with the feel of the phone now.
I flashed through CWM and installed CFroot kernel for KL3 at the same time.
This things screams compared to KKA. I lost pinch to zoom in my Gmail Client. Anybody have any ideas about that?
Is this an update that we will get OTA? And what region are you guys in?
Sent from my GT-N7000 using xda premium
LordManhattan said:
Is this an update that we will get OTA? And what region are you guys in?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi LordManhattan,
When I tried OTA, it says that my software is up to date. But when I connected my Note with Kies, it told me that there is a KL3 update. (From the Philippines but currently located in India).
For the record, I havent updated the software yet. Will do so by the weekend.
Updating via Kies
Question:
How do you update GNote via Kies? Is it through Kies Air? If it is through Kies Air, how? I do not see any Check Update button.
Or do I need to connect my Note to my computer via USB?
Thanks!
allansy said:
Question:
How do you update GNote via Kies? Is it through Kies Air? If it is through Kies Air, how? I do not see any Check Update button.
Or do I need to connect my Note to my computer via USB?
Thanks!
Click to expand...
Click to collapse
Ensure USB debugger is off, connect phone via USB. Launch kies. Wait for pop up. Check if you have the latest Kies if needed.
Damnit. Running Ubuntu, so no Kies for me. Anything else i can do?
Sent from my GT-N7000 using xda premium
i cannot see the KL3 update over OTA , neither with Kies for windows , i bought my galaxy note in switzerland , KKA firmware.
anyone else in europe got the KL3 update ?
no kl3 italy
same problem here no OTA and no kies.. been checking constantly.. lool...
i think its only india that have the update...
so i guess if we want it we just have to flash.....a rom from here
Seriously every Note user should flash Stock or a custom rom based on this KL7
Can get stock here: http://forum.xda-developers.com/showthread.php?t=1413120
I like many others had many issues with Lag and now my note litterally flies...!
And I haven't even put AbyssNote on it yet!!!!!
Also this KL7 fixes a bluetooth keyboard Issue I had with every previous rom. I had to mix and mash bluetooth drivers from my gtab and a sgs2 to get my bluetooth keyboard working but all resolved with KL7!!!
Am quite chuffed!
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
ManicDVLN said:
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
Click to expand...
Click to collapse
I would also appreciate knowing this!
I just flash kl7...avesome..smooth like hell..fast..some minore changes but much faster then kl3.
Sent from my GT-N7000 using xda premium
Agreed, KL7 is amazing.
No more lag anywhere, it's so fluid in everything it does now.
Even in the settings menu where it would be kinda jerky when scrolling in KL3, it's butter smooth now for example in KL7.
What's different about it to Kka, I'm on that and its smooth as already and it's android 2.3.6, isn't kl7 jut a regional version of kka?
kl7 is the latest firmware version
ManicDVLN said:
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
Click to expand...
Click to collapse
Basically use Odin 1.85 or mobile Odin to update.
Then apply CWM and root using the script in the CFRoot link that is also linked in the KL7 Thread.
Check the KL7 Thread for more information.
Only thing that still lags for me is phone.
Sent from my GT-N7000 using xda premium
Also the hueing in apps such as Xda app has also vanished.
“Phone? Tablet? Feel Free, It’s Galaxy Note”
thank you for your advise i try it and it was the best.
This firmware is available officially via Kies for me (German Note)
What is 2.3.6 KL7? official rom? need root to do this? Couldn't we wait for 2.3.6 update from Samsung itself?
tytung2020 said:
What is 2.3.6 KL7? official rom? need root to do this? Couldn't we wait for 2.3.6 update from Samsung itself?
Click to expand...
Click to collapse
It is a German official Samsung version can be found OTA (Over The Air) or via kies if your phone has/is flashed with a DBT code of CSC.
If you flash this after that you will wait for German updates only because region code will be DBT (debitel Germany) unlocked note for Germany.
Sent from my GT-N7000 using XDA App
Change CSC then do OTA
ManicDVLN said:
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
Click to expand...
Click to collapse
The last 2 updates were first rolled out for phones with the DBT CSC.
The latest KL7 firmware is available for phones with the German Debitel CSC.
To avail yourself of the update without using Kies, you can do an OTA(over the air) update.
Since the update is currently only available for phones set to the DBT CSC, if you change your phones CSC using this method here, you will then be able to update OTA by going to Settings > About Phone > Software update > Update. (Not all Note phones can have their CSC changed with this method)
Changing the CSC will reset your phone to factory settings.
tytung2020 said:
What is 2.3.6 KL7? official rom? need root to do this? Couldn't we wait for 2.3.6 update from Samsung itself?
Click to expand...
Click to collapse
It's getting very difficult to keep waiting for this to be rolled out! I have KJ4 and have been waiting for what seems forever. Why doesn't Samsung just do this for all devices at once?
I am currently using a hongkong offical rom.
It always lag for 2 seconds when I click the power button to activate the phone from standby mode. Does kl7 fix this issue？
Thanks!
I like everything, but Browser is mistakable zoom in.
But rom is HOT
kyleji said:
I am currently using a hongkong offical rom.
It always lag for 2 seconds when I click the power button to activate the phone from standby mode. Does kl7 fix this issue？
Thanks!
Click to expand...
Click to collapse
Yes. Yes it does.
Sent from my Samsung Galaxy Note using XDA Premium app.
Mine is still kind of laggy with Go launcher, tw is a no go for me, lacks to many features. I've tested with ADW and it's buttery smooth but compared to golauncher adwd lacks features as well.
(I'm a fan of go-widgets)