Database Users

Use the right odin for your phone

Seen lots of posts by members having problems after flashing using the wrong version of odin for their phone.
Please beware odin versions are device specific and using the wrong software to flash your phone is dangerous. Make sure you get the right one.
http://www.samfirmware.com/WEBPROTECT-programandroid.htm
Sent from my GTI9000 using XDA App, gingerbread 2.3.3 jvh rooted, ADW launcher + gingerbread theme

i always use odin 1.3. so far so good.

i have always used odin 1.7 (not knowing i shouldnt)
but never had any issues so far.... i prefer it over the other versions

if u are not using window 7 then should be no problem.

ic3joker said:
i always use odin 1.3. so far so good.
Click to expand...
Click to collapse
Same here, no problems so far. Win 7 (64)

I am going to suggest that a reading of the post gives not what the OP claims but a upgrade order for Odin versions . Samsung are hardly likely to give multiple versions of Odin to tech repair .
needs a tech repair guy to put us straight i use Odin 1.3 on SGS1 and SGS 2
jje

ic3joker said:
i always use odin 1.3. so far so good.
Click to expand...
Click to collapse
same, work as it should.

I have been using 1.8. Whew

I use 1.85 and no problems at all....odin versions are all the same....
Sent from my SGS with Simply 3.3 FINAL ROM

simone201 said:
I use 1.85 and no problems at all....odin versions are all the same....
Sent from my SGS with Simply 3.3 FINAL ROM
Click to expand...
Click to collapse
Me too, didn't know that it's device specific.

They are retrocompatible....the latest is compatible with all galaxy s series....
Sent from my SGS with Simply 3.3 FINAL ROM

[Q]Dutch XEN Official Gingerbread 2.3.3 stock rom

Hi guys. I saw on samfirmware that stock ROM CSC: I9000XENJV4 is available for download. I'm guessing this is Netherlands official GB 2.3.3 stock rom. Unfortunately if I open Kies to update my phone it says that I'm using the latest firmware (2.2.1 CSC = I9000XENJS3; I9000XWJS5).
Has anyone managed to update to GB directly using Kies to this version?
Thank you in advance for your answers.

I think I9000XENJV4 is only available on samfirmware at the moment. I'm also on 2.2.x and kies doesn't show updates.

Samfirmware was wrong, see his tweet some moments later:
@SamFirmware Update KIES for Netherlands not online yet. Galaxy S.

Samfirmware shows firmware-files - i just flashed my SGS with the xen-firmware and it works like a charm... So the update may not be available through KIES but the firmware files are available from SamFirmware.com

I do not understand this Samsung policy..why Nordic countries got it months before....testing purposes or what??
Sent from my GT-I9000 using XDA App

I guess so. I used the Nordic version a long time

Thank you very much for your answers. I thought it is something wrong with my phone or kies since I cannot find for that specific CSC. In this case I'll be waiting a little bit more. Anyhow, it's weird that XEN firmware isn't out for gingerbread since NEE is out for more than one month.

Now available by kies I9000XWJVH/I9000XENJV4/I9000XXJVO/I9000XWJVH

lownoise said:
Now available by kies I9000XWJVH/I9000XENJV4/I9000XXJVO/I9000XWJVH
Click to expand...
Click to collapse
indeed, got that too through kies...at last!

Me too. It was finally available. Now i'm checking the forum on root
Sent from my GT-I9000 using XDA Premium App

Any news on the best root method?
Sent from my GT-I9000 using XDA App

Use the Voodoo kernel to root
Sent from my GT-I9000 using XDA Premium App

Is there somthing more simple like a one click, i dont want to use odin.
Sent from my GT-I9000 using XDA App

Is there any way to know what are T9 and swype languages in this rom without having to flash it?
Or any other rom for that matter?

Startup sound is not smooth on my phone but interrupted. Same with voice announcements in the Osmand navigation program. MP3s play fine though.
Had some problems with widgets. Songbird needed readding the widget after program restart.
Jorte calandar had its widget not showing. After updating some fight to get it to work with the Google calendar, but that was not 2.3.3/JVH's fault.

I'm on GT-9000 / 2.3.3 stock /I9000XXJVO/GINGERBREAD.XWJVH/ stock kernel at the moment still as well.
Used the last voodoo before on Froyo but I'm not too keen on flashing anything right now right away to root again. I'd love to get voodoo on it again (mainly because of the audio features and obviously the lagfix) however the latest voodoo kernel for gingerbread on JVH stll seems to be based on older sources then the one samsung just released from what i've read.
As soon as there is a stable Voodoo (without the word "hack" in it) for JVH, i'm flashing

At least I have 3 button combo's now working after updating to the 2.3.3 XWJVH XEN. They didn't work for me before!

jutezak said:
At least I have 3 button combo's now working after updating to the 2.3.3 XWJVH XEN. They didn't work for me before!
Click to expand...
Click to collapse
Hang on that is interesting!!
Mine worked before and still do, but a friend of mine has one that didn't have the 3 button combo so im interested to see what'll happen there.
Dit yours never work or did they stop working after a custom rom?

3 button combo indeed start working after this update
I just checked mine, after reading the thread and yes I can confirm mine never worked before but after this update to 2.3.3,it started working.
That's nice.

GreenSGS said:
I just checked mine, after reading the thread and yes I can confirm mine never worked before but after this update to 2.3.3,it started working.
That's nice.
Click to expand...
Click to collapse
That's because the gingerbread update contains the SBL (Secondary Boot Loader).
The sbl is responsible for the 3-button combo.
Sent from my GT-I9000 running Gingerbread using Tapatalk

JVT (2.3.5 via KIES) What is new

What is new/different in this build? The only things I have noticed is the perpetual scrolling and blue end of page buffers. There must be more than that surely?

R u getting jvt via kies?
Sent from my GT-I9000 using Tapatalk

Yes upgraded a couple of hours ago

What country?
Sent from my GT-I9000 using XDA App

eloisant said:
What country?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Europe (XEU) Yayy JVT is official GB!

Tehpriest said:
What is new/different in this build? The only things I have noticed is the perpetual scrolling and blue end of page buffers. There must be more than that surely?
Click to expand...
Click to collapse
The only other thing I've noticed is social media integration with contacts. Details from Facebook, Twitter, Linked, Skype etc no longer show as unknown but are correctly identified.

Well, dint expected for quick official release of 2.3.5. Anyway, many of us had this long time ago.

still wifi dhcp bug is present???
currently i am on 2.3.4 JVR stock with semaphore 1.6, I don't want to take the risk as I only use wifi as my internet source

What about Phone FC in the leaked JVT, The official JVT it is said to be identical with the leaked JVT???

Wrong thread
Sent from my GT-I9100 using xda premium

I don't have any wifi dhcp bug but then I never had it before.

Can it be confirmed that the version released by KIES is the same as the leaked JVT?

I have seen some changes in the official release from the leaked...for example the overscroll in tw3 launcher and in the menu...at least i think so...

blue overscroll glow

It seems to be the same. Though I can't speak for specifics.
Sent from my GT-I9000 using XDA App

Just updated and now cannot conenct to mass storage.
On Kies connects at times. Uninstalled and reinstalled drivers. No use!
Have noticed that if you connect USB to charge the phone while it's OFF the phone will switch ON. Useless Idea.

Can someone please post the official Kies ROM? I want to get back on the official upgrade paths, as I'm passing my phone on.
I'm currently on JVS with XEU installed, but I can't see this update

black_math said:
Can someone please post the official Kies ROM? I want to get back on the official upgrade paths, as I'm passing my phone on.
I'm currently on JVS with XEU installed, but I can't see this update
Click to expand...
Click to collapse
I have JVT from the leak. Kies says its the current version. So that should be fine!

Weird, i just flash to JVT from the file RAMAD posted. When connected to kies it mentions this version of firmware cannot be updated.

New KL3 Build quite an Improvement!

Or is it me?!
Very fast intraOS movement. Browser also seems plain faster.
System and call sound better also.

rockky said:
Or is it me?!
Very fast intraOS movement. Browser also seems plain faster.
System and call sound better also.
Click to expand...
Click to collapse
I've got the Sheep ROM.
How would I go about getting and installing this? I can't do OTA upgrades because they don't come because I have a Custom ROM.
I can't do Kies, because it says it can't do SW updates.
Are you using a Custom ROM?

I wiped all (which you must do if coming from an odex'd rom) and installed Cassies V4 Rom with the new build and modem....then Abyssnote kernel?
Even without kernel...you can tell right off the build is a big stepup.

Don't think I answered your?
There's a thread in Dev section that has the link to the files
http://www.multiupload.com/8P1M2BGMXY
You can put on your phone and flash from recovery.
QUOTE=les_garten;20433640]I've got the Sheep ROM.
How would I go about getting and installing this? I can do OTA upgrades because they don't come because I have a Custom ROM.
I can do Kies, because it says it can't do SW updates.
Are you using a Custom ROM?[/QUOTE]

This soft is an improvement. It's far from satisfactory( android is still choppy as hell comparing to other OSes) but it's a step in the right direction.
I can report a better Wi-Fi range - I'm getting signal in some places in my house where I couldn't before.

No choppiness here...thing flies.

Does stock browser power saving levels works (any change in screen brightness)?
For me it worked well in KKA but not in KL3 .
Please test this for me.
Thank you.

ADW is still a bit sluggish, I'm using Cassie's KL3

PickleHead said:
ADW is still a bit sluggish, I'm using Cassie's KL3
Click to expand...
Click to collapse
If you change the cache to low quality it won't lag at all.
Sent from my GT-N7000 using XDA App

KLx series has problem with STK. I always get FC with my STK film. But I do not have any problem with KK1.

Confirmed. KL3 feels a bit faster.

This update has made a massive difference for me. I'm using ADW and widgetlocker and the phone now feels properly connected to my inputs on the screen, lag is pretty much gone. Much happier with the feel of the phone now.
I flashed through CWM and installed CFroot kernel for KL3 at the same time.

This things screams compared to KKA. I lost pinch to zoom in my Gmail Client. Anybody have any ideas about that?

Is this an update that we will get OTA? And what region are you guys in?
Sent from my GT-N7000 using xda premium

LordManhattan said:
Is this an update that we will get OTA? And what region are you guys in?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hi LordManhattan,
When I tried OTA, it says that my software is up to date. But when I connected my Note with Kies, it told me that there is a KL3 update. (From the Philippines but currently located in India).
For the record, I havent updated the software yet. Will do so by the weekend.

Updating via Kies
Question:
How do you update GNote via Kies? Is it through Kies Air? If it is through Kies Air, how? I do not see any Check Update button.
Or do I need to connect my Note to my computer via USB?
Thanks!

allansy said:
Question:
How do you update GNote via Kies? Is it through Kies Air? If it is through Kies Air, how? I do not see any Check Update button.
Or do I need to connect my Note to my computer via USB?
Thanks!
Click to expand...
Click to collapse
Ensure USB debugger is off, connect phone via USB. Launch kies. Wait for pop up. Check if you have the latest Kies if needed.

Damnit. Running Ubuntu, so no Kies for me. Anything else i can do?
Sent from my GT-N7000 using xda premium

i cannot see the KL3 update over OTA , neither with Kies for windows , i bought my galaxy note in switzerland , KKA firmware.
anyone else in europe got the KL3 update ?

no kl3 italy
same problem here no OTA and no kies.. been checking constantly.. lool...
i think its only india that have the update...
so i guess if we want it we just have to flash.....a rom from here

KL7 Fixes everything lag related - You should flash KL7

Seriously every Note user should flash Stock or a custom rom based on this KL7
Can get stock here: http://forum.xda-developers.com/showthread.php?t=1413120
I like many others had many issues with Lag and now my note litterally flies...!
And I haven't even put AbyssNote on it yet!!!!!
Also this KL7 fixes a bluetooth keyboard Issue I had with every previous rom. I had to mix and mash bluetooth drivers from my gtab and a sgs2 to get my bluetooth keyboard working but all resolved with KL7!!!
Am quite chuffed!

I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.

ManicDVLN said:
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
Click to expand...
Click to collapse
I would also appreciate knowing this!

I just flash kl7...avesome..smooth like hell..fast..some minore changes but much faster then kl3.
Sent from my GT-N7000 using xda premium

Agreed, KL7 is amazing.
No more lag anywhere, it's so fluid in everything it does now.
Even in the settings menu where it would be kinda jerky when scrolling in KL3, it's butter smooth now for example in KL7.

What's different about it to Kka, I'm on that and its smooth as already and it's android 2.3.6, isn't kl7 jut a regional version of kka?

kl7 is the latest firmware version

ManicDVLN said:
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
Click to expand...
Click to collapse
Basically use Odin 1.85 or mobile Odin to update.
Then apply CWM and root using the script in the CFRoot link that is also linked in the KL7 Thread.
Check the KL7 Thread for more information.

Only thing that still lags for me is phone.
Sent from my GT-N7000 using xda premium

Also the hueing in apps such as Xda app has also vanished.
“Phone? Tablet? Feel Free, It’s Galaxy Note”

thank you for your advise i try it and it was the best.

This firmware is available officially via Kies for me (German Note)

What is 2.3.6 KL7? official rom? need root to do this? Couldn't we wait for 2.3.6 update from Samsung itself?

tytung2020 said:
What is 2.3.6 KL7? official rom? need root to do this? Couldn't we wait for 2.3.6 update from Samsung itself?
Click to expand...
Click to collapse
It is a German official Samsung version can be found OTA (Over The Air) or via kies if your phone has/is flashed with a DBT code of CSC.
If you flash this after that you will wait for German updates only because region code will be DBT (debitel Germany) unlocked note for Germany.
Sent from my GT-N7000 using XDA App

Change CSC then do OTA
ManicDVLN said:
I never flashed a rom manually, how do I update my KKA firmware to this? Safest and least tampering way.
Click to expand...
Click to collapse
The last 2 updates were first rolled out for phones with the DBT CSC.
The latest KL7 firmware is available for phones with the German Debitel CSC.
To avail yourself of the update without using Kies, you can do an OTA(over the air) update.
Since the update is currently only available for phones set to the DBT CSC, if you change your phones CSC using this method here, you will then be able to update OTA by going to Settings > About Phone > Software update > Update. (Not all Note phones can have their CSC changed with this method)
Changing the CSC will reset your phone to factory settings.

tytung2020 said:
What is 2.3.6 KL7? official rom? need root to do this? Couldn't we wait for 2.3.6 update from Samsung itself?
Click to expand...
Click to collapse
It's getting very difficult to keep waiting for this to be rolled out! I have KJ4 and have been waiting for what seems forever. Why doesn't Samsung just do this for all devices at once?

I am currently using a hongkong offical rom.
It always lag for 2 seconds when I click the power button to activate the phone from standby mode. Does kl7 fix this issue？
Thanks!

I like everything, but Browser is mistakable zoom in.
But rom is HOT

kyleji said:
I am currently using a hongkong offical rom.
It always lag for 2 seconds when I click the power button to activate the phone from standby mode. Does kl7 fix this issue？
Thanks!
Click to expand...
Click to collapse
Yes. Yes it does.
Sent from my Samsung Galaxy Note using XDA Premium app.

Mine is still kind of laggy with Go launcher, tw is a no go for me, lacks to many features. I've tested with ADW and it's buttery smooth but compared to golauncher adwd lacks features as well.
(I'm a fan of go-widgets)