Related
Hi guys i have really bad problem there is NO WAY to connect my HD2 to PC in windows mobile. I have 5 years experience in WM and have been using my phones to sync until NOW-it simply wont work anymore.
I tried switching computers, always shows just charge, not Mass Storage or ActiveStink, the pop-up doesn't show, only charger is showed in taskbar.
I tried flashing stock ROM&radio (1.66), switching extra 2 computers and all ports on theirs an mine,
I tried going to Android and start pc connection and it WORKED, flashing (obviously) also works. only in (any) wm rom apparently doesnt. what the hell?!?
Soo, has anyone else seen this? please help i cannot even get complete schedule for next week to sync on my phone and i need it..
please, any help really appreciated!
http://forum.xda-developers.com/showthread.php?t=801018
you don't seem to get my point i have w7 and device cente and sync WORKED all the time. also USB works on android! and i can flash!
today it stopped working inside WM so i tried 4 different computers and stock rom and all their ports but phone still registers PC as charger an i don't see a popupp to select connection, it only charges. checked everything 1000 times and flash wipes everything off the phone so it should work fresh but it doesn't....
i'm guessing some kind of HW problem, but how can connection be sucsessful in android if that+s the case?!?!
i need some real help here...
okay i self bump myself as noone seems to take me seriously...
Today afrer recieving a call it put me on speaker right after the call started without even touching the screen! I also noticed that Navipanel opens itself randomly! that got me thinking....
...could it be that HD2 is recgnizing that it's being on Dock without being in? How's that done(hw switch or only software)? Is there a solution for that?
please guys.... and thanks bigtime for any additional info
dirty / faulty usb socket. give it a scrub with a dry toothbrush. read the threads "stuck in car kit mode".
not sure why it should work in android, but your symptoms (charge only, and calls go straight to speaker) are both seen by everyone with this problem.
samsamuel said:
dirty / faulty usb socket. give it a scrub with a dry toothbrush. read the threads "stuck in car kit mode".
not sure why it should work in android, but your symptoms (charge only, and calls go straight to speaker) are both seen by everyone with this problem.
Click to expand...
Click to collapse
thank you will do that!
i thought that android isn't coded to support car kit so it can bypass the "flaw" if it doesn't know what's the signal for
thx a bunch!
UPDATE:
Solved problem with scrubing on usb port with toothbrush to clean the dust away, but it still didn't work right away so i had to MOVE CONNECTED usb cable to all directions pretty hard. it started working while pushing on RIGHT. thanks to samsamuel!
After months of no problems yesterday I plugged my phone in for its nightly charge and noticed that it did not trigger the usual USB mount prompt.
I assumed it was Windows, but I have a bunch of machines and operating systems so I checked and they all has the same result. I switched out cords and did a complete power reset (taking battery out) no change.. The Phone charges through the USB but the computers say "unrecognized usb device" and cannot mount the phone as a drive and the phone does not offer the option as it used to???
I don't recall getting any sort of update that might have related to this?
This is the original T-mobile version
This happens to me all the time. However a restart of my phone and computer solves the issue.
DarkAgent said:
This happens to me all the time. However a restart of my phone and computer solves the issue.
Click to expand...
Click to collapse
Neither of those things worked for me. There's gotta be something else to it.
jrocka01 said:
Neither of those things worked for me. There's gotta be something else to it.
Click to expand...
Click to collapse
Go over changes you made to your phone recently.
only flashing another ROM worked for me... try reflash ur ROM, and wipe stuff if it doesnt work
DarkAgent said:
Go over changes you made to your phone recently.
Click to expand...
Click to collapse
This all started when I manually installed 2.3.4. Everything else works fine. I'm not the only one with this problem.
roshga said:
only flashing another ROM worked for me... try reflash ur ROM, and wipe stuff if it doesnt work
Click to expand...
Click to collapse
How do you do that without USB connectivity?
It is very frustrating, maybe a hardware fail? I see just enough post relating to the issue that makes me know it is real but not sure how to resolve,, Do we have to go to Best Buy? or is there a direct Samsung route?
This too happens to me. Whenever I plug it into my laptop on the top USB slot, it doesn't recognize it. If I plug it in on the bottom USB slot, it does. Not sure why. This, however, is only the case if I'm using a different USB cable than the one that came with the phone itself. Once again, not sure why.
Perhaps you are using an alternative USB? Or plugging in on the top? Not sure how I can help you more than that, sorry. Hope you find a fix!
Sent from my Nexus S using XDA App
Have you tried a different USB cable?
Sent from my Nexus S using Tapatalk
unforgiven512 said:
Have you tried a different USB cable?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Using official OEM cable that came with the phone. And, again, USB worked fine until I manually installed 2.3.4.
Well It is off to Samsung for repair
After time on phone with them and a factory reset belief is that the usb connector is defective. BTW Best Buy just hands off to Samsung 1-800 #
So Back to a barely functional G-1 for a while, glad I could find it!
DarkAgent said:
This happens to me all the time. However a restart of my phone and computer solves the issue.
Click to expand...
Click to collapse
Recently started happening to me, needed to transfer some files off, had to resort to dropbox etc.. rebooted phone+computer ,still not working.
Came good a few days later using same equipment, same cable,
Mysteriously fixed itself ?
Last week when I plugged my USB cable into my phone, it acted normal. The screen where it asks me if I want to connect USB came up, and I said yes. Everything was normal. It was baller.
Today, that doesn't happen. The screen doesn't come up and all the USB cable does is charge my phone, much like the wall plug does.
I've tried to install USB drivers, but they always require me to find "Android" in Device Manager, and it's never in there. The USB cable is doing nothing but charging my phone.
I managed to add a few mp3s over wifi, just to make sure that was actually working.
The phone is not rooted, (I was actually just going to try to do that) and everything is stock aside from a few apps.
I would really like some insight on this, please.
Do I need to get the phone replaced? Am I doing something wrong?
OK, I new to this, but thought I'd comment. If USB debugging is turned on, my seems to do that.
Settings -> Applications -> Developement -> USB Debugging
Beowins said:
I would really like some insight on this, please.
Do I need to get the phone replaced? Am I doing something wrong?
Click to expand...
Click to collapse
Did you change your kernel recently?
Sent from my Nexus S using XDA Premium App
sagech said:
Did you change your kernel recently?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I've done nothing to the phone. Only installed a few random apps.
sorry to hi-jack your thread!
mine does exactly the same, but all i've done is manually update to 2.3.4 and my usb hasn't worked since, like you i've tried installing the drivers and that's done nothing and its also in usb debugging.
i don't know what to do or how to get it to work again, all my searching on here and via Google don't bring up much
Beowins said:
Last week when I plugged my USB cable into my phone, it acted normal. The screen where it asks me if I want to connect USB came up, and I said yes. Everything was normal. It was baller.
Today, that doesn't happen. The screen doesn't come up and all the USB cable does is charge my phone, much like the wall plug does.
I've tried to install USB drivers, but they always require me to find "Android" in Device Manager, and it's never in there. The USB cable is doing nothing but charging my phone.
I managed to add a few mp3s over wifi, just to make sure that was actually working.
The phone is not rooted, (I was actually just going to try to do that) and everything is stock aside from a few apps.
Click to expand...
Click to collapse
Put your phone into bootloader mode and try whether it detect or not?
And also, see if there is two line of words written
USB init start
USB init end ;-)
Sent from my Google Nexus S using XDA Premium App
Try another usb cord, and especially if you're using the samsung cord.
I had the same issue but when I switched to my Htc cord and my blacbkberry cord, everything worked as it should.
Sent from my Nexus S 4G using Tapatalk
plmiller0905 said:
Try another usb cord, and especially if you're using the samsung cord.
I had the same issue but when I switched to my Htc cord and my blacbkberry cord, everything worked as it should.
Click to expand...
Click to collapse
ive just tried my works blackberry usb cable and it works fine now! very odd! thanks for your help
onslack said:
sorry to hi-jack your thread!
mine does exactly the same, but all i've done is manually update to 2.3.4 and my usb hasn't worked since, like you i've tried installing the drivers and that's done nothing and its also in usb debugging.
i don't know what to do or how to get it to work again, all my searching on here and via Google don't bring up much
Click to expand...
Click to collapse
Wow, this is my post, verbatim. Any ideas or fixes?
plmiller0905 said:
Try another usb cord, and especially if you're using the samsung cord.
I had the same issue but when I switched to my Htc cord and my blacbkberry cord, everything worked as it should.
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Wow, you're right. My HTC cord worked. Thanks a lot.
I have had this happen on to me and have determined that a) the long cable that came with the NS4G is unreliable when used for USB connectivity with my PC. Shorter cables (even the shorter Samsung cable that came with my Epic) work consistently. I am guessing that this is a USB Bus power issue and some people will have better mileage than others using the stock cable, depending on their PC.
b) on a few occasions, it seems I've somehow borked the PC's USB controller and the PC wouldn't recongnize anything until I rebooted it.
window7 said:
Put your phone into bootloader mode and try whether it detect or not?
And also, see if there is two line of words written
USB init start
USB init end ;-)
Click to expand...
Click to collapse
I am getting the
USB control init
USB control init end
when in bootloader and when doing the i press vol up and vol down (triangle with android in it" with downloading below).
I would like to flash my phone to factory using Samsung Simple downloader for NS4G.
Background, installed Ice Cream but didn't have radio.img so used an SU to downgrade back to 2.3, did that but no mobile network. Then the phone updated to 2.3.6 and now getting that error. Any help will be appreciated.
I searched a few times on this forum and on google.com no luck. tried to adding a recovery file manually and zip it as update.zip and install from bootloader no luck. (use file explorer and dropbox to get files on to phone).
Thanks
Amar Bar
i had this issue a few months ago, turns out the usb port on the phone got defective so i could only charge it but not use the mass storage function, had to get it replaced under warranty! hope this isnt the issue with you guys
innisdb said:
i had this issue a few months ago, turns out the usb port on the phone got defective so i could only charge it but not use the mass storage function, had to get it replaced under warranty! hope this isnt the issue with you guys
Click to expand...
Click to collapse
Was your phone rooted at any point before the issue? Not sure if they would fix it under warranty for me. I will call Samsung and see.
Thanks, I tried that but no luck. Still need to tried other cords. Also.
My phone developed this problem a couple days ago. I haven't done much to troubleshoot it...figured the port must be damaged.
(Not using the Samsung cable, btw)
AardvarkAdventure said:
My phone developed this problem a couple days ago. I haven't done much to troubleshoot it...figured the port must be damaged.
(Not using the Samsung cable, btw)
Click to expand...
Click to collapse
It might be the port. I will have to get a samsung cable and try it, but i doubt it will help. Plus i can tell Samsung I tried everything. (I looked a ticket, but they said get a samsung cord, they don't trust the Palm Pre cord i am using).
I had to downgrade to the HTC Hero until i get the phone fixed.
Hey gang. Wondering if you can help me with a strange issue I've got. I can't seem to connect my phone to my computer via USB. Wondering if anyone could help determine if there's a possibility of repair or not.
==Possibly relevant info==
Samsung Vibrant
Android 2.2 Froyo
Kernel version: 2.6.32.9
Build number: FROYO.UVKB5
==End relevant info==
So, my USB is acting up. Has been for the last few months, where although it charges when I plug into a computer, it's not connecting to allow data transfer. I haven't been too terribly worried, this happened before then cured itself when I did a factory reset. The thing that usually triggered it was when I tried connecting to my linux box in media player mode. The phone would just kinda lock up, I'd have to restart it and then USB wouldn't connect. But after doing the factory reset it was fine the first time. THIS time however, since I'd just left it stock now I'm itching to flash a custom rom but even though I've wiped the whole stupid phone totally clean, it still won't connect. I'm trying to follow a method on an article on dkszone.net called "Bypass E - Signature Verification Fail Issue On Vibrant Android 2.2".
So it seems I need USB for the debug mode.
What I think my main problem is, and where I need some help, is that I had purchased a super cheapwad USB car charger off of amazon for like 35 cents. Every time I connected to it, my phone would ask me if I wanted to connect using kies, media player mode, or data storage mode. I thought it was annoying but didn't really think it would harm anything. But now that I'm thinking about it, it's probably been pumping 5v into each pin on the USB port, whereas the USB functionality uses probably 3.3v, and I'm afraid I cooked something.
The random part here though is that about 5% of the time it does (sortof) connect. It brings up the USB options when I want to connect, brings up the icon saying it's using debug mode, etc. But my machine just reports that it didn't recognize the USB device. So, I'm thinking it's on the fritz, but figured I'd check here to see if I could possibly find a ray of hope.
Scooterx3 said:
So it seems I need USB for the debug mode.
Click to expand...
Click to collapse
You can use ADB over tcpip. There's many a free widget to enable it on google play or Do it manually
Thanks for that, I had been wondering if there wasn't a way to do that over wifi. My issue is that sadly I haven't even rooted the phone. ADB over WiFi requires root, whether I do it manually or use one of those super sweet apps.
So anyways, guess what?
My brother in law has the same phone I do, and I grabbed his phone one day and plugged it into my computers and had the same problem as with my own, and I know he hadn't plugged into the same charger I had, hadn't tried the media mode on Linux like I had (which were what I thought were the big contributing factors). SO, I kept digging, found that I hadn't quite yet cleaned it properly. I'd tried my best to clean it but until I swabbed it well with some rubbing alcohol it wasn't as clean as it should've been.
Long story short, I'm backing everything up so I can start flashing roms.
Moral: just clean the dang thing really well
Hi all,
Have just started to connect my device so i can pull the patched boot image for my thread and it won't see the computer, tried on several laptops and nothing, no adb, no fastboot.
It charges just fine but does not show the android usb system notification.
Really annoyed by this as i'm kind of stuck.
I'm on 7.7 but on a custom ROM / Evo X 5.9.1, doesn't look like anyone else has this issue besides me, have seen the odd user complaining about the same thing but haven't seen any fixes come up], if anyone has any ideas then i'd be grateful to get your two cents.
Will test MSM but it's not looking good, fearing a return to oneplus as i do have a good unit with none of the issues anyones ever listed like green screen and overheating problems.
It's usually me helping others but this time i need you guys help
Check USB cable / clean the Charging port? sometimes it helps.
dewa5227 said:
Check USB cable / clean the Charging port? sometimes it helps.
Click to expand...
Click to collapse
Aye I've cleaned it up mate.
Tried different cables, I think EDL mode is working.
Means I could maybe return to OOS but it wouldn't let me back up..
Shame, I'm just downloading MSM now... Really annoyed..will give the usb socket another clean
dladz said:
Tried different cables, I think EDL mode is working.
Click to expand...
Click to collapse
well, it's a good sign , hopefully, it will be resolved out.
dewa5227 said:
well, it's a good sign , hopefully, it will be resolved out.
Click to expand...
Click to collapse
Yea I'm dreading it being hardware. Never had this issue on OOS.
I think it may be Evo X but I don't know.
Bad luck I guess
Cheers anyway.
So MSM did indeed work, it's booting now, obviously couldn't back up any of the info on the device so i'm super annoyed at that but so long as usb connectivity works then i'll be happy with that.
USB Connectivity does NOT work now so i CAN connect to EDL mode but not normal usb conenctivity.
Anyone have any ideas???
Cannot root, install anything via ADB or even delete apps via ADB. Shocking problem to have man
I'm RMA'ing my phone, just getting it set up now.
Very painful process, they absolutely need the purchase order for warranty, things have changed with 1+
3-10 days apparently, used to be 5 when i've sent it in the past.
On connecting a USB hub i can read USB sticks and i can control my phone with an xbox pad??
Am i missing something? How is all this working yet i can't mount my phone?
Best bet, probably you broke the charging port. did you by any chance use like force usb charging like that?
dewa5227 said:
Best bet, probably you broke the charging port. did you by any chance use like force usb charging like that?
Click to expand...
Click to collapse
I did use the force USB charging yes.. wishing I hadn't now..
I also connected to a usb-c to hub to connect a screen.
Issues kind of started after that.
Physically I haven't damaged it from movement. But could be from the forced charging
UPDATE:
Erm ok this is confusing???
I just connected my phone to a charger that is clearly not rated for it, in the hope it would shock the device, i then connected my phone and made a cup of tea, when i got back my phone showed me this (screenshot attached)
??? Lol what the hell? I've already booked my RMA lmfao
anyway, i shall keep an eye on it, i'll thoroughly test it and get it back up and running.
Strange, very strange.