Related
I got my HTC touch activated on boost mobile unlimited and i got the network to work, txt'n and calls, but cant seem to get the tethering to work on the BOOST CDMA NETWORK, and yes i get 3g speeds.
Any Ideas?
Got it working by doing this, and yes I HAVE A HTC TOUCH SPRINT ON BOOST CDMA MOBILE NETWORK
directions on how to tether a mogul,touch pro, touch diamond.snap or any other windows phone so here it goes
go to resco.com and download the trial version of registry editor and follow this path
Using a registry editor, make the following changes:
HKey_local_machine\Comm\InternetSharing
Delete this string: Extension - isext.dll
next delete this string aswell = forcecallconnection
Hkey_local_machine\Comm\InternetSharing\Settings\F orceCellConnection
once these strings are deleted the the phone will use the packet data settings for the internet sharing feature and boom no more error 67 when you are using the pam and you get a little better speeds because you are not using the third party app and it is free. when the trial version of resco expires your settings will remain the same and you can uninstall the registry editor and the pam will still work have any trouble let me know
BUT DO NOT DELETE ANY OTHER STRINGS UNLESS YOU KNOW WHAT YOU ARE DOING THIS IS THE CORRECT SETTINGS FOR THE INTERNET ONLY . if you have any trouble let me know i will guide you threw the process
how do you get the internet to work on your boost phone?
yes its activated now. I can do video or what ever and its not the chip im suing the CDMA network. they have CDMA down south I have instructions. I've dont it 5 times for friends. I have picture mail, Tethering 3g EDGE, Great coverage unlimited for 50 dollars, EVERYTHING,
Its this simple here my simple 123 list
1 bought 60 dollars worth of minutes. you need 65 cause of activation fee. I got him to waive the fee.
2.get it activated BOOST CDMA ONLY, I USED MOTO c290 for BOOST. use it for a few hours. Use one of the the 13 states that have the service, if yours is not avail on the list dont try it, wont work. I USED FLORIDA NC,TX,CA work
3 call back with other phone get DEC using the back label or ##786# (new Phone)
4 They will give you your MSL code something like ##343456# change number and msid. it should reboot.
5 go to ##3282# and reset your network settings, if the net doesn't work, soft reboot twice. and boom. you got it working
This works on all SPRINT PHONES. Enjoy
Do you need to activate a boost cdma phone first
Do you need to activate a boost cdma phone on the account first and then call and change to the ESN of the HTC phone or can you activate the sprint phone on boost
Not working for me?
I completed all 5 steps, and the first 4 worked, but to use ##3282#, and tell it to reset the internet (mine says "Update Profile?"), when I do that it says:
"Preparing Vision Services, Please Wait..." then it Resets the Radio, and says "Error #1012 Provisioning Error.
It is trying to provision it connecting to Sprint with my Boost Mobile (@myboostmobile.sprintpcs.com) username... will that effect it? Phone and texting work, just no internet (haven't tested MMS yet
in order for the phone to provision you need your user name and password on the connection part(#777) should be something like [email protected] and you password should be a 6 digit one if you dont know the password try to just leave it blank.
boresight said:
Do you need to activate a boost cdma phone on the account first and then call and change to the ESN of the HTC phone or can you activate the sprint phone on boost
Click to expand...
Click to collapse
yes you need to activate the phone first then do a ESN Swap, no way around it.
I completed all 5 steps, and the first 4 worked, but to use ##3282#, and tell it to reset the internet (mine says "Update Profile?"), when I do that it says:
"Preparing Vision Services, Please Wait..." then it Resets the Radio, and says "Error #1012 Provisioning Error.
It is trying to provision it connecting to Sprint with my Boost Mobile (@myboostmobile.sprintpcs.com) username... will that effect it? Phone and texting work, just no internet (haven't tested MMS yet
Click to expand...
Click to collapse
Do you see a reset? what you want is IOTA to begin when you restart the phone, by resetting the network profile. it will not effect anything but the internet. so everything should work.
In the ##3282# menu the only buttons I have are "Update Profile", "Modify", and "Next" which goes to another screen of data settings.
I am running a Palm Treo 800w... so it may be a little different. Palm seems to have tried to improve things, but right now the Provisioning/Activation screen that pops up anytime I try to access data is driving me nuts... I can send screenshots if u think that may help.
yea that could help there should be a soft key item that says reset. And BTW its windows mobile right?
boost web settings for touch pro
i have the unlock code for it now what should I change the number to.and what should I change the msid to??? I've never been able to use the web on this thing.only text and phoneI had it flashed to silence rom6.5.But i just flashed back to a stock rom hoping that would fix it thanks in advance
remygreen said:
yes its activated now. I can do video or what
ever and its not the chip im suing the CDMA network. they have CDMA down south I have instructions. I've dont it 5 times for friends. I have picture mail, Tethering 3g EDGE, Great coverage unlimited for 50 dollars, EVERYTHING,
Its this simple here my simple 123 list
1 bought 60 dollars worth of minutes. you need 65 cause of activation fee. I got him to waive the fee.
2.get it activated BOOST CDMA ONLY, I USED MOTO c290 for BOOST. use it for a few hours. Use one of the the 13 states that have the service, if yours is not avail on the list dont try it, wont work. I USED FLORIDA NC,TX,CA work
3 call back with other phone get DEC using the back label or ##786# (new Phone)
4 They will give you your MSL code something like ##343456# change number and msid. it should reboot.
5 go to ##3282# and reset your network settings, if the net doesn't work, soft reboot twice. and boom. you got it working
This works on all SPRINT PHONES. Enjoy
Click to expand...
Click to collapse
blackbolo said:
i have the unlock code for it now what should I change the number to.and what should I change the msid to??? I've never been able to use the web on this thing.only text and phoneI had it flashed to silence rom6.5.But i just flashed back to a stock rom hoping that would fix it thanks in advance
Click to expand...
Click to collapse
You actually need the MIN and the MSID, both of which are provided by your carrier (MSID is your phone number if I'm not mistaken).
Can't find it on resco
missbehaven said:
Can't find it on resco
Click to expand...
Click to collapse
You can't find what on Resco?
Solution
The solutions that worked for me :
I did a ##3282# and put my 6-digit MSL code. From Menu --> Restore. This basically removed previous Sprint settings but did not put new Boost network settings.
I then went to Start --> Settings --> System tab --> Update Profile. This update took about 3 minutes and at end of which my web works on the device.
If I ever go into the ##3282# now, I see the Boost network connection settings!
No Hassle IDEN to CDMA Switch on Boost
I have read so much on these forums and other forums about how to get this accomplished until my eyes were crossed. So finally, I just said, "what the heck" let me just give boost support a call. Now, I have already been a boost IDEN customer for over a year. My phone was the Nextel 8350i. I used one of boost cheap phones to start my service back then and immediately went to activate my phone on boost website and the 8350i worked. Of course I had to copy the correct copy books and setting to get all of the functions to work on that phone.
Anyway, late last night, after midnight CST, I called boost support and told them I want to migrate my service from IDEN to CDMA. The rep never asked me what kind of phone it was, only for the DEC number. I gave her that and she switched my service. However, she told me that Boost was experiencing some technical issues and that my service wouldn't be on until the morning. This morning everything seemed to be working OK, not great and my text messaging was fully working. I called Boost and they told me it will take 48 to 72 hours for my text to work to other carriers, but it will work now on sprint, nextel and boost. I guess I will see if my text works in a few days, but besides that everything was pretty smooth. I can't believe that after all the reading and all the things these forums are telling people, I can't believe it was so simple.
if you have a 8350i you have idem and will be idem for ever.you only get cdma service with a cdma phone.
Works Treo Pro on Boost Mobile USB tether
Well I followed the instructions and performed the following steps and it works for me.
1. Download PHM Registry Editor (ver 0.70 I think was the one most found)
2. Change the word (ForceCellConnection) to (OldForceCellConnection) in the selected internet sharing directory. Yes the file comes back, but I think this somehow releases the ghosting/menu drop down selections.
DIRECTORY WAS HKEY_LOCAL_MACHINE/INTERNET SHARING/SETTINGS
3. Went into the folder right above that HKEY_LOCAL_MACHINE/INTERNET SHARING/ and deleted all the files in that folder.
4. Pulled the battery.
5. Went into PROGRAMS/INTERNET SHARING
6. Set up the modem to work either usb and bluetooth with my laptop.
Tested the tether speed today and it came back 1.93 Mbs download and 0.51Mbs upload. bluetooth was a little slower.
My OLD phone was a 8350i, my new phone is a Sprint HTC Touch Pro, and I just called Boost and told them I wanted to switch from iDEN to CDMA and they switched me without issue.
HTC Touch Pro 2 boost USB tethering
The steps above removed the "Error 67" and the computer sees the phone as a modem. But the phone status hangs for ever on "Waiting for network".
Thank you all for the previous threads. Is there something new I should do in order to have tethering?
Thanks again.
Note: I don't want WiFi tethering, only USB to computer tethering.
I was searching this site to find the answer. I have a T-mobile my touch with cyanogenmod 6.0.0-ds that I bought off e-bay. I could not get data to work on consumer cellular. I came accross this site markandkelley dot com (I cann't post a link yet) and was able to get enough info from my wife's samsung a697 settings from consumer cellular and that link change my settings to get my data plan to work.
I went APN's and changed the
APN : att.mvno
proxy : proxy.mvno.ccmobileweb.com
and it works!! I hope this can be helpful to others.
Appreciate the help, I'll see if it works as soon as I get within cell range again.
It's weird.. I finally got data to work but if i try to call out it just has a busy signal and if i try to call the phone it goes to voice mail.. wtf?
boredmug said:
It's weird.. I finally got data to work but if i try to call out it just has a busy signal and if i try to call the phone it goes to voice mail.. wtf?
Click to expand...
Click to collapse
Did you finish the process with QPST after using CDMA? If your getting a fast busy signal like sound, it's more then likely Cricket not having your correct ESN. Do you have an account setup already and have provided them your converted MEID #?
My friend had given me the wrong MIN number.. for some reason data still worked. Changed the MIN and walla.. Find out another thing later that day though.. Google voice acts crazy with cricket on a flashed Droid X. Made it pretty much impossible for someone to call me. Would actually say the number is no longer in service. Tried to deactivate call forwarding from the info in account settings for google voice. it says to dial *740 on your phone and hit call.. Doesn't work. *720 WILL fix the issue though. Something to do with Cricket not doing conditional call forwarding. .
boredmug said:
My friend had given me the wrong MIN number.. for some reason data still worked. Changed the MIN and walla.. Find out another thing later that day though.. Google voice acts crazy with cricket on a flashed Droid X. Made it pretty much impossible for someone to call me. Would actually say the number is no longer in service. Tried to deactivate call forwarding from the info in account settings for google voice. it says to dial *740 on your phone and hit call.. Doesn't work. *720 WILL fix the issue though. Something to do with Cricket not doing conditional call forwarding. .
Click to expand...
Click to collapse
Glad to hear it's working. Actually, funny thing with Cricket and data...as soon as your done with CDMA, you will have data. Let's say you have a data plan already on your phone and you buy another phone you are going to upgrade to. You can still flash your new phone to Cricket and while your old phone might not have voice calls/texts, you can surf the web on both phones still getting perfectly clear 3G where it's available
YEA! I have a friend that i flashed a mogul and a Touch pro to cricket back in the day. He had the mogul activated and was still able to surf the web with the Touch pro. Nice little bonus i guess. lol
ok, so its been awhile since i have been on xda. i just got my hands on a droid x yesterday and have spent pretty much 8-12 hrs trying to figure out how the **** to flash it to cricket. can u pls post or redirect me to a site that has good instructions oon how to flash it. and yes befoore u start flaming me i have been through xda, ppcgeeks, howard forums, and droid forums. everythbing so far has been crap. i feel like a lost puppy damnit. pls help...
akaruna said:
ok, so its been awhile since i have been on xda. i just got my hands on a droid x yesterday and have spent pretty much 8-12 hrs trying to figure out how the **** to flash it to cricket. can u pls post or redirect me to a site that has good instructions oon how to flash it. and yes befoore u start flaming me i have been through xda, ppcgeeks, howard forums, and droid forums. everythbing so far has been crap. i feel like a lost puppy damnit. pls help...
Click to expand...
Click to collapse
There used to be an online tutorial on how to flash a DX to Cricket but the whole forum has been down for a while. Its a lengthy process to flash and as you already know, it takes a long time if you don't know what you are doing 100%. Techs charge up to $90 for this flash for a reason...they know the ins and outs and have a guide that's taken time and patience to make. Like myself. I can flash any Motorola Droid to Cricket in less then 10 minutes. Its taken me hours to get that fast and lots of trail and error.
What part are you having trouble with?
Sent from my DROIDX using XDA App
not sure why the other person hasnt answered but I would like some help with the same issue. I can talk and text fine via the PRL change. I can use anything CDMAWS and QPST to edit my phone but after i try using a nvram backup from whiterabbit or whether i try to edit the settings using QPST the phone restarts as normal and u see the data bar going from 1x to 3g and the phone soft resets over and over. ideas? I would like to at least get the net working. from there im sure i could resolve the next issue.
furikazashi said:
not sure why the other person hasnt answered but I would like some help with the same issue. I can talk and text fine via the PRL change. I can use anything CDMAWS and QPST to edit my phone but after i try using a nvram backup from whiterabbit or whether i try to edit the settings using QPST the phone restarts as normal and u see the data bar going from 1x to 3g and the phone soft resets over and over. ideas? I would like to at least get the net working. from there im sure i could resolve the next issue.
Click to expand...
Click to collapse
CDMA or QPST should not be causing your phone to reset unless you accidently changed a setting in QPST. Which PRL are you using? Most stable is 49027 for the DX at the moment. Did you have these issues before the flash? Did you buy the phone used and then started the flash process? I hope you didn't get a busted DX
Ben's said:
CDMA or QPST should not be causing your phone to reset unless you accidently changed a setting in QPST. Which PRL are you using? Most stable is 49027 for the DX at the moment. Did you have these issues before the flash? Did you buy the phone used and then started the flash process? I hope you didn't get a busted DX
Click to expand...
Click to collapse
My OTA update gave me 3200 PRL.
bigshotrob22 said:
My OTA update gave me 3200 PRL.
Click to expand...
Click to collapse
Which is an older PRL. Might even be geo-specific. How are your 3G speeds with the 3200? 49027 is the newest one that I know of.
Ben's said:
Which is an older PRL. Might even be geo-specific. How are your 3G speeds with the 3200? 49027 is the newest one that I know of.
Click to expand...
Click to collapse
3G Speed is pretty good. I am on the $45 plan. Are you on the android plan?
bigshotrob22 said:
3G Speed is pretty good. I am on the $45 plan. Are you on the android plan?
Click to expand...
Click to collapse
Ahh, that must be why it works! I am on the $55 plan and my 3G speeds are consistent 1.2Ghz when stupid iJunk users aren’t bogging down AT&T's network. When speed is at it's best, it always beats out my girlfriend’s Droid X 3G speed on Verizon, not by much but enough to say so.
Im using 49027. I've narrowed it down to possible glitch. Upon entering the info for the proxy manually it goes into 1x then 3g then reader loop. Ivebeen using a stock backup to revert to prior tweaking so I can keep trying to figure this out if u have a exact method u use im all ears. Or just ideas. Im running out lol
Also one more thing, ive just entered in the proxy information manually via the cell phone and the phone hasnt given me a boot loop like it used to, still the internet isnt working yet so im going to go into QPST and see if just changing the mobile IP setting throws me into the loop again...EDIT: it sends me into a soft restart loop since its on mob+simp f/back again... catlog didnt show anything that i can see sadly. the soft restart forces the log to stop and doesnt show why it did.switched it back to mobile ip only and stopped the reboot cycle but no data at all ugh...
Sent from my DROIDX using XDA App
Grr... ugh... yea so I've had a very very long two weeks. Work work work... did I mention work??? Lol. Yea but n e way I totaly forgot about this post and just happen to run across it again. Well I got the pro inserted and now im trying to figure out how to get the net workin. Im thinking ojust upgrading to the android plan or getting a new number. Now I need help with that. I've already transfered my number to the droidx and it kept sendinme through the boot loop when I would do the autostart.sh that is found on another forum... so now I ned help figuring this out so I can reswitch it to the droid x again. Or just upgrade the plan and I would need to find the right settings for that... thx for the reply btw.
akaruna said:
Grr... ugh... yea so I've had a very very long two weeks. Work work work... did I mention work??? Lol. Yea but n e way I totaly forgot about this post and just happen to run across it again. Well I got the pro inserted and now im trying to figure out how to get the net workin. Im thinking ojust upgrading to the android plan or getting a new number. Now I need help with that. I've already transfered my number to the droidx and it kept sendinme through the boot loop when I would do the autostart.sh that is found on another forum... so now I ned help figuring this out so I can reswitch it to the droid x again. Or just upgrade the plan and I would need to find the right settings for that... thx for the reply btw.
Click to expand...
Click to collapse
Did you do this?
Open QPST Service Programming
You should see your phone listed in the list. Select it, click Start
Clients>Service Programming. When it opens select your phone and click OK in
the Service Programming screen.
On the bottom left click a button labeled Read from Phone, a box will
popup, there should be 000000 already typed in, click OK. this may take a
few minutes.
Go to the M.IP tab. Click on the entry in the User Profile box and click
Edit. Make sure that NAI and Tethered NAI both read [email protected]
(replace the x's with your 10 digit phone number). If they don't, type it
in. Also make sure Home Address, Primary HA Address and Secondary HA Address
read 0.0.0.0 if they don't, change them. Click OK
While still on the M.IP tab make sure Mobile IP Behavior is set to Mob +
Simp f/back. And make sure Active User says 0.
Go to the PPP Config tab. Click UM button. In the PPP Authentication
section make sure Tethered NAI and User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password.
While still in the PPP Config tab click the AN button. In the PPP
Authentication section make sure User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password. Tethered NAI should be blank.
Now on the bottom click Write to Phone. May take a few minutes and your
phone may restart.
Flash the Cricket V10 zip and download autostart root from the market
bigshotrob22 said:
Did you do this?
Open QPST Service Programming
You should see your phone listed in the list. Select it, click Start
Clients>Service Programming. When it opens select your phone and click OK in
the Service Programming screen.
On the bottom left click a button labeled Read from Phone, a box will
popup, there should be 000000 already typed in, click OK. this may take a
few minutes.
Go to the M.IP tab. Click on the entry in the User Profile box and click
Edit. Make sure that NAI and Tethered NAI both read [email protected]
(replace the x's with your 10 digit phone number). If they don't, type it
in. Also make sure Home Address, Primary HA Address and Secondary HA Address
read 0.0.0.0 if they don't, change them. Click OK
While still on the M.IP tab make sure Mobile IP Behavior is set to Mob +
Simp f/back. And make sure Active User says 0.
Go to the PPP Config tab. Click UM button. In the PPP Authentication
section make sure Tethered NAI and User ID reads [email protected]ricket.com
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password.
While still in the PPP Config tab click the AN button. In the PPP
Authentication section make sure User ID reads [email protected]
(replace the x's with your 10 digit phone number) and Req PW enc is checked
and type cricket in for the password. Tethered NAI should be blank.
Now on the bottom click Write to Phone. May take a few minutes and your
phone may restart.
Flash the Cricket V10 zip and download autostart root from the market
Click to expand...
Click to collapse
Yup, except for the v10 zip. No mention of that before...
akaruna said:
Yup, except for the v10 zip. No mention of that before...
Click to expand...
Click to collapse
You can find it here: http://forum.xda-developers.com/showthread.php?t=730289
Just flash it in ROM Manager
I've talked to a couple of folks on the V10 token. Some say it has no relevance and one said it might actually harm your phone since it's not even made for the Droid X specifically. I tried it and it didn’t do anything. It came to be that my MNC in my APN was incorrect.
Without doing a full SBF on your phone, there array of issues you might have are to wide to diagnose. You need to start over and not use your backup. If the problem still persists then let us know but I doubt it will if you did the Cricket flash properly.
Have you changed your APN settings as well? I use anycut from the market to edit and save it.
Ben's said:
I've talked to a couple of folks on the V10 token. Some say it has no relevance and one said it might actually harm your phone since it's not even made for the Droid X specifically. I tried it and it didn’t do anything. It came to be that my MNC in my APN was incorrect.
Without doing a full SBF on your phone, there array of issues you might have are to wide to diagnose. You need to start over and not use your backup. If the problem still persists then let us know but I doubt it will if you did the Cricket flash properly.
Have you changed your APN settings as well? I use anycut from the market to edit and save it.
Click to expand...
Click to collapse
I've always used it and it does help. It has never broken my X. I don't know why why it doesn't work for you but I've used it on my old ERIS, Droid X, and my wifes DInc.
Sent from my DROIDX using XDA App
Hey people, new here, just finished getting my EVO 4g on boost. however i have no data. ##debug# says im on cdma with EVDO rev a also 3g icon is up with dancing arrows. when i hit internet and try to goto a site it times out after a min with dreaded page not found.
I have poured thru the extensive toots on this site with no avail, and spent atleast a 3 days non stop trying to get this to work. the misses is real upset with me and threatening all types of boycotts because of my "neglect" so any help dealing with this would be appreciated.
Im assuming this is some sort of authentication failure but again when i check debug mode under EVDO ( an/aaa authentication) i get Authenticated. im stumped at this and cant find a situation quite like this on any post in any forum.
what i have:
Ive got HTC EVO 4G non rooted with Incognito as don'. incognito was activated before the surgery. albeit very briefly.
3g icon with arrows. CDMA EVDO REVa listed under status
What i dont have:
Internet...1xRR or 3g
called up boost ATS ( by the way to skip thru the endless automated messages press "88" as the dude asks if you want spanish, you will be connected immediately...then ask for advance tech support...dont waste ur time with the first person). anyway they told me the phone would need 24-72 hrs to provision, i then told them its was going on 4 days , they then told me there was a delay with there provisioning servers because of an outage in my area. could this be true since my other boost phones work fine?
so to recap my issue is getting 3g to work...since not even 1x works at the moment.
Update you're profile
If that doesn't work ##33284# go down to data what does it say 1xrtt or evdo A , if it says evdo rev A, and you did an update profile already something mis inputted in qpst
Sent from my SPH-D710 using xda premium
kevo3000 said:
Update you're profile
If that doesn't work ##33284# go down to data what does it say 1xrtt or evdo A , if it says evdo rev A, and you did an update profile already something mis inputted in qpst
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It says Evdo Rev A . I forgot to do the update , but I just did it now, with same results. still says Evdo...
Dont know if this explains things, but I turned off the EVO and removed the battery, Turned on the incognito, and tried to access the web, and a web page comes up saying that I havnt payed the bill... and gives me options to do so...!!! WTF? the 50 dollars was added 4 days ago when i activated the phone lol... any thoughts on this and if it could be whats causing the EVO to time out?
Im going to call boost now to see whats up with that web page on the incognito. will follow up
Prepaid carriers have terrible data transfer speeds without an excellent signal.
OK got it working.
didnt realize the cdma workshop wasnt writting nv files. well it was but it seams you cant load the individual 466, 465, 1192, 1194 without errors because the format is wrong. I didnt catch the error because its the error message looks the same as successful message. so what I did was Read the entire nv file 0000-1174 i believe and deleted the 465, 466, 1192,1194 and copied and pasted them back in from the saved donor nv's. also make sure it successfully wrote NAI's ... the [email protected]..... as well as your boost NAI. mine was successfully written but reverted back upon restarting the phone and failed profile updates. also on my evo in order to connect to modem i had to enable tethering and when thats done i would get an error saying that I am not authorized to to use sprint hotspot and it would automatically disable all data... so what i did was turn on the handset and enable airplane mode whenever i had the phone plugged in to the pc. anyways once i had the correct nv files written i restarted phone waited for handsfree...cancelled PRL update...waited for phone to show 3g...restarted phone, i then skips hands free activation and goes into PRL update, allow it to continue and then viola it worked...
getting 900-1400 kbps down and around 300kbps up with about 3 bars
voicemail notification doesnt work like it used to on sprint but i get texts and what not...
too bad it so expensive to purchase DFS cdma tools. the whole process could be completed with no need for multiple programs.
do you have any update on the voicemail notification ?
---------- Post added at 09:12 PM ---------- Previous post was at 09:05 PM ----------
also are you sure the NVM Items 1193 and 1194 are correct... in my NV i do have 465 and 466 but not the other 2
thx
this helped me
so, i was with cricket using an evo 4g.
I flashed the phone, (also 3 droids x2, and a thunderbolt for different people, btw friends and family).
Right now Im working on a area where cricket hardly covers.
I found out on ebay about the verizon prepaid unlimited... saw the videos... I thought i could do it, but my months with cricket was up and couldnt bear it anymore.
I contacted a local guy and .. i had to pay for the verizon flash. Being out of time and working long hours didnt give a chance to find out by myself.
(actually somehow i messed with the phone and i ended up roaming all the time, and when i asked that guy for the prl (wich i found out to be straightalk) he female doged me a lot, after several messages of being nice to him and convincing him that i simply needed a few kb file, he sent it, and I got it back to regular speed)
(he also didnt set me up with mms, i came here until i finally got it)
Anyways I'm really happy with verizon , it's really fast , 20mb in less than 2 minutes!!!, wow!!,,, BUT the evo its pretty messed up, and I got in my hands an S2 from sprint.
Now I simply want to take the info off the evo and put it into the galaxy s2,
But the only problem that i see ,is that the EVO does not have a DMU key file!!!
I checked in dfs and qpst
And i always check, double check, google and hours and days go by until i ask for help.So i honestly dont wan to pay him again, to connect a phone and copy paste the settings, and as i mentioned before hes not that savy, he couldnt enter diag mode in my evo, because i had go dial, and he freaked and installed another rom, see what i mean???? he couldnt get into diag mode!
So I doubt this guy has everything organized and pretty to have files and info for the phone he does, but even if he is, i dont even want to see him.
So another question is, how is the evo working in vz without a dmu key file?
thanks in advance, and please only respond useful stuff, if youre going to say idk...", why dont you talk to the guy..", just save your thoughts (i hope this doesnt sound mean but, man!, the people you find in forums can really give you headaches)
It looks like your are going to need a reflash with another or the same donor. Contact your flasher about it
roketteere said:
It looks like your are going to need a reflash with another or the same donor. Contact your flasher about it
Click to expand...
Click to collapse
the basic phone is the donor?
If so, what do you call the vz smartphone?
Can i use a sch i100 verizon phone for the flash process,?
i saw on the myverizon webpage an option to change device, it simply asks you for a new meid, i simply get a new meid and flash it.to a 3g verizon, right?
Fashed galaxy s 2 without DMU key!!
So , I ordered a cheap 3g vz phone. It's gonna take some time to arrive, so I decided to pre-flash the s2.
I started with DFS doing the meid, data and user profiles.
I found out I had voice n text .
then tried messing with the setting on the phone tru data menu , no go, tried apnbackup , it was not possible either.
looking at my evo settings in DFs, reading and re-reading the guide, I noticed in DFS where you put the AAA and HA passwords below there are two DMU value boxes, and the evo pictures had some numbers on it.
so i re-reflashed the phone doing the nv items file, couple of OTA programming and setting the profiles in qpst again until i got 1x data speed,
so i re-did everything over and over and this last time I click in DFS , THE WRITE CURRENT PROFILE SETTINGS button, in the two profiles and entered the DMu values over and over.
And it worked, but before that i was on rooted xx13 rom and then upgraded ota, but it messed up the flash, so before flashing for the last time, i simply wiped everything and installed latest rom rooted.
I got decent speeds and mms is solved by using go sms, (theres 2 places where you put the vzw address) and trying to go into the data menu on the phone didnt work. And for you tube I did the 0.0.0.0 trick, but it doesnt show the zeroes, only the sprint proxies. but youtube works regardless.
I hope this post helps somebody.