Hi
I intend to purchase those GPS map navigation software.
Do I need to purchase anything else?
Which gps navigation maps are you referring to, there are many different options, if you want just maps then you need nothing more, however if you want navigation guidance and your position on screen then you will need a gps system as well.
Those that can help you to navigate the road type.
Just found out that I might need to get a GPS reciever. It is true?
Which type is the best for our phone?
Lazibone,
If you have a maping software but do not have a gps hardware then you can use the map to get directions, search for plances, intersections and such. A GPS hardware would tell you your position on the map continuously and will guide you on the road through visual and voice prompts. a stand alone map without a GPS is useful but you have to find out where you are. I use mapopolis platinum without gps in the united states and it works great. I can get point to point detailed directions, search for places, intersections, points of interests, bottom line: I am never lost. If you want a gps hardware for your XDA II you have two options: wired mouse gps and bluetooth. Beware that Bluetooth gps are being reported to have serious problems with the XDA II bluetooth and most of them do not funcion on the XDA II. as a wired GPS well, I think they work fine. I suggest you go to www.pocketgps.com or visit some of the threads on this forum that disscussed gps systems soroughly.
Hope that helps.
Bohs
Thank!
if i have htc universal w/ tomtom 6.0.10 on it & it works great....but I dont want to always connect to the BT GPS receiver....I just want to use it kinda like a typical here to there map but w/out the instant GPS updates & locations & stuff....how can I turn it off?
if i just leave the BT gps out of range, TT6 won't work...it continually trys to searc for my device....
any advice would be great.
thanks,
GMP
I guess you are out of luck. The program simply wasn't designed to be used in that way.
thats ok....i just thought in the website info it was saying u could use it in a non-gps way......& i just couldn't figure out how.
so thanks for the reply,
gmp
I'm not sure about TT6, I'm still using TT5.
I use TT5 that way sometimes by going into the menu (just tap the screen)
then select the next arrow to browse the page.(i'm using a Dutch version, so I have to translate the best I can).
Then I select view map, top right option. I'm then presented with a map view on which I can zoom in/out and scroll. Als you can set waypoint or search streets by selecting the magnifying glass.
Hi,
Don't connect your bt gps like another bt gps but like a wired gps with right port com. And TT doesn't manage your bt anymore...
HD2 has built in GPS antenna which is great to use in most cases, but not in every case. Some time, while in the car for example, I would rather use external bluetooth GPS device. I know this is possible to use external GPS antenna and even set it up on my device for TomTom . However it was not a one click solution, plus, I do not remember exactly what I have done and how to reverse it... As a result, my TomTom only works with external BT GPS antenna (can't make it to use internal one) and NaviComputer uses internal GPS antenna (can't make it to use external one).
What I am looking for is an easy selector for GPS device. It would have several options:
1. Internal GPS
2. External BT GPS 1
3. External BT GPS 2
4. ... if needed
and more if needed. User could with one click of the button tell WM device what device to use for all apps that need GPS. Furthermore, if I select external BT GPS device, it could also automatically enable BT on the phone, which is normally disabled to save battery.
Is it possible? Or am I wishing too much?
I don't know if there is a unversal solution. I think all apps that use gps default to the gps module in the phone.
as for tomtom, go to Change Preferences > Configure GPS > Configure and then you can choose which module to use.
Hope that helps.
I went through some steps to enable external GPS for NaviComputer:
http://navicomputer.com/blog/?p=14
After those settings, my internal GPS is no longer working in TomTom. I have, of course, tried to go to Preferences > Configure GPS > Configure and chose built in GPS but that didn't help.
Anyway, I think I could spend some time reversing what I have done in the first place and get TomTom to use internal GPS again, but that is not the point. What I would like to have is an easy Switch On/Off button for External GPS, so that I would never need to remember all those setting changes and be able to do it with a click of the button....
You could try GPSGate (http://gpsgate.com/products/gpsgate_client), it's not free but you can set all your programs to use the GPS gate port then use GPS gate to switch between your BT/Internal GPS in one "bulk setting". Then you only need to change one program each time and all your nav programs will be updated.
Hope that makes sense...
Dave
sounds good, will try that
* This involves setting up connection via bluetooth to external GPS sensor. If you already know about this, just skip this post. No flaming needed
If not and still frustrate with GPS accuracy with all the latest ROMs, then read on.
I'm just posting so late researcher and newbies are aware of this quick and easy option too instead of the soldering or other alteration that involves open up the physical device. I've been using it for almost 2 years but did not have time to read around much so did not know about this option until recently. I'm slow...I know...lol
Recently, I've been researching for better solid GPS solution and how to cut down battery drain on ICS & JellyBean and ran into a video that involve using external bluetooth. (I did tried the Corrected GPS hardware fix, didn't really help...)
Anyway, I found several external sensors out there, but the ones that are cheap and small are $12 TomTom MKII or $25 Globesat BT-368i at ebay/amazon.
I thought globesat has more capability and longer rechargeable battery life (10+) so I got the Globesat. But MKii probably will do just fine.
Vibrant built-in GPS sensor works great for Froyo, but so-so or OK for GB, ICS, JB, CM7, CM9, or CM10.
When the built-in works, it has all kind of restriction such as does not work after CPU goes into deep sleep or you must do full lock immediately after reboot and before deep sleep & cannot toggle the gps off again.
So any solution that work ON/OFF on demand that is locks quickly with accuracy of within 30ft is perfect to me. You need accuracy of 30 ft or less or else google map or some other program will jump around on locking where you are and give false/wierd direction.
Fortunately, the option of using external GPS sensor via bluetooth is available in most Android and does the job well. I use GPS almost daily to check if there is traffic jam or other quicker alternative detour so the external bluetooth is always available in my car is perfect.
Not only that, it can save your battery too.
I gained about 5 hrs of battery time with Wifi & GPS off most of the time. I get even more battery time when I put the phone on Airplane mode and use GPS exclusively via bluetooth - meaning only bluetooth enable. I don't know how to explain it but I noticed it does. I guess the external sensor does most of the work and just relay minimal data to it and built-in radio/wifi/gps not running so it saves ton of battery.
So far, the coolest thing that worked now is I got more battery out of the phone under ICS or JellyBean ROM (not using built-in gps with wifi off) under Airplane mode and offline turn-by-turn navigation (google maps & Sygic) that still work with external sensor via bluetooth. In essence, that is like having the traditional garmin or tomtom gps anywhere you go as long as you have map available stored locally on your phone (aka offline). Sygic allows you to buy entire US map or the world and put it on your phone for offline navigation. Google maps allow only 6 offline map where each map is around 70-82mb or less. I got entire Orange county in my offline map and can use external gps to pinpoint where i am. The only sucky thing with google maps is you have to get the turn by turn navigation first then you can toggle gps off. Sygic does not rely on built-in gps enable in order for it to work. This is all great the next time I go to Yellowstone National park, since cell signal there sucks for T-mobile. With the external gps, you can put it on your hat and go hiking and still get gps to work wether you use online or offline Google maps, Sygic, Locus, or Orux....
To get your device able to use external GPS sensor via bluetooth, all you have to do is:
1) buy the bluetooth GPS sensor
2) download & install Bluetooth GPS app on android market ( https://play.google.com/store/apps/details?id=googoo.android.btgps&hl=en ) by Googoo Android
3) run it, checkmarked "Enable Mock GPS Provider", click Connect
4) go to device Settings, checkmarked "allow mock locations" or equivalent.
5) that's all...use any map software online or offline kind.
The lock I got with this is within 1 second and accuracy of around 6-15ft (on globalsat BT-368i)
You can use this device during hiking to save your cell battery.
You can also use it with mac, pc, windows phone, laptop, tablets that do not have gps sensor built-in with it...all for $12-25...worth it
WHILE DRIVING w/ ext BT GPS configued as Source GPS on CM10 Preview w/ ext bt option...11 out of 12 birds locked and accuracy down to 11ft...
The moment you turn on, it can lock 6+ satellites almost immediately
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EVEN ON AIRPLANE MODE (where almost everything is shutdown including DATA except for GPS & BT), it still saw 10 out of 12 birds with similar locking and was still able to navigate w/ ext bt gps
Navigation turn by turn under AIRPLANE mode
inaccurate signal for car navigation
kobesabi said:
* This involves setting up connection via bluetooth to external GPS sensor. If you already know about this, just skip this post. No flaming needed
If not and still frustrate with GPS accuracy with all the latest ROMs, then read on.
I'm just posting so late researcher and newbies are aware of this quick and easy option too instead of the soldering or other alteration that involves open up the physical device. I've been using it for almost 2 years but did not have time to read around much so did not know about this option until recently. I'm slow...I know...lol
Recently, I've been researching for better solid GPS solution and how to cut down battery drain on ICS & JellyBean and ran into a video that involve using external bluetooth. (I did tried the Corrected GPS hardware fix, didn't really help...)
Anyway, I found several external sensors out there, but the ones that are cheap and small are $12 TomTom MKII or $25 Globesat BT-368i at ebay/amazon.
I thought globesat has more capability and longer rechargeable battery life (10+) so I got the Globesat. But MKii probably will do just fine.
Vibrant built-in GPS sensor works great for Froyo, but so-so or OK for GB, ICS, JB, CM7, CM9, or CM10.
When the built-in works, it has all kind of restriction such as does not work after CPU goes into deep sleep or you must do full lock immediately after reboot and before deep sleep & cannot toggle the gps off again.
So any solution that work ON/OFF on demand that is locks quickly with accuracy of within 30ft is perfect to me. You need accuracy of 30 ft or less or else google map or some other program will jump around on locking where you are and give false/wierd direction.
Fortunately, the option of using external GPS sensor via bluetooth is available in most Android and does the job well. I use GPS almost daily to check if there is traffic jam or other quicker alternative detour so the external bluetooth is always available in my car is perfect.
Not only that, it can save your battery too.
I gained about 5 hrs of battery time with Wifi & GPS off most of the time. I get even more battery time when I put the phone on Airplane mode and use GPS exclusively via bluetooth - meaning only bluetooth enable. I don't know how to explain it but I noticed it does. I guess the external sensor does most of the work and just relay minimal data to it and built-in radio/wifi/gps not running so it saves ton of battery.
So far, the coolest thing that worked now is I got more battery out of the phone under ICS or JellyBean ROM (not using built-in gps with wifi off) under Airplane mode and offline turn-by-turn navigation (google maps & Sygic) that still work with external sensor via bluetooth. In essence, that is like having the traditional garmin or tomtom gps anywhere you go as long as you have map available stored locally on your phone (aka offline). Sygic allows you to buy entire US map or the world and put it on your phone for offline navigation. Google maps allow only 6 offline map where each map is around 70-82mb or less. I got entire Orange county in my offline map and can use external gps to pinpoint where i am. The only sucky thing with google maps is you have to get the turn by turn navigation first then you can toggle gps off. Sygic does not rely on built-in gps enable in order for it to work. This is all great the next time I go to Yellowstone National park, since cell signal there sucks for T-mobile. With the external gps, you can put it on your hat and go hiking and still get gps to work wether you use online or offline Google maps, Sygic, Locus, or Orux....
To get your device able to use external GPS sensor via bluetooth, all you have to do is
1) buy the bluetooth GPS sensor
2) download & install Bluetooth GPS app on android market by Googoo Android
3) run it, checkmarked "Enable Mock GPS Provider", click Connect
4) go to device Settings, checkmarked "allow mock locations" or equivalent.
5) that's all...use any map software online or offline kind.
The lock I got with this is within 1 second and accuracy of around 6-15ft (on globalsat BT-368i)
You can use this device during hiking to save your cell battery.
You can also use it with mac, pc, windows phone, laptop, tablets that do not have gps sensor built-in with it...all for $12-25...worth it
Click to expand...
Click to collapse
Hello everybody,
I have an Ainol Novo 7 Fire Tablet with the feiyu 1031 rom , and I just installed Sygic Maps on it yesterday, I also downloaded the bluetooth gps app by googoo android and when I connected my external bluetooth gps ,I got a lock on my position within seconds. My problem is that when I open Sygic maps, I get the error " Inaccurate Signal for Car Navigation" even though the bluetooth gps app shows me all the available satellites , I have enabled mock location in my setting also but still have no luck in sygic catching the gps signal
Any help or advice would be sincerely appreciated
Thanks
Prakash
praks_khemlani said:
Hello everybody,
I have an Ainol Novo 7 Fire Tablet with the feiyu 1031 rom , and I just installed Sygic Maps on it yesterday, I also downloaded the bluetooth gps app by googoo android and when I connected my external bluetooth gps ,I got a lock on my position within seconds. My problem is that when I open Sygic maps, I get the error " Inaccurate Signal for Car Navigation" even though the bluetooth gps app shows me all the available satellites , I have enabled mock location in my setting also but still have no luck in sygic catching the gps signal
Any help or advice would be sincerely appreciated
Thanks
Prakash
Click to expand...
Click to collapse
@prakash, i have ainol novo 7 fire tab with 4.0.4 version i would suggest you to install gps test and see if the app on your tab show the gps status as On in green color and also shows the gps coordinates. one thing i had to do with my tab is downloaded build prop editor app from appstore and edit the gps.enable propery from false to true (requires root access, and my ainol tab had default root access).
remember the ainol tab does not have a build in gps chip which is why you need to turn the above prop to true.
i am successfully using the below combination for my my ainol fire tab
nokia phone with built in gps. using extgp app from nokia to transmit gps coordinates over bluetooth. on my tab using gps bluetooth mouse and i now have gps location shown on google maps, navigator etc.
hope this helps.
venky4rhyme said:
@prakash, i have ainol novo 7 fire tab with 4.0.4 version i would suggest you to install gps test and see if the app on your tab show the gps status as On in green color and also shows the gps coordinates. one thing i had to do with my tab is downloaded build prop editor app from appstore and edit the gps.enable propery from false to true (requires root access, and my ainol tab had default root access).
remember the ainol tab does not have a build in gps chip which is why you need to turn the above prop to true.
i am successfully using the below combination for my my ainol fire tab
nokia phone with built in gps. using extgp app from nokia to transmit gps coordinates over bluetooth. on my tab using gps bluetooth mouse and i now have gps location shown on google maps, navigator etc.
hope this helps.
Click to expand...
Click to collapse
I have the same tablet with the same firmware and...
thanks for your answer! It works
AW: GPS alternative fix for android, mac, pc, phones, laptop tablets via bluetooth gp
Where do you get the globesat so cheap?
Sent from my SGH-T959 using xda app-developers app
I'll have to give this a try and get back to you on the results. Thanks!
testomat said:
Where do you get the globesat so cheap?
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Ditto. I would like to know this as well. I'm seeing the 368i for about $60 and the mkii for about $25.
smithmal
Test
test
---------- Post added at 10:17 AM ---------- Previous post was at 10:01 AM ----------
venky4rhyme said:
@prakash, i have ainol novo 7 fire tab with 4.0.4 version i would suggest you to install gps test and see if the app on your tab show the gps status as On in green color and also shows the gps coordinates. one thing i had to do with my tab is downloaded build prop editor app from appstore and edit the gps.enable propery from false to true (requires root access, and my ainol tab had default root access).
remember the ainol tab does not have a build in gps chip which is why you need to turn the above prop to true.
i am successfully using the below combination for my my ainol fire tab
nokia phone with built in gps. using extgp app from nokia to transmit gps coordinates over bluetooth. on my tab using gps bluetooth mouse and i now have gps location shown on google maps, navigator etc.
hope this helps.
Click to expand...
Click to collapse
Hi Everyone
Thanks for all the great info.
I have a Novo8 Discover with 4.1.1 trying to connect to a Samsun Captivate via bluetooth. I have tried all the fixes above except couldn`t find gps enable property so i changed gpswithwifi from 1 to 0. This allowed GPS Mouse to show connected but says unable to compute gps data. Also have GPS NMEA Sender installed on phone but on trying to connect says java.io IOError. Seems that I am close but am still doing something wrong. I have tried all sorts of things and spent a lot of time on this.
Any help with this problem would be greatly appreciated.
Thank you and best regards,
Robin
I use a Nokia LD3W with my Vibrant and it works fantastic. I use it while racing my motorcycle and the data refresh rate is so much higher and accurate than the internal, it works excellent.
Thanks for the reply.
My Discover doesn't have internal GPS so there is a bit of trickery involved to make it work. How is your battery life?
Truth is I bought the wrong tablet for my intended application. The company I bought it from said it had GPS and I took their word for it.
Haven't had time to mess with it lately but will keep you posted when I do get it running.
Regards
Robin
GPS problems
Hi everyone,
I realize the I don't have the time or skill to make this work.
I have an External GSP model BU-353 w/USB. I have ordered a female USB to male Micro USB.
I hope to make this work on my Novo8 Discover.
First, is it possible to make this into an accurate, reliable GPS?
Second, how much would it cost to have some pro help to make this work?
Thank you and regards,
Robin
Apologies if this has been asked before, but I have a Android joying headunit and having an issue in regards to satnav. Now I use Google maps and I can set a destination and the app knows my current location but once I'm driving the satnav app doesn't update my location (it still registers me at the initial starting location).
At first I thought could it be a GPS issue, but GPS always seems to know my current location once I start any app that needs my location, the problem only happens once I'm on the move it doesn't update it on the app. So baffled whether its a GPS issue or app issue?
Has anyone had a similar issue or know if a possible resolve?
1-) how many satellites do you see ?
2-) how much takes to the gps to make the "fix position" and with how many satellites ?
If you don't know the answers to the questions, let's do in another mode.
Head Unit connected to the internet (wifi)-> Google Play Store -> apk GPS TEST (download and install)-put in on the gps antenna of the device;
Now open GPS TEST->Settings->AGPS-> "clear and update".
RESTART the hu( not closed and open, RESTART), open GPS TEST and wait; first you'll see 2-3 satellites, but slowly the increase till 20-25 and do the "fix position" with 10-12 satellites.
This operation take about 10-15 minutes, after your radio "catch" the satellitesin 10 seconds.
@nick1964 Thats not the issue, the issue he's describing is totally different. The unit will catch GPS signals and navigation works totally fine with other third party apps (iGo, Sygic, Navigon, etc), but Google Maps has an issue where it will catch your location initially, but once you start navigating it will not update the location in the app. If you switch over to another GPS app or even check the GPS in the SYU settings app, it has full lock. So your troubleshooting steps dont really apply in this case. It's happened to me too, it just randomly started working after some days. I don't mainly use Google Maps so I can't really tell what fixed it.
gamer765 said:
@nick1964 The unit will catch GPS signals and navigation works totally fine with other third party apps (iGo, Sygic, Navigon, etc), but Google Maps has an issue.
Click to expand...
Click to collapse
@gamer765 I have only tested with Google maps, I'll give iGo a try shortly.
If he didn't know what level of satellites signal have, how many satellites see, how do you talk about "that is not an issue"?
Do you know what is GSM triangulation?
Do you understand what is navigation offline and online?
Do you know what is AGPS data and for what is used ?
Hi all I have an update, it seems to be the GPS thats the issue (NOT the apps that use GPS).
Initially I thought it was the GPS only worked at the initial moment when using a app that uses GPS to get my location, but at all the times this happened I was connected using my mobile phones data connection for Internet. I checked the GPS info and its says "no signal" (but the GPS is 100% connected to the headunit, please see attached photo).
Any ideas anyone?
I have this same problem in my new Joying Android 10 HU as well.