Bell 2.2 Stock firmware - Galaxy S I9000 General

Hi, I was wondering if someone had the new 2.2 UGJK3 from bell for download. I've seen in the post of stock firmware a UGJK3 but it was under the section USA and was from november. What im looking for is the new bell UGJK3.
Thanks

the new bell rom is JL2 not JK3... which is a few months old i believe...there is a guide and attached files here in the general section with both

Related

Stock Bell 2.1 Rom

Hey Guys,
Does anyone have a link to a flashable bell vibrant ODIN version?
Thanks!
My friend in canada messed up his phone by flashing some euro rom and we cant find the orig rom anyplace.
Thanks!
If this is useful at all, the stock bell 2.2 is in my dropbox: direct link to .tar, this one worked for me very well when I had to recover my 2.2
http://www.samfirmware.com/
latest bell is JL2
realityiswhere said:
If this is useful at all, the stock bell 2.2 is in my dropbox: direct link to .tar, this one worked for me very well when I had to recover my 2.2
Click to expand...
Click to collapse
Don't use this file it's JK4

Flashed i9000 firmware onto i9000m - Please help

Hello All,
It seems Ive flashed the wrong firmware on my i9000m, the 3 button download mode stopped worked but I got a USB jig & now I can get back into download mode.
I re-partitioned & flashed all three PDA, Modem & CSC in Odin.
Before I try again i was wondering if anyone could point me in the direction of the files I need, preferably files that wouldn't cause Samsung to question the validity of my warranty if I have to send it back in.
Any help would be appreciated, thank you.
http://forum.xda-developers.com/showthread.php?t=846913
here is the stock firmware list
Does anyone know what the original firmware code is for an i9000m from bell in Canada?
JL2 is that latest official Bell i9000m firmware.
This is the JL2 ROM I got from Kies when it updated my phone.
JL2

Optus GT-P1000 Stcck Firmware ROM

Hi,
Would anyone be able to upload the stock rom included on out-of-the-box Optus GT-P1000's? If not, are there any copies of Telstra's GT-P1000T ROM anywhere?
Thanks heaps!
--agc93
Do a search for "telstra rom galaxy tab"... Not original as it is a rotohammer backup but it is telstra stock rom... Its also pre-rooted...
ultramag69 said:
Do a search for "telstra rom galaxy tab"... Not original as it is a rotohammer backup but it is telstra stock rom... Its also pre-rooted...
Click to expand...
Click to collapse
Thanks for the quick reply. Do you think there's any chance I'm going to find the fully stock ROM as opposed to a pre-rooted Roto build? Or the Optus ROM?
Not for the Telstra rom... Optus were, apparently, testing a gingerbread rom for gtab however when that is released is anyone's guess... Vodafone was also supposed to be releasing a gingerbread stock rom however this also has faded into history...
I spoke to optus and Samsung today re Gingerbread on the P1000. Optus had no comment other than to say they would pass my request to management. The guy from Samsung seemed annoyed with Optus for sitting on the firmware update for so long.
Optus CSC
Been searching both XDA and Whirlpool Forums for an answer to this but does anyone have a copy of the Optus CSC file for flashing through Odin.
Thanks
bubbdamadaussie said:
Been searching both XDA and Whirlpool Forums for an answer to this but does anyone have a copy of the Optus CSC file for flashing through Odin.
Thanks
Click to expand...
Click to collapse
I've been looking for the same thing for a while.
I'm not sure of your situation, but I would say that a CSC file is probably not absolutely critical. A CSC file only deals with region-specific settings. As long as you enter the APNs manually to get your 3G working (check out AusDroid for your APN) you should be alright. It's possible you might have problems with Optus's included apps, but they're not all that great anyway..
I take no responsibility for anything you try, but I've done quite a few flashes without CSCs and I haven't bricked yet. Your mileage may vary.
Problem is I flashed to overcome before I realised I needed to backup my original firmware.
What I am trying to do is return it back to Froyo 2.2.1 but I can't remember what version of the firmware it was.
I have downloaded firmware from samfirmware but I cant get Kies to update my firmware it just says my version is not updatable through Kies.
Hence why I am looking for the Optus CSC.
I too would like to update to the stock, Optus firmware (even the old one would be fine)
Got a reply from Optus support yesterday and they said they had "no information" on the Tab's Gingerbread update "at this time". They announced in April that the Galaxy S and Tab updates were being tested, and the S has had its update for months, but the Tab's still got nothing.
agc93 said:
Hi,
Would anyone be able to upload the stock rom included on out-of-the-box Optus GT-P1000's? If not, are there any copies of Telstra's GT-P1000T ROM anywhere?
Thanks heaps!
--agc93
Click to expand...
Click to collapse
CheckFus Downloader will allow you to download any rom you choose for your device.
Ive used it on my Galaxy I9000 and I9100 and it works perfectly.
It downloads encrypted kies roms, and decrypts them for you, ready to flash with odin.
Ive downloaded both the telstra and optus roms, but as yet im unable to flash them. Currently have Overcome 4.1.0 on my GT P1000 and for some reason, it stops while flashing the Hidden partition. Have tried repartitioning, and using different pit files, but no success as yet.
At least check fus will get you the current rom for your device, which kies will be able to update once again, verifying its a stock genuine rom.
Check Fus Downloader Website
Hope this helps you out.

[Q] Hi problem debranding

Hi
New member here and could do with some help
I unlocked my 02 UK GT-i9505 no problems
I thought I had found an official rom unbranded 4.2.2 thru ibtimes as with my other phones to flash with odin onto the phone- full wipe no problem and downloaded @ 1.5 gb!!
H3G-I9505XXUBMEA-20130601113653
I have limited data on my plan and when the rom booted to my delight it was branded 3 network lol aghh
Could anyone help me with a 4.2.2 rom link, official Samsung rom generic unbranded for the GT-i9505 that they know for a fact works.
I am nearly out of data this month and can not take the risk on another mistake
Cheers
magletti said:
Hi
New member here and could do with some help
I unlocked my 02 UK GT-i9505 no problems
I thought I had found an official rom unbranded 4.2.2 thru ibtimes as with my other phones to flash with odin onto the phone- full wipe no problem and downloaded @ 1.5 gb!!
H3G-I9505XXUBMEA-20130601113653
I have limited data on my plan and when the rom booted to my delight it was branded 3 network lol aghh
Could anyone help me with a 4.2.2 rom link, official Samsung rom generic unbranded for the GT-i9505 that they know for a fact works.
I am nearly out of data this month and can not take the risk on another mistake
Cheers
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2265477
choose any new firmware for your variant
Thanks
samersh72 said:
http://forum.xda-developers.com/showthread.php?t=2265477
choose any new firmware for your variant
Click to expand...
Click to collapse
Thanks I have managed to locate the firmware now.
I think I was just unlucky getting the 3 branded one by mistake
Hopefully no more Noob questions off me!!

Going back to stock Australian Vodafone Lollipop rom

Hi everyone.
I spent the last few days trawling the internet and mucking around with pit magic to go back from a leaked Lollipop ROM back to the stock Vodafone Australia Lollipop rom. Everytime I flashed any Australian Lollipop ROM, an error popped up advising the HIDDEN image was too large for the partition. I ended up at this post and tried out each relevant looking PIT file. Eventually I found that this PIT was the right one for my Australian Vodafone branded Note 3.
Hope this helps someone else with the same problem I had!

Categories

Resources