model:
htc hd2 512 ROM
PB81100 Hx-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x20
tr radio 2.14 and 2.15
Energy Rom
gaunner say: Wait for my updated version. You probably have trouble with the undervolt included in the current ROM. ETA 30 mins..
Not sure if this'll help, and I'm not even sure what it means but mine is:
Model: HTC HD2 512 ROM
PB81100 Hx-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
With Radio Version: 2.15, and previous ROM: Artemis 48.1
I've been able to get past the gogogo screen.
I don't know what the 0x30 difference means.
MAGLDR v1.11 released fixes this problem - See MAGLDR thread.
Thread closed.
Related
So hi there,
im about to flash my HD2.
These are my Bootloader information:
Bootloader
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And these are my Software information:
OS: 5.2.21864 (21864.5.0.81)
ManillaVers 2.5.19202525.0
ROMVers: 1.43.111.2 (70315) GER
ROM date 10/28/09
As i figured out, my SPL Version is correct.
So i will HSPL it (better than SSPL, ya??)
I just want a normal version (not-branded by any provider) in german.
so which rom could be prefered?
another question:
if i send my hd2 for warranty back, has it to be 100% the same rom as before?
or can i just install a carriers rom and remove hspl?
Nyte. said:
So hi there,
im about to flash my HD2.
These are my Bootloader information:
Bootloader
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And these are my Software information:
OS: 5.2.21864 (21864.5.0.81)
ManillaVers 2.5.19202525.0
ROMVers: 1.43.111.2 (70315) GER
ROM date 10/28/09
As i figured out, my SPL Version is correct.
So i will HSPL it (better than SSPL, ya??)
I just want a normal version (not-branded by any provider) in german.
so which rom could be prefered?
another question:
if i send my hd2 for warranty back, has it to be 100% the same rom as before?
or can i just install a carriers rom and remove hspl?
Click to expand...
Click to collapse
you can flash hspl2 1.66 and then i suggest you flash artemis ger v8. if you have to send your device back to htc you can flash it with the 1.48 ger from here. good luck and happy flashing m8!
any pro/con about flashing via usb oder sd card?
Nyte. said:
any pro/con about flashing via usb oder sd card?
Click to expand...
Click to collapse
Before hspl2, flashing the wrong stock rom via sd card would have erased hspl and gotten you stuck on the wrong spl version with no way back and as such was discouraged. I believe with hspl2 this problem has been removed so there's no real difference. Some say sd card is safer as you can't accidentally knock out the usb cable during the flash, or if there's a power failure etc, but I've never had a problem recovering even with a power failure in the middle of a flash.
flashing succeded =)
tx for help
hello,
I need somme help too.. because i've got the same telephone version as you.
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And i can't Use HSPL, HSPL 2 and HSPL_1024_RUN
i' have always the same error code !
djoe069 said:
hello,
I need somme help too.. because i've got the same telephone version as you.
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And i can't Use HSPL, HSPL 2 and HSPL_1024_RUN
i' have always the same error code !
Click to expand...
Click to collapse
HSPL and HSPL2 should work. Don't use HSPL_1024 as that's only for the US TMo device.
What error message do you get?
i think i bricked my hd2 ...ofcourse not reading thread correctly. my screen is stuck on Stick Together screen.... help
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0X05
MicroP(Touch) 0x40
otel800 said:
i think i bricked my hd2 ...ofcourse not reading thread correctly. my screen is stuck on Stick Together screen.... help
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0X05
MicroP(Touch) 0x40
Click to expand...
Click to collapse
More details will be needed for anyone to help you...exactly what were you doing or just did? If you were flashing a ROM, where in the process and what elements and steps were you using?
ROM, Radio???
HSPL won't work... you on a new model PB81120
is this ok send back to htc?
PB81100 HX-BC
SPL-1.42.0000 XE
MICROP(LED) 0X05
MICROP(TOUCH) OX5
OS origanal windows 6.5
RADIO 2.06.51.07
send back to htc???????????
Yip, I sent mine back with HSPL on it and they still fixed it under warranty
Sir,
I have HTC HD2 hang on HTC logo. When we press - Volume + power button it shows:
PB8100 HX-BX
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X40
I tried it to hard reset, but same. No use of hard reset.
Please reply thank you.
Firstly...i believe u try to flash it to android rom
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio
2. YOU NEED HARDSPL 2.08 INSTALLED ON YOUR DEVICE TO FLASH MAGLDR
3. MAGLDR 1.13 package
For greater explaination...please read completely without skip any step from this tred
http://forum.xda-developers.com/showthread.php?t=893948
Did you try to update your phone????
Sent from my HTC HD2 using XDA App
task29, wipe all cashes & use more stable ROM
i have hd2 hang at HTC logo without progress bar under.
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
how can repair it?
In my device (android) the Bootloader is standing:
PB81*** HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Some people said that is Hynix device or something like that
So anybody can explain me what is the different between these
because some android kernel (dorimanx 6.0 and above) can boot on my device, it stucks at go go go screen
Pls help me
Tks in adv