Something happened when flashing now it only boots into voodoo recovery and clockwork recovery. I cant restore or wipe and flash a new rom it only boots into recovery even when you pull battery and try a normal boot.
now its booting to stock recovery but says E:can't mount /dev/block/st111 (invalid argument) please help tried everything cant get it to boot i had tried to install dj05 as instructed just got the fascinate 2 days ago used to the incredible.
Related
I flashed stock B136, then recovery screen showed up, like E: couldn't mount block 6 etc.
Then flashed B518, got pink screen, stuck bootanimation.Copied cwm 5.0.2.7. , went to recovery. wiped everything, but said couldn't mount /system. Then flashed again B518, stuck bootanimation again.But it is very slow like 2x.Now i have no idea what to do.
What can i do?
When did it say it can't mount /system?
Was it when you were formatting /system?
How about custom roms? Can you flash and use them?
rqmok said:
When did it say it can't mount /system?
Was it when you were formatting /system?
How about custom roms? Can you flash and use them?
Click to expand...
Click to collapse
First flashing stock B136 rom.After flash completed, automaticly went to recovery and said like : can't mount E : dev/block
Then flashed B518, copied 5.0.2.7 cwm in pink screen.Wiped everything, tried formatting system then i got the can't format system message
Can't use custom roms, because i want to sell it.But yes it flashed.
Hey Guys,
i have a big problem with my new S4 (i9505).
Ive rooted the Stockrom with Odin and then i flashed the Recovery, thats works well.
After this step ive tried to flash CM10.1.
The first boot works well, ive setup my phone, take a reboot and then i have a bootloop.
Ive go to the Recovery and i see that /data is destroyed.
Ive formating /data, flashed CM10.1 again, first boot works, second boot, /data is destroyed.
Then i flashed the prerooted XXUBF8-Firmware, flash the recovery, all works well. Then i flashed a alternative Kernel, my /data will be destroyed again. I have to format it, and to reflash the stock firmware.
My last try was to flash the minit-Framework. After this flash, i cant boot in my system, becaus my /data was destroyed.
I dont thought that my device is destroyed, because the Stock prerooted F8-Firmware (with custom recovery) works 2 weeks long without any problems (ive rebootet many times in the 2 weeks).
What i doing wrong?
And sorry for my bad english
Best regards
Just to follow you : what do you mean by "destroyed" ? Formatted partition ?
If so, try to do the following : flash stock ROM, then the recovery (I personally use Philz Touch based on CWM), do a factory wipe and then install the rom you want.
Hey,
thanks for answer.
When i have a bootloop and go to the recovery and want reflash a rom, the installer say: cannot mount /data, unknow partition. and then the setup breaks up.
After a format of the /data-Partition via Recovery, i can reflash the rom, and boot onetime.
Ive go "your way" and i have the some problem. After one Reboot my /data is destroyed.
Mmmm...in the Philz Touch recovery (based on ClockWorkMod but with a lot of improvements), there is an option called "wipe data for new rom install" or something similar... give it a try !
I will try it
Ive tried it with CWM / TWRP and have the same error.
But i will try it ) *flash*
Till later
androidnoobi said:
I will try it
Ive tried it with CWM / TWRP and have the same error.
But i will try it ) *flash*
Till later
Click to expand...
Click to collapse
Good luck ! As you can normally flash stock rom, you don't seem to have hardware issues so don't worry
omg Oo
I dont believ it -.-
All the trouble are only fail from CWM and TWRP??
Now with Philz it works perfectly.
Ive installed Bobcat, reboot, flashed minit, reboot, flash another Kernel, reboot .. and it works Oo
Great )
Thanks
So, yesterday I flashed stock 4.2.2 via LG Flash Tool 1.6 and everything went nice. After that I put SlimKat on SDCard i flashed it in CWM recovery. After flashing SlimKat I wanted to install StockMod so I put it on SDCard and try to flash it in CWM.
After flashing StockMod G2 automatically booted into CWM and when I wanted to flash back to SlimKat it said: "Unable to mount /SDCard!"
I tried to install TWRP recovery and tried to fix it trough the recovery, but it always said unable to mount sdcard. Finaly I got rid of that error by formatting all the partitions. After that I installed several via ADB Sideload, but every ROM "installs" and when I want to boot it goes into recovery again. So, I noticed that my /system partition is never mounted and I can't mount it.
Any help?
Hi guys. I'm having some weird problems with my Galaxy Note3. I tried installing custom rom, but i did something wrong, so now when i try to install a rom i get this "E: failed to mount /data (Invalid argument)".... What should i do? I got CWM Recovery V6.0.4.6, and i just tried to update it (unzip through CWM), but for some reason it won't let me open my sd card... What should i do? My phone has no rom right now.
Thanks.
EDIT:
I installed cwm 6.0.4.7, but i still have 6.0.4.6.... Weird?
Hi all,
So I recently made the mistake of rooting my Samsung Galaxy S7 Edge (SMG-935A) while being a complete and total novice. I was able to root it fine (using ODIN), and then I tried to use some customization apps which messed up my phone. I tried resetting my phone and flashing the ROM again, and it messed my phone up even more.
First thing's first, when I try to boot up my phone, it will not go past the Samsung Galaxy S7 Edge Custom screen. It will stay there pretty much until the phone dies.
When I boot it up in recovery mode, it gives me an error message that reads:
"dm-verity verification failed....
E:failed to mount /system (Invalid argument)."
When I try to wipe my phone's data and factory reset it, it throws this error:
"E:failed to mount /system (Invalid argument)
can't mount '/system', rc = '-1' (Invalid argument)."
I have not seen anything on how to fix this specifically. Is there a way to fix this error and get my phone working again that I am unaware of? Or am I better off just getting a new phone? Anything you can do to help would be great. I've tried flashing stock ROMs and everything to no avail.
Thanks in advance.
captainclutch96 said:
Hi all,
So I recently made the mistake of rooting my Samsung Galaxy S7 Edge (SMG-935A) while being a complete and total novice. I was able to root it fine (using ODIN), and then I tried to use some customization apps which messed up my phone. I tried resetting my phone and flashing the ROM again, and it messed my phone up even more.
First thing's first, when I try to boot up my phone, it will not go past the Samsung Galaxy S7 Edge Custom screen. It will stay there pretty much until the phone dies.
When I boot it up in recovery mode, it gives me an error message that reads:
"dm-verity verification failed....
E:failed to mount /system (Invalid argument)."
When I try to wipe my phone's data and factory reset it, it throws this error:
"E:failed to mount /system (Invalid argument)
can't mount '/system', rc = '-1' (Invalid argument)."
I have not seen anything on how to fix this specifically. Is there a way to fix this error and get my phone working again that I am unaware of? Or am I better off just getting a new phone? Anything you can do to help would be great. I've tried flashing stock ROMs and everything to no avail.
Thanks in advance.
Click to expand...
Click to collapse
You should be able to flash back to stock with Odin. If you aren't on current B4 bootloaders, you need to know that if you on B2 or B3 that flashing the B4 bootloaders, you cannot go back to the previous versions (you will brick). The current stock G935AUCS4API2 (BL4) found HERE should get you back up and running again.
kangi26 said:
You should be able to flash back to stock with Odin. If you aren't on current B4 bootloaders, you need to know that if you on B2 or B3 that flashing the B4 bootloaders, you cannot go back to the previous versions (you will brick). The current stock G935AUCS4API2 (BL4) found HERE should get you back up and running again.
Click to expand...
Click to collapse
Hi, thanks for the help. I tried using the files from the link you provided but I got a "Complete(Write) operation failed" error from ODIN. Also on my "Downloading" screen, I now have a "SW REV CHECK FAIL : [about]Fused 4 > Binary 2" error. Any insight on that?
Thanks.
Try using Samsung smart switch on your pc to re-initialize your phone. It should be able to recover your device and put you on the newest firmware.