I have an Omnia II, and i run TomTom on it.
i want to purchase a carkit, but i want the voice directions to be played via the carkit on the speakers of my car. And when the spoken direction is finished, to switch back to whatever was playing (on my CAR stereo that is)
so i don't want to stream EVERYTHING of my phone... the music must be played on my car stereo, but when tomtom wants to speak, it should do that on the car speakers.
how can i get this to work, whick carkit do i need?
(i was looking at the Parrot Carkit MKi9100)
Related
I am soon to buy the Magician in one of it's many forms. However noe thing i have been woundering is how am i am going to achieve the in-car setup i desire. Basically I need both a carkit (conversation through car stereo speakers etc) and i also want to run GPS navigation on the Magician. First of all is this possible? What happens if i am using the GPS and i recieve a call? Also what hardware are people using to achieve this as i assume i can't use both a bluetooth carkit and a bluetooth GPS reciever?! any hlp is greatly appreciated.
Thanks,
Tom
Hi Tom,
I've got an iMate Jam & recently installed a Parrot BTluetooth CK3300 GPS Car Kit into my 1999 RAV4. The installation was pretty straight forward for cars with ISO connection, simply put in the mic, GPS ant & control display, plug into the car harness & HiFi & off you go. The GPS part of the kit is simply & effective, I use Tom Tom Navigator 5 & it's pretty faultless, obtaining a fix in seconds. Here's the bad part, the call quality through the kit using the Jam is AWFUL. Making and receiving calls is accompanied by a loud, high pitched warbling sound which eventually subsides, but is replaced by so much interference that the call is unworkable. I know it's not the kit because my wife's SE T68i works flawlessly. Everything else about the setup works perfectly (pairing muting, upgrading via BT etc etc). This a MAJOR problem which I have sent on to Parrot & am waiting for a reply. I understand they are pretty good at customer enquiries and expect them to come back to me pretty soon. I'll post again when I hear something. Despite all the bad press the Jam gets I think it's the best one I've owned so far (I'm on my 5th) and with the right software is excellent, but the choice of car kit is essential, until these problems are ironed out I wouldn't recommend using the PDA with a BT carkit.
Apart from the poor audio, how does it work when you are being navigated by TomTom and you receive a call? Does TomTom stop talking to you? Does the display show who's calling and then go back to tomtom display etc?
Hi there,
I have a MDA compact with now the QTEK 1.12 ROM, I have a bluetooth GPS Fortuna Clip-on and a Mr Handsfree Genius Bluetooth Carkit and I love it.
As soon as I start my car, there is a bluetooth connection to the carkit and the sound quality is excellent. You can make a call without getting the MDA out of your pocket, just push the button. The only issue is voice dialing, but that is a common problem for the MDA.
Also it makes a bluetooth connection to the GPS and Tomtom works fine. The only minus is that Tomtom doesn't use the carkit speaker, but, since the speaker of the MDA is loud enough, that is no issue. There is no supply with this bluetooth carkit, so I bought a 12 --> 5 Volt converter for the MDA.
I really love this combination. The best thing, that happened to me.
Andre
Hi there,
I have a MDA compact with now the QTEK 1.12 ROM, I have a bluetooth GPS Fortuna Clip-on and a Mr Handsfree Genius Bluetooth Carkit and I love it.
As soon as I start my car, there is a bluetooth connection to the carkit and the sound quality is excellent. You can make a call without getting the MDA out of your pocket, just push the button. The only issue is voice dialing, but that is a common problem for the MDA.
Also it makes a bluetooth connection to the GPS and Tomtom works fine. The only minus is that Tomtom doesn't use the carkit speaker, but, since the speaker of the MDA is loud enough, that is no issue. There is no supply with this bluetooth carkit, so I bought a 12 --> 5 Volt converter for the MDA.
I really love this combination. The best thing, that happened to me.
Andre
so it is possible then to have two bluetooth connections running at the same time? ie. i can use a bluetooth GPS reciever such as the one that is supplied with tom tom and also use any bluetooth carkit at the same time? and this will not cause any problems even if i am making a call and have the GPS running?! If so then i will probably just buy the Tom Tom 5 bluetooth kit and get something like a parrot CK3000? would this setup work?
thanks for everyones help,
Tom
It should work. Mine does. See above. Bluetooth GPS uses a serial profile, bluetooth headset uses a headset profile. No problem to use them both at the same time.
Andre
I used my Jam as phone, mp3 player and GPS all at the same time.
1. MP3 thru my car's aux input
2. GPS thru aux input:
hardware: Tomtom BT receiver
Software: Routis 2, TomTom USA 2004 (can open both if U use GPSGate)
3. Phone thru BT headset or aux input
To answer yr question:
Since I can use both BT GPS and BT headset together. I don't think it's a problem for both BT carkit and BT GPS to works.
Phone call always get highest prioity, all other apps (GPS software, mp3 player) will be mute until U finished yr call.
Phone call is not a problem (see above) but dialing is a big trouble since no voice calling built-in. Third partner software like intellidialer and voice commander (from MS or Cyberon) helps a bit
Ive also got my jam working fine incar. I use a socket bluetooth gps unit http://www.expansys.com/product.asp?code=119717 with tomtom 5 then I have a SE HBH-600 Akono Bluetooth Headset for calls both work together! When I have a incoming call it mutes tomtom and displays the normal caller id app on top, answering the call (via the green hardware button) results in my jam going to the phone app totally and leaving tomtom minimized in the background. As soon as the call ends tomtom jumps back to the foreground, it all works very well in my opinion. Ive also assigned the camera button to switch me back to the today screen so I can launch any app (with tomtom still running in the background) via a icon.
Going to purchase a Parrot CK3300 (it includes the gps module), if i pair it with my mini s and run tomtom will the directions play through the carkit (car speakers or parrot speaker dosn't matter) or will they be played through the handset 'loudspeaker'?
No. It will play through the handset. This is a common request, but not supported. The CK3300 uses hands-free profile that is specifically for the phone.
OK, I've never used BT but am thinking about getting a BT hands-free kit, possibly the Parrot CK3100
http://www.scancom.co.uk/product.php/45/620//c66c440609f0edcbea5715dd8b464692
http://www.carcommunications.co.uk/...uct_reviews_info&products_id=160&reviews_id=4
Will this product work with an MDA Pro as a speakerphone through the car speakers? What about for playing MP3 files? Mono or stereo?
Also, if I later retire my old XDA 1 from TomTom duties and get a BT GPS unit for the MDA Pro, will it work at the same time as the BT parrot CK3100?
Also, I assume the CK100 is powered by the car: how do you cope with powering GPS and Universal devices? Run off the battery or multiple cigar lighter attachments?
This can help you take the right decision
http://www.lordpercy.com/tomtom_go_500.htm
Sounds like an expensive way of getting tinny sounds through a small speaker to me. I already have bought TomTom 5 and use it on my old XDA 1 with a wired GPS unit. What I want is to use my MDA Pro as an mp3 player and telephone through the car speakers and expect one day to get a BT GPS unit and use the Pro for Tomtom instead of the XDA 1, but I'm just wondering about the feasibility of such an idea.
What I have is a similar set up but I guess it should work for you.
I am currently running my Universal with a BT headset and a BT GPS receiver. I use the headset to hear all the commands for turning by the navigation software and so far it works great.
That's great, Vapor, thanks. I'll see if a vendor can help with compatibility then.
I have o2 MiniS paired with a Parrot CK3100. It works fine. The quality of the sound is very good as it uses the car system.
The Parrot can be set up to sync with up to 5 separate bluetooth devices. If you want GPS there is the Parrot LS3400 GPS which does everything.
I have not tried it playing MP3.
The fixing costs are exorbitant and the unit can be bought for around £100 (less for 3100) and fit it yourself it is very simple. Just two link cables for speakers and power plus install dashboard unit and microphone.
vapor said:
What I have is a similar set up but I guess it should work for you.
I am currently running my Universal with a BT headset and a BT GPS receiver. I use the headset to hear all the commands for turning by the navigation software and so far it works great.
Click to expand...
Click to collapse
Vapor, I use a Qtek 2020 (Himalaya) with a wired GPS and a Midland BT Intercom. I get the sound from the phone, no problem, but I cannot receive any sound from the Tom Tom Navigator 5. Any ideas?
Thanks,
Javiersen
well I am not too sure about the other set ups but what i did to my universal was to disable the voice command from launching when i pressed the button on my headset. there's a reg hack for it somewhere on this forum about it.
once the buttonn is pressed, it opens the audio gateway (though in mono) between my phone and the headset and every sound from the phone (including the clicks) gets played to the headset.
Hi,
I have TOMTOM installed on my M600 and also have an Erricson HCB-30 Bluetooth hansfree car kit. I want to know if i can get the TOMTOM directions to sound through the car kit rather than the phones speaker.
Any ideas??
Hi, Can anyone tell me how to get TomTom to issue route instructions through the HTC wired headset rather than the phone speaker? It would be really usefull to just have the instruction and not have to worry about looking at the maps.
try the latest version of tomtom nav, you want to find TT7_910_9185_vga black.cab I installed this last week and voices now come through my a2dp bluetooth car stereo which they never did on earlier versions of navigator7
Thanks for the info but I have never managed to get mine to work with the Motorola car kit I have in my car. It says it connects and the buttons work the stop start of the music but I get no sound. Any ideas as this would be better than the wired head phone. By the way I used the blue version. what is the difference between this and black?
I've been using TT7_910_9185_vga black.cab and when I plugged in my headpsones the instructions came straight out of them.
No idea about your car kit but TT navigation works fine over BT headsets. Just enable both wireless stereo and hands free profiles on your HD.
I once did get wired TT audio on my Wizard but that was ages ago and I cannot remember how. Besides BT is the way to go.
Tried both TT versions mentioned, UI colour is the only difference.
make sure your BT device is connected before starting tomtom, i noticed mine coming thru phone instead of car stereo speakers yesterday and I had started tomtom in the office before leaving to check it new the address i was going to, hence the instructions came out of the phone and not my BT device.