I'm on a road trip now and every time I connect the phone to a charger it switches it self off.
I have tried different cables and chargers. This also happens if I connect it to my Mac.
Is anyone else seeing this?
Thank you
Funny you should post this, today is the first day at work with my DVP and I tried to use a USB cable connected to my pc that charges my HD2 and SE MW600 headset, connected it to the Dell and it turned off just like you say. Probably not enough voltage/amps, I borrowed a BlackBerry charger and that works fine.
eyan15 said:
I'm on a road trip now and every time I connect the phone to a charger it switches it self off.
I have tried different cables and chargers. This also happens if I connect it to my Mac.
Is anyone else seeing this?
Thank you
Click to expand...
Click to collapse
I noted this in my "Nit-picky" stuff post. Needs a 1Amp charger.
Same here.
The only charger that worked is the one that came with the DVP.
I tried the 1A iP4 charger, 750 mA of the Kindle, a third party dual 1A (each) charger, 1A car charger, 2.5A iPad charger and finally my computer.
None of these works, but if it has like 50% charge then it charges with any of the above...
eyan15 said:
I tried the 1A iP4 charger, 750 mA of the Kindle, a third party dual 1A (each) charger, 1A car charger, 2.5A iPad charger and finally my computer.
None of these works, but if it has like 50% charge then it charges with any of the above...
Click to expand...
Click to collapse
It wouldn't even charge from your computer below 50%??
palmbluetooth said:
Same here.
The only charger that worked is the one that came with the DVP.
Click to expand...
Click to collapse
No...thats not true....But I have seen several different combinations work.
I have the Nexus 1, one of the Jawbone headsets, the HD2, HD7, DVP, and have access to the Focus and LG devices. All of these use the same type of cable.
The HDx cables, the Focus cable, and the Jawbones cables all work with sync and Charging. The LG cable does not...only works for the LG. Some of the older BB cables will only provide a sync or a charge...but not both.
The different USB charging adapters have different results also.
The DELL and HD7 adapter will work. They will work plugged into a wall or a power strip. The jawbone and HD2 usb adapter will not work plugged into a power strip at home, but, both of them will work plugged directly into a wall.
All the cables I have will work when plugged into a laptop, EXCEPT the LG. Apparently the LG cable I have access to only works with an LG.
Now to be honest, the HD7 shows no such reluctance to charge with any combination. The DVP does. My DVP does NOT require DELL only parts, but it is picky about what it will play with.
-My overnight charger is connected directly to the wall. It is a jawbone wired charger, no adapters or usb. All phones connect and charge ok with this.
-My Work office charger is a HD2 usb adapter with the HD2 charger cable.( which is strange because this one will not work at home plugged into a power strip.)
-My HOme office currently uses the Dell adapter plugged into a power strip with a generic sync cable. I say generic because I don't recall where it comes from...all I know its not the DVP or the HD7, because both of those cables are still wrapped up in the box they came with.
-My car charger is an ATT dual USB charger. It has last years model adapter, plus a USB connection. All my phones and head sets charge off of this combination quite nicely. I also have a Tmobile care charger but have not tested it yet.
There is definitely something different about the DVP and charging. I'm hoping Nicolas Cage will play the lead when this conspiracy is made into a movie.
the DVP will only charge with a 1A+ charger. the ones that come with BT headsets don't feed it enough to charge. USB cable plugged into a laptop USB port is hit or miss. The USB port in my car is 1.5A, charges the DVP really quick. I haven't found the make of the cable an issue, the DVP charges with any I've come across so far, HTC, BB, the cheap extendable cable from an airport, etc. it is picky about amps.
The cable is not the problem. I didn't mean that when I plug different cables it does not charge.
I have a charger hub which I connected many phones to it, HD2, palm pre, nexus one and few more and all of them charge from it. When I connect the DVP it shows its charging but in the morning the phone is dead, no charge at all.
BTW, it does charge from my laptop and desktop.
I charge my phone overnight on my PC and never had this issue
nasell said:
It wouldn't even charge from your computer below 50%??
Click to expand...
Click to collapse
It will charge from the mac from 0... then when its about half charged it charges from any plug and cable combination
Sent from my HTC Vision using XDA App
I can't get mine to charge now at ALL..
Apparently it drained and shut off in my pocket. Went to charge like I normally do.. and NOTHING..
I noticed a weird behavior yesterday when charging it would jump from charging to not charging to charging. While sitting on my table. NO MOVEMENT to the cord or anything.
Tried Dell charger, tried aftermarket one (that I have been using for 2 months), and PC USB no response from the phone at all. Even tried to swap to a battery I know was low but not dead. Still no response from the phone.
The connection looks good.. but I am thinking maybe I am having a problem with the connector in the phone ?
Took my sons battery out (He also has a DVP) and booted my phone. Plugged it in and it started to charge. Then hot swapped batteries while it was plugged in.. let the battery charge up to 25% and now it charges fine again..
FUNNY it won't boot or charge while plugged in with a dead battery.. but will stay on if booted up and you remove the battery in it..
Related
Hey everyone.
I figure we could chat on what method you prefer on charging your wizard.
Do you charge always by USB?
Do you only use a wall charger?
A combination of both?
And why? Is there a benefit for using a certain method?
I try to always charge with the wall charger.
I use usb at work - when I need to, but find that it is more of a flash charge, that does not last nearly as long as the wall charger.
Just my 2 cents
Really I heard someone saying charging with a USB saturates the chemicals better?
not sure though.
as with any chemical, the longer the "cure" time, the longer it lasts.
My wall charger charges it too quick and it dies quicker. USB seems to last longer. Also, I have been using a wall plug usb adapter for a long time (the kind you stick into the outlet and plug a usb cord into it) I never had an issue. it wasn't untill i used the original wall charger that I started to have some problems (like I bought a brand new battery and brought it in from the cold (winter) pluged it into my phone; kept my phone off and charged it. apparently the batt got so hot that the plastic covering cracked. the stupid thing was that the batt was not room temp... but I'm afraid my wall charger is deffinately retired. I had the old batt for over 2 years, maybe even 3 and so far it has held up pretty well with usb charging.
Still holds up pretty well if I use usb.
Note: on the wiki they say that the Wizard last about 11hrs on a full charge. that is a blatant lie! I have had it last about 2 days (like the nights I didn't go home) the batt never dropped lower than 30% ever!!! untill I flashed it to a different rom
I posted a fix I think works for me on Merlin's Slim rom 6.1 ver2
It consists of registry settings and and a cab file that should adress your power issues. have fun lookins
I like charging with charge
It takes longer time to charge by usb than using wall charegr
shadezero said:
Hey everyone.
I figure we could chat on what method you prefer on charging your wizard.
Do you charge always by USB?
Do you only use a wall charger?
A combination of both?
And why? Is there a benefit for using a certain method?
Click to expand...
Click to collapse
i charge it overnight with the wall charger.
however, since i have started to play on it at work, i bought a wind up usb cable, hacked the wires inside to only leave the power connections, and i bring that to work to recharge it on the computer. call me paranoid, but since the tech support guys jump in and mess with the computer remotely i dont want any chance of them digging thru my phone
and if i have to have to charge it in the car, i have an old fm transmitter you can plug a flash drive into and it will play mp3s...so i plug my phone in there instead and viola el cheapo car usb charger
What lasts longer?
Hey guys. Got an aftermarket charger after my original gave up on day one and i didnt want to have to send everything back. When i plug the phone in the scren becomes un responise, but the hardware buttons stil work. Can anyone explain this? obviously i ned to try a diferant charger, specificaly for the galaxy but how can the charger stop the screen working? Many thanks.
Sent from my GT-I9000 using XDA App
Yes the same thing happened to me,,i took the charger back..and got a proper one
just for reference, the Black Berry 9600 chargers are compatible with SGS 9000
i bough one for car use
So are the moto chargers.
My car charger is an old razor v3 mini-usb with a mini-usb adapter.
My wall charger is an old Razor v9m charger.
Never tested a BB charger as i have always charged mine with the moto ones that were already plugged in
yup i also purchased a mini usb to micro usb adapter to use my old Moto chargers with my SGS
The same happened with me while using the stock charger in a train. The capacitive touch buttons and the screen stopped working, but the hardware buttons were working. So I plugged in my laptop and used a USB cable for charging it.
Never heard of this before....
I've not come across a charger that does not work.
The chatger works but the phone doesnt while its plugged in! my back button and menu button still work along with hardware buttons...... Weird... Allready ordered an official replacement
Sent from my GT-I9000 using XDA App
jakers said:
The chatger works but the phone doesnt while its plugged in! my back button and menu button still work along with hardware buttons...... Weird... Allready ordered an official replacement
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
That will be the cable that has issues.
Pity you couldn't have tried another cable.
I am using a nokia car charger, also works fine. Blackberry didn't work for me
Yeah i know the cable causes the issue but does anyone know how? obviously other after market chargers are ok... Phone charges fine too, just cant use it when charging...
Sent from my GT-I9000 using XDA App
i'm using After market chargers too, but i have no problem
my car charger is using a BlackBerry 9500 charger (2A)
an in my PC i use a Motorola sync/charge USB mini + micro USB adapter to make it compatible with SGS 9000
they all work fine
i have not even unpacked my SGS usb cable that came in the box
Is any of this chargers really recognized as charger (charging with more than 500mA)?
You can easily verify this with the app "OSmonitor".
IF you see this: "USB Power: Online and at AC Power: Online" everything is working as it should. But if you see "AC power: Offline" your phone thinks the charger is a pc and it will only charge with 500mA.
TDO said:
Is any of this chargers really recognized as charger (charging with more than 500mA)?
You can easily verify this with the app "OSmonitor".
IF you see this: "USB Power: Online and at AC Power: Online" everything is working as it should. But if you see "AC power: Offline" your phone thinks the charger is a pc and it will only charge with 500mA.
Click to expand...
Click to collapse
The only problem with software informers here though is for those that have the problem and the screen locks up whilst being charged the software is of little use.
This question was not for people having a faulty charger but for the ones claiming that they have a functioning charger!
If the charger is not really recognized as charger it is useless for navigation. As the Galaxy S need more than the 500mA while navigating (with GPS).
yeah, minimum you need a 1A (1000mAh) charger
that's why i prefer the 2A chargers, it gives just enough juice to actually charge the battery, and use GPS+3G+WiFi+Bluetooth
else the car charger will not even be enough to power all those, and it will still consume the battery power.
that's from experience from my HTC phones
TDO said:
This question was not for people having a faulty charger but for the ones claiming that they have a functioning charger!
If the charger is not really recognized as charger it is useless for navigation. As the Galaxy S need more than the 500mA while navigating (with GPS).
Click to expand...
Click to collapse
I bought a Sharper Image Retractable USB kit that has adapters for most of the USB sockets out there. But the Micro USB that came with the kit fails to work with the SGS, the retractable USB cable is set up like an extension cable which works fine as an extension cable but putting on the adapters dont work.
I just received my stash of charging gear for my Optimus 7 today, bought from DX. Having read everywhere that USB chargers are 5V +/- 10%, and seeing that the original LG charger outputs 4.8V, I thought my purchase was ok and that this charger would work.
Turns out it doesn't. When I connect the phone to the charger via USB, I lose control of the touchscreen and the system gains a mind of its own. I literally just hold my phone in my hand and stare while it randomly enters hubs and either opens an email message or dials someone. The physical buttons still respond correctly, and it's not until I disconnect the charger from the wall socket or the phone from the USB cable that I can regain control of the phone. My guess is it's a hardware fault and not software.
Granted this unofficial charger cost me around $1, but I got some similar 5V car chargers to go with it, and I've never had problems with other USB chargers.
Unofficial charger specs:
Input: 100-240V 0.15A (0.15A) 50-60hz
Output: 5V 1A
Does someone else have this issue? Is the Optimus 7 an uncommon device for requiring 4.8V input instead of 5V?
Your problem is NOT the charger, as that has nothing to do with the functions of the phone.
Your problem is that your LG Optimus 7 E900 is a DEMO unit, with a DEMO ROM. And until you flash a stock ROM onto your phone, you will experience the demo played out while connected to a power source.
You sure? Because I tried it with the 5V 1A car adapters and no problem, and the original 4.8V 1A charger gives me no problems either.
How do I check my ROM version? Firmware is 1.0.7.10, OS is 7.0.7008.0 after the February update.
Can you get us video on this?
Please excuse the ****ty video quality
That is most fascinating. I recommend you stop using that charger on your phone
So, obviously, you do NOT have the demo ROM as I suspected initially.
Since you say it works with another 5V 1A charger, then I think this specific charger may be sending unexpected, random data signals down the USB cable, resulting in the unresponsive and bizarre behaviour. Since the original charger works well, and charges pretty fast, just stick with that for now.
At least you got the update, here in Canada, we are still waiting for our first update.
And your English is so good, and without any accents...Are you sure you aren't from our here (North America)?
This is true magic Really I have no eplanation on this problem. It is only 0,2V
Yeah, and there I was thinking that the whole point of USB charging is that it's universal and totally compatible, no matter what adapter you buy and what cable you use, provided it connects well.
It seems this is not the case, and I'm weary of trying another third party USB charger, as I still cannot tell if this phenomenon is unique to the Optimus 7 or not. Sadly, the only other MicroUSB phones I have lying around don't actually support charging via this port, just data transfer.
i also admit that im "dazzled" by ur -smart-phone...
probably that adapter is"magical" somehow... did u try it on another phone??
+i also use different chargers but never had any abnormalities so far..
Though i use the original chargers that came with my blackberry 9700 and htc-desire, and just checked the blackberry output is 5v!! i cant read the htc...
So, probably that adapter of yours is a "mutant from another place"...
confirm, htc is also 5v...
ps2- i'm also on 7008, and havent got any issues with charging on both 7004 and 7008
The problem is in the charger, it's too chinese . I had this issue with other touchscreen phones, like SE X8, X10... Just change the charger, obviously it has some hum/noise...
lol...
too chinese? lol
im having the same issue when i use the lg power adapter.. it doesnt always happen but when it happen the touch screen just when berserk.
i always thought that it happens on all units. uh oh
To be honest, I thought you were crazy till I bought a Chinese adapter as well. Don't know the voltage, but I'll check it tomorrow. I think it might have to do with the way the unit is shielded, or not. The only time I wiggs out is when I leave it on the desk, but as soon as I pick it up and pull it a few inches away form the desk or any other object it works fine. But as soon as I put it back down, the screen does the same thing.
I have a usb plug that I plug into the computer that didn't do that at the same desk, I'm going to bring in my other charger and see if it rule out the outlet / interference or just the cheap a$$ adapter....
The only part that worries me, and the only reason I might stop using it, is it takes a bit from the time I unplug it to the time the phone realizes it's unplugged and the charging icon stops. Which doesn't happen with any other charger.
I had this problem too.. until I realized it affected my other touch screen devices too (Galaxy S, Galaxy Tab)... Turns out the 5V charger was the problem. Replaced it with a 5V charger of Philips/Belkin/Samsung/LG and all worked..
The unbranded 5V chargers don't work well with capacitive screens as they seem to be letting off some extra current.
I haven't seen anyone else complain about this, so it might just be a small defect or isolated incident.
I always charge my phone during the night while I sleep and just recently woke up to find the phone only at ~70%. For some reason the AC adapter seems to be malfunctioning. Since the issue has started, I managed to get it to charge to full one night, but the rest of the time it seems to stop charging. It recognizes it being plugged in initially but then it pops up with the notification saying that the charger has been unplugged. I've tried reconnecting both connectors which will sometimes get it to start charging for 15-30 seconds before it shows as disconnected again.
It works fine via USB connected to a computer so I can only assume it's an issue with the wall adapter. I'm not sure if there's much I can do if it is an issue with the adapter but wanted to see if anyone had any ideas that would be worth trying before I give up on the adapter. Also wondering if anyone else has had this happen.
I don't have that problem. Call and get it replaced. All you news is a USB AC adapter.
Have you checked the socket you are plugging the charger into? Have you tried a different wall socket or socket on the power strip?
Are you using a Motorola brand wall outlet and usb? I was using an aftermarket cable and had this issue. So I got a branded cable and now it's fine
Sent from my iPhone killer ATRIX using XDA Premium App
i had same issues
my atrix would only charge also to 70% so i was about to return it. i forgot that it also came with a stand alone battery charger to charge just the battery. charged it and then put it on my atrix and said 100% again. hope this helps..
Yeah get the wall socket and make sure that's not the problem. Also I can't imagine it being the cable I use a 15 foot after market cheapo cable I got off newegg for like 3 bucks and it charges my phone all the way and I don't even use the wall adapter moto gave me I use some random one that's for one of my old phone or my nikon camera I don't remember. Also moto cable is crap it doesn't let me use adb doesn't seem to push enough power to my phone.
But thats just my 2 cents
Sent from my Atrix
OEM charging cables > aftermarket/cheapo/gas station cables
Sent from my MB860 using XDA Premium App
Use the cables that come with the atrix.
Problem solved.
/endthread
I went out of town this week and made sure to grab my USB cable, but left the AC adapter at home figuring I'd just charge off my laptop via usb. Apparently not... I also tried plugging the USB cord into my iPhone AC/usb adapter with no luck. The only thing I've found is that when you turn off the Tab and connect to one of these devices, a green battery indicator will pop up showing that it is charging. Well, after about 16 hours, it made it from 15% all the way up to 48%. Does anyone know any way around turning it off to charge or why it is barely charging when it is off?
Jaydawgx7 said:
I went out of town this week and made sure to grab my USB cable, but left the AC adapter at home figuring I'd just charge off my laptop via usb. Apparently not... I also tried plugging the USB cord into my iPhone AC/usb adapter with no luck. The only thing I've found is that when you turn off the Tab and connect to one of these devices, a green battery indicator will pop up showing that it is charging. Well, after about 16 hours, it made it from 15% all the way up to 48%. Does anyone know any way around turning it off to charge or why it is barely charging when it is off?
Click to expand...
Click to collapse
Well seeing as it has a 7000mAh battery, just about any run-of-the-mill USB charger isn't going to cut it. The amperage would have higher as well. Now i would hazard that an iPad charger (10 watts) would probably work just fine vs an iPod charger.
Your laptop's USB port isn't providing enough juice to charge fully. With the screen off it will only trickle charge and very slowly at that.
You'll need at least 5 Volt 2 Amp chargers.
You can also try this:
http://forum.xda-developers.com/showpost.php?p=14890063&postcount=16
Or this:
http://cgi.ebay.com/190522553195?ru...ee-All-Categories&_fvi=1&_rdc=1#ht_3085wt_905
I've ordered both last week but neither have arrived yet. I'll report back.
You need a 5vdc supply that will provide 2A. 10W, not 5w as the previous post said. That adapter on ebay won't help the charge, it just disconnects the data line so it does not change its mode when connected to a computer. There are a lot of power supplies that will work and even more that won't, just made sure it supplies 2a. If you want to charge off your laptop then you will want a Y adapter similar to what is on usb powered hard drives but even then you will need to use 2 usb 2.0 or 3.0 ports and will provably only get 1a out.
Sent from my GT-P7510 using XDA Premium App