flash 10.1 on spica? possible with custom rom? or processor not fast enough?
yeahman45 said:
flash 10.1 on spica? possible with custom rom? or processor not fast enough?
Click to expand...
Click to collapse
First of all flash 10.1 exists only for 2.2 and up, but for spica there is no an official 2.2, some kernels like cyanogenmod 6.1.1 do it with flash integratde, i can send it to u but you'll have problems with internet navigation.
with the mode below you can.
No, you can't get Flash 10.1 on i5700 even if you would have 2.2 ... becouse Flash 10.1 also require ARMv7 ... and Spica only have ARMv6 ...
hxxp://pdadb.net/index.php?m=specs&id=2033&c=samsung_gt-i5700_galaxy_spica
Search for LG Optimus One (P500) nd you will see that even if it comes with 2.2, you can't run Flash 10.1 on it ...
there was anywhen a little mod which realized it. not really stable but for example on uhrzeit.org i was able to see the flash clock. can't find that mod anymore...
Related
Hello,
I'm a complete newbe in HD2 Android.
Is the NAND Version compatible with adobe flash player 10.1 or 10.2 ?!
Thanks for Answeres.
f;ash
10.2 never had any issues with apps yet
Flash should work on all builds. Unless stated in the OP. Dont think I've ever seen this though.
Sent From My Fingers To Your Face.....
.As long as you use a 2.2 Froyo and up ROM you can use Adobe Flash 10.1 or 10.2
Thanks all.
Nice support here
Hi all!
I tried to install Froyo 2.2 Jellyfish, EFIN, flb ROMS but when them are flashed then I see only Android logo but not boot logo so not work and CM7 ROMs works fine!
So how I can fix it?
can I?
and where I can get kernel for ZTE Blade CM 7.1 RC?
edit: IN cm7 OR NEWER CM7 the voice search is not work, how to get work it?
Are you Gen 1 or Gen 2?
I bought ZTE Blade II which used Froyo and now I use CyanogenMod 7 GingerBread 2.3.4...
So my Blade is GEN2
I use clockworkMod and sometimes ROM Manager ....
So, Do I need the GEN2 Froyo ROM to get it to work on my Blade?
=)
manumanfred said:
I bought ZTE Blade II which used Froyo and now I
So, Do I need the GEN2 Froyo ROM to get it to work on my Blade?
=)
Click to expand...
Click to collapse
Yup, that's why I think it wasn't booting. Try Swedish Spring. It's Gen 1 and Gen 2.
OK, thanks!
Right now I don't flash it to 2.2 because I use CM 7.1 RC which have good free memory so I can do something with my boring blade!
only problem is tat the battery ends too fast! that is really bad!
Hello,
You'll have to excuse my relative anonymity with regards to Android. I've always been a BlackBerry user and I've recently switched to a Note and couldn't be happier, but I know little about ROM's, development and so on.
I've rooted my Note and loaded a Custom ROM - imilka's CyanogenMod9, which has been working fantastically. However, I do miss some of the stock TouchWiz applications like S Memo and S Planner. Also, I'd like to return to Gingerbread and simply wait for the official ICS update from Samsung. Custom ROM's are nice and efficient, but for daily use I'm starting to think a stock ROM might be better for me.
My question is, how can I return to the latest stock ROM of the Note, without losing root or bricking my phone?
Thanks in advance, and I apologize if this has been covered someplace else but I couldn't find it.
K
KarimSalloum said:
Hello,
You'll have to excuse my relative anonymity with regards to Android. I've always been a BlackBerry user and I've recently switched to a Note and couldn't be happier, but I know little about ROM's, development and so on.
I've rooted my Note and loaded a Custom ROM - imilka's CyanogenMod9, which has been working fantastically. However, I do miss some of the stock TouchWiz applications like S Memo and S Planner. Also, I'd like to return to Gingerbread and simply wait for the official ICS update from Samsung. Custom ROM's are nice and efficient, but for daily use I'm starting to think a stock ROM might be better for me.
My question is, how can I return to the latest stock ROM of the Note, without losing root or bricking my phone?
Thanks in advance, and I apologize if this has been covered someplace else but I couldn't find it.
K
Click to expand...
Click to collapse
simple flash absyss note kernel v4.2--> fullwipe(data+cache+dalvic)-->download mode-->then install stock rom from odin..then root it..or directly install prerooted rom. but i sujjest you alba v2 ..its the stock ics with all samsung apps you need
pp_prathap said:
simple flash absyss note kernel v4.2--> fullwipe(data+cache+dalvic)-->download mode-->then install stock rom from odin..then root it..or directly install prerooted rom. but i sujjest you alba v2 ..its the stock ics with all samsung apps you need
Click to expand...
Click to collapse
flash abyssnote kernel 3.9/4.2 ---> REBOOT RECOVERY ---> flash GB rom
Thank you both, I'm downloading Alba v2 to test it out. if not i'll go back to GB.
I've just flashed the Official ICS Room and made the root my self ! I prefere the Stock room's, but when i'm tring to flash the Pershoot Kermel, with overclock, i can't get the wi-fi working, anyone can tell me why ? I know that pershoot kermel is made for the CM Room, but dont work in any other? If dont can you tell me a Kernel with oc that work in my rooted stock rom ?
Other question, is it possible to flash a 7510 Rom in a 7500 tablet ? i got the 3g version but i never use the 3g, and i've want to try the Task Room, everybody says it the best one and i'm curious.
Ps: Sorry for the bad english
Pershoots kernel does not support the official ICS ROM. He said he might do a one time release of his kernel for the official ROM..
Bummer
Perhaps I'll get my hands on it so WiFi will work,won't promise though...
rueloparente said:
I've just flashed the Official ICS Room and made the root my self ! I prefere the Stock room's, but when i'm tring to flash the Pershoot Kermel, with overclock, i can't get the wi-fi working, anyone can tell me why ? I know that pershoot kermel is made for the CM Room, but dont work in any other? If dont can you tell me a Kernel with oc that work in my rooted stock rom ?
Other question, is it possible to flash a 7510 Rom in a 7500 tablet ? i got the 3g version but i never use the 3g, and i've want to try the Task Room, everybody says it the best one and i'm curious.
Ps: Sorry for the bad english
Click to expand...
Click to collapse
Check the Dev section - The A1 kernel is designed for stock ICS. The XE version I believe is OC'd to 1.4 GHz if I'm not mistaken.
I don't have a 3G tablet to be able to say for sure but I believe lots of ROM threads have info where people have asked this question. Research the Task ICS thread for details but I believe you'll be fine - short of losing 3G of course
The A1 kernel did nothing to fix the issue on my device(flickering screen still...),I don't say it's useless though...
hi,iam new to this thread,i want to upgrad my samsung galaxy to latest version,so is it possible to upgrade?if it is means pls guide me to upgrade my mobile
Gingerbread is the latest android version available for duos
You can check sammobile.com/firmwares to check latest stock rom baseband versions for your region
Custom Gingerbread roms and cm7 roms will be in dev section - read them for me details about rom features
Or simply update it from your phone if you are having internet on it.
Go to Settings
Scroll down to About Phone (last option)
then software update.
Now it will download the update & will ask to install it.
Your phone should be charged at least 30% for this.
marcussmith2626 said:
Gingerbread is the latest android version available for duos
You can check sammobile.com/firmwares to check latest stock rom baseband versions for your region
Custom Gingerbread roms and cm7 roms will be in dev section - read them for me details about rom features
Click to expand...
Click to collapse
iam newbie,gingerbread is 2.3 version ,so i need latest version 4,so is it possible to upgrade my version,even some games like templerun,zombierun are not working in my mobile,so i need to update
anonymoussss said:
even some games like templerun,zombierun are not working in my mobile,so i need to update
Click to expand...
Click to collapse
galaxy y dous is an low end device, I cant run temple run and zombie run smoothly, but you can make a little smoother by installing chainfire
(requires root--search for it)
anonymoussss said:
iam newbie,gingerbread is 2.3 version ,so i need latest version 4,so is it possible to upgrade my version,even some games like templerun,zombierun are not working in my mobile,so i need to update
Click to expand...
Click to collapse
It is not possible like I told you - duos only supports Gingerbread! There is no jellybean for duos!
That means only 2.3.6 stock based or 2.3.7 cm7 based are available
There is no 4.0+ available
There is cm9 available for GT-S5300 but it only boots nothing else works
There will be no working cm9 because the drivers for this phone have not & will not be released
If you want to play mentioned games properly buy a phone with at least ics and an armv7 processor
(Galaxy y is armv6 and not suitable for hd games)
you can't samsung has give up on development of y duos the development we have is xda :good: