Hey guys I have a Telstra (australia) branded tab and was wondering how i can remove their awful boot and power down videos.
*#1234# gives me
PDA: P1000TDVJJ3
PHONE: P1000TDVJJ3
CSC: P1000TTELJJ4
If that means anything to you, the tab has everything enabled, 3g/wifi/voice
Related
I am new at all of this. So excuse me, I have recently purchased a GT-i9505 and was wondering what the newest firmware is for my version.
I cannot move my apps to SD card and I believe I have the old firmware as
PDA: i9505XXUAMDM
CSC: i9505OXXAMDB
I have tried Kies update and it says it is latest firmware PDA: MDM, Phone: MDM, CSC: MDB (BTU)
I am in the United Kingdom, and as far as I am aware it originated here as it came with a 3 pin plug. It is also unlocked and free of branding.
Why is the new firmware MGA not on my phone or on update? How do I get it, as I am running lower on room on my phone everyday.
Thank you
jamieostrich said:
I am new at all of this. So excuse me, I have recently purchased a GT-i9505 and was wondering what the newest firmware is for my version.
I cannot move my apps to SD card and I believe I have the old firmware as
PDA: i9505XXUAMDM
CSC: i9505OXXAMDB
I have tried Kies update and it says it is latest firmware PDA: MDM, Phone: MDM, CSC: MDB (BTU)
I am in the United Kingdom, and as far as I am aware it originated here as it came with a 3 pin plug. It is also unlocked and free of branding.
Why is the new firmware MGA not on my phone or on update? How do I get it, as I am running lower on room on my phone everyday.
Thank you
Click to expand...
Click to collapse
Here bro http://www.hotfile.com/dl/235905226/e7bdf1a/I9505XXUBMGA_I9505OXXBMG3_BTU.zip.html. Flash this MGA rom with Odin. See item 1 im my signature for how to. This is the latest version atm. For moving apps you need root.
Hi all,
looking for some help.
I have a Note 3 from Germany and have run into a problem trying to load Skygo onto it. For some reason it keeps saying device not supported.
After doing some research i came to the conclusion that my phone must have a German firmware/CSC and have since Flashed (?) to a uk ROM.
I believe this was successful but Skygo still doesn't work?
Here are the details from *#1234#
AP: N9005XXUENB7
CP: N9005XXUENB1
CSC: N9005OXAENB1
Here's some additional info from "Phone info":
Country of origin: Made in Vietnam
Knox 0x0
Original CSC Code: BTU
Firmwares CSC Code: BTU
Active CSC Code: BTU
CSC Country: UK & IRE
Android version 4.4.2 KOT49H N9005XXUENB7
I'm really not that Tech savvy and i'm unsure if my ROOT was successful and if my CSC has changed?
Can anyone help?
Thanks,
Rees
I've got the following identifiers for my phone:
AP: I9505XXUEND1
CP: I9505XXUEND1
CSC: I9505TELENC1
I've moved from Australia (Telstra) to the US (AT&T). I'm on Jellybean, and rooted so that I could do backups with Titanium Backup. I've started to have stability issues where SystemUI crashes occasionally, and at a rate of about once daily. I haven't been able to identify the cause of the problem. Seems like aLogger only shows me logs when I start it up, which I usually only do after a crash.
I'm considering making a move to KitKat. However, I'm not even sure if there is an upgrade out there for me. I don't see one for either Australia or US. Anyone know if there's an appropriate one for me? And while I'm at it, should I consider changing my baseband from the Telstra one to an AT&T one?
Thanks for your advice.
kjaslow said:
I've got the following identifiers for my phone:
AP: I9505XXUEND1
CP: I9505XXUEND1
CSC: I9505TELENC1
I've moved from Australia (Telstra) to the US (AT&T). I'm on Jellybean, and rooted so that I could do backups with Titanium Backup. I've started to have stability issues where SystemUI crashes occasionally, and at a rate of about once daily. I haven't been able to identify the cause of the problem. Seems like aLogger only shows me logs when I start it up, which I usually only do after a crash.
I'm considering making a move to KitKat. However, I'm not even sure if there is an upgrade out there for me. I don't see one for either Australia or US. Anyone know if there's an appropriate one for me? And while I'm at it, should I consider changing my baseband from the Telstra one to an AT&T one?
Thanks for your advice.
Click to expand...
Click to collapse
Hi ,
you can upgrade to any firmware you want , in the USA they S4
You could flash this for example, i mean for the english
http://www.sammobile.com/firmwares/3/?download=34317
Country: United Kingdom
Version: Android 4.4.2
Changelist: 2309103
Build date: Wed, 23 Jul 2014 10:16:57 +0000
Product Code: BTU
PDA: I9505XXUGNG8
CSC: I9505BTUGNG2
MODEM: I9505XXUGNG8
That is the latest firmware for the I9505 ....BUT is not possible to root with towelroot to avoid knox warranty bit tripping ( you have to re root after flashing with odin)
you could flash something a little bit older like , so you can root
http://www.sammobile.com/firmwares/3/?download=31852
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: United Kingdom
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: BTU
PDA: I9505XXUFNB9
CSC: I9505BTUFNE1
MODEM: I9505XXUFNB9
Regarding the frequencies not 100% sure , AT&T has some frequencies that the I9505 does not work with so it may depends on the specific frequency in where you are at check this:
http://en.wikipedia.org/wiki/AT&T_Mobility
http://en.wikipedia.org/wiki/4G_Australia
http://www.gsmarena.com/samsung_i9505_galaxy_s4-5371.php
I know there is similar thread but I want to be sure with this in only my case so...
I have got SM-G900F from Poland and its branded with Plus network. The put about 6-8 own **** apps in my phone and f^%$ing boot animation that i can't remove also.
I don't want to root. I don't want CWM and I don't want to lose warranty also. What is the safest way to get rid of that branding from my phone?
This is what I know. If I'm wrong let me know.
Now I have this one installed
Date: 2015-02-17, Country/Carrier: Poland (PLUS), Version: 5.0, PDA: G900FXXU1BOA3, CSC: G900FPLS1BOA1, Kies:YES
If I flash official firmware from SamMobile I will not get any KNOX counter and still have warranty.
There are few XEO firmwares with Lolipop (XEO means debranded so they are just for me)
Date:2015-02-02, Country/Carrier: Poland, Version: 5.0, PDA: G900FXXU1BOA3, CSC: G900FXEO1BOA1, Kies:YES
Date:2015-02-02, Country/Carrier: Poland, Version: 5.0, PDA: G900FXXU1BNL9, CSC: G900FXEO1BNL1, Kies:NO
Date:2014-12-23, Country/Carrier: Poland, Version: 5.0, PDA: G900FXXU1BNL7, CSC: G900FXEO1BNL1, Kies:NO
Date:2014-12-16, Country/Carrier: Poland, Version: 5.0, PDA: G900FXXU1BNL2, CSC: G900FXEO1BNL1, Kies:NO
All XEO roms will work fine for me and I get my phone debranded
I should download any XEO firmware and use Odin to flash it. Then I should make factory reset from options in my phone and all apps will disappear and I will still have warranty.
hello,
i bought edge 7 dual with:
product code: sm-g935fzkuxeo
code csc: BRI
System version: G955fxxu1aqcc
version csc: g935foxa1zplh
version modem: g935fxxu1dqc2
Can someone give me original soft for this phone? nogaut?? pls help.
radektokarski said:
hello,
i bought edge 7 dual with:
product code: sm-g935fzkuxeo
code csc: BRI
System version: G955fxxu1aqcc
version csc: g935foxa1zplh
version modem: g935fxxu1dqc2
Can someone give me original soft for this phone? nogaut?? pls help.
Click to expand...
Click to collapse
Anyone?
Connect to pc with smart switch installed it will put you to latest available software