Related
ok guys, i have unbricked my vibrant before after the OTA update about 5 weeks ago. i am pretty new at this smart phone stuff, but was pleasantly surprised i was able to get odin to fix the brick. about an hour ago i launched the stupid VooDoo in the OCLF app and the phone now will go as far as the animated galaxy "S", then go blank. i attempted the Odin flash about 5 times now with the same result each time, just boots up past the vibrant screen to galaxy S then goes blank. when the phone restarts or reboots after the odin flash a message in red reads DATA WIPE FAILED between a few yellow text lines. when i try to reinstall packages through boot screen i get the same message i got after the OTA brick, E:Can't open /sdcard/update.zip now the phone was rooted with the OCLF before i launched VooDoo. can somebody help me out?!?
Odin back to stock. That should fix it.
http://forum.xda-developers.com/showthread.php?t=734475
jnutz said:
Odin back to stock. That should fix it.
http://forum.xda-developers.com/showthread.php?t=734475
Click to expand...
Click to collapse
I second this comment. Flashing back to stock shall help. I've soft brick my phone and unbricked it recently.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
Anybody else have an suggestions?? like i said in OP i have tried to flash back to stock, about 5-6 times now, all with the same result. phone goes blank after galaxy S screen and music. thanks
As mentioned in a million threads, you need to flash Eugene's "froyo that doesn't brick." Then flash whatever firmware you want.
flashed the froyo successfully from eugene. cool set up, major issue though, i have no application storage now. there are a ton of apps in manage apps and i cannot uninstall any of them. can i fix this somehow??
i'm going to try flashing froyo back in it so it works, not select repartition. then restart odin, select repartition and flash the old vj12 rar and see if that works
Never seemed to get the answer to this. What is the purpose of "Eugene's froyo that doesn't brick?"
Why do some people suggest flashing that, before they odin?
Did eugene take everything down from xda, I can't even find that anymore.
i actually found what i though was the froyo that doesn't brick but it was actually his jk2 version. i clicked Eugene's link on one of his posts and it took me to his site and thats were i got it. i did some searching and actually found the "froyo that doesn't brick", it fixed my baby! i couldn't do anything once flashed but i was then able to flash back to jdf then j16 and all is well. i have flashed like 10 roms into her since this weekend with success, i am back to running j16 with some extras as the games i play don't support 2.2
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Did you install the drivers
Sent from my SGH-T959 using XDA App
spyda23 said:
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Click to expand...
Click to collapse
+1 for the drivers.
spyda23 said:
I'm trying to use Odin but my pc (win xp) is not recognizing my phone. Should i try another pc with vista or win7?
Click to expand...
Click to collapse
Check your driver and be sure you phone is in download mode.
jackhuny said:
Check your driver and be sure you phone is in download mode.
Click to expand...
Click to collapse
When i'm in download mode, it doesn't recognize it. When i'm in recovery mode, Odin recognizes it. If i turn my phone on and plug it in, my pc recognizes it, drivers are ok.
Any answers, i could really use the help
what version of Odin are you running? not that it should matter. try pulling the batt, hold volume up and down, insert batt while volume buttons are pressed then plug in USB and wait for it to go into download mode then release buttons. see if Odin recognizes it then.
try a different cable too if above doesn't work
Turn your phone off open odin hold down volume up and down,now plug in the usb this will get you into dl mode now you need to flash Froyo ~~~That does not Brick! rom with odin. Right after you flash that get back into download mode open odin first then with the phone ( power the phone off give it a min, hold down the volume up and down keys, now insert the usb cord BAM download mode) flash back to whatever rom you want.
Hey I'm not so tech sabby could you help wit steps to do the same cuz kind of have same prob. With voodoo
Technowiz said:
Hey I'm not so tech sabby could you help wit steps to do the same cuz kind of have same prob. With voodoo
Click to expand...
Click to collapse
Or you could do the same steps I have already given and it will work, you do know how to use odin right?
Sent from my SGH-T959 using XDA App
Hello - I urgently need help with my Samsung Galaxy Tab.
I flashed a wrong PIT/PDA & what happened is:
- my Galaxy Tab does not reboot at all
- the flashlight in the back suddenly switched ON automatically
No matter how long I press the Power Button, the device switches off just for one second, and then the flashlight switches ON again - but no reboot.
I cannot get into download mode / when I try to use commands with Odin, it only says: error: device not found.
Odin does show my device ([COM:4]), it appears as: Added // only the download mode does not work!
When I tried to start SuperOneClick, trying to Unroot, it is stuck with: "Waiting for device"
Weirdly, though, my netbook does install the drivers automatically when I plug it in. Which means, my netbook can "read" the device.
Does anyone here know how I could make the extreme Hard Reset, without having to reboot?
--------------------------
If you think this post should rather go to the Developers section, please feel free to move it // I am thankful for any help
Have you tried connecting to it with ADB to see if you can reach it at this level (apart from with SuperOneClick)? Try installing the Droid Explorer application on your Windows PC and see if it will recognise your Tab. If it will you should be able to initiate a reset from the Droid Explorer UI. If it won't I would suggest that you are hard bricked and it will have to visit Samsung. Good luck!
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
QueenAmy said:
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
Click to expand...
Click to collapse
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
rotohammer said:
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
Click to expand...
Click to collapse
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
bdl1969 said:
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
Click to expand...
Click to collapse
lol, I'll get my cheap Chinese Tab cables this week and hack one up to test.
My guess is that Odin will only see the Tab when it is in download mode. Id try flashing it in that state and find out for sure. It sure cant hurt.
You went to your retailer?I have exactly the same problem!!
First of all - THANK YOU for having started this discussion.
Yes, I went to the retailer. My Galaxy Tab is with Samsung Technical Support now; will keep you posted.
To answer some earlier questions, yes ODIN did recognize my Tab; but the screen on the Tab remained totally black. Only this strange "flash" light on the back kept glowing.
rotohammer, if you really get to test what you mentioned before, I'd be interested to hear what happened - but, personally I would not recommend it, unless you are sure you want to risk completely ruining your dear Tab.
studio54 said:
You went to your retailer?I have exactly the same problem!!
Click to expand...
Click to collapse
I did ... and less than 2 weeks later ..
Update:
13-Jan-2011
Today noon I got a call from my retailer my Galaxy Tab was ready to be picked up & I was really lucky: my retailer said the repair would normally cost EUR 650.-
.. as I had damaged the whole mainboard ..
but as the Tab was less than 1 month old, they were so kind to do it w/in my warranty - so I did not have to pay for it.
I'm very relieved, as you can imagine.
Got my Galaxy Tab back with a brand-new mainboard, everything is working well &
I sure learned my lesson.
I will not flash the Galaxy Tab again.
Only because Galaxy Tab and Galaxy i9000 are both on Froyo, it does NOT mean that you can flash the same software!
I wanted to apply the 3 button combo fix on my Galaxy Tab but apparently it does not work!
Bricked mine as well, but mine is a weird case
I bring up the weirdest case of bricking so far, i was on an official Arabic (P1000JPJK2)Firmware, and i noticed a new Arabic release on SamsungFirmware.com (P1000JPJM3) i downloaded it and downloaded the .pit file, Started Odin v1.7 and unchecked repartition, selected the PDA and the pit and started the processes, odin finished and Reseted the device and give me the green light with the word PASS, however, the my p1000 decided to reboot into download mode automatically, so i rebooted the device manually and got stock in the Samsung Logo and keeps looping. so i decided to go back to my previous Rom but it will always fail and i would have to reboot my tab and it will show the good ol' Phon-PC logos, however, odin would see it and would flash anything i want. i tried flashing various versions of rom's but they would all fail... i tried repartition checked and unchecked and nothing worked, so lastly i decided to flash the .pit file alone and that worked and got me back to where i was stuck in the Samsung logo loop and no ROM would be flashed through Odin BUT the (P1000JPJM3) but it still will not boot! and funny enough i took it to sammy's repair shop and they told me to come pick it up in a few hours but they told me that they failed to repair it and they would need to keep it till tomorrow, but they guy was not that optimistic about getting it repaired and to make things worse i couldn't get unrooted so there is a good chance that there will be no warranty... does this mean that i bricked it for good? please help me.
Hey everyone,
so first let me tell you that I am not a newb so I tried every possible solution I could come up with, so this is just a last attempt.
So I wanted to tests some ROMs around since I had a free friday night and Odin screwed me over. I tried to flash JM9 with 512, some other Froyo ROMs and even gave a shot to Darky's resurrection. But no matter what I try, Odin always does one of these things:
It gets stuck at Initializing...
It gets stuck at SET PARTITION...
It gets stuck at Kernel flashing...
It turns my screen into a random colour and gets stuck (green, gray, blue, red so far..)
Tried flashing with/without PIT/Partition, 1 package ROMs, 3 package ROMs, etc.. To no avail. Tried to have the battery out for half an hour, etc..
All I can do with my phone atm is acces Download mode, so that kinda keeps me hoping, however it won't boot or go to recovery..
So any ideas anyone? Thanks for any help..
Download a known working copy of Odin and try that. also download new firmware from samfirmwares too just in case your current firmwares have become corrupted.
used odin 1.0 with pit 512
this was a guide i made for a not so savvy mate. so folder links and other bits you wont have but im sure it will help.
STAGE ONE
You will see in the stage one folder two items one is ODIN the other is a PIT file.
Lets plug your phone cable into a usb port ( on the main board is best not extensions)
Open up ODIN
On the left hand side make sure “Re-Partition” is ticked.
Now click on the words “PIT”
This should bring you up a selection window locate it to the “PIT” file in the same folder as ODIN.
Now put your phone in that downloader mode VOL DOWN+HOME+POWER
Plug the phone into the USB port.
You will now see the first box has a yellow com port under it (top left hand corner)
Now click start.
You will see some text in the bottom left message box.
This may take about 5mins.
But once it is done you will see a big green PASS!! In the top left box.
If its been to long say 10mins take battery out and start again.
If it doesn’t work second time Gtalk.
Once you see PASS!!!! Unplug the phone and take battery out.
STAGE TWO
On the right hand side click RESET ( its next to start)
Now un-tick RE-Partition.
Now in the stage two folder there is three files.
In ODIN click “PDA” this will bring up the selection window
Match it to this file
I9000XXJPY-REV03-PDA-low-CL757011.tar.md5
Phone matches with this file.
MODEM_I9000XXJPY.tar.md5
CSC matches with this file.
GT-I9000-CSC-MULTI-OXAJPY.tar.md5
Now that you have selected the files put the battery back in your phone.
Go back to downloader mode.
Plug phone it when you see the Yellow com port like in stage one click start.
This may take a while but you will see some text in messages box bottom left.
Once this is done we will again get the green PASS!!!!
The phone will proceed to the home screen.
You have successfully updated your phone to the latest version.
Pat on back.
Also make sure kies isnt running and try as many different usb ports as you can.
windows sucks at com port control.
Thanks everyone for the input but as I've mentioned I've tried all possible methods that came to mind. Even the one described above..
Any other ideas? :x
Could it be that your USB driver is screwing things up? Try flashing from a different port or better yet a different computer.
If all else fails maybe you could try to flash with Heimdall instead of Odin.
dakine said:
Could it be that your USB driver is screwing things up? Try flashing from a different port or better yet a different computer.
If all else fails maybe you could try to flash with Heimdall instead of Odin.
Click to expand...
Click to collapse
Different USB ports is always worth trying.
Sent from my GT-I9000 using XDA App
I always use Odin 1.0 but you could try 1.3 or 1.7.
Sent from my GT-I9000 using XDA App
Just throwing ideas around really.
can you get into upload mode? Try clearing SD card. Clearing cashe. All thy kind of thing.
Try flashing a different kernal disable all lax fix stuff.
What was your set up before you tried flashing?
Sent from my GT-I9000 using XDA App
Install (or re-install, whatever) USB drivers. http://forum.xda-developers.com/showthread.php?t=728929
Uninstall Kies (iff installed), it's horrible anyway
Like others said, use a different USB port. Reboot PC (lol, I know).
I like Odin 1.7 best so far...
And I agree, please describe your initial setup. Any fancy kernels? Lagfix/ext4?
Well finally. I did everything on my PC and nothing worked, but managed to try on friend's PC and it worked.
Anyone has an idea on what could have caused this? Hope future flashing will work on my PC
Also thanks to everyone trying to help, limited to 5 thanks only tho
I'm guessing it a driver issue. Assuming you have Windows, whenever you plug a USB device a driver is installed. You can see what these are if you enable the hidden devices: http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 for Vista for example, but it works just like that for others.
Wipe every trace of the Samsung/Android drivers, uninstall Kies, run a registry cleaner, rebbot (obviously), and just reinstall the Samsung/Android drivers. Get the newest Odin. If that doesn't help, I have no idea what the cause might be.
Hello, I so hope someone can help. I just updated my galaxy tab 2 7 p113 to Android 4.0.4 UEBLH2. That was done automatically from samsung. I wanted to then install the newest update to 4.1.1 jellybean. So I downloaded it from this link. http://www.trickytweaks.com/update-...ecli4-4-1-1-jelly-bean-ota-test-firmware.html. I put the official Android 4.1.1 UEBLH2 Firmware on my sdcard then held down my power and up volume and installed it. HOWEVER, it never finished installing. Went all the way to the end. Now I HAVE NO USB CONNECTION and NO BOOT UP. Just black Since I dont have usb connection I cant us oden. CAN ANYBODY PLEASE HELP? I still can put files on my micro disk card and then put sd disk in my tab and use the power button up arrow to install something but I tried installing clockwork mod but that did not work. Iam out of ideas. P.S. My tab IS NOT ROOTED. I tried updating back to and original rom 4.04 I download but that did work. Thank you.
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
Yup, this should get you going again. If you can get into download mode, you should be okay. That's what Odin needs.
Download mode is volume down plus power. Then volume up
Recovery mode is volume up plus power.
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
I can not understand how you can not access usb, is it a lacking driver so download kies and reboot and try connect again ,also try a different usb ports (esp the rear of case) of your computer
Was usb working before the problem?
do you have cwm or stock recovery?
If cwm so download cm10 or cm9 from www.teamhacksung.org and put in usb card and flash but do a cash delete and dalvik delete afterwards not for boot loop
If stock so try stock firmware from www.samfirmware.com (register their first) and put in sd card and try to flash
Sent from Galaxy S2 or Galaxy Tab2
growthweb said:
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
Click to expand...
Click to collapse
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
dictionary said:
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
Click to expand...
Click to collapse
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
How about you just gtalk me, lol. I'll probably reply faster there anyway. deliberation at gmail dot com.
Don't use kies. Install the Samsung driver for mobile phones (Google it).
Sent from my GT-P5113 using Tapatalk 2
Download Mode
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
Once you are in download mode, connect your tab to the computer with the usb connection.....you should see a com xx number pop up in Odin in yellow reporting your device is connected thru a communication port. From there you will be able to choose the file you want as a PDA uncheck everything else...reboot...reset timer....whatever. Just make sure you have the correct firmware. There is a Odin flashback to Stock rom in the development section. Make sure it's for your device. Once you start Odin, should take about 4 mins...disconnect and hold the power button down to reboot. That's it....
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
growthweb said:
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
Click to expand...
Click to collapse
Glad you got it sorted.
i jus did the same thing u did
hi how r u doing. i jus did the same mistake u did and i really need your help please
Maxwell255 said:
hi how r u doing. i jus did the same mistake u did and i really need your help please
Click to expand...
Click to collapse
Hi.if u have done the exact same thing then just read the previous page and comments.
Sent from my GT-P3110 using xda app-developers app
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
PeartFan40 said:
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Click to expand...
Click to collapse
Thread is still actually open, lol
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
igotbricked said:
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
Click to expand...
Click to collapse
You have to reflash your tablet using ODIN. It's not that hard. Just follow the second method here (you don't need to download android SDK)
copy this in your navigator bar : rootzwiki . com/topic/37272-verizonsch-i705-root-for-all-current-firmware/ ( delete space around the dot)
Plus, your tab will be rooted.
You're welcome.
P.S : This limitation of URL is annoying as hell.
Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Karbooo said:
Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Click to expand...
Click to collapse
Please search for similar threads. This same issue is being posted over and over and over again. When you were making this post, what "similar threads" or "similar topics" showed up? Did you check them for a solution?
yes sorry i looked at all of them and they all involved well just flashing the stock rom but i cant get my computer to see my gs4 on download mode...i got the drivers and odin installed.
Well, this thread has a couple of ideas...
http://forum.xda-developers.com/showthread.php?t=2405991
or maybe here...
http://forum.xda-developers.com/showthread.php?t=2405127
You might also want to look at the TWRP thread in the development section.
Try again to get into recovery, the key sequence can be tricky, make sure you are doing it just right. "Doing it just right" has been discussed many times.
Also, look at this thread, maybe it will help...
http://forum.xda-developers.com/showthread.php?t=2398336
Yea, I realize that thread is about MF3, but it still has ideas that might help you.
There are also a ton of threads about how to get your PC to recognize ODIN.....search.......good luck.
yeah ive been at it for hours man those links can all access the recovery i cant... i tried everything got the drivers up tried all the odins and its just stuck on "downloading do not turn off target" and my pc doesnt see it...
Odin finally recognized it on the pc in download mode and i was able to flash the stock rom but it seems it wasnts successful...it still just vibrates and vibrates when i press the power...
Try flashing the open recovery.
Sent from a jedi extacy note II
If you mean the CWM recovery I tried it on Odin and it failed.... :""(
Sent from my Nexus 7 using xda premium
Take battery out, back in, power+volumedown, download mode, Install Samsung Kies, do Kies update, connect to PC, Tools-> firmware initialization, take battery out and type model/serial Number, wait patiently until it finishes.
Try different USB port or different PC. Use stock USB cable comes with original box.
If Kies screen get stuck at model number section, you did flash MF3 triangle thingy -> unsolveable brick. Have to go thorugh warranty replacement.
Sent from my SGH-I337 using Tapatalk 4
the Kies Emergency firmware utility worked it put my phone like the day i bought it...also rooted it successfully and installed TWRP on it thanks guys