Hey there,
I realize there are a ton of posts about the Dell Streak being stuck at the dell logo and I've spent hours trying to read through them and try each issue.
My issue is that I'm stuck at the dell logo. Earlier today i was bored with 1.6 and was about to update to 2.1 and then eventually 2.2.
Everything went smoothly, and i was quite impressed, until i realized my SIM wasnt being recognized after i did the official O2 2.2 upgrade. I'm using a rebelsim so i thought it would work? :/ regardless, I decided it was in my best interest to just go back to 1.6 until i had time to try to get dj_steve's working. In the process of trying to revert back, i'm stuck at the logo. I even tried doing a nandroid restore from a fellow with a rogers backup on this site and I end up getting and error "Error while formatting DATADATA: !". When i try to boot the device, same old stuck logo...
I'm really out of options. i've spent hours upon hours trying so many different things and could really use a hand. If it helps, i'm on the Telus network on a Rogers streak. Before all this, everything was working except MMS.
Thanks in advance, all!
Chris
After many, MANY hours, I believe I've fixed it. Although it seemed my Streak had nothing, and I thought i had wiped it..., the only thing that worked was downgrading back to the 8105 2.1 build, which sucks in my opinion... but at least my phone isn't bricked anymore.
I am experiencing this problem. I was @ 2.2, then attempted to downgrade back to 1.6 as Rogers has released their official 2.2. Going from 2.1 Build 8105 to 1.6 Build 4399 seems to have screwed me up.
I am unable to get past the boot screen. I tried reloading the 2.1 and the 1.6 build but to no avail. HELP!!!
OK, got myself out of the stuck @ Dell Logo/Stuck at black screen during update.pkg jam.
Just QDL the sucker.
Now, how do I install the official Rogers 2.2 update after using the QDL tool?
Can I just download and install, or what do I need to do to revert back to some version to be able to install the Official Rogers 2.2 update?
eugenekim618 said:
. . . .
Now, how do I install the official Rogers 2.2 update after using the QDL tool?
Can I just download and install, or what do I need to do to revert back to some version to be able to install the Official Rogers 2.2 update?
Click to expand...
Click to collapse
Some have reverted all the way back to 1.6. There is this solution offered at Modaco.
I have an unlocked Streak, so no experience with either method.
Related
Okay, so I got bored this weekend and decided to try go go the O2 route and get eclair on my AT&T streak. I followed the steps exactly as listed via streaksmart.com. I even tried the walkthrough on modaco's site. I can get it to the O2 1.6 no problem, but when I try to update to the 2.1 rom, my screen stays black when it's supposed to be installing, for hours, and never applies. I have tried rom 8105 and 6941 with no luck. Both do the exact same thing. I have tried google-fu and searching here, among other forums. I wasn't really able to find anything. Any ideas?
I was able to upgrade to 21build 6941 following Modacos steps. Makesure you do the 4399 recovery step first via fastboot...then upgrade to 6941
Turns out I had a bad bootloader.. After reflash number 4, I was able to install with no problem. Gogo Eclair!
Ok, I just bought a Dell Streak from Rogers Wireless, it has 1.6. Seeing how this update seems to never come, I would like to get the New Froyo build on it. I have rooted a Nexus One before and got Froyo running on it before it was released so my knowledge isn't totally bad. But all these forums and post all over Modaco and XDA are really confusing me. I have no idea where to start. You know, step 1 type thing. Can anyone help me out. This is a locked, un modded streak. Ill update my progress as I go along. Thanks for any help.
Its actually not too difficult. I followed the instructions outlined here.
-http://android.modaco.com/content/dell-streak-streak-modaco-com/320025/guide-to-upgrading-and-downgrading-the-streak/-
Remove the - from the beginning and end of the comment.
Basically we go from Rogers 1.6 to o2 1.6 - then from o2 1.6 to o2 2.1 then from 2.1 to Steven's 2.2 (1.1.1 update) then to 2.2 (1.3) all the while following the instructions on how to use fastboot and recovery.
Be sure to note (i had this problem) when you finally get to 2.2, there are people including myself who have been stuck at the Dell logo on boot up. This is fixed by going into the recovery app and mounting the SD card as well as Data. This can also be fixed by a Factory Reset in the same recover options (holding left/right volume at boot)
Hope that helps.
Not Development so will move to General
One thing to keep in mind is that Although 1.3 is great its not without its issues. I'm having trouble with certain built in apps crashing (ie. Camera in HD Record mode)
Ok Im reading the guide. It looks like it will get the job done, but the guide STARTS from and ATT 1.6 or and O2 1.6, I did notic that half way through it talks about downgrading to the 1.6 O2 Rom, so would I use that method to Start from Rogers 1.6 to 02 1.6?
ok now i need help,
I did everything perfect till i got to the Froyo 2.2 (1.1.1) i couldn't for the life of me get my data to work, it just crashed everytime i put in the APN. So I reverted back to 2.1 O2, and now I can't get Clockwork recovery to come up, so i can't move forward again. When I hold the volume and power i get the 4 options. BUT when i click on the update.pkg I get a Android recovery thing in blue that was to do an emergancy recovery and the click to the camera button to start. I can't get a customer recovery back on for the life of me. Someone HELP!
MY dell streak wont go past the dell logo so after 5 hours of research i installed the stock recovery and downloaded the stock rom but when i go to install the rom it makes it half way threw and stops and gives me a error message about boot image or somthing status 7.............................................does anyone know what im doing wrong or can help me out thanks.
donnyevo4g said:
MY dell streak wont go past the dell logo so after 5 hours of research i installed the stock recovery and downloaded the stock rom but when i go to install the rom it makes it half way threw and stops and gives me a error message about boot image or somthing status 7.............................................does anyone know what im doing wrong or can help me out thanks.
Click to expand...
Click to collapse
Somebody posted something in the streak forum about a nandroid backup. When I got mine stuck at the Dell logo trying to jump from stock AT&T 1.6 to steves froyo 1.4.6, I used that to restore my phone to stock. It wasn't 100 percent at that point. I had the flashing led's and couldn't get a network signal. From there I used homies guide to upgrade my streak and flashed the o2 1.6 rom. That fixed it. I am now sporting the unlocked version of froyo on my streak.
Stick with it. Read the forums. You can fix it.
Hope that helps.
Ok im not sure what i am doing wrong but i cant seem to gor from my stock 1.6 to 02 2.1. I am following the guide found here but when i get to step 12. It goes to install gets about a quarter of the way and it just reboots. What am i doing wrong?
Not Android Development
Moving to General
Hey, I had an issue with flashing, more getting stuck on the Dell logo upon boot and not able to go any further, but I then founf this http://dellstreakhacks.com/dell-streak-2-1-downloads-how-tos-rom-superboot-recovery.html and it allowed me to flash to 2.1 stock O2 UK.
This then allowed me to flash DJ_Steve's 1.5.1 Froyo without any issues.
The above link is also the stock flash recovery (which I was looking for originally)
The guide I used to update to a custom rom was this one http://forum.xda-developers.com/showthread.php?t=872214
Hope this helps you out, I know how flustrating these things can be.
Good luck.
bought att dell streak tried upgrading with multiple means including qdl, and guide published here
so far i have successfully rooted my phone, and got clockworkmod on,
each time i load any of steve rom on my phone, i get stuck at dell logo and have to recover back to my 1.6
please help,