Hey guys, my htc sense won't launch after i update my HTC Wildfire to Froyo 2.2..
I was using stock rom for 2.1.. anyone knows how to solve this problem? :O
Try a factory reset.
Turn the power off. If your HTC Wildfire is frozen, pull the battery out and reinsert it
Hold the Volume Down button
Press and release the Power button
You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button
Press and release the Power button
Now simply confirm your decision: Volume Up for YES and Volume Down for NO
If you selected YES, all data including third-party applications will be deleted from the HTC Wildfire.
Once the wipe is complete, the phone will reboot to its factory fresh state.
Click to expand...
Click to collapse
Related
Hi all,
I have a fault with my phone that means I need to send it off to my insurance company for repair.
Now I don't want to give them any way to wriggle out of this so want to restore my phone to the factory (Orange UK) ROM..
Phone is currently running the blackstone henge rom (or whatever it's called) and has been network unlocked..
Anyone have any idea's how to?
Cheers
Will
Q. How do I perform a hard reset?
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
hard reset info for the current rom. if you want the orange stock rom on check out the rom dev section for orange roms
I'm trying to get my hd2 to stay on the tri-colored bootloader screen but it quickly goes to a white screen that says "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel".
Pressing volup and other keys does nothing. I assume this is because I have CWM installed and im using an android rom.
To clarify: I can boot CWM and my android from nand, but I am trying to run task 29 because my rom is messed up and I can't get the bootloader screen to stay. It thinks I'm trying to reset the data but I'm not.... Any help?
jeffrey92 said:
I'm trying to get my hd2 to stay on the tri-colored bootloader screen but it quickly goes to a white screen that says "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel".
Pressing volup and other keys does nothing. I assume this is because I have CWM installed and im using an android rom.
To clarify: I can boot CWM and my android from nand, but I am trying to run task 29 because my rom is messed up and I can't get the bootloader screen to stay. It thinks I'm trying to reset the data but I'm not.... Any help?
Click to expand...
Click to collapse
Vol down and power button
Thats what I'm doing and it results in what i described in the first part of my post.
ive tried all sorts of button combinations and none work
Throwin this out there but could ur vol+ button be sticking???when u do vol +/- ull get that screen
i did a button test and all the buttons work like they should, except when i press vol up nothing happens but when i press menu it registers both menu and volup
but yeah volup by itself does nothing...
In order to get to the reset screen you must be pushing the Vol Up + Vol Down + Power on. To get to bootloader it is only Vol Down + Power on. Make sure that you press at the bottom end of the Vol button.
Ok so that means my volup is stuck or malfunctioning. Any ideas on how to remedy this?
Apart from getting a service, No. Sorry.
I recently upgraded Motorola Milestone 2 with Android 2.3.4 via motorola system upgrade
Before that I had froyo android that was installed with the phone when purchased
Is it possible to get back to froyo?
with 2.3.4 too often I get this error The application Home (com.motorola.blur.home process) has stopped unexpectedly.
and gives me the Force Quit button. I tried to reset the phone but did not help.
Before the upgrade I had this version
system version 62.4.24.a953.retail.en.it
firmware 2.2.2
mils2_U6_2.4.24
Now the phone
system version 64.1.22.A935.Retail.en.IT
Android version 2.3.4
Baseband version EPU93_U_00.60.00
Kernel version 2.6.32.9-g7d2667a
Build number MILS2_U6_4.1-22
If there is a possibility to come back to froyo,
I do not know which Firmware Version should I put the phone and how to do.
Or maybe it is possible that with an identical model milestone2 purchased in the same shop at the same time which is still froyo,
backup and then do the backup I put in my phone?
(friend and I bought the same phone, it is not upgraded.)
If I missed the topic
move the post where it belongs, thanks
use a translator,
I hope to understand
You can't go back to Froyo now. Not through any backup etc.
I think you should try a data wipe. You will lose all your data after the wipe.
Power down your phone.
Power up your phone while holding the 'X' button.
You should reach a screen with '!' sign.
At this point, press vol up + Vol down simultaneously.
A recovery menu will pop up.
There will be an option to wipe data.
Scroll down using vol down.
Select 'wipe data' using camera button.
Try rebooting after that. It should boot up fine and should not give problems and errors.
I already tried it, but the problem remains
I add, the phone is in operation because of that, just annoying...i would love to be returned to the froyo or somehow solved the problem
Actually your error only looks like a launcher error. Just install some different launcher from the market like ADW or LauncherPro or Go Launcher and this will suppress the blur launcher and you should be okay.
Or you can try custom ROMs for GB kernel. There is a CM7 for GB in Dev section. You need to be rooted for that.
Sent from my MotoA953 using XDA App
Adw launcher installed, I'm going to test to see how it works
After the test:
Same thing with adw launcher. Some of the widgets in the opening, causing an error ..
The application home(process com.motorola.home) has stopped unexpectedely.Please try again....
That's weird. May be you can paste a log cat. You can get an idea as to what is going wrong. Or some one who understands that can guide you.
can't you just try CM7 from dev section.
Edit: May be it's the whole blur set up that's giving problems. You can do a data-wipe and try re-flashing the sbf using RSDLite.
Sent from my MotoA953 using XDA App
I thought to avoid Cm7 ... but if this is a solution ...
I wonder if, after a possible return to the original fw for my phone?
Here are some log
I think you should try to reflash the original 2.3.4 sbf with rsdlite and after that wipe everything from the recovery (data, cache, dalvik, batterystat...).
If it still doesn't work, try to flash another country's sbf (I'd go with one that has the same baseband settings as yours) and wipe everything too.
I know my solution may sound like killing an ant with an atomic bomb, but if a process like home crashes, it's a software problem. And there's no better way to solve a software problem than nuking the whole software on your phone and reinstall it from scratch
I'll try something like,
only to study exactly how it works .. I read the forum and ask for information
Hi,
Could it be a widget that cause force close on your launchers ?
Or a resident app, like antivirus, overclocking...
Seems strange, because I'm on official 2.3.4 without issues...
I use a standard widget, just as it was when the phone was bought nothing more is added.
Do not find a forum on how to reflesh with factory firmwer 2.3.4.
I think this is my phone MILS2_U6_4.1-22_SIGNED_USAMILESTONE2B1B8RTIT014.0R_USXMILE2GBRTIT_P011_A006_HWp2a_Service1FF.sbf.gz for Italy Retail MILS2_U6_4.1-22
just yet to find out how to do ..
fritzns said:
I recently upgraded Motorola Milestone 2 with Android 2.3.4 via motorola system upgrade
Before that I had froyo android that was installed with the phone when purchased
Is it possible to get back to froyo?
with 2.3.4 too often I get this error The application Home (com.motorola.blur.home process) has stopped unexpectedly.
and gives me the Force Quit button. I tried to reset the phone but did not help.
Before the upgrade I had this version
system version 62.4.24.a953.retail.en.it
firmware 2.2.2
mils2_U6_2.4.24
Now the phone
system version 64.1.22.A935.Retail.en.IT
Android version 2.3.4
Baseband version EPU93_U_00.60.00
Kernel version 2.6.32.9-g7d2667a
Build number MILS2_U6_4.1-22
If there is a possibility to come back to froyo,
I do not know which Firmware Version should I put the phone and how to do.
Or maybe it is possible that with an identical model milestone2 purchased in the same shop at the same time which is still froyo,
backup and then do the backup I put in my phone?
(friend and I bought the same phone, it is not upgraded.)
If I missed the topic
move the post where it belongs, thanks
use a translator,
I hope to understand
Click to expand...
Click to collapse
I bought the same phone on december in italy and I have the same problems and more: my phone reboot randomly without any reasons and sometime other app crash with the same error message.
I update the phone on 2.3.4 without change....
I did factory reset in the menù option without change....
press power button + x button on boot freeze the phone on android image screen.
I used phone without widget for some day but continue to crash and reboot.
I hope to find a solution with your help!
p.s. sorry for my bad english ;-)
I forgot to write it and for me the same thing with the power + x .. only freeze
The only way to reset my phone
from setings / privacy / factory data reset
If you see the exclamation sign screen after Power + X button, it is not freeze. On that screen you have to press both the volume keys together i.e. 'vol up + vol down'. (If that does not work try '@' key from keyboard).
Now you should have a menu with options to wipe data etc.
Finally I came to it, while pressing
vol up + vol down
thank you
When I contacted Motorola for help about my problem they sent me this guide:
1- Insert battery and power on phone while pressing "X" key on qwerty keypad - release "X" key after you see MOT batwings.
2- You should now see an ! in a triangle with Android guy. Press the "@" key on qwerty keypad to enter factory menu.
3- Use Vol Up / Vol down to navigate to "wipe data/factory reset" and then use Camera side key to select "wipe data/factory reset"
4- Use Vol Up / Vol down to navigate to "Yes - delete all user data" and then use Camera key to select "Yes - delete all user data"
5- Wait for operation to complete (maybe 1 minute or so) and then press camera key to select "reboot system now"
According to this instruction is not done nothing
This is how I did
1- Insert battery and power on phone while pressing "X" key on qwerty keypad - release "X" key after you see MOT batwings.
2- You should now see an ! in a triangle with Android guy. Press the "vol up + vol down" to enter factory menu.
3- Use Vol Up / Vol down to navigate to "wipe data/factory reset" and then use "enter" key on qwerty keypad to select "wipe data/factory reset"
4- Use Vol Up / Vol down to navigate to "Yes - delete all user data" and then use "enter" key on qwerty keypad to select "Yes - delete all user data"
5- Wait for operation to complete (maybe 1 minute or so) and then press "enter" key on qwerty keypad to select "reboot system now"
camera and "@" key - in my case does nothing
We'll see if the problem will be solved when you do the wipe data..
'@' was valid till Froyo build. For Gingerbread 'vol up + vol down' works.
Thanks sahilarora911, I press vol up + vol down and I do factory reset and format cache... the system is more stable but the login with xda app cause first system crash :-( I hope this is an isolated event.....
Sent from my MotoA953 using XDA App
After the wipe data / factory reset
my problem is solved ... 3 days without error
Thank you for help sahilarora911
Hello
I chenged my room with sbf file from RSD light and my defy+ stop on motola logo in boot menu
I try 7-8 another sbf file but in all of them stop on boot menu
Thanks for your help
Did you tried to remove the battery and put it again after 5 minutes ?
predaemil said:
Did you tried to remove the battery and put it again after 5 minutes ?
Click to expand...
Click to collapse
yes but not work,stop on motorola logo
My problem solve
Tanks from "riobenny" user for this help:
remove ur battery.
then, u must turn on ur phone by pressing power button, and volume down. hold those two button, till u find android puppet logo, and a triangle.
if previously u run eclair ---> touch the bottom screen, choose wipe data/ factory reset, and choose wipe cache. (navigation entirely using touch screen)
if previously u run froyo ---> press vol up and vol down together, choose wipe data/ factory reset, and choose wipe cache (the navigation is using vol key, to choose using power button)
after u wipe all data and cache, press REBOOT system.
but.... IMMEDIATELY after u press REBOOT, u must press vol up buttong and HOLD for around 6 seconds and then release.
after that, ur screen will show boatloader mode, and u can flash it again using FULL SBF froyo for fresh one.
esfahan_boy said:
My problem solve
Tanks from "riobenny" user for this help:
remove ur battery.
then, u must turn on ur phone by pressing power button, and volume down. hold those two button, till u find android puppet logo, and a triangle.
if previously u run eclair ---> touch the bottom screen, choose wipe data/ factory reset, and choose wipe cache. (navigation entirely using touch screen)
if previously u run froyo ---> press vol up and vol down together, choose wipe data/ factory reset, and choose wipe cache (the navigation is using vol key, to choose using power button)
after u wipe all data and cache, press REBOOT system.
but.... IMMEDIATELY after u press REBOOT, u must press vol up buttong and HOLD for around 6 seconds and then release.
after that, ur screen will show boatloader mode, and u can flash it again using FULL SBF froyo for fresh one.
Click to expand...
Click to collapse
I am glad that you fixed it. Another Defy is reborn.:good:
I have a strange issue with System Uupdate and am not sure if it's causeing my phone to be buggy.
If I check my System Updates Tab I get Last System Update: "Software not updated to G935VVRU2APB5" Failed - Mar 29 2016....error code 454
If I then go and check for new system update, I get "Your Samsung ....is up to date. No update is necessary at this time."
If I then check System update history I see "Software updated to G935VVRS2APB4 Mar 19, 2016..."
However when i check about phone my Baseband version is G935VVRU2APB5.
Anyone know what do I do to get this cleared up?
Thanks!
Since there's not really a way that I've seen to wipe cache without root, (you do have ADB but even with we don't have access to those partitions) (to the best of my knowledge) so unfortunately a factory reset is more than likely your only option.
This happened to me also. Glad I'm not the only one.
Sent from my SM-G935V using XDA-Developers mobile app
billjohnson said:
Since there's not really a way that I've seen to wipe cache without root, (you do have ADB but even with we don't have access to those partitions) (to the best of my knowledge) so unfortunately a factory reset is more than likely your only option.
Click to expand...
Click to collapse
You can wipe the cache by powering off the phone and then holding down the Volume Up, Home, and Power button until the phone vibrates. Let go of the power button but continue to hold the others. Use the volume buttons to scroll down to "Wipe Cache Partition" and press the Power button.
Hope this helps.
anderson620 said:
You can wipe the cache by powering off the phone and then holding down the Volume Up, Home, and Power button until the phone vibrates. Let go of the power button but continue to hold the others. Use the volume buttons to scroll down to "Wipe Cache Partition" and press the Power button.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the tip. I hate to have to do all this without root. Have a good day!