Database Users

I5801ddjp2

Everyone knows that the official Froyo for India is Out.
If You Are Thinking to upgrade your Firmware to I5801DDJP2 and you think Kies is not the reliable source.
Flash The rom with ODIN .
Rom Link :http://hotfile.com/dl/114560665/a896f1d/I5801DDJP2.rar.html
Odin link :http://www.multiupload.com/LFJRACWNQ2
Ops link :http://www.multiupload.com/SOMN2EWF0J
Enjoy official Firmware.
Password For the Rom is samfirmware.com

how to flash ? downloaded these things but dont know the procedure to upgrade

indiacha said:
how to flash ? downloaded these things but dont know the procedure to upgrade
Click to expand...
Click to collapse
hi
go to the devlopment section and read their is enough info on how to flash via odin look in the roll up thread it is a sticky and has all links u need to
here go to this link and read carefully : http://forum.xda-developers.com/showthread.php?t=873645

yeah just saw on samfirmware,so did anyone try it??

1. Download The froyo 2.2 Firmware Password is samfirmware.com
2 ODIN downloader
3 OPS files
4 A windows PC + samsung data cable.
5. You must install the latest kies version so that you have required drivers for samsung i5801 / i5800
6. Backup your contacts , data and apps as the process will wipe everything from your internal memory.
7. Take a note of your Firmware version by typing *#1234# incase your need to revert back later.
8. You don’t need to root your device to get this working
9. IMP: HARD RESET YOUR PHONE . MAKE SURE U HAVE ALL YOUR DATA BACKED UP. THIS WILL MAKE SURE YOU DONT HAVE ANY ISSUES WHILE UPGRADE.
STEP 1
Download all the above files listed above .
Extract all the files in the separate folder , you will get the TAR files
STEP 2
Fire up ODIN Downloader.
SELECT Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file that we have already downloaded
Select the tar package that we have downloaded
NOW EXIT ODIN.
STEP 3.
Turn OFF the Galaxy 3 and Press the following buttons together
Home + Volume Down + Power
Step 4. (crucial step)
Connect your phone with data cable and wait for windows to install the drivers.
you will get prompt – “the device is ready to use” (if you tried this before and drivers are already installed you may not get the prompt)
open and click start in ODIN DOWNLOADER again (Double check if the settings are same as before) Your phone will now show up connected in Com Port. Also make sure all files required are selected
STEP 5 This the final step
Now Click start in the ODIN and wait for the flash. Do not interrupt the connection at this stage, As your phone is flashing.
After flashing your galaxy 3 i5801 / i500 is complete , your device will reboot.
Please note it may take some some time for the first time boot. Be patient and don’t Panic.
Please Click Thanks On My Post .I want to increase my thanks Meter.

Thanks a lot shreyasharusia...just started doing it

I upgraded using kies and all of the data, contacts and apps are restored automatically. so, i think there is no need to back up.

hey anyone rooted succesfully.......I tried superoneclick but i could'nt use titanium backup....

vijacdblz said:
hey anyone rooted succesfully.......I tried superoneclick but i could'nt use titanium backup....
Click to expand...
Click to collapse
Use super one click 1.7...
Sent from my GT-I5801 using XDA App

Hey How's the battery life of this rom(i5801DDJP2) . Is it better than the JPM.

i have a doubt.
suppose i download the official firmware from samfirmware and flash with odin
and later i take it to a samsung service centre, can they find out i did NOT update with kies?

maverickgenius said:
i have a doubt.
suppose i download the official firmware from samfirmware and flash with odin
and later i take it to a samsung service centre, can they find out i did NOT update with kies?
Click to expand...
Click to collapse
No..They cant...That is how they flash
I had JPM on my phone and they couldnt figure which ROM I am using and flashed DDJP2

shreyasharusia said:
1. Download The froyo 2.2 Firmware Password is samfirmware.com
2 ODIN downloader
3 OPS files
4 A windows PC + samsung data cable.
5. You must install the latest kies version so that you have required drivers for samsung i5801 / i5800
6. Backup your contacts , data and apps as the process will wipe everything from your internal memory.
7. Take a note of your Firmware version by typing *#1234# incase your need to revert back later.
8. You don’t need to root your device to get this working
9. IMP: HARD RESET YOUR PHONE . MAKE SURE U HAVE ALL YOUR DATA BACKED UP. THIS WILL MAKE SURE YOU DONT HAVE ANY ISSUES WHILE UPGRADE.
STEP 1
Download all the above files listed above .
Extract all the files in the separate folder , you will get the TAR files
STEP 2
Fire up ODIN Downloader.
SELECT Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file that we have already downloaded
Select the tar package that we have downloaded
NOW EXIT ODIN.
STEP 3.
Turn OFF the Galaxy 3 and Press the following buttons together
Home + Volume Down + Power
Step 4. (crucial step)
Connect your phone with data cable and wait for windows to install the drivers.
you will get prompt – “the device is ready to use” (if you tried this before and drivers are already installed you may not get the prompt)
open and click start in ODIN DOWNLOADER again (Double check if the settings are same as before) Your phone will now show up connected in Com Port. Also make sure all files required are selected
STEP 5 This the final step
Now Click start in the ODIN and wait for the flash. Do not interrupt the connection at this stage, As your phone is flashing.
After flashing your galaxy 3 i5801 / i500 is complete , your device will reboot.
Please note it may take some some time for the first time boot. Be patient and don’t Panic.
Please Click Thanks On My Post .I want to increase my thanks Meter.
Click to expand...
Click to collapse
Thanks for your time out will surely help those who don't know how to
flash

jaskiratsingh said:
No..They cant...That is how they flash
I had JPM on my phone and they couldnt figure which ROM I am using and flashed DDJP2
Click to expand...
Click to collapse
you took it to a service centre or flashed with kies?
cuz i saw around here that without official eclair kies did not detect the update for the phone

maverickgenius said:
you took it to a service centre or flashed with kies?
cuz i saw around here that without official eclair kies did not detect the update for the phone
Click to expand...
Click to collapse
With JPM, Kies wouldnt update to JP2.... So i took it to service center with JPM inside, asked them to flash JP2 and they did it....

Kies flashing failed
I was trying to upgrade using kies and the flashing stuck mid way and my phone wont boot now. I tried multiple times to flash using the firmware emergency recovery built in kies but it gets stuck at the same point always (39%).
Any one faced this problem? I am downloading odin files and will try. Let me know if I shouldnt try with odin and rather take the phone to the service center.

flashing with Idiot Kies is very problematic specially if you have win 7 on your pc....I just flashed with Odin...its the better way...
Thanks to all Friends who helped me

Any comparison JPM vs JP2?

2happy2beu said:
Any comparison JPM vs JP2?
Click to expand...
Click to collapse
And a quadrant benchmark!
Sent from my GT-I5800 using XDA App

Héhéhé
Thx
Very helpful post...
Cu (gotta explore froyo ;-)

[Q] galaxy GT 9000 dead...

hello gentlemen,
I was rooting my phone, but it seems it wasnt successful. the phone kept restarting and restarting all over again.
I had version 2.3.3 on it.
and because I am not techy enough, I thought to root it again...now the phone is not booting at all...
when I switch on the phone I get a picture of a mobile and a pc and an exclamation mark between them
I can go to the download / recovery mode...
any help on how to recover my phone...
phone is Samsung galaxy S GT i9000

First of all: your Galaxy is NOT dead.
Just flash a FW with bootloader, PIT-file and Re-Partition via Odin and it will boot again.
Sent from my GT-I9000 using XDA App

My suggestion is to go to development and find the ezbase rom, it has excellent instructions with screen shots, and offers stock froyo or gingerbread with root and recovery pre installed
GTi9000 insanity cm012/glitch

Guys, I had a similar problem with my I9000T ... I was opening a game and then from out of nowhere it freeze, and then reboot... he got a lot of time stuck on the boot screen... after some time he showed a message saying that my UID was with problems... I had the I9000T on official firmware 2.3.3 (updated via kies)
Seem to happens a lot with galaxy S models, and people allways tell to download a rom and flash it with ODIN...
The problem with is that odin didn't recognize my phone... Don't know why... I have an Windows 7 64bits , installed the samsung drivers properly, but, he never get to recognize the phone on download mode... Can someone help me, give me some clue, please, I really need your help.
Thanks a lot dudes...

Lunchbox115 said:
First of all: your Galaxy is NOT dead.
Just flash a FW with bootloader, PIT-file and Re-Partition via Odin and it will boot again.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
can you please help me with a link?? I am thankful for your reply

dany khalife said:
can you please help me with a link?? I am thankful for your reply
Click to expand...
Click to collapse
http://www.samfirmware.com/
You will need to Register to be Able to download the Firmwares.
Odin (The Tool you use to Flash) And the PIT Files are on there too.
Read http://www.samfirmware.com/SVC Android/I9000 Flashguide.pdf
Before you start messing about

slaphead20 said:
My suggestion is to go to development and find the ezbase rom, it has excellent instructions with screen shots, and offers stock froyo or gingerbread with root and recovery pre installed
GTi9000 insanity cm012/glitch
Click to expand...
Click to collapse
thank you very much for this, I recovered my phone. however, two problems appeared:
1. couldnt import the .vcf file from my external SD card to the phone contacts.
2. it doesnt support arabic
can you please advise...
thanks again for your support.

dany khalife said:
thank you very much for this, I recovered my phone. however, two problems appeared:
1. couldnt import the .vcf file from my external SD card to the phone contacts.
2. it doesnt support arabic
can you please advise...
thanks again for your support.
Click to expand...
Click to collapse
Download GB 2.3.3 JPJV6 (Arabic firmware) from here: http://forum.xda-developers.com/showthread.php?t=1102881
or here :http://forum.xda-developers.com/showthread.php?t=1011901
you don't have to register and the archives are not protected by stupid passwords.
Flash: without pit or re-partition.
To root: follow the method under 'How to root...' from the second link above.

Guys, My galaxy S is still dead, I've tryied toomany roms, nothing worked... What is odd for me is that I wipe my data, format my sdcard via recovery, but all my files are still on the sdcard, and if I delete it using the USB via PC, when I boot my phone it "recovers" all the data, back to SD... someone has some tip, info, help for me?

(notes) backup official firmware

hi i opened this thread for explain how to backup your official firmware.
first downgrade your phone so that kies will detect an upgrade for you.
Now read on to see how to save the
firmware files during kies upgrade process.
On your pc, check the option
"Show hidden files"
Now connect your phone to pc via kies to begin the firmware upgrade.
Kies will begin to download the
firmware files...
The files will be saved in tmp files called "tmpA4CE.tmp" or other names
you can find it easily.
In Windows 7, this
tmp file is located at,
C:\Users\ * \AppData
\Local\Temp or type temp in run command.
(* is the pc user
session name, e.g. C:
\Users\chenna
\AppData\Local
\Temp)
When download iscomplete, kies
decompresses this tmp file into a zip folder and begins the firmware upgrading process.
The folder has same name as the tmp file but now with an extention of zipfolder.
When kies begins the upgrade process
starting from 1% until
it reaches 100%, quickly copy the "zipfolder" to your desktop.
You have about 2 to 3 minutes to do this.
Kies will delete the folder once upgrade is 100% (completed).
The "zipfolder" contains all the firmware files kies has used to upgrade
your phone.
Now you have a backup of official firmware from kies.
This is also useful in case kies fails to
complete the upgrade process.
Just use the saved files and manually flash your phone using odin or multiloader.
IF YOU LIKE THIS POST PLEASE PRESS THANKS

Could be usefull, but there are some threads out there that allready have stock firmwares listed.

this process is 100% safe and no confusion. finally you will not loose your warrenty.

WHere is downgrade file
can u plz post a link to the downgrade firmware file?

vivekdumbre said:
can u plz post a link to the downgrade firmware file?
Click to expand...
Click to collapse
go to samfirmware.com forums there you can get firmwares. they did not add recent firmware(august-2011) so downlod april firmware.
and install with odin.
you can get odin and ops in cianogenmod thread.
and finally download your region firmware. follow letter codes to find your country. for example India-dd

I already tried to downgrade so kies would recognize my phone and provide an upgrade but this failed several times. So there is no guarantee that this will work.
Sent from my GT-I5800 using XDA App

fkrone said:
I already tried to downgrade so kies would recognize my phone and provide an upgrade but this failed several times. So there is no guarantee that this will work.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
this will work.
did you check on showhidden folders?
cleanup your temporary files before start upgrade firmware.
and some times file name is different.
so first cleanup your temp. than check show hidden files than start the process.
it should work

I meant with that that kies might tell you that there is no update available. I tried this out several times with different firmwares and different CSCs.
Sent from my GT-I5800 using XDA App

fkrone said:
I meant with that that kies might tell you that there is no update available. I tried this out several times with different firmwares and different CSCs.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
kies sucks for some reason
i just flashed with odin...kies never worked for me either
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~

fkrone said:
I meant with that that kies might tell you that there is no update available. I tried this out several times with different firmwares and different CSCs.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
If you install latest firmware kies cant provode an update for you.
you have to install your region firmware only. tell me your problem with this process clearly please. i am not understanding your problem completely.

[Q] can i convert kies firmware without any file extention to odin flashable??

i have problem updating my gt-i9505 with kies.. after downloading firmware kieas brings the phone to download mode, then says pc failed to recognise mobile phone. but i could copy the downloaded ROM from C:\Users\TOSHIBA\AppData\Local\Temp\Binary\GT-I9505\XST\XX. Can i make this file odin flashable? file has no extention.. what can I do? somebody please help

Doubt it. You could always save yourself grief & just download it from Samfirmware. They have all the newer firmwares up & available on Terra now.

MistahBungle said:
Doubt it. You could always save yourself grief & just download it from Samfirmware. They have all the newer firmwares up & available on Terra now.
Click to expand...
Click to collapse
i know, but rom is 1.5GB and i have a slow internet connection.. download breaks... is there any way to solve connection problem with kies??

[Q] Galaxy Tab 4 Soft-Bricked After trying to root

Hi im new to this really i recently got the tab 4 and needed to root it so i can mirror my screen with the chrome-cast doggle for an application xbmc . I found guide on internet to use Odin to root it and ive used Odin before to root a few phones but when i tried to use the PDA option within ordin to apply the tar file that was in zip - CF-Auto-Root.tar the process started but then failed for some reason. The device then said i need to kies to emergency firmware restore but kies 3 said it does not support my device. Ive been looking for solution on net to no joy and now device must of died or somit but all i get is black screen and wont turn on. please help....

Tyandroid said:
Hi im new to this really i recently got the tab 4 and needed to root it so i can mirror my screen with the chrome-cast doggle for an application xbmc . I found guide on internet to use Odin to root it and ive used Odin before to root a few phones but when i tried to use the PDA option within ordin to apply the tar file that was in zip - CF-Auto-Root.tar the process started but then failed for some reason. The device then said i need to kies to emergency firmware restore but kies 3 said it does not support my device. Ive been looking for solution on net to no joy and now device must of died or somit but all i get is black screen and wont turn on. please help....
Click to expand...
Click to collapse
Which Tab4 do you have? Tmobile? If so I have a zip file you can use to odin back to stock. I had the same thing happen to me when I tried to root. Once it gets to that point, kies doesn't seem to function. But odin still recognizes the device. I have an SM-T337T. Let me know.

Could you post the link of the rooting method site please?
Sent from my SM-T530NU using Tapatalk

1116
magda623 said:
Which Tab4 do you have? Tmobile? If so I have a zip file you can use to odin back to stock. I had the same thing happen to me when I tried to root. Once it gets to that point, kies doesn't seem to function. But odin still recognizes the device. I have an SM-T337T. Let me know.
Click to expand...
Click to collapse
MY galaxy tab 4 is the wifi version model SM-T230 and ive been trying to get stock file even tho its at that screen where it says
Firmware upgrade uncounted an issue. please select recovery mode in kies and try again.
its still in download mode so odin will fix it in theory. i downloaded this file named ;
T230NUUEU0ANE2_T230NUXAC0ANE2_HOME.tar.md5 but think its for another model coz of the NU after T230 that never worked and been looking for my model to to avail and im still green when you come to this i feel like im out my depth.
now when i connect it to kies it says device not supported and screen flashes on off. im using a win xp machine will that make any difference aswell.
thank you

Tyandroid said:
MY galaxy tab 4 is the wifi version model SM-T230 and ive been trying to get stock file even tho its at that screen where it says
Firmware upgrade uncounted an issue. please select recovery mode in kies and try again.
its still in download mode so odin will fix it in theory. i downloaded this file named ;
T230NUUEU0ANE2_T230NUXAC0ANE2_HOME.tar.md5 but think its for another model coz of the NU after T230 that never worked and been looking for my model to to avail and im still green when you come to this i feel like im out my depth.
now when i connect it to kies it says device not supported and screen flashes on off. im using a win xp machine will that make any difference aswell.
thank you
Click to expand...
Click to collapse
Only think i've found for that firmware is a UK version. Not quite sure why there isn't a US version readily available. Anyhow, You can download it from here. The version from June might be able to be rooted using towelroot. But the May version definately can be rooted using that method. Here is the link Hope it helps.
http://www.sammobile.com/firmwares/1/?model=SM-T230&pcode=BTU#firmware