[Q] help needed connecting my imate jasjar to pc - JASJAR, XDA Exec, MDA Pro General

hey all, ive tried my best to search this site and get some help but i just dont understand why cant i connect my i-mate jasjar with the computer, i dont have the cs or any thing, i tried installing active sync4 but it wont run on my os, im using windows 7 32bit, please help me how can i connect my phone to pc via usb cable or bluetooth

For Windows 7, you need Windows Mobile Device Center, not Active Sync. Install that and it will work.

i did, it goes connecting for around a minute or two then again, connection error. please help wheather i need to update the phone or something

Related

Problem with ActiveSync! Please, HELP!

Hi everybody!
Since a few days I have my new Qtek S200 with Windows Mobile 5.0. The problem is that I can't connect it to my desk computer. I downloaded the ActiveSync 4.1 from the "Getting started" CD and tryed to connect my Qtek via USB cabel. The computer sees my device and says that is working correctly. The programs from CD are downloaded correctly (I preinstalled them a couple of times). When I start the connection it says that every port is working correctly (included USB) but the device was not detected!. I use Windows XP with 2 Pack, firewall Kerio Personal 4 and antivirus Avast 4.7 Home Edition.
I really don't know what should I do to connect correctly my device.
Please, help me giving some ideas, maybe you had the same problems and you could share with me your experiences!
My best,
Marcin
I found the problem!! It was a firewall that was blocking the connection. After disabling the firewall everythink is functioning without problems!
lucky you.
I disabled everything possible and still my Prophet does not want to connect through the USB cable after the first time.
What drives me crazy is that the first time it works ok and fast.

Universal not able to connect to the PC for SYNC--urgent PLZ

I got the new SPV 5000 as upgrade on orange and the first thing i did was unlock it using the bootloader by BUZZ from this site. Once i unlocked the phone, it works fine, everything is great. But when i try to connect it to the PC, it gives me an error, saying download Active sync 4.1 for it, I downloaded the latest 4.2 and tried to connect my universal to it, but it isnt able to connect, i dont know why..
sometimes it just gives me an error and says, check/report error and does all the status reports and stuff, but still not luck. I connected once and then when i clicked the explore button everything was blank, cant see my device or folders and nothing at all.
Please help me if someone knows the solution to it.. Cheers
Do you have another PC with which to try it out? Maybe the activesync installation or the USB drivers got corrupt.
Also, try syncing thru Bluetooth if your PC has BT. This might isolate the problem.
hello Jorgee, thanks for the reply, Yes it did work on the other PC, so does it mean that my current Pc's USB drivers are corrupt, coz the other day my USB TV stopped working on this one too. hehehe.. any solution to this PC problem
cheers mate
I find that if I'm connected to work using the Cisco VPN Client then ActiveSync won't connect, not really a big deal I guess but annoying all the same!

vista don't recognize hermes

Please note that with the "old" notebock, with vista too, i have use the Hermes without problem.
Just connect via usb and all works fine.
Now with the new notebock (same os (wm6.0 in ppc, and vista home in the notebock)) i have problems.
Vista dont recognize hermes.
so i cant connect ppc to notebock.
Some ona have idea how can i do a connection and a sync with vista.
Ps
i have install the wmdc but dosent works.
Please help.
pps
i have try to unceck enable advanced network funcionality, but when i do this i receive this error:
Fallied to disable RNDIS to use serial.
nobody can help me?
Damn
im going be crazy.
if i use internet sharing and conect the pda with notebook all works fine.
Pc find the rnids device and i can go to internet.
But if i try to sync the pc dont reconize the ppc...
welcom to the VISTA world
I've had nothing but issues with Vista and WM6 on my Hermes.
The few things I can suggest.
1) As you say Disable the Advanced networking....
2) Connect directly to a USB port, not through a hub.
3) Try soft-resetting your phone between connection attempts.
4) Remove associations between Vista and your phone.
I find that the first time I connect it everything's good, but on subsequent attempts it's hit and miss.
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
nitrocell said:
If you are using vista, there's an update for Windows Mobile software on the microsoft website.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
you need to install 6.1 for it in order for WM6 to work with vista.
Cheers
Click to expand...
Click to collapse
If he is using the same version of WM Device center on both computers and i am assuming he is, then i doubt it will fix the problem by downloading the latest version as i have that version installed on both my pc's.
I had the same problem, where windows just detected the device as an unknown device and therefore wouldnt let me sync.
right click on my computer and click manage, then plug in your device and see if you have any unknown devices appearing if you do right click on it and click uninstall then unplug the device and wait 10 seconds then plug it back in, this solved it for me. Although i still have to do this every so often. But at least it allows me to sync with both my pc's

unknown device

Hi
I have some problem whit synchronizing my p4350.
everytime when I connect my phone to my notebook (usb) vista says that he has found a unknown device.
I already reinstalled windows mobile center (2x) (with rebooting).
But my notebook still doesnt find my phone.
This is really annoning.
I am using the touch-it rom
Could someone help me?
greetings
Try changing the USB Port you use.
Also download and install the latest Windows Mobile Center v6.1 from Microsoft and try again.
Regards
also these 2 things doesn't work
anyone??
?
I still trying to connect my p4350 to my notebook but it just doesnt work.
I tried another pc and that worked :S
I also tried severel usb ports but they all give thesame alert, that my device is unknown :S

wizard & PC connect problem

Hi!
When i try to connect my wizard with PC i have mesage USB Device Not Recognised, I don't no its a problem on my wizard maby i need som files on my wizard beacuse i true to hard reset and nothing i have unlock my device and i don't no what else.
Please help me
did you try to reinstall active sync (for winXP) or windows mobile device center (for windows vista)?
this could really help.
i have same problem i uninstall activesync and still same problem

Categories

Resources