Related
Hi, I love Android on my HD2. But everytime I install a new build, the same problem is occouring everytime. And I hope that when I install a new ROM the problem will go away, this is not the case.
the problem is this, when I put the phone in lock for a short or long period of time, the phone freezes, and I have to remove the battery and restart in order to get it working again. Now, I have been trying Gingerbread, but the problem still occoured.
I am using NAND to install BTW. Also, I was told to use SETCPU to fix this issue, and set the dropbox to 'smartass' I have done this, and the problem does not go away.
Any ideas? If you can find a solution I will give you loads of thanks!
I sometimes have a slight freeze upon waking phone and cant slide unlocker but its only for a few seconds and fine after that.
Try task29 and then reflash magdlr/rom etc see if it helps in your situation.
Also what apps are you installing each time you install rom, Something may be causing issue on your phone.
The problem is not that the touch screen frozen, but that the phone will not wake, sometimes it has the blinking green LED at the top of the device.
Thanks.
TheATHEiST said:
Also what apps are you installing each time you install rom, Something may be causing issue on your phone.
Click to expand...
Click to collapse
I install TypoClock And SetCPU. Also, some marketplace apps like quadrant and advanced taskiller.
Bumpety-bump-bump.
Anyone have a solution?
D:
i take it you've also upgraded your radio version as well? when i first fiddled around with android i had the famous sod or sleep of death..wherein the device wouldn't wake up. i ugraded the radio to 2.15 and that fixed the problem. haven't had a freeze ever since.
I have the same problem. Dose any one have a solution for it?
I dose have a solution, as stated before, upgrade your radio.
Ya sounds like an outdated radio. Upgrade to 2.12.50 or 2.15.50
Robson said:
i take it you've also upgraded your radio version as well? when i first fiddled around with android i had the famous sod or sleep of death..wherein the device wouldn't wake up. i ugraded the radio to 2.15 and that fixed the problem. haven't had a freeze ever since.
Click to expand...
Click to collapse
Thanks
Upgrade the radio. It worked for me
Hi
I have a HTC HD2
and i installed andriod nand rom on it with the following things
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.12
i installed almost 10 andriod roms and find the same problem
after making or receiving a call screen goes into black screen and hangs up. i have to reboot the device by removing the battery. i would appreciate if any one can provide me the solution to fix this problem as i love andriod roms.
thank you
mohammedmazher said:
Hi
I have a HTC HD2
and i installed andriod nand rom on it with the following things
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.12
i installed almost 10 andriod roms and find the same problem
after making or receiving a call screen goes into black screen and hangs up. i have to reboot the device by removing the battery. i would appreciate if any one can provide me the solution to fix this problem as i love andriod roms.
thank you
Click to expand...
Click to collapse
I am facing this only when battery is bellow 15%. If this is the case then just charge it before it goes to 15%.
If that's not the case then you can try installl MAGLDR v1.3
Do you have this issue in Froyo or Gingerbread ROMs? or in both? What version of CWM are you using?
I have the same problem on MIUI since after approximately 1.3.18 (cutover from Froyo to Gingerbread). Also have this problem on CME DHD2 Compact.
It is also an issue if someone tries to call me.
Sometimes, if I try waking the phone from sleep (power button) and it hits the black screen, and I wait long enough, it will wake. But again, the only real fix I know is pulling the battery.
I am running MAGLDR 1.13
Also, another fix that works sometimes is plugging in the phone into a power source e.g. laptop USB port
It's something about light sensor, when you put your screen into a strong light it would be turn "unblack" again. I don't know how to fix it, is this a problem with this hardware because it's broken or my version of LEO doesn't support NAND full functionaly.
Begging for answer!
i know about my poor english
I have this problem too.. running latest Hyperdroid rom by pongster (magdlr version) and it's driving me crazy. Sometimes phone wakes up normally after a call like it shoud, sometimes is stuck with black screen for few minutes, hours even (although i can't wait that long so i pull out battery)..
Back on WinMo everything worked normally, so it's not an hardware issue with proximity/light/whatever sensors
Is there any fix out yet? I googled and searched this forum a lot and haven't found nothing much helpful, ony a couple of threads with bunch of people with same problem like me. An option for disableing those sensors would be just as good, i've tried few apps for keeping the screen awake and none of them actually worked..
Any help is appreciated.. thanks in advance.
Bump!
Anyone? :/
I have the same issue - running Gingerbread, MAGLDR 1.13
Very annoying cause everything else works super.
Temporary solution i use is to use headset / handsfree. Then there is no problem.
So experts on XDA, we are begging for a fix for this!
I have the same issue since first Android roms and never found a real solution for the problem.
Instead i found a bypass that works for me reasonably well (99% of the cases the screen turns on after a call).
I installed the following 2 applications that wakes up my screen after the call (install then enable each one):
1. Screebl - https://market.android.com/details?id=com.keyes.screebl.lite
2. Modified version of SpeakerShake - http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
I suspect this issue is somehow related to hardware failure in light sensor. Installing these programs solve this problem for me.
Also take a look on the following thread:
http://forum.xda-developers.com/showthread.php?t=835127
I have had the same thing happen to me but only around 2 or 3 times in a about 3 months of usage. Had it on both CM7 and MIUI Gingerbread ROMs regardless of battery percentage.
MAGLDR 1.13
Some users experience this using SetCPU
if you have a profile for screenoff and it's set to the lowest frequency, try to set the frequency to something above 500 MHz.
If you have smartass set as governor, then even setting the frequency to it's highest (without OC) during screenoff wouldn't change anything in battery performance, but the device will wake up faster.
Your setup works for me as well - until we`ll see a fix for it this will do
Quiethinker said:
I have the same issue since first Android roms and never found a real solution for the problem.
Instead i found a bypass that works for me reasonably well (99% of the cases the screen turns on after a call).
I installed the following 2 applications that wakes up my screen after the call (install then enable each one):
1. Screebl - https://market.android.com/details?id=com.keyes.screebl.lite
2. Modified version of SpeakerShake - http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
I suspect this issue is somehow related to hardware failure in light sensor. Installing these programs solve this problem for me.
Also take a look on the following thread:
http://forum.xda-developers.com/showthread.php?t=835127
Click to expand...
Click to collapse
Yup, this worked for my setup to - thanks!
hi guys ! i can`t realy figured out how to set it . shall i use only one app or both ? and wich settings should be ?
xanthrax said:
hi guys ! i can`t realy figured out how to set it . shall i use only one app or both ? and wich settings should be ?
Click to expand...
Click to collapse
(install then enable each one):
Click to expand...
Click to collapse
Incearca Sanity app, cauta pe Market, mie aceste doua nu mo ajutat
with me is so but only if I navigation (Navigon) and to have someone call me and then left the screen black and I can not make
try to change the kernel. that works for me
hey guys! i found the solution goin through the market!
download an app called "Sanity" theres a free version in the regular android market.
go to the settings > general > check "Reverse Proximity" (This will give you some warning about not using it if you DONT have a buggy proximity sensor). Check it anyways. Then go back to preferences then click "Proximity" scroll down and uncheck Turn off screen and leave leave the Turn on screen checked. this will force your phone to stay on during calls so that it never has to go through the proximity phase of calls this no more black screens. Hope this was helpful ^_^
Thanks!
I had this problem aswell. MIUI & Cyanogen mod were the ROMs I was using, and this problem started occuring after a few months use (my screen is also damaged from a fall, so maybe the sensors are a little damaged as well).
When I installed the WinMo 6.5 stock ROM again, everything was normal, except that my screen still turns black during calls BUT I can activate it again by pressing the power button.
Now I installed android again and the Screebl app (enabled it) and I have the same functionality! The only problem that remains is that my screen still turns black during calls, so I have to answer with the phone button and putt down phone with the power button. Still beats having to remove the battery though .
If someone has a fix for the black screen, it would be more than welcome!
But, thanks a million for the Screebl app tip! I can use my phone again .
papaganz said:
Thanks!
I had this problem aswell. MIUI & Cyanogen mod were the ROMs I was using, and this problem started occuring after a few months use (my screen is also damaged from a fall, so maybe the sensors are a little damaged as well).
When I installed the WinMo 6.5 stock ROM again, everything was normal, except that my screen still turns black during calls BUT I can activate it again by pressing the power button.
Now I installed android again and the Screebl app (enabled it) and I have the same functionality! The only problem that remains is that my screen still turns black during calls, so I have to answer with the phone button and putt down phone with the power button. Still beats having to remove the battery though .
If someone has a fix for the black screen, it would be more than welcome!
But, thanks a million for the Screebl app tip! I can use my phone again .
Click to expand...
Click to collapse
I also try with WinMobile and the problem was still there ...
I think the sensor is broken ....
I will bring my phone to service ... and when i take it back I will tell you whether it is repaired
Solution
I had the same problem with Android roms on my HD2. I saw in an other thread a member (z-o-r-r-o-, thanks btw) wrote "just clean dust on the screen, where sensor is situated". This looked like a joke to me, but it's not. On a review of the phone I found the place of the proximity sensor. This is on the top of your screen next to the speaker, on the left if you look at the screen. I just took off the protection layer of the screen and cleand the sensor and the problem was solved. So I cut of a bit from the protection layer so that the sensors arn't touched by anything.
I think the problem is that this sensor is much more sensitive with android roms.
Hope this works for you to.
Hi, guys
I have a problem with the calls. When dialing numbers and put the phone to my ear and screen turns black and doesnt lights up when I click on the screen, the end button or any other button. I tried other kernels and reinstal the rom and there is no change. It works only when I am with headset and just lights up the screen - does not close.
I'm with haldric's rom by the way http://forum.xda-developers.com/showthread.php?t=1316632 which is great.
Any suggestions ...
luba6ky said:
Hi, guys
I have a problem with the calls. When dialing numbers and put the phone to my ear and screen turns black and doesnt lights up when I click on the screen, the end button or any other button. I tried other kernels and reinstal the rom and there is no change. It works only when I am with headset and just lights up the screen - does not close.
I'm with haldric's rom by the way http://forum.xda-developers.com/showthread.php?t=1316632 which is great.
Any suggestions ...
Click to expand...
Click to collapse
Running the latest version of the rom/have you done a clean install before flashing the rom?
yz.hd said:
Running the latest version of the rom/have you done a clean install before flashing the rom?
Click to expand...
Click to collapse
Yea, But I have the same problem with older versions. Last time, before installing 2.2 I went back to WM 6.5 and started all over again with the task of 29 new recovery 5.0.2.6 ...
I tried the rom of dansta34 v2.2, but it was the same.
I have a friend with the HD2 and it has the same problem.
what i can remind you is "Restore the CPU voltage levels to standard one 1050mv (install from CWM) - if you have random phone FC. "
it's in the http://forum.xda-developers.com/showthread.php?t=1259110
althought you are not using his rom
chalienge said:
what i can remind you is "Restore the CPU voltage levels to standard one 1050mv (install from CWM) - if you have random phone FC. "
it's in the http://forum.xda-developers.com/showthread.php?t=1259110
althought you are not using his rom
Click to expand...
Click to collapse
Thanks!
Will try that way.
.......................................
oops
NVM read the OP wrong Sorry
However I do have an idea, Check your screen off settings in setCPU if you have it set to the lowest it could be struggling to work the screen and the call all at the same time.
tobiascrystal said:
NVM read the OP wrong Sorry
However I do have an idea, Check your screen off settings in setCPU if you have it set to the lowest it could be struggling to work the screen and the call all at the same time.
Click to expand...
Click to collapse
I think it's hardware problem, bacause i have the same problem when i turn back on WinMobile 6.5
... dude's in the service will tell me
hi my phone is just working 7.2 CM nand rom. ICS 4.0.4 - Htc Sense 3.5 - Cm scream rom - Miui Rom shift of the screen is in them. Usually red, vivid color screen is moving.Screen shift off color doesn't cause. Please help me.
Sorry for my english google translate
please help?
you should return to windows mobile first...
looks like a screen replacement that is not supported by our kernels
schlund said:
looks like a screen replacement that is not supported by our kernels
Click to expand...
Click to collapse
I had broken my screen repair.But it works cm7.2. ICS-HTC Sense-CM scream doesn't work. Why? What should I do?
please help me
what about old ROMs
mustafa3m said:
please help me
Click to expand...
Click to collapse
did try to switch back to SD card version of android or WM6.5??
do you have this problem yet?
tm.bax said:
do you have this problem yet?
Click to expand...
Click to collapse
yes, the problem continues
Hello there,
I recently changed from Schlund's Photonic SD Boot to CM 7.2 NAND Version, where I started having this strange issue. SD Boot worked just fine once I managed to get over the critical first 10 minutes after booting without freezing. Now the screen shifts occasionally, especially when I'm opening white windows or menus like the shutdown menu or the one where you enter a wlan security key. It stops in every position, just like mustafas picture shows. If I turn it around, the line dividing the screen just stays where it is, both frames will turn. I tried changing every single option related to the screen, flashing different versions, without gapps, without update, even [ROM] Phonerty MIUI v4 (ICS). The bug is a bit slower in this one, but still there. In all cases everything is the way it ought to be after tapping the standy button and waking it up again. But in most cases it will wont stay that way. I can't even flash it back to WM (and I don't really want to since I know how useful this little thing can be with Android on it), every RUU i tried to use told me I was using the wrong one. Any ideas? Anything new about this one?
Hello, as I said in the thread title i have a problem with the screen lock after waking up the phone. It remains stuck, until i push the power button again to close the screen, and then it's working like it should. The problem appears one at 6 or 7 times i wake the phone.
I have tried to change the screen lock method, but i get the same problem, with the pattern activated.
I have also changed two roms, so I guess this is not the issue. It is more likely that an app is the cause of this, but i have the same apps as I had on my Galaxy Nexus, so it is difficult to figure out what is the app causing this. I have paranoid android with franco kernel.
Does anyone have a clue about what the problem could be?
neinfricatu said:
Hello, as I said in the thread title i have a problem with the screen lock after waking up the phone. It remains stuck, until i push the power button again to close the screen, and then it's working like it should. The problem appears one at 6 or 7 times i wake the phone.
I have tried to change the screen lock method, but i get the same problem, with the pattern activated.
I have also changed two roms, so I guess this is not the issue. It is more likely that an app is the cause of this, but i have the same apps as I had on my Galaxy Nexus, so it is difficult to figure out what is the app causing this. I have paranoid android with franco kernel.
Does anyone have a clue about what the problem could be?
Click to expand...
Click to collapse
Hi,
Please tell me if I have well understand :
When your phone is in standby mode (screen off) and you push power button, the screen lock appear but you can't unlock it ?
That mean the screen doesn't respond some time (1 to 6-7) after wake-up the phone ?
I don't know why but I want to ask you if you have under-volted your phone ?
-JFK- said:
Hi,
Please tell me if I have well understand :
When your phone is in standby mode (screen off) and you push power button, the screen lock appear but you can't unlock it ?
That mean the screen doesn't respond some time (1 to 6-7) after wake-up the phone ?
I don't know why but I want to ask you if you have under-volted your phone ?
Click to expand...
Click to collapse
Hi, you have understand well, that is the problem i am facing. It becomes unresponsive quite often.
No, i did not change anything regarding the cpu, nor the settings in franco kernel.
neinfricatu said:
Hi, you have understand well, that is the problem i am facing. It becomes unresponsive quite often.
No, i did not change anything regarding the cpu, nor the settings in franco kernel.
Click to expand...
Click to collapse
That's strange, I have the same settings as you (PA + Franco) without any problems.
I know that Franco's Kernels are great but this is the way that I should follow to try to found the problem.
Do a full wipe and re-install PA + PA Gapp.
Don't install Franco Kernel right now and do the test with PA stock kernel.
If the test is OK, the problem come from Franco's kernel -> ask in Franco's thread
If the problem is still there -> ask in PA thread
You haven't any other problem with your touch screen ? Only with the lock screen ?
-JFK- said:
Hi,
Please tell me if I have well understand :
When your phone is in standby mode (screen off) and you push power button, the screen lock appear but you can't unlock it ?
That mean the screen doesn't respond some time (1 to 6-7) after wake-up the phone ?
I don't know why but I want to ask you if you have under-volted your phone ?
Click to expand...
Click to collapse
-JFK- said:
That's strange, I have the same settings as you (PA + Franco) without any problems.
I know that Franco's Kernels are great but this is the way that I should follow to try to found the problem.
Do a full wipe and re-install PA + PA Gapp.
Don't install Franco Kernel right now and do the test with PA stock kernel.
If the test is OK, the problem come from Franco's kernel -> ask in Franco's thread
If the problem is still there -> ask in PA thread
You haven't any other problem with your touch screen ? Only with the lock screen ?
Click to expand...
Click to collapse
Thank you, i will try the stock kernel, as I only tried franco's.
Nop, no other problem with the screen, only this one with the lock screen, and it is becoming annoying
neinfricatu said:
Thank you, i will try the stock kernel, as I only tried franco's.
Nop, no other problem with the screen, only this one with the lock screen, and it is becoming annoying
Click to expand...
Click to collapse
OK, let's go for a full wipe, I'm sure it will solve the problem.
-JFK- said:
OK, let's go for a full wipe, I'm sure it will solve the problem.
Click to expand...
Click to collapse
Hmmm, that is highly unlikely, as PA is the second rom i have tried, with rasbelly i had the same problem.
I am now trying the stock kernel.
neinfricatu said:
Hmmm, that is highly unlikely, as PA is the second rom i have tried, with rasbelly i had the same problem.
I am now trying the stock kernel.
Click to expand...
Click to collapse
Any news after the FULL wipe ?
-JFK- said:
Any news after the FULL wipe ?
Click to expand...
Click to collapse
I have flashed the stock kernel, for a while it seemed to work better, but 5 minutes ago the screen lock remained stuck again.
I have made a full wipe for the instalation of PA coming from rasbelly, one week ago, still the same problem. As I said, i am almost sure that the problem is caused by an app, but it is quite difficult to see which app is causing this....
screen unlock
Hey I had a similar problem. Do you have Lightflow installed? When I had stock everything, enabling additional LEDs including the LCD backlight had no issues. But apparently with PA and Franco kernel it switches off backlight when you unlock screen. Light flow switches it off. Try disabling that control of LCD backlight maybe? That worked for me