I live in South Korea and had my Tab rooted with the Z4 root app, but after the December update a couple weeks ago, I lost root. I tried the Z4 app again, and it gets to aquiring root shell, then closes. I also tried the other app mentioned somewhere called super easy one click, or something like that. It also didn't work.
Do I just have to wait for a new root update to come out? I am a noob and don'teven know about JMB or JMU and all that. I am just looking for an easy way to root.
Model number
SHW-M180S
Firmware Version
2.2
Baseband version
M180S DL07 0151 ST
Kernel version
2.6.32.9
root SEP-41 #1
Build number
FROYO DL08
Any help would be GREATLY appreciated. Thanks!
Hi, you can use SuperOneClick v1.5.5 to root your device
by the way , Do you have the original ROM for SHW-M180S ?
Hello. Thanks for the quick reply. Unfortunately, I don't have the original Rom. I am not even 100% sure what that means. Is that the stock software and firmware that came with my tab when I first turned it on?
I have been trying to find the original rom for days, but can't seem to find it anywhere. Do you have a link for it? If I install it, will that bring me back to 2.2? I am ready to give up 2.2.1 just so I can get my root back.
Thanks again for helping a noob!!
Successfully rooted using Super One Click!! I don't know what happened before when Obe Click didn't work, but it worked this time!! Thanks a lot Norman!!!
Step 2, start learning about this rom and flashing stuff!!!
you can find the offical full ROM in some korea forum,
just like
http://kr.samsungmobile.com/service/support/down/anycall.software.view.do?modelCd=SHW-M110S
http://people.sarang.net/
if you found it ,told me ,oK?
thanks
my email: [email protected]
Galaxy Tab spare parts problem and root help
deadhead85 said:
Successfully rooted using Super One Click!! I don't know what happened before when Obe Click didn't work, but it worked this time!! Thanks a lot Norman!!!
Step 2, start learning about this rom and flashing stuff!!!
Click to expand...
Click to collapse
Hi to all,
I am also living in South Korea in Jinju. I have just bought my galaxy tab last week. I have downloaded some games but I could not make them full screen than I found that by using spare parts, it is possible to make the applications and games full screen. However, spare parts app which I downloaded from market did not work properly in my tab.
My first question, why spare parts do not work in my tab???
Secondly, I had the same error while rooting with z4root. Could you please give more detailed information how did you succeed to root your device?
Regards,
Cagri
U.cagri dogan said:
Hi to all,
I am also living in South Korea in Jinju. I have just bought my galaxy tab last week. I have downloaded some games but I could not make them full screen than I found that by using spare parts, it is possible to make the applications and games full screen. However, spare parts app which I downloaded from market did not work properly in my tab.
My first question, why spare parts do not work in my tab???
Secondly, I had the same error while rooting with z4root. Could you please give more detailed information how did you succeed to root your device?
Regards,
Cagri
Click to expand...
Click to collapse
Dear U.cagri dogan,
Eventhough spareparts makes some applications or games scale to full screen, most of these scaled games have compatibility issues with touch controls. According to me, spare parts is mostly useless for the games but maybe a few games are compatible like PSX4DROID.
For native full screen games list for TAB, please refer to this thread:
http://forum.xda-developers.com/showthread.php?t=897901
I use SuperOneClickV55 to ROOT my TAB. Follow the instructions below to root with SuperOneClick.
1- Go to Phone Settings-Applications-Development and CHECK " USB Debugging "
2- Connect USB cable both Phone and PC and wait till PC installs some drives.
3- Run SuperOneClick
4- Click to Root Button and done after a few automatic process.
5- Unplug USB Cable and reboot device. ( optional )
6- Go to Phone Settings-Applications-Development and UNCHECK " USB Debugging "
7- Download BusyBox from market
8- Run busybox and give permission when SuperUser asks for it.
9- In Busy Box, Choose version 1.7.0.1 and install.
10- Your device is full rooted now.
Hope this helps...
Kind Regards,
Normanxiao said:
you can find the offical full ROM in some korea forum,
just like
http://kr.samsungmobile.com/service/support/down/anycall.software.view.do?modelCd=SHW-M110S
http://people.sarang.net/
if you found it ,told me ,oK?
thanks
my email: [email protected]
Click to expand...
Click to collapse
Hi Normanxio!
I can't seem to find the official ROM in the Korean forum you linked. Can you be so kind and post a link to the firmware? I have bricked my SHW-M180S Galaxy Tab (the korean version) and can't find the firmware anywhere...
Thanks in advance!
Really Russian lang. for it?
Root Problem in my SHW-M180
Hi, I want to root my SHW-M180 Galaxy Tab, but unsuccessful in everyway.
i've tried SuperOneClick, Z4Root etc.
my specs is:
Samsung Galaxy Tab
Firware version: 2.3.6
Baseband version: M180S.FE18.1503.ST
Kernel Version: 2.6.35.7
Build number: GINGERBREAD.UF08
Is there anyway to gain Root permission in this device?
thank you.
try gingerbreak?
http://forum.xda-developers.com/showthread.php?t=1044765
I tried it. I tried it thrice.
I used gingerbreak 1.20
My 1 try took 1 hour (got bored), Rebooted, then tried again for 1 hour then rebooted manually, then tried again.
No luck so far.
Sent from my SHW-M180S using xda app-developers app
Original rom
I have the SHW-m180s original rom IM me :cyclops:
Dulguun_SJ said:
I have the SHW-m180s original rom IM me :cyclops:
Click to expand...
Click to collapse
Please also send me the link to download SHW-M180S original rom... I also need it urgent.
sheikh_sohaib said:
Please also send me the link to download SHW-M180S original rom... I also need it urgent.
Click to expand...
Click to collapse
Have you tried looking for it at sammobile.com?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Related
Hello, I'm a noob here as you can tell. xD
I've been trying to root my phone in order to install the app2sd and other 3rd party apps and root apps
.apk but since att phones can't install 3rd party apps, I can't manage to install the Androot app.
How can i bypass this?
Is there a simple way?
hey! i was in your spot not too long ago (about being a n00b.)
the easiest thing you can do is:
1) go to the android central sideload wonder machine. (google it)
2) install universal androot.apk (again, google is your best friend! )
3) Follow the steps. Install with superusser!
If you need more help, PM me.
Remember, if i helped you, PLEASE click thanks.
SWM doesn't seem to work
it doesnt detect my phone!
My PC either when I plug the phone in, even when I installed recent drivers from the MOTO website.
What am I able to todo?
UPDATE**
Found the problem, the USB cable I was using was chage only
didn't transfer data >_<
Haha, are we good now?
rockstarar said:
hey! i was in your spot not too long ago (about being a n00b.)
the easiest thing you can do is:
1) go to the android central sideload wonder machine. (google it)
2) install universal androot.apk (again, google is your best friend! )
3) Follow the steps. Install with superusser!
If you need more help, PM me.
Remember, if i helped you, PLEASE click thanks.
Click to expand...
Click to collapse
Thanks for this resource!
Sent from my SPH-D700 using Tapatalk
No problem
Sent from my HTC Glacier using XDA App
I rooted the flipout using the file from this post
http://forum.xda-developers.com/showpost.php?p=14253085&postcount=2
which is this attachment:
http://forum.xda-developers.com/attachment.php?attachmentid=489694&d=1295035181
I believe it's an older version of SuperOneClick that works OK with android 2.1 that flipout has
I had problems using SuperOneClick, so I did it using an older version of UniversalAndroot which I used for my other phone. You download it straight to your phone by accessing this link tinyurl.com/urooted.
how do you UNroot a device?
I though that by restoring to factory defaults the root would be gone but i was wrong!
can any one help me in rooting motorola CHARM
can we root motorola charm using super one click
Hey guys,
I'm a new user here but I've been reading allot in the past 1 and 1/2 since when I got my first Android which was a HTC Wildfire.
I never had major problems regarding upgrade and rooting procedures but now I have a weird one.
After upgrading my Galaxy 3 (I5800) to FroYo, I've downloaded the Galaxy S I9000 One-Click Root program intending to root my phone.
Once I run the software, it gives me a a popup error message that says:
The application failed to initialize properly (0x000007b). Click on OK to terminate the application.
As anyone else here would do, I went straight to google and search for the message itself and also for the error code. With no luck, I couldn't find anything reasonable to fix it.
Note that this message happens of Windows XP SP3 and also on my Windows 7 Ultimate.
I'm just running out of ideas guys.
Have anyone here seen this error or heard about it? I search here on the forum for that code and there's nothing matching at this point.
I would appreciate if anyone here can help me.
I can take a screenshot if needed.
Cheers
Fred Kaiser
I'm not on a computer, but I believe you downloaded the wrong one.
Sent from my Samsung Galaxy 3 FROYO
Did you download from the Galaxy 3 Development section?
Sent from my Samsung Galaxy 3 FROYO
Those are the steps I've followed in the link bellow. I couldn't find the z4root on the market and if I download it from the internet, I suppose I need the phone rooted in order to install the app, or not?
http://forum.xda-developers.com/showthread.php?t=778880
I had same problem
One click and z4 don't seem to work for 5800 froyo
Use super one click.
it worked for me
Sent from my GT-I5800 using XDA App
good stuff... this Super One-Click worked pretty sweet... it says that my phone is rooted and the SU test passed. I guess I can start having fun with my phone now!!! hehehe
thanks guys +1 for both of you!
cheers
I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted.
Lol and don't forget tto tell people how to get to clock work mod! Wait do you even know how to? Not trying to be mean bro.
Sent from my SGH-T959 using XDA App
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Been a while but look at the modified 3e recovery in the development section ...or you can odin back to jfd and root from there
Sent from my SGH-T959 using XDA App
lotusandstone said:
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Click to expand...
Click to collapse
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Thanks, guy, I'm ok with what I have right now, made this post as I thought it maybe can help someone like me,not very expert.
^ try some of my guides.
HG! said:
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Click to expand...
Click to collapse
Lol no that is not how you do it! You have to have a modified 3e recovery first then you can start flashing things its not as easy as that. Since the 3e recovery checks update.zip you cannot flash clockworkmod that easily you can do it on jfd that easy but not an update which has a 3e recovery!
Sent from my SGH-T959 using XDA App
well how do you flash CMD on 2.2.1 then?
Just wanted to give a quick thank you as this worked perfectly for me! The 2.2 version of super-one-click constantly had me hanging but I'm glad to have found this older version and it worked like a charm
Nope did not work: UVKB5: V1.9.1 "Failed" - V2.2 - Hangs.
wHERE are they right instructions step by step? dont want to make mistake
thanks
If all you are wanting to do is Root the phone, then look in the Q&A stickie for the Noob Guide. Has a flashable Rooter right there. If you can't find it, click the link in my signature.
I have never been able to get Superoneclick to work on any phone I have tried, for various reasons but still...
AIO Vibrant Toolbox
'nuff said.
Yes, it works!
lotusandstone said:
"I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted."
Click to expand...
Click to collapse
Thank you for this info.
I just spent a day trying to root my Galaxy S Vibrant using SuperOneClickv2.3.3 (after having it updated to Froyo 2.2). It did not work, no matter what I tried.
Finally, I came accross your post, googled for SuperOneClickv1.9.1, dowloaded and followed your instructions. It worked like a charm.
Once again, THANK YOU!
please ignore my stupidity. I've tried to search a solution for this but was unable to. So i got the galaxy tab last night, hooked up to kies and updated it to 2.3.3 and so I downloaded Super one click 2.1.1 for gingerbreak but i got stuck on step#6 and after that the not responding error on the windows. Can I have any help from you guys cus i really need to to root and then install all those nice roms on my devce. Thanks so much.
Please can anyone help please.
Sent from my GT-P1000R using XDA App
got it.. pls close thread and thanx so much for all of ur help.
use cf-root v3.3 sir. and your ok
junooni.1980 said:
got it.. pls close thread and thanx so much for all of ur help.
Click to expand...
Click to collapse
I hate when people do this. If you find the solution, post it before closing the topic.
totally.
solution should always be posted, even you found it on your own
just to show you that not all noobs ***
just need a bit of patience searching for solution
plus, it should help the next guy trying to root
ie. me
incidentally, could one of you guys direct me.
helping one of my friends with:
firmware 2.3.3
baseband P1000DXJPC
Build No. GINGERBREAD.DXJPC
tried [URL="[http://forum.xda-developers.com/showthread.php?t=885734&highlight=gingerbread+root] CF-Root v3.3 JJ*, JM*, KA*, JQ1 - su+busybox+CWM3/RFS[/URL]
unsuccessfulllllll..............
milkboy007 said:
totally.
solution should always be posted, even you found it on your own
just to show you that not all noobs ***
just need a bit of patience searching for solution
plus, it should help the next guy trying to root
ie. me
incidentally, could one of you guys direct me.
helping one of my friends with:
firmware 2.3.3
baseband P1000DXJPC
Build No. GINGERBREAD.DXJPC
tried [URL="[http://forum.xda-developers.com/showthread.php?t=885734&highlight=gingerbread+root] CF-Root v3.3 JJ*, JM*, KA*, JQ1 - su+busybox+CWM3/RFS[/URL]
unsuccessfulllllll..............
Click to expand...
Click to collapse
A couple of hours ago I helped my friend update his Tab and rooted successfully.
We downloaded firmware P1000DXJPC from www.samfirmware.com and successfully flashed to DXJPC. After rebooting, the Tab's build was essentially similar to your friend's. From that point, here's what we did:
1) Downloaded CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.zip and flashed using ODIN.
2) Rebooted
3) Updated to Superuser 3.0 via the Market
4) Loaded up the Superuser app, open the Preferences and updated Su binary to v3.0
5) Extracted zImage from the earlier downloaded DXJPC firmware and using ADB, pushed to /sdcard/
6) Used the CWM app to flash the kernel back to DXJPC
7) Done.
Hy guys.
I am a new user of a superb device....htc desire hd...just sold my old samsung galaxy s and this hys is by far better than sgs
I am now trying to update or root this one
The build is 2.50.61.3 and i am somewhat scared of the ace hack kit...of bricking my device
Is it safe ?
I am from romania amd the carrier is vodafone...and just want a clean and stock build ...rooted
How can i do this ? I did the topics...and forums for this and anyone said that it is ok but if it will het bricked ? Is there anyway to unbrick it ? It is out of warranty...
Best regards
Sent from my Desire HD using xda premium
You are on the right path of glory...
Just find the correct method and tools for doing it. And after that u can choose a lot of beautiful and great rom here. Good luck mate.
http://forum.xda-developers.com/showthread.php?t=905003
http://forum.xda-developers.com/showthread.php?t=841076
this is the guide I used , downgrade then root with visionary and go from there ! I was a total noob when I used this, so you should be fine mate !
Just use the Ace Hack Kit http://forum.xda-developers.com/show....php?t=1259821 . It downgraded me, then rooted me, all automatically. Fantastic!
But remember to properly read the "effen manual" there is a password that you have to enter which makes sure that you read the full manual (its only a couple of pages). After running this a couple of times (once to downgrade then again to root), just install your preferred ROM. I just rooted for the first time myself yesterday. Easy as pie with this method.
ozaghloul said:
Just use the Ace Hack Kit http://forum.xda-developers.com/show....php?t=1259821 . It downgraded me, then rooted me, all automatically. Fantastic!
But remember to properly read the "effen manual" there is a password that you have to enter which makes sure that you read the full manual (its only a couple of pages). After running this a couple of times (once to downgrade then again to root), just install your preferred ROM. I just rooted for the first time myself yesterday. Easy as pie with this method.
Click to expand...
Click to collapse
Cannot recommend this enough! I did it with my Ubuntu laptop and there were no driver installations necessary. It was literally a couple clicks.
105802 said:
http://forum.xda-developers.com/showthread.php?t=905003
http://forum.xda-developers.com/showthread.php?t=841076
this is the guide I used , downgrade then root with visionary and go from there ! I was a total noob when I used this, so you should be fine mate !
Click to expand...
Click to collapse
about goldcard... my phone is carrier unlocked but i think the rom it's branded for Orange... i still need to make myself a goldcard ?
and when entering the menu with vol down + power.. i see up there a S-OFF... and i think the ace kit was already used...it's safe to use the ace kit.. no ?
i forgot the say that it's sim unlock and running a 2.3.3 gingerbread with 2.1 sense.
I think it's already S-OFF and super CID made... i just need to root it and get to a good stock or a very good moded version of rom
Updated and installed a new Rom
U guys r great !
Enjoy it! Now that you are rooted:
- You can uninstall (freeze) system applications you never use.
- You are now able to use MyBackPro or Titanium Pro to back your applications and settings. (This makes changing roms painless)
- You can now also use Market Enabler and use the US, UK, or any other market.
- Depending on your rom you can also start enjoying two way call recording.
Thanks man