A couple of weeks ago I bought a Galaxy Tab GT-P 1000 in Holland.
if I press *#1234# then it shows:
PDA: P1000XWJJ3
PHONE: P1000XXJID
CSC: P1000OXXJJ2
When i used Kies in Holland, then I cant get an update. Now I am in Thailand and also no updates.
So what to do now?
Install "Check Fus" from the Market. It will show you if there's any updates for your specific phone.
Related
Today here in The Netherlands I was offered a software update, the first since JJ3. About device says it's Froyo 2.2 build XWJMK, with baseband XJMA, and kernel 2.6.32.9. *#1234# says the following:
PDA: P1000XWJMK
PHONE: P1000XXJMA
CSC: P1000PHNJM5
I'm guessing it's the same as samfirmware.com's JMK. But hey, it's official, and will update without flashing just using Kies, and as such should be fully supported by Samsung. It's of course still Froyo, and not the hoped for Gingerbread.
Superoneclick rooted it succesfully. Bootloader Patch reported a signed bootloader, but had no problem unlocking it. Great job, guys!
what type of tab is yours (sales code - CPW, XEU etc - cant remember the code to find out)
*#*#44336#*#* says CSC: P1000PHNMJM5. *#272*IMEI# says PHN. It also says Build time: 2011.02.22 11:01:46 KST. Changelist: 900323.
Can you extract the modem.bin?
Hm, this is a Kies update, so I'm not sure where and if it dropped an update file containing modem.bin. However, it may well be the same JMK update as that on samfirmware's site. I just checked and that one does have a modem.bin. It's even PHN.
Today, finally, i have received new update JRO03C.XXDLJ4, android version 4.1.1 via Kies.
It's available via OTA too but there are too many downloads so you'll wait.
I know there is new Poland firmware based on 4.1.2 but i was waiting for that update for my unbranded Hungary firmware (i'm in Italy ). That's just an info for who interested, no other. It's not reported elsewhere.
Info about phone:
Code:
Radio: I9300XXDLID
Android Version: 4.1.1
Build: JRO03C.I9300XXDLJ4
See you.
i was also XEH originally, but since i saw that XEH update is really late comparing to other csc-s, i changed csc to SEE and got LJ4 update month ago
bojler said:
i was also XEH originally, but since i saw that XEH update is really late comparing to other csc-s, i changed csc to SEE and got LJ4 update month ago
Click to expand...
Click to collapse
You're right, but better late then never, or not?
I am new at all of this. So excuse me, I have recently purchased a GT-i9505 and was wondering what the newest firmware is for my version.
I cannot move my apps to SD card and I believe I have the old firmware as
PDA: i9505XXUAMDM
CSC: i9505OXXAMDB
I have tried Kies update and it says it is latest firmware PDA: MDM, Phone: MDM, CSC: MDB (BTU)
I am in the United Kingdom, and as far as I am aware it originated here as it came with a 3 pin plug. It is also unlocked and free of branding.
Why is the new firmware MGA not on my phone or on update? How do I get it, as I am running lower on room on my phone everyday.
Thank you
jamieostrich said:
I am new at all of this. So excuse me, I have recently purchased a GT-i9505 and was wondering what the newest firmware is for my version.
I cannot move my apps to SD card and I believe I have the old firmware as
PDA: i9505XXUAMDM
CSC: i9505OXXAMDB
I have tried Kies update and it says it is latest firmware PDA: MDM, Phone: MDM, CSC: MDB (BTU)
I am in the United Kingdom, and as far as I am aware it originated here as it came with a 3 pin plug. It is also unlocked and free of branding.
Why is the new firmware MGA not on my phone or on update? How do I get it, as I am running lower on room on my phone everyday.
Thank you
Click to expand...
Click to collapse
Here bro http://www.hotfile.com/dl/235905226/e7bdf1a/I9505XXUBMGA_I9505OXXBMG3_BTU.zip.html. Flash this MGA rom with Odin. See item 1 im my signature for how to. This is the latest version atm. For moving apps you need root.
Hi
My friend just purchased a Note 3 from an Amazon reseller, and it turns out to be a grey import. He asked me to take a look to see if the phone was legit as it had Chinese language by default. I quickly discovered that although the box says 'Made in France', the device has arrive with Hong Kong firmware on it (TGY) as follows...
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
AP: N9005ZHUBMI7
CP: N9005XXUBMI5
CSC: N9005ZZHBMI7
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MK1 PHONE:MJ94 CSC:MK1 (TGY)
Has anyone successfully manage to flash the firmware/baseband and changed the CSC to UK unbranded (BTU) without bricking the phone. I have suggested he returns it as he'll trip the KNOX flag doing this, and Samsung don't entertain the warranty if its from another region.
Can it be done?
**Update: I sold my S4 for a Z1 due to the impending KNOX/Activation lockout stuff Samsung were introducing
I have installed this firmware: N910FXXU1COJ3_N910FBTU1COI1_BTU from sammobile
I have a note 4 that is unlocked and based in the UK, it was purchased new off amazon. My original CSC code was BTU but my active one is XEC/BTU. Should I be worried and should I try to change it.
When I type the serial number into kies I am told PDA: OK2/ CSC: OJ2/ PHONE: OK1 (XEC). However XEC is for spanish phones which mine is not.
How can I get my device back to its original state when it was first purchased?