I have used this for JPU/JPX firmwares and various 2.2 firmwares.
Before doing ANY upgrades make sure you can get into recovery mode and you have backed up anything you want to keep (I suggest Titanium Backup)
Needed:
1) Oidin 1.3 - http://www.multiupload.com/4JLU4QHUV7
2) Pit 512 (Others are for 2.1 I think) - http://www.multiupload.com/I5WICSBFJ1
3) Firmware File - http://www.samfirmware.com/WEBPROTECT-i9000.htm
(All links are from samfirmwares.com)
Things to check:
Does your download have 1 or 3 files?
Make sure you extract your files and they are either "tar" or "md5" files. "rar" files will need to be extracted before you can use them.
If it has 1 file then:
- Open Oidin Click "PDA" Select your file.
- DO NOT select re-partition and DO NOT use pit.
- Click Start
If it has 3 files then:
- Open Oidin
- Click PDA and select PDA File
- Click Phone and Select MODEM File
- Click CSC and Select CSC File
(The Files will have Phone/Modem/CSC in the file name)
- Click PIT and select 512.pit file
- Tick "Re-Partition"
- Click Start
Notes:
On every flash I ALWAYS "wipe data/factory reset", "wipe cache partition" and "format internal sd-card" in Recovery Mode.
This is a personal preference, but I like the "New Phone" feel
To do this I:
- Flash the phone with Oidin
- Wait till it boots up fully the first time.
- Remove The Battery
- Hold Power/Home/Volume Up and reinsert battery
- As soon as the yellow text appears let go of all keys
- Use Volume Up/Down to move, Home to select
If you get a "E:Can't mount dev\block\st110" error when flashing JPX I had to flash the 3 file JPU first, boot once then flash JPX again and that fixed my problem.
Nice post. Been my method too and phone works perfectly
Related
I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1
I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Guys, any one ? i Badly need the new ops file and the procedure as the phone is very unstable...
I would use the Samdroid forum, they should be able to help.
I have a Spica and it verty stable (and fast) using CM 8.3.2 and Yonip V12 kernel.
boxy44 said:
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Click to expand...
Click to collapse
1. You need spica_jc3.ops- here is the correct one (if it downloads as .ops.txt just remove .txt)
2.Firmware file should be named i5700XXJH1.tar or in a similar manner.
SS_DL.dll must remain in the same directory where .tar firmware is located
a) put the phone to download mode and connect USB cable
b)start Odin and see if the phone is found- in top left field you should se COM port number. If there isn't- check in Device Manager if drivers are correctly installed
c) load spica_jc3.ops as OPS file and firmware as One Package file
d) select OnePackage option, leave other options as they are- Reset Timer, Protect Ops and Reset Timer (300) should be selected by default
e) click Start button, don't touch the phone and PC, sti back and wait
f) when flashing is done phone will reboot, you can safely unplug USB and close Odin
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
itworks78 said:
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
Click to expand...
Click to collapse
This is a Development section not a Q&A section. There's another section for this.
I have faced it myself, and somehow I fixed it by myself. Since it fails on Hidden.img, my mind clicked.
Here are the steps:
1 - Download your Stock FW, its file extension should be '.zip'.
2 - Extract it anywhere you like, then you get the PDA file which its extension is '.md5'.
3 - Flash it, and wait till it Fails.
3 - Double click to open the .md5 file and choose WinRAR.
4 - There you will find boot.img, system.img and other files, but you will also find the hidden.img.
5 - Extract hidden.img to your desktop and then rename it as hidden.img.tar.
6 - Import hidden.img.tar into ODIN in the PDA tab.
7 - Finally, restart your device into Download Mode, then flash it.
If you have any issues, feel free to ask.
Kazzko said:
I have faced it myself, and somehow I fixed it by myself. Since it fails on Hidden.img, my mind clicked.
Here are the steps:
1 - Download your Stock FW, its file extension should be '.zip'.
2 - Extract it anywhere you like, then you get the PDA file which its extension is '.md5'.
3 - Flash it, and wait till it Fails.
3 - Double click to open the .md5 file and choose WinRAR.
4 - There you will find boot.img, system.img and other files, but you will also find the hidden.img.
5 - Extract hidden.img to your desktop and then rename it as hidden.img.tar.
6 - Import hidden.img.tar into ODIN in the PDA tab.
7 - Finally, restart your device into Download Mode, then flash it.
If you have any issues, feel free to ask.
Click to expand...
Click to collapse
thank you my friend. i almost create a new thread about that problem. appreciate
HwOTA for Huawei P9 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
vovan1982 said:
HwOTA for Huawei P9 Lite1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hi, ", it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip" - doesn't work. Is it possible to manually rename files?
Edit: It was my stupidity , everything works fine, thank you !!!
where do I download the firmware files by the way?
there are lots of errors,
there are conflicts in folder names and script paths
Error
there are errors
it's can't run
can you fix it
Hello
took advantage of this solution, to restore your device properly. :fingers-crossed:
I tested it, it works correctly at 200%. :good:
SOURCE forum XDA Mate 10 lite.
**https://forum.xda-developers.com/ma...development/hwota-huawei-mate10-lite-t3777115
HwOTA for Huawei Mate 10 Lite
1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There's no way around it (unfortnuately), but do not worry again! The device will make a factory reset, so once again, BACKUP your files !!!!!!!!!!
3. Enable 'USB debugging' and 'OEM Unlock' option from setting> developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. must to download for the version which model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA \ Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full _.... zip to update_all_hw.zip
- update.zip do not rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware / rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the whole process is accompanied by prompts.
At the end of the process, everything should work fine ... Be prepared, the bootloader will be locked to fulltext or firmware as a FullOTA.
7. If suddenly it turns out "bootloop" - go into the recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware files with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English !!!