Recently a new firmware P1000JVJL1 showed up under the Arabic section at samfirmware.com, but it was confirmed that it was NOT an arabic firmware but euro instead.
So I flashed it just to feed my curiosity and it was true. Euro definitely, had Turkish locale too, but that uses normal English lettering.
http://www.samfirmware.com/WEBPROTECT-p1000.htm
Wow another firmware, who said samsung was slow on firmware releases!! I take it this is the latest version, notice any changes and did it wipe everything?
hi!! thanks for the news, olny one question, does this version have italian language and will i have problem upgrading from jma to this?? i've update to jma and would like to know if there will be any problem...thanks in advance..
xoltrix2000 said:
Recently a new firmware P1000JVJL1 showed up under the Arabic section at samfirmware.com, but it was confirmed that it was NOT an arabic firmware but euro instead.
So I flashed it just to feed my curiosity and it was true. Euro definitely, had Turkish locale too, but that uses normal English lettering.
http://www.samfirmware.com/WEBPROTECT-p1000.htm
Click to expand...
Click to collapse
if i remember right, then is JV for the region
the following j for 2010
the following l is the month (were we have actually m in the jma version)
and the 1 is version one.
so i don´t really see were this firmware should be a newer one than xxjma
abuser0815 said:
so i don´t really see were this firmware should be a newer one than xxjma
Click to expand...
Click to collapse
As far as I'm aware the M builds are test builds and not formal releases.
An L would indicate a December build, so it is quite possible it is newer than JMA.
Regards,
Dave
foxmeister said:
As far as I'm aware the M builds are test builds and not formal releases.
An L would indicate a December build, so it is quite possible it is newer than JMA.
Regards,
Dave
Click to expand...
Click to collapse
jma was also released in december, so who says that is a newer version, and from where it cames thats an euro version? if it has turkish on board and english lettering, that says nothing. any other languages in?
Any chance you checked what the build date on this one was and what CSCs it includes?
abuser0815 said:
jma was also released in december, so who says that is a newer version, and from where it cames thats an euro version?
Click to expand...
Click to collapse
I said that it was "quite possible" that it's newer than JMA, not that it is definitely newer.
Consider the following - JMA is a development build (we know this). At some point that development build will get completed and released, and when it does it ceases to be an "M" build and will follow the conventional naming sequence. If that build is released in December, it will be an L build.
It remains to be seen what this actually is, but we certainly shouldn't discount it based on there being an M build in existence.
Regards,
Dave
i´m downloading it. will see what it says on my tab and if the build date is newer than jma.
will report later....
abuser0815 said:
i´m downloading it. will see what it says on my tab and if the build date is newer than jma.
will report later....
Click to expand...
Click to collapse
Am doing the same now.
Should I continue?
The filesystem dates of the flashable files seem to indicate that JMA is newer, and the build numbers confirm that assumption: 759588 > 739553 (07/12/2010 > 01/12/2010)
deezid said:
Am doing the same now.
Should I continue?
Click to expand...
Click to collapse
you can stop it if you want.
i think this firmware is not newer as jma, as file dates are from 30.nov / 1.dec.
jma files are newer. for that i will not flash it to my tab unless somebody really proofes me that:
a) its a newer version,
and
b) its an euro-version.
Ok tried it
This firmware is for the turkish tablet and it doesn't contain the fixed browser (introduced in JM6)
Dennis
abuser0815 said:
for that i will not flash it to my tab unless somebody really proofes me that:
a) its a newer version,
and
b) its an euro-version.
Click to expand...
Click to collapse
Read the post just above yours (info extracted directly from mounted RFS filesystem).
Darn, was hoping it was the released version of JMA!
daniel.weck said:
Read the post just above yours (info extracted directly from mounted RFS filesystem).
Click to expand...
Click to collapse
we wrote our posts at the same time, so i´ve readen it after i posted
foxmeister said:
As far as I'm aware the M builds are test builds and not formal releases.
An L would indicate a December build, so it is quite possible it is newer than JMA.
Regards,
Dave
Click to expand...
Click to collapse
Traditionally, Milestone and Prototype are internal. However in the SGS series we have repeatedly seen them on "production" releases (yes, both M and P).
In truth it is now hardly possible to compare newness based on name alone. There have been instances where (x) has been newer than (z) as well. Not to mention the last character can only be compared if comparing to the exact same region and product codes.
Related
Everytime I try to update my GT I receive a msg saying "This version cannot be updated". I tried updating kies, still the same, restored the tab to default and removed root, still the same, used the *272* to change locale, also still the same. Any idea what the solution might be?
My baseband version is: P1000JXJK2
Sent from my GT-P1000 using XDA App
You didn't actually state which version you are currently running!
Regards,
Dave
foxmeister said:
You didn't actually state which version you are currently running!
Regards,
Dave
Click to expand...
Click to collapse
My baseband version is: P1000JXJK2
Anyone? Anything?
It is quite possible that JK2 is the latest official version for your region. I believe that the latest official version on UK Tabs is a JJ version which would be older than yours.
Regards,
Dave
yes, i got a JID since november and still the same on kies, "this version cannot be updated"
... no updates, while there should be evident bug fixes for that "bending gsensor"
thank samsung for that
foxmeister said:
It is quite possible that JK2 is the latest official version for your region. I believe that the latest official version on UK Tabs is a JJ version which would be older than yours.
Regards,
Dave
Click to expand...
Click to collapse
According to samfirmware: http://www.samfirmware.com/WEBPROTECT-p1000.htm
there are newer builds for my region (arabic).
In the old Kies it said that there's an update but your version can't be upgraded :0(
Just because a firmware is listed on samfirmware, doesn't mean that Samsung have pushed them out via Kies.
Looking at the list of Arabic ROMs on samfireware, I can see that there are several JMx builds - as far as I am aware, none of the JMx builds have ever been pushed out by Kies and are considered development test builds.
That leaves JVJL1 as the only later build, but this thread would indicate that isn't actually an Arabic ROM at all and thus wouldn't have been pushed out to Arabic Tabs.
Regards,
Dave
i have seen jma in the wild in the uk http://forum.xda-developers.com/showthread.php?t=914744
FROM SAMFIRMWARE
Firmware: I8700XXKD1. (NoDo)
Filesize: 196+/- MB (.rar file)
XX = Europe
K = 2011
D = April
1 = Version
Firmware: I8700XXKH2. (Mango)
Filesize: 355+/- MB (.rar file)
XX = Europe
K = 2011
H = August
2 = Version
IT'S NOT OFFICIAL VERSION. JUST FOR TESTING PURPOSE.
EDIT : IT'S NOT WORKING ON RETAIL. THEY SAID THEY JUST RELEASED ROM, AND TRIED OURSELVES TO CRACK ROM.
kkw620 said:
It works on Retail Omnia7.
Click to expand...
Click to collapse
The Blogpost on smafirmware says otherwise.
Samsung released in his servers always roms as WP7_Engineer!
We of SamFirmware found a solution to change the system and flash the roms with succes.
We have only one BIG problem. We can't release this
The roms are copyright by Samsung!
What will happen if we release the solution version?
Samsung could make a case in court against us.
Because the roms are officialy not released by Samsung we can't do this.
The only thing we can do is releasing the rom so you guys can try it by yourself.
Click to expand...
Click to collapse
Just tried I8700XXKH2. Doesnt work for me.
It does work on retail omnia 7, but they won't tell us how, or samsung could sue them
so what's the purpose of the release if no one can install it???? I can't get it...
We are working on it, keep watching Omnia's developer forum. There are two ways - there is enclosed .cab.pks with OEM update containing new drivers. If it won't boot after that (aka not updated Radio software), we will have to figure out how they figured it out .
thanks guys, keep going!
Hi all, can anybody explain to me what are differences between WP7_Engineer and WP7_Product? Thank in advance.
i think ondraster method may be correct. if you look at the video posted in samfirmware you can see there that the bootloader version is 5.3.0.4 and not 5.3.0.8 so they managed somehow to replace the 5.3.0.8 bootloader from the kh2 rom
Now I am trying to find whether the WP7_PRODUCT and WP7_ENGINEER differ only in the name, or even the certificate itself. If only name, I could patch the flashing tool to skip the check. If certificate, we are screwed and Ceesheim's phone is maybe stuck with 5.3.0.8 WP7_ENGINEER bootloader (I have a working theory about downgrading to KD1 ROM and waiting for official update with WP7_PRODUCT bootloader).
Oh and I can't simply drop the bootloader update - it is part of the radio update .
I believe in you !
deleted...............
Deploy
Hi all!
I've flashed my Omnia 7 to i8700xxKH2, and it works fine... How can I deploy some apps (like WP7 root tools, etc.) to my phone now?! I've searched all of these forums and topics, but I can't fint the way...
Thanks for helping!
All the best!
i updated too...
but i knew before that you can't load homebrew apps as it's no method yet to developer unlock mango...i hope yet is the right word for now..hopefully not long
hope to replace this word soon...
For whoever might be interested.
It is available since yesterday Sept.12th an OTA update to 3110 GTAB 2 7.0
Can be found on Sammobile firmwares. Select appropriate Type, OS, model, and select "To 10 latest" on the country list.
Scroll all the way down to "OTA FILES" section of the page.
Haven't dowloaded nor tested yet, therefore cannot answer first impression questions.
Happy Flashing
Ottonet
I saw it but there is no country information.
Have you tryed it ?
I have not downloaded, nor tried yet.
Will probably not do that. Firmwares distributed as OTA on Sammobile are often preview, unstable versions, taht could be one reason why it has no country associated.
I shared this piece of information because an official kies release could be near, and I know that many of us are eagerly expecting JellyBean on our tablet.
Ottonet said:
For whoever might be interested.
It is available since yesterday Sept.12th an OTA update to 3110 GTAB 2 7.0
Can be found on Sammobile firmwares. Select appropriate Type, OS, model, and select "To 10 latest" on the country list.
Scroll all the way down to "OTA FILES" section of the page.
Haven't dowloaded nor tested yet, therefore cannot answer first impression questions.
Happy Flashing
Ottonet
Click to expand...
Click to collapse
Also for the P3113
Let the Flashing Begin!!
Thanks OP!
ruben00 said:
Also for the P3113
Let the Flashing Begin!!
Thanks OP!
Click to expand...
Click to collapse
If anyone flashes the P3113 can you please advise if the IR is working....Thanks!
Gregory J said:
If anyone flashes the P3113 can you please advise if the IR is working....Thanks!
Click to expand...
Click to collapse
It is.
Actually, it isn't. Hmmmm
OTA what does not have country in the list contain next regions: BTU, DBT, ITV, KOR, XEF, XEO, XEU (It is can be applied as well on the 4.0.4 BTU, tested by me )
Also there published OTA for Malaysia which contain these regions: GLB,MM1,SIN,SMA,STH,THL,XEV,XME,XSE,XSP,XTC,XTE,XXV
This leak need the P3110XXBLH2 PDA version.
And I see that for France the latest firmware is P3110XWBLI1.
But there is another leak on samfirmware that will install a P3110XXBLH2 PDA version. But it need the original stock firmware without any update even official ...
It looks weird to me.
What do you think about ?
What firmware must I install to install the leak and have jelly bean ?
Thank you.
baallrog said:
This leak need the P3110XXBLH2 PDA version.
What firmware must I install to install the leak and have jelly bean ?
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=8&view=6295
This one will be enough for applying 4.1.1 OTA
I did it.
I've got Jelly Bean on my tab.
Thank you.
But I think there is a problem somewhere ... when I watch the properties of my tablet it show me GT-P3100 !
I've got a P3110 and I have used the P3110 Rom you recommend me and the OTA update for the 3110 ...
How this is possible ?
Have you notice the same thing ?
baallrog said:
I did it.
I've got Jelly Bean on my tab.
Thank you.
But I think there is a problem somewhere ... when I watch the properties of my tablet it show me GT-P3100 !
I've got a P3110 and I have used the P3110 Rom you recommend me and the OTA update for the 3110 ...
How this is possible ?
Have you notice the same thing ?
Click to expand...
Click to collapse
I noticed the same thing, 3110 showing as 3100, also it appears the microphone isnt working
baallrog said:
I did it.
I've got Jelly Bean on my tab.
Thank you.
But I think there is a problem somewhere ... when I watch the properties of my tablet it show me GT-P3100 !
I've got a P3110 and I have used the P3110 Rom you recommend me and the OTA update for the 3110 ...
How this is possible ?
Have you notice the same thing ?
Click to expand...
Click to collapse
I guess that this release is directly derived from the OTA Firmware for the P3100 Tablet, which was released some days ago and is told to run perfectly also on P3110 models.
In fact, what I believe is that this is a test made purposedly with the intent of allowing P3110 to get the P3110OXACLI or P3110OXACLI3 pda's over the air.
The version number you see in the device properties screen is taken from the ro.build.PDA key in the "build.prop" file which is distributed along with every ROM.
No doubts that the final version will have this value updated to match the actual tablet model.
flashing now ...
iGoOsE76 said:
flashing now ...
Click to expand...
Click to collapse
Let us know on how it goes.
so far so good.. im still at work so i haven't played with it. I'll repost later
Ok its pretty stable.... flash and see it for yourself. A lot better then ics
Sent from my GT-P3113 using xda premium
NPNS Or NPN? What are the differences of being versions of the Firmware? I currently have an XT1687 US Version With the NPNS version (I installed it) but I do not know if something changes in those firmware versions
JassyelZ said:
NPNS Or NPN? What are the differences of being versions of the Firmware? I currently have an XT1687 US Version With the NPNS version (I installed it) but I do not know if something changes in those firmware versions
Click to expand...
Click to collapse
In general, all Moto's are like this:
XXX - Original factory flash or initial release
XXXS - OTA Update
The firmware itself is identical.
acejavelin said:
In general, all Moto's are like this:
XXX - Original factory flash or initial release
XXXS - OTA Update
The firmware itself is identical.
Click to expand...
Click to collapse
Thanks youuu!!!
acejavelin said:
In general, all Moto's are like this:
XXX - Original factory flash or initial release
XXXS - OTA Update
The firmware itself is identical.
Click to expand...
Click to collapse
I know this thread is a bit dated but I just searched and found it, as I was curious what the difference in the file names where. Mine is a g5s plus, but it would still pertain to my curiosity. The file I'm looking at are nps and npss.
Thankyou for your simplistic and straight forward answer acejavelin. It clears things up good.
I didn't want to download an india version of the rom, so this helped me a lot, ty ty!
Hi,
I want to root it but I can't find the boot.img for the firmware I have, so I wonder if I should install a newer firmware (software update says it has the latest one... but is nowhere to be found)
So my question is, if I want to install a newer firmware, based on what should I choose it?
should it be by the region I'm in?
thanks
This is a link to the boot image for OXM_XAR version (North America). If your device says 'no updates' then you won't find a newer file to download. If this *isn't* the version you have, search for the latest of your version and extract the various images (that's where this image came from). Cheers
https://drive.google.com/open?id=1j83zhWSQkt_Rj4mK9H8yqzeZFlvT2okO
AsItLies said:
This is a link to the boot image for OXM_XAR version (North America). If your device says 'no updates' then you won't find a newer file to download. If this *isn't* the version you have, search for the latest of your version and extract the various images (that's where this image came from). Cheers
https://drive.google.com/open?id=1j83zhWSQkt_Rj4mK9H8yqzeZFlvT2okO
Click to expand...
Click to collapse
thanks for the reply AsItLies
the one I have is:
M1AJQ.T590XXUOARF8
which I can't find anywhere, maybe is because is from April 2018.
That's why I was thinking if it would be possible to install a newer firmware, which I can download from some websites, and so I'll have the right boot.img
But I'm not sure if I'll end up breaking the device... or what firmware should I choose (in case it's harmless to install it).
aolex said:
thanks for the reply AsItLies
the one I have is:
M1AJQ.T590XXUOARF8
which I can't find anywhere, maybe is because is from April 2018.
That's why I was thinking if it would be possible to install a newer firmware, which I can download from some websites, and so I'll have the right boot.img
But I'm not sure if I'll end up breaking the device... or what firmware should I choose (in case it's harmless to install it).
Click to expand...
Click to collapse
Hmmmm interesting, no update for almost a year? That's pretty sad. My patch is dec 2018?
Check this thread it seems to go into some detail about how to find your version...
Cheers
AsItLies said:
Hmmmm interesting, no update for almost a year? That's pretty sad. My patch is dec 2018?
Check this thread it seems to go into some detail about how to find your version...
Cheers
Click to expand...
Click to collapse
thank you for pointing to that thread, although kies3 and smart switch didn't actually gave me much help, I didn't know about the app "Phone info SAMS", which gave me the data I needed... I still can't find the firmware I have in order to modify the boot.img, but at least I know what country code is (UK-BTU) so I'll try to install the one I found in updato.
Anyone know if the SM-T597 uses the same roms etc as the SM-T590 and SM-T595?
dezzo77 said:
Anyone know if the SM-T597 uses the same roms etc as the SM-T590 and SM-T595?
Click to expand...
Click to collapse
I was wondering about this also, picked up a 597p for dirt and would love to flash it with unbranded/no carrier bloat firmware.
Bonjour, aidez moi pour trouver Firmware Samsung Galaxy tab A SM-T590XXU3ASH1
dezzo77 said:
Anyone know if the SM-T597 uses the same roms etc as the SM-T590 and SM-T595?
Click to expand...
Click to collapse
Quickvic30 said:
I was wondering about this also, picked up a 597p for dirt and would love to flash it with unbranded/no carrier bloat firmware.
Click to expand...
Click to collapse
i hope you both found something im still looking