Dos anyone has this issue? after calling screen automatically locks, I know this was normal on 1.6 but what about 2.1, I'm getting it once in a while
I get it very time I try to call a number that is busy. Seriously annoying too.
Never had it after a call though.
I noticed that this happens if your screen has pin or password lock,but if you lock it with pattern it's ok.
Sent from my HTC Desire using XDA App
Related
Sometimes I notice that my device is on already when I take it out of my pouch.
I left it on my desk once to monitor its behavior... and sure enough, sometimes it will turn itself on as if it is receiving a call, but no call rings. Then the screen dims (as it should) and sits like that for a while.
Has anyone else noticed this?
What causes my phone to come out of sleep by itself?
I'm using the Sprint Mogul version with WM6.
yes, i've noticed usually that happens when i loses reception... don't know how to fix that hopefully someone out there is smart enough to figure it out
My Q did the same thing... it lights up for no reason, then times out like it should. If I don't lock my phone I end up opening a program or calling someone also it has to affect battery life. I have not been able to find out why the phone does this but I would sure love to know how to make it stop.
Do you have any emails setup that are pushed or checked on a schedule?
I find this happens when I am in fringe areas. I think it comes up when you lose service/switch to roaming/etc. I have slide 2 unlock so its really not a big deal.
ppc wakes up to password screen
I know I have read this somewhere but can't remember where I read it but lately I have had this happen. I reach for my mogul to find it awaken and with a screen asking for a password. I never have set a password and leaving password blank doesn't work. I have to soft reset to get out of it. Don't know if this is a mogul bug, wm6 bug, or 3rd party app bug. I have slide2unlock 1.19 installed as well as the Grumps iPhone theme, and HTC Touch Today plugin. Other significant apps installed includes Voice Command 1.6, smartskey, and Live Search 2.0
Anybody know the cause?
Edit: oops, meant to start new thread.
My 6800 randomly turns on and the screen for the voice dialing comes up. I have no clue why this happens but it is annoying and drains the battery faster.
mmaryo said:
My 6800 randomly turns on and the screen for the voice dialing comes up. I have no clue why this happens but it is annoying and drains the battery faster.
Click to expand...
Click to collapse
Could it be that you have a BT headset that is trying to connect to it? I know mine reacts like that- as it should, since the BT should trigger a voice command.
Dishe said:
Could it be that you have a BT headset that is trying to connect to it? I know mine reacts like that- as it should, since the BT should trigger a voice command.
Click to expand...
Click to collapse
yeah that's happening to me too, and my bluetooth is off. it's driving me nuts, i'm almost tempted to just lock the lock on my phone
Hey guys. I am running a 2.1 on my streak. I noticed a very annoying bug that i wonder if anyone knows how to fix. When a call comes in, sometimes the phone stays at the main screen without showing the caller id screen with the option to answer it. Did this ever happen to anyone else?
Sent from my Dell Streak using XDA App
Yep it happens to me, it just vibrates. I end up having to press the phone icon and then going to call in progress. It takes a extra few seconds but not that much of a drama.
Same issue here. I've tried opening the phone app while it's vibrating but just shows the dialpad... What build are you guys on? I'm on 6941
been thinking about updating to the uk official 2.1 build cuz if this and another thing where when I'm on the phone with someone it calls the last dialed number, but not sure if that's from my cheek pressing on the screen or a bug.
Sent from my Dell Streak using XDA App
Since the ota update I can't turn on the pattern unlock without having the slide to unlock staying on also. It's either both or none. Any idea how to just have the pattern unlock? Thx!
Sent from my DROIDX using XDA App
I'm in the same boat as you and it is frickin annoying. Any help out there?
I cant turn off the slide lock at all. How are you turning it off?
Sent from my DROIDX using XDA App
Sorry fellas this is one of the annoyances with 2.2, no way around it. Its either nothing at all or the redunadant slide to unlock then enter pattern. Stupid and annoying I know. Hopefully they patch this with a future update.
I personally don't like having a screen lock at all. When I press the power button to bring my screen back I like it to go right to the home screen.
I know it increases the changes of 'butt dialing', etc, but I have very little issue with that.
At any rate, on 2.1 you could turn off all locks. When I moved to the Froyo leak, I lost the ability to turn off the slide to unlock screen.
Went into the market and found 'No Lock' from BoD. Simple little Toggle program that turns on/off the screen lock.
Doesn't seem to effect the situation with both slide & pattern locks, but does allow you to turn ALL the locks off (like I like )
Hope that helps.
This will also cause all buttons to wake up the phone. The screen lock is about my only gripe with 2.2.
Sent from my DROIDX using Tapatalk
Thanks for the replies. Guess we'll have to wait for a patch then. You can turn off both by going into the security menus btw.
Sent from my DROIDX using Tapatalk
I have a SIM unlocked and unbranded Desire Z (not rooted). I've set the screen lock to 5 minutes and to require a pattern to unlock.
I've noticed that if I let the phone go to sleep, and then after 5 minutes flip out the keyboard, it unlocks it without requiring the unlock pattern. Does this happen to anyone else?
Yeah, I think this is by design. On Windows Mobile there was a reg key to enable / disable "unlock on slide" Maybe there is similar for Android.
Craig
I can't believe this would be by design, it completely undermines the security on the device. How could these be handed out to corporate customers when they can be unlocked by just flipping out the keyboard?
Also the behaviour is inconsistent. If I unlock using the power button, and then turn off the screen, if I flip out the keyboard to wake up again, I do require a pattern to unlock. But if I leave the device for 5 minutes and try again, it lets me straight in.
Ooops, I completely mis-understood your initial post.. The pattern is a sort of PIN screen isn't it..
Ignore me!
Craig
when i slide mine open, it shows me the unlock pattern screen in landscape
earni said:
when i slide mine open, it shows me the unlock pattern screen in landscape
Click to expand...
Click to collapse
Me too, I'm using the pattern also...
salemfox said:
Me too, I'm using the pattern also...
Click to expand...
Click to collapse
I get mixed results. Sometimes mine asks for the password, sometimes it doesn't. I've tried with a PIN, password and pattern. I seem to get the problem more often when the phone has been asleep for a long time, e.g. if I flip it open in the morning when I wake up.
In a way I am glad no one else has this but it's pretty annoying for me!
I get the same problem.
I've also found it to be sporadic. So far i'm thinking there is a pattern depending on what app you have on the screen when the phone locks or sleeps. For instance if its the home screen then it seems to be ok and on waking it prompts for a password. But on other apps it doesnt....
Do you have the same problem if you set the lock time to immediately? Maybe its some kind of problem with the timer.
With immediate lock time I cannot get into the phone without drawing the pattern, keyboard or no keyboard.
mashed_ash said:
So far i'm thinking there is a pattern depending on what app you have on the screen when the phone locks or sleeps. For instance if its the home screen then it seems to be ok and on waking it prompts for a password. But on other apps it doesnt....
Click to expand...
Click to collapse
I think you might have nailed it there. If I leave the mail app open and lock the screen or let it go to sleep, after a while I can unlock it by just opening the keyboard.
cartman09 said:
Do you have the same problem if you set the lock time to immediately? Maybe its some kind of problem with the timer.
With immediate lock time I cannot get into the phone without drawing the pattern, keyboard or no keyboard.
Click to expand...
Click to collapse
I am testing this and it seems to work properly so far. I'll keep it on lock immediately and see if it happens again. This is really crap though. Most users are going to keep the default of 5 minutes and be totally insecure ...
Whenever I get an incoming call and the screen is off, it takes the screen several seconds to turn on. I almost can't answer the call because the screen doesn't come on until the caller hangs up. I'm stock but rooted. Anyone have any ideas? It's really annoying.
Wish I could help. I use the quick window case and the calls display in the window faster it seems because only the top half congress on
Sent from my VS980 4G using XDA Premium 4 mobile app
It's almost like there's screen lag when a call is incoming. I can hear the ringtone and see the LED light blinking but the screen remains black for 4-7 seconds. If the caller continues hanging on...the screen will eventually come on and show the incoming call screen.
This really sucks.
EDIT: I think I figured it out. I froze the Caller Name ID app in TiBu and I guess by freezing it, it caused some issues when calls out come in. Defrosting it fixed the incoming call screen lag. I wonder if it would still produce lag if I were to completely uninstall it?