Not sure if its my phone and it needs to go back.
At the earpiece there is a flat spot that runs across and then another one just below it.
Seems like the process to get the curve threw them a little since its wavy all over but that is something you have to look for and can look past. The earpiece area is what I am most concerned with. Would like to know if others are seeing this.
would you be kind enough to post a picture?
Probably have to pull out the gear to do that but will be taking pics of the vibrant tomorrow so can do it then.
If you look at the speaker and then to the right and left of it there is a flat spot that runs through the glass from side to side if that makes sense.
Either way I will get pics up tomorrow.
post pic..
I don't see anything on mine.
Here are the pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It could be designed into the screen but there is another line under it and its not real pretty when the phone is sitting on a desk and you see that. Guess I am just used to the flat smooth screens like the other galaxy s phones.
Is it like, indented into the glass? Looks strange
Mine doesn't look like that. Mine is smooth throughout.
Ok I see it in the pics. That kinda stinks I thought Google said the design was to be the screen blending in to the phone. Bummer.
Going to the store tomorrow and checking out others. If it was a common issue I would just deal with it. Oh well.
r34p3rex said:
Is it like, indented into the glass? Looks strange
Click to expand...
Click to collapse
It is. Its a flat spot and I can see why its there with the speaker hole there and the cam and prox sensors. Seems they could make a smooth transition or I got a dud.
Take it back and get a new one.
Seems like a hardware defect, I don't see that on mine.
Sent from my Nexus S using XDA App
I also noticed that on the first one I got, although not as defined. The issue I had was with the plastic ring around the screen. It was deformed in a few areas. I returned it for another one. This ones perfect. I suggest you do the same.
Sent from my Nexus S using Tapatalk
I have it too.. but not as bad as yours. I have to really use the glare to see it.
I have the same thing...cant notice unless it has light glare on it.
I think pics make it look worse but you can always return it.
Maybe it's flat cuz of the front camera and the light sensors.
I can't tell on mine, unless i have light reflecting on it (like in your pictures)
leyvatron said:
I have it too.. but not as bad as yours. I have to really use the glare to see it.
Click to expand...
Click to collapse
Thats what I am wondering. I had to use the light to get it in the pics. I deal with glass all day so see these things more then the average person. The bottom is nice and smooth . but the top is a different story. I wonder if others have this and just don't notice it. I hope not but maybe the pics will help others see what I am seeing and give a definite answer.
Either way I am going to go check out some others at BB tomorrow and will report back with what I find.
It may not be a issue at all and part of the design of the phone.
same here but i didnt notice it until you mentioned it.
No problems here on mine. Weird.
Sent from my Nexus S using XDA App
Crap. In the kitchen light I can see it now. Fffuuuuuuuu
Sent from my Nexus S using XDA App
Related
Is it possible to paint the battery cover using the method described here:
http://forum.ppcgeeks.com/showthread.php?t=46487
I want to change the battery cover from the gold, on my white G1, to white.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pretty sweet if ya ask me, I think Ill be doing the orange/yellow this sunday. My back case is messed up anyways so Ill scrub it down and give it a shot.
that picture is the reason I wanted to try it. Let me know how it goes when you do it. I would do it to my G1, but I'm trying to sell this one in order to get a new one
any updates?
Seriously I want to see what the g1 looks like painted. Back in my Nextel hacking days, I use to paint my devices, I always did a pearl with a few clear coats. I have never tried a "flat" color, it looks good though. Someone paint your phone.
Taping off the cam window woulnd't be too hard, but i'd want to keep the "with google" and keeping the speaker holes open would be a pain.. Maybe stick 9 toothpicks through from the inside?... Someone try it damnit. Haha
According to the thread at ppcgeeks, they didn't even need to take off the camera window.
ill be doing this today most likely...if not, tomorrow for sure . ..
im trying to find my extra backing...
jaboswell said:
ill be doing this today most likely...if not, tomorrow for sure . ..
im trying to find my extra backing...
Click to expand...
Click to collapse
keep us updated!
Man I want that blue soo bad, but I don't want to take apart the front casing of my phone.
still trying to find the extra backing i have...if i cant find it ill just do the one I have and hope if i screw it up tmobile gives me another...lol...running to walmart right now!
harpreet1988 said:
According to the thread at ppcgeeks, they didn't even need to take off the camera window.
Click to expand...
Click to collapse
Dude TAPE not "take". There is no possible way to not tape off the camera window and not paint over it rendering it un-usable...
mr2man07 said:
Man I want that blue soo bad, but I don't want to take apart the front casing of my phone.
Click to expand...
Click to collapse
I don't think you can paint the front casing, since it's not as rough/grippy as the back cover.
CBowley said:
Dude TAPE not "take". There is no possible way to not tape off the camera window and not paint over it rendering it un-usable...
Click to expand...
Click to collapse
....If you read the thread, the person didn't do anything to the camera window. They neither taped it off, nor took it off. Since it's really smooth, the dye has nothing to stick on.
harpreet1988 said:
I don't think you can paint the front casing, since it's not as rough/grippy as the back cover.
Click to expand...
Click to collapse
True. I want to do this but i think it would look kind of weird to have a two tone like that..
I wanted to paint my battery cover white, but I'm not sure if walmart has white dye.
im still trying to find the white back i have...got a blue dye.....
i dont think you can do dye black backs...its already the darkest color possible..unless im wrong..but thats why i realized i cant use the black back i have now.
Oooops didn't read it, assumed it was paint. I apologize.
No updates?
Anybody attempt this? Or going to soon?
Got bored after having a red housing for a while, so I decided to change it.
Let me know what you guys think. Any suggestions? What colors would you
like to see. Only took me about 3 days for primer, paint, and clear coat.
****Camera bezel is all chrome color, and kickstand is flat black. Forgot to mention that in original post.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
awesome, very sweet looking
That as got to be the hottest mod yet! How'd you do it?
Bro that looks great, I would like to see titanium-like color.
Sent from my Evo [CM7] running Pure Googleâ„¢
Thanks all. The process isn't all that difficult to one thats familiar with painting and modding their electronics. Ive been painting xbox 360s and figured that the back housing on the EVO is just smaller but really the same concept. I wish I had actual auto paint available and the skill to use it cause I know it would look 1000x better. This is just simply an primer, an enamel, and flat clear coat. Sad to say but over time the clear coat and paint will come off and I'll be back at square one. But thanks for the praises so far.
Im not hating brah, but do you think that clear is going to hold up? I mean with use and all.. Does it have a hardener in it?
mroneeyedboh said:
Im not hating brah, but do you think that clear is going to hold up? I mean with use and all.. Does it have a hardener in it?
Click to expand...
Click to collapse
Dont worry I know where youre coming from. And I agree 100% that it will not hold up in the long run.
What you should do is run the matted blue theme, and paint it to match. Go for the full matted blue look. Looks great as is though, if a bit bright
Sent from my blah blah blah blah
Why does you phone look like it swallowed two batteries?
Sent from my PC36100 using Tapatalk
also which battery door is that? I like it better than the ebay ones.
Nice I want to see one just like that but with red instead of yellow. Looks nice.
Sent from my PC36100 using XDA App
mroneeyedboh said:
also which battery door is that? I like it better than the ebay ones.
Click to expand...
Click to collapse
Its the extended battery door that came with the battery from Sprint. $54.99 is a lot but I dont have battery issues lol.
sand1303 said:
Nice I want to see one just like that but with red instead of yellow. Looks nice.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Red is what color I had before. My co-workers said the phone looked like a pair of Jordans. I will post pics of the Red in the morning.
Automobile Paint Markers
There is a range of markers which apply auto enamel, from Uchida , called DecoColor - opaque paint marker. http://tinyurl.com/35kmq6t
Nice contrasting look btw.
That looks sick! I can barely make a dash of red through the speaker holes, but it's a minor quibble. This looks amazing. If you can get a more permanent application set, I bet a lot of people would give good money for this mod. Well done. Very impressive.
Swyped from my EVO
Its a bumblebeevo! Looks nice! Id like mine to have that light, glow in the dark green.
That is awesome, im going to try this on mines
kr1m3boss said:
That is awesome, im going to try this on mines
Click to expand...
Click to collapse
Do keep in mind that if you have to take your phone to sprint, they will most likely flag your phone as "Damaged beyond repair" and thus causing you to claim insurance. Yet again I stress, this WILL void your warranty.
"I fight for the Users" and replied from my EVO
how did you do the chrome around the camera?
Simply did a wet sand and all the red came off
Hi Folks,
Well, I've had my TF for a few weeks now and its been great !
I use my Dock almost every day, mainly to provide more juice etc ...
Anyhoo .. i also use a Poetic case on the pad which i rarely take off, even when its docked. Today though i noticed a wear mark on the rear of the tablet and couldnt figure out where it came from .. untill i noticed that its in the same place the dock bracket edge is
It seems to effect one side more then the other (Right side... Left if you look at it from the back )
Has anyone else noticed this? .. The felt inside the dock bracket is still there so i dont know why it would cause it to rub ... and its only been a few weeks !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rly ... remove the ASUS Model sticker
im still rocking my stickers too its been months
OP: Now that you mention it, I do notice some spots on the back of my tab that aren't as shiny as the rest of it. Thanks for pointing out something I probably would never have noticed. >.<
Seriously, though-- I don't really care at this point. Perhaps I would if it was noticeably discolored.
xyellx said:
rly ... remove the ASUS Model sticker
Click to expand...
Click to collapse
Why for? I still have mine on.
I have used the dock everyday for atleast 2 months, sometimes inserting and removing several times a day and I dont see anything. Guess I'm lucky
Sent from my Infuse... Love it!
saw the one at bestbuy and that one is marked pretty badly.
I have the same thing on the same side of my tablet as the OP.
My guess is that adding a little padding like a small piece from a micro-fiber cloth on each side of the dock may prevent further wear.
I know there is a felt-like material already there, but beefing up the padding may help. I haven't done anything to it
since it doesn't seem to be too severe.
Im going to do the same :-( its wierd it doesnt seem to happen with everyone though.
Small differences in manufacturing are to blame, its not really something they'd be able to see when making the device.
I also have a dock that does not lay flat when the tablet is docked and opened, it teeters a tiny bit and if it is on an uneven surface it will pivot around unless I hold it down.
Seriously... you are worried about cosmetic issues!
I'd be more concerned if my TF was overusing the battery, or the wifi reception was poor and dropping out of service.
Had it been a case of the screen was coming away from the casing or one of the ports was failing then yes I would understand.
Surely the basic operation is what you should be concerned about... not how it looks.
Beards said:
Seriously... you are worried about cosmetic issues!
I'd be more concerned if my TF was overusing the battery, or the wifi reception was poor and dropping out of service.
Had it been a case of the screen was coming away from the casing or one of the ports was failing then yes I would understand.
Surely the basic operation is what you should be concerned about... not how it looks.
Click to expand...
Click to collapse
Well ... Put it this way .. When i noticed it, i wasnt shaking like a ****ting dog!.
Alls im saying is its not supposed to wear like that within a few weeks.
Its works as it should, battery life is superb etc etc...
You may not like your stuff to look good, but i prefer to keep my belongings in a decent condition also helps when/if you want to sell it on ...
Does your SGS3 have a gap down the left hand side of the screen?
Is dust building up in it?
If so, post a photo, if you can
I am returning my first SGS3 today as there is a gap between the glass and the casing.
Dust is building up in it and it looks rather unsightly.
I was just wondering if it's just me or not.
Can you see the line of dust down the left side of the screen?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No gaps here. Mines is nice and tightly sealed up.
Sent from my GT-I9300 using xda premium
Mine has a small gap but I can't see it with the case it's in.
OP are you sure its not a HOX you're using? ;-P
I have got another one, but im afraid its still the same.
To be sure, I'll have to have it for a few days and see if any dust accumilates in it.
I looked at another one in phones4u and the screen is perfectly alligned.
Dont have it. Take some tooth brush and clean it.
Sent from my GT-I9300 using xda premium
Oh, yes I have a gap now you mention it..
zmsudu said:
Dont have it. Take some tooth brush and clean it.
Click to expand...
Click to collapse
I don't think the bristles of a toothbrush would get in the gap to be honest.
That's bedside the point anyway It should be perfect!
johnboywilson said:
Oh, yes I have a gap now you mention it..
Click to expand...
Click to collapse
+1
vinokirk said:
I don't think the bristles of a toothbrush would get in the gap to be honest.
That's bedside the point anyway It should be perfect!
Click to expand...
Click to collapse
I just ran my nail along the gap and managed to dig out the few flakes of dust in there, so a toothbrush should work fine.
afaik all the samsung mobiles i have used had micro gaps, its the way it is designed. cant notice the gap in s3 as it is white, but it will have it surely.
btw the micro gap is required to absorb the shocks. else all the shock will reach out the screen easily.
The problem I have is that on the left side the gap is quite substantial. Where as there is no gap at all on the right side.
It's like the whole glass part it too far over to the right.
I have seen another blue S3 at Phone 4u and there it an equal gap on either side; so I know for sure there is a problem with this batch at the 3 store.
My white one has no such gap. At least nothing I can discern anyway...
vinokirk said:
I don't think the bristles of a toothbrush would get in the gap to be honest.
That's bedside the point anyway It should be perfect!
Click to expand...
Click to collapse
Use this. It's fantastic at keeping nooks and crannies of electronic devices clean.
http://www.cyberclean.net/cleaning/en/Products/HomeOffice.html
Yeah cyberckean is pretty pro.
Also, thumbs up for everyone who is now inspecting the edge of their phone for the first time?
I have a little gap at the top of my screen, but its not gathered any dust.
Sent from my GT-I9300 using xda premium
You are not the first to bring this issue up, so I'm thinking many people have this issue but only a few of them will notice it.
demonwind said:
You are not the first to bring this issue up, so I'm thinking many people have this issue but only a few of them will notice it.
Click to expand...
Click to collapse
I thought there was one, it is moving slightly. But guess that's good, firmness bad for drops.
It is also an optical illusion! Depending on the lighting angle. Does it look like a big gap on the left? Flip the phone upside down, the gap is still on the left it doesn't flip. Not worried now after noticing it, you had me for 20sec.
Sent from my GT-I9300 using XDA
So I was unlucky enough to drop my N4 before I was able to get a case for it. I dropped it from my lap while getting out of a taxi so it wasn't a full on drop. At first I thought the only damage was cosmetic - a nick on the chrome trim on the top right corner of the phone.
However afterwards I noticed a small white/bright spot on the screen near that corner where it looks like the backlight is bleeding through. It's most notice-able when the screen is showing something white, less notice-able with colors (red, green, blue etc), and completely fine when showing black.
I've checked some info and it doesn't seem like it's a dead pixel, and just seems overall larger than a dead pixel. At the same time it doesn't seem like a lit pixel either since it's not visible on black. At the moment I'm very thankful that the phone is still very much use-able, but would like to find out what the problem is, and perhaps how intensive a repair this would involve since it is a bit annoying sometimes.
Anyone have had a similar problem or have any ideas?
Is normal. Stop obsessing about it. No phone is perfect. Even my wife's iPhone 4s has defects. If you are looking for flaws, you will find them, guaranteed. Just use your phone like you used to.
Sent from my Nexus 4 using xda premium
jamesc760 said:
Is normal. Stop obsessing about it. No phone is perfect. Even my wife's iPhone 4s has defects. If you are looking for flaws, you will find them, guaranteed. Just use your phone like you used to.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yeah I'm definitely learning to live with it. It may also not look so bad in a photo but it's still pretty noticeable when you're holding the phone in your hand - especially when I'm scrolling around and you can see this static white spot that doesn't move.
Just overall interested in what the problem is as well. I've seen dead pixels and also phones that were dropped where the screen looks completely fubar'd... but haven't been able to find any examples where the screen is like this.
RMA if it's that annoying. Assuming ur phone doesn't look too damaged that they'll say it was your fault.
I do see a few scratches on the screen. Google may not RMA for that reason. If there is another reason like a defect, use that to RMA. IML no Nexus 4 is perfect. I have RMA'd about 4 times till now with a new reason every time. Now after completely blocking my credit card, I have learned to live with an imperfect Nexus 4
Sent from my Nexus 4 using Tapatalk 2
ak700 said:
I do see a few scratches on the screen. Google may not RMA for that reason. If there is another reason like a defect, use that to RMA. IML no Nexus 4 is perfect. I have RMA'd about 4 times till now with a new reason every time. Now after completely blocking my credit card, I have learned to live with an imperfect Nexus 4
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Where do you see the scratches? I haven't even noticed them!
I guess from the replies I should learn to live with it then. Thing is I really thought this was due to the drop, but it's also possible it was a defect that I didn't notice... I saw some N4s with the light bleed problem, but were from the edges of the screen, that's why I really thought this was due to damage.
Send it back in, duh. It's still under warranty. :crying:
Robogar said:
Where do you see the scratches? I haven't even noticed them!
I guess from the replies I should learn to live with it then. Thing is I really thought this was due to the drop, but it's also possible it was a defect that I didn't notice... I saw some N4s with the light bleed problem, but were from the edges of the screen, that's why I really thought this was due to damage.
Click to expand...
Click to collapse
Check these -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know whether these are scratches or camera problems.