Related
I broke the screen on mda and purchased a replacement but I think i fried my main board during the installation of the lcd. Is anyone selling a mainboard for the wizard or know where I can find a mainboard? I have checked on ebay and have found broken phones with bad usb connectors or headphone jacks. I don't need that. If anyone is selling a mainboard for the wizard as well as the housing, as long as its in good condition, please let me know. Thanks --> Mistawright
Are you sure it's dead??
mistawright said:
I broke the screen on mda and purchased a replacement but I think i fried my main board during the installation of the lcd. Is anyone selling a mainboard for the wizard or know where I can find a mainboard? I have checked on ebay and have found broken phones with bad usb connectors or headphone jacks. I don't need that. If anyone is selling a mainboard for the wizard as well as the housing, as long as its in good condition, please let me know. Thanks --> Mistawright
Click to expand...
Click to collapse
I've just received a new screen for mine from HK. When I first put it in all I could get was a white screen, nothing else.
After ages of stripping down etc I found that it was the screen connector causing the grief - tape it down with some electrical tape and away it went.
Got versed in the art of connecting the screen to the main board and holding the battery in place at each stage of the re-construction to ensure it was still working.
I dropped mine and had vertical lines on the right side of the screen. Now, with the new screen in, initially it was fine but has just started wavering a little on the right side, so I may have had more than just a screen issue. Still as long as it lasts until my Kaiser arrives from T-Mo I'll be happy.
So are you selling a mainboard or not? If you are not what was the point of your post?
mistawright said:
So are you selling a mainboard or not? If you are not what was the point of your post?
Click to expand...
Click to collapse
The point was in the subject of the reply: ARE YOU SURE IT'S DEAD?
I offered help based on my experience changing the screen and questioning wether your mainboard was really dead or not.
But if you don't anybody offering advice and only want to buy another mainboard without really checking if yours is dead or not then I'll shut up.
lets start from the beginning.
1) I broke the screen.
2) the phone would power on but cracked screen.
3) I bought a replacement
4) after taking the phone apartment and replacing screen phone does not power on
5) Amber light does not come on on phone when connected to charger.
Instead of suggestions like the topic of the thread says I'm looking to purchase a working mainboard or a phone with a cracked screen that works at a decent price.
Hi,
Did you follow any replacement doc to do the job? Or you just started alone? I asked you cause I got a LCD for my friend and together we replaced it without any problems. Everything is working fine! Remember that exist many pitty hardware parts during the process you should care about it. If you missed or have broken one of them, you'll probably fried the main board or similar component!
mistawright said:
lets start from the beginning.
1) I broke the screen.
2) the phone would power on but cracked screen.
3) I bought a replacement
4) after taking the phone apartment and replacing screen phone does not power on
5) Amber light does not come on on phone when connected to charger.
Instead of suggestions like the topic of the thread says I'm looking to purchase a working mainboard or a phone with a cracked screen that works at a decent price.
Click to expand...
Click to collapse
The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?
Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.
Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Seems a little unfair if they don't seeing as the HD is purely touch screen!
SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item
Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.
Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...
I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.
Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?
Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?
some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best
Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326
You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!
I have just got my replacement digitizer in the mail 2day from Hong Kong and installed it just now, all is working perfectly as new again. I did a hard reset when the touch screen was first playing up, so I have lost all my themes, settings etc but luckily my office docs etc are still intact.
Anyhow, I made a video on how to replace the touch screen, its only quick as I did not go from the disasembly part, as there is already videos and tutorials on this, so I just documented on the actual digitizer replacement, which is actually basic 2-5mins work, but I thought a vid would be good for any noobs needing it in the future.
Once I edit it all up I will post the video here.
If anyone needs help on replacing the digitizer just ask. DON'T be tricked into buying the LCD + Digitizer if you only need the touch screen, as it is very easy to do without the lcd, though some ppl disagree.
Thanks for reading, thread will be updatd with Vid asap.
Hi X86
I have a crack on the upper plastic case, thats prob. why I have dirt showing on screen. In your opinion where is it located and can I clean it ?
It seems as if (if the crack is on the actual original housing, not just a add-on case) that dirt/dust has fallen down inbetween the digitizer and the LCD, so you can see it through the touchscreen right?
This is fairly simple to fix, you will either need to patch up the crack with silicone or something (best from the inside so it does'nt look messy) OR buy yourself a whole nw housing which cost about US15-$20.
Then just pull your elf/in apart and use cotton tips and wipes to thoroughly clean the LCD and insides.
If you need any help, just let me know via PM or here.
?Good Luck!
Thanks
That was my feeling, now I just need courage to take apart the casing (either repair or replace )
Thanks for bringing up this issue in the forum and extending your hand to others.
I appreciate it alot.
Hi x86
I have read the sticky for disassembling the elf. Can you tell me if it's necessary to unscrew anything and remove the rear speaker in order to remove the front panel ?
Edit: I think I found the answer in the next pics, the 4 screws attach to the front panel, right ?
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
bjonmy said:
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
Click to expand...
Click to collapse
That sounds like both a Digitizer and LCD issue.
Red and white strips is caused by the screen, while the phone not sensing your fingers is caused by digitizer.
But you still managed to use something like mymobiler to rescue your stuff right?
Yeah, you're in Malaysia right? In Singapore, to get this items, we have to get it off ebay or dealextreme.com.
But be careful with this, it void warrenty.
If you send it to HTC service centre, it may cost $160> Singapore dollars.
Cheers,
Jeremy
Hello Gents and Gals. I am trying to fix my friends HD2, I flashed his ROM with Energy couple of months ago and all was working fine. He gave the phone back to me saying that it is locked.
I tried unlocking the phone but it seems that the screen is unresponsive, so I flashed it again by going into the boot loader screen "Volume Up + Power Button". The phone stated that it is starting for the first time but the screen was still unresponsive. Any ideas on how to fix this issue? Or do I need to tell him to send the phone back to HTC for repairs?
Sounds like the touch screen died ....
Time for a repair ..
Also this really should have been posted in general , as it is not a ROM release , just an FYI
Aww okay. I'll let him know. Thanks.
I'll post like this in General next time. Tks.
HI, I have now the same problem after ROM Flashed, did you solve the problem by yourself, or really the touch screen died.
Rgds
Same thing with me. I ordered new digitizer+LCD and changed them, but the screen is still unresponsive. Other ROM didn't help.
Some advices?
i seen this happen with several phones, reflash to stock and send to HTC they will repair it for free.
I have same problem,yet my phone was bought 18 months ago...worked perfectly until now.
Can a touch screen get defective after normal usage ?
alexandruvlad said:
I have same problem,yet my phone was bought 18 months ago...worked perfectly until now.
Can a touch screen get defective after normal usage ?
Click to expand...
Click to collapse
Yes it can, if your touch functionality of your HD2 has stopped working then your digitizer has probably went out.
T-Macgnolia said:
Yes it can, if your touch functionality of your HD2 has stopped working then your digitizer has probably went out.
Click to expand...
Click to collapse
Yeah,that's what i thought too - but i read some situations where replaced LCD + Digitizers didn't solve this problem.....
alexandruvlad said:
Yeah,that's what i thought too - but i read some situations where replaced LCD + Digitizers didn't solve this problem.....
Click to expand...
Click to collapse
This is usually due to the replacement components not being properly installed. Also when one is working with the internals they have to be very careful as some of the internals are very easy to break without you even knowing you did. So the cases you spec of are more than likely not because it was not the Digitizer or LCD was not the problem, but human error.
i fixed mine and it didnt cost me
the unresponsive screen maybe the digitizer buts its more likey the end call button, believe it or not dirt can get behind the contact or because the back button is next to we use the far edge of the end call button thus leading to bending the contact, when any of this happens your screen will be unresponsive
you can either take it to a shop and pay for a new screen and digitizer or take it apart and clean the contacts
go to ifixit for step by step guides
hope that helps
Intrigued
dgr1983 said:
... buts its more likey the end call button, believe it or not dirt can get behind the contact or because the back button is next to we use the far edge of the end call button thus leading to bending the contact, when any of this happens your screen will be unresponsive
Click to expand...
Click to collapse
I have no idea what are you talking about, that doesn't make sense, as far as I know is no direct relation between END button and (non-working/responding) touchscreen: you may even disconnect/replace bottom buttons ribbon/flex from motherboard and touchscreen will work if OK(or not, if defective).
Is there anybody who can confirm this(or not)?
3 weeks ago I had a LCD/digitizer replaced (cracked screen, but was still working) all was great till 2 days ago. Screen stopped working - took it back to the place I had replace the screen and they tried 3 brand new screens and still no go. Ended up being my main board - luckily I had a spare HD2 and they pulled that board and all is well again.
Believe it or not your LCD/digitizer might be fine - find someone or a way to test main board would be where I would start after the last 3 days.
Good luck
PS - I did NOT try the end button idea prior to the repair.
Zergalot
zergalot said:
3 weeks ago I had a LCD/digitizer replaced (cracked screen, but was still working) all was great till 2 days ago. Screen stopped working - took it back to the place I had replace the screen and they tried 3 brand new screens and still no go. Ended up being my main board - luckily I had a spare HD2 and they pulled that board and all is well again.
Believe it or not your LCD/digitizer might be fine - find someone or a way to test main board would be where I would start after the last 3 days.
Good luck
PS - I did NOT try the end button idea prior to the repair.
Zergalot
Click to expand...
Click to collapse
If still in your possession, I would be interested to buy the motherboard you just replaced!
PM me if interested!
htc hd2 screen died
I also have a 2009 htc hd2 on which screen does not work.
I'd like to know if it's
- a common problem
- is it possible that it's a software (flashing) issue
- can it be replaced and for how much
martinmartiini said:
I also have a 2009 htc hd2 on which screen does not work.
I'd like to know if it's
- a common problem
- is it possible that it's a software (flashing) issue
- can it be replaced and for how much
Click to expand...
Click to collapse
From my own experience :
1. It's a common issue, there are hundreds of reports in this forum and I read them all because I had the same problem some months ago
2. Probably not. It's generally hardware-related and often the digitizer (touch responsive screen) . Brief explanation : There's a flaw in the design of the HD2, the thin cable wiring the digitizer to the motherboard, is just below the power button. After some extensive use of your powerbutton, it might happen that the power button touches the cable and cause some kind of shortcut in it which makes the digitizer unresponsive to the motherboard.
3. I replaced mine here : http://www.htcphonerepairs.co.uk/ . Fast repair, secure shipping to Belgium, good price and excellent customer support. (Sounds like advertizing but I swear to be only a happy customer )
There are also multiple videos on youtube explaining how replacing the digitizer yourself if you dare !
Also, I read answers saying that you can somewhat "play" with your buttons (especially the power one) to turnaround the problem. That's correct, BUT it's absolutely inevitable that the problem with come back again if you use the buttons, and you'll have to force more and more to unblock again and repeat again and a again... and that will damage your button bar.
I did this during almost 2 months and that put down all my buttons and now they are really close to the chassis which is very annoying. If only I knew it before I would have replaced the digitizer directly !
For 6 months with my new digitizer + using ICS with soft buttons, I have no problem at all !
bib*oops said:
I have no idea what are you talking about, that doesn't make sense, as far as I know is no direct relation between END button and (non-working/responding) touchscreen: you may even disconnect/replace bottom buttons ribbon/flex from motherboard and touchscreen will work if OK(or not, if defective).
Is there anybody who can confirm this(or not)?
Click to expand...
Click to collapse
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Sneakyghost said:
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Click to expand...
Click to collapse
This is truth. Save yourself some time and frustration and repair it or get it repaired. It's a great phone.
Sneakyghost said:
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Click to expand...
Click to collapse
You didn't get it right or at all:
END key may determine touchscreen failure along the time(being the CAUSE! of this), but the EFFECT is an unusable touchscreen, which cannot be repaired in any other way than replacing it(the touchscreen!!, I mean).
Any other attempt to repair, clean, bend, press, cut or whatever WILL NOT FIX an already faulty touchscreen (even caused by END button excessive or not usage) and who thinks otherwise, no problem with me: SWEET DREAMS!
You sound like my comment hurt you. Sorry if it did. I'm not one hundred percent sure that this issue can be fixed without replacing the screen, yet fairly certain. I've now disassembled two HD2 and couldn't quite find the precise spot where the damage occurred, yet after properly assembling the devices again, one came back alive, the other not. The one which has the screen and buttons not working right is the one that got thrown at me by a kind person. It most likely has physical damage somewhere, although I couldn't locate it. The other one didn't get damage and has screen and buttons work well after complete disassembly and assembly.
Both devices also have different screen types.
I now gave up both devices and am withdrawing myself from the HD2 world. Too many issues with the devices getting old.
sent from the tip of my finger
After reading several posts to find a cure for my HTC HD2 unresponsive touch screen,( Slider wont slide to open applications), I decided to verify a theory. Software... Digitalizer screen, or power button.
Ok, first I Instelled about six different android versions, and the screen slide still failed. I reverted the cell back to original t-mobile windows software, and still locked screen.
Conclussion: The sofware is not the problem.
After several attempts pressing the red power button, I got the slider to open. Briefly, it locked again. Pressed the red button hard and tried to work the slide on the touch screen. Again briefly worked. After several more attempts I got it to slide and while the phone was awake, everything worked perfect. I played games, oppened applications, texted, made phone calls, and the touch screen worked flawless.
Conclussion: The digitalizer (Thin top glass screen on top of the display that responds to touch) is not the problem.
This led me to belibe that the power button was at fault. I called T-mobile and after explaining the problem, they decided to send me a different type of windows cell. I want my htc. So I declined the offer and decided to void the warranty and take matters in my own hands. Yes, I opened my HTC HD2. This is what I found: After about an hour I had carefully taken my htc apart without braking or scratching the phone or screen. When I finaly got to the buttons on the bottom, I noticed how cheap they where made. A thin copper circle on top of two contacts held in place by tape. Yes you heard right, tape. After a while, beating on the red end key for maybe a year or two, the tape brakes and the metal piece slides to the side, and makes the button to malfunction, that's why the hard pressing to make it work. I tried A bottle of comppressed power air to clean them before disassembling the phone but the way they are installed It's not possible to clean them like that.
Conclussion: The red end key is faulty.
I decided to keep the cell alive so I went on e-bay and ordered the buttons, and just in case I also got a new digitalizer for testing purpose.
The buttons panel was about 4 dollars and some change, and the digitalizer (touch screen) was about 14 dollars for a total of less than 20 bucks. (Worth it)
So here are some pics of my cell buttons, and what it should look like. After I get the parts and assemble it I will conclude and let you know the final and official veredict. As of now, it all leads to the button.
Please do let us know how you got on. I have a HD2 which I'd like to get up and running again so I can play with custom roms and leave my other mobile alone...lol. Any chance you could link to the places you got parts/tape from, and what tools we would need?
Cheers! :good:
Did it worked ??? i am also in the same situation...please share the details,
bijeeshvs said:
Did it worked ??? i am also in the same situation...please share the details,
Click to expand...
Click to collapse
+1
listening in as well
sheesh! my wife's HD2 also stop responding yesterday, seems like clockwork that a lot are having the same problem
first have to find "how to open your HD2" w/o breaking anything in the process :silly:
Damn. The second time I'm hearing about the red button giving problems.... Will be waiting results from you dude!!! +1
still wayting for the parts
Well, I am still wayting for the parts, they are on the way. The parts I found on E-bay. The buttons panel was about five or 6 dollars, I also got the digitalizer which was about 15 dollars. As soon as I get the parts, I will assemble my hd2 with the original digytalizer (the thin top screen) and test to make sure the buttons were the problem. If all goes well, I will post a complete test result with links to how to get the parts, a link on how to dissassemble the hd2 and all info I can to help on this issue. I did a step back in life, and pulled out my trusty 7 years old motorola razr v3 and stuck my sim card so i can talk and text 5 words in 7 minutes. No internet... I need my HD2... Well, I will report back as soon as I can. Thanks for the wait...
@dragonsuicida
will be waiting for your findings & ways to dis-assemble the HD2 :fingers-crossed:
You were lucky to find the buttons' panel for 4bucks. I just checked out Ebay india, and the panel is 40bucks!!! What a robbery!
Wow. Me too!
I have been running Win6.5 still on my HD2, and have found in the last few days, my screen locks and I can't unlock it.
I came here deciding it was a software issue and was going to look into putting Android on my HD2.
I was slowly coming to the conclusion that it was the power button.
If I make an effort to NOT touch it - my phone seems happy.
It's amazing that we're all having the same problem about 2 and a bit years down the track since the HD2 was released - almost a built in expiry!!
And yeah - lots of details on how to fix it would be great.
The HD2 is too good-a-piece of hardware to allow a ****ty hardware button to be the cause of it's death.
New Keypad Button Flex Cable Ribbon For HTC HD2
Copy this:
New Keypad Button Flex Cable Ribbon For HTC HD2 T8585 and paste it on ebay, it will bring the buttons for the htc hd2. I belive they all come from china, but after I test them I will let you all know if they work and if they are worth it.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
copy this: http://www.youtube.com/watch?v=YdOC3Xxo_k0 and paste it on your web browser, and it will lead you to a video on How To Replace Repair Disassemble Screen Digitizer. When it gets to a part that say that you have to put the phone in a oven, is just to melt the tape or glue holding the screen to the phone. I just used a hair dryer to war the screen enough to carefully remove the screen and the digitizer from the phone without breaking them, It works. I will be back soon with more info. I believe my digitizer screen is on the mail box now. Will report back...
I have same problem. Today I bought a flex cable ribbon and waiting for the dispatch (estimated in 2 days). I will also report back..
Same problem here!
Hope to hear soon that this is the way to go to fix it
You have to stick back the tape in the housing. The tape is electrically conductive. It connects the ground of the keyboard flex cable with the ground of the housing.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
Click to expand...
Click to collapse
Be careful! There are two types of digitizer:
- Solder version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-solder-version/
- Socket version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-socket-version/
Be very careful when ordering parts, specially the digitizer they have several kinds, solder and socket, and different socket sizes. Compare parts with the ones in your cell to make sure, don't just believe the advertisements.
Hi, any updates on this? I'm also having this issue, but in my case, even pressing end call really really hard doesn't solve the problem... snif..
+1 on that
i pressed all the keys even the lower part of the LCD & flashed new roms but no joy :crying:
will bring to shop instead I'm afraid to open it up, it might end up even worse
Just be extremely careful when you try this. That flex cable is so incredible fragile and easy to tear. My roommate tore the volume rocker section right off of his HD2.
Hi dragonsuicida
Were you able to get your touchscreen to work?